Received-SPF: pass (google.com: domain of linux-kernel+bounces-193071-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
Date: Tue, 28 May 2024 23:49:26 +0300
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: linux-pwm@vger.kernel.org, Bartosz Golaszewski <brgl@bgdev.pl>,
	Conor Dooley <conor+dt@kernel.org>, linux-kernel@vger.kernel.org,
	Alexandru Ardelean <alexandru.ardelean@analog.com>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Lee Jones <lee@kernel.org>, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org,
	Uwe =?utf-8?Q?Kleine-K=C3=B6nig?= <ukleinek@kernel.org>
Subject: Re: [PATCH v2 1/4] dt-bindings: Add bindings for the Analog Devices
 ADP5585
Message-ID: <20240528204926.GE8500@pendragon.ideasonboard.com>
References: <20240528190315.3865-1-laurent.pinchart@ideasonboard.com>
 <20240528190315.3865-2-laurent.pinchart@ideasonboard.com>
 <171692890886.1957549.3597242516268327909.robh@kernel.org>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <171692890886.1957549.3597242516268327909.robh@kernel.org>

On Tue, May 28, 2024 at 03:41:48PM -0500, Rob Herring (Arm) wrote:
> 
> On Tue, 28 May 2024 22:03:11 +0300, Laurent Pinchart wrote:
> > The ADP5585 is a 10/11 input/output port expander with a built in keypad
> > matrix decoder, programmable logic, reset generator, and PWM generator.
> > These bindings model the device as an MFD, and support the GPIO expander
> > and PWM functions.
> > 
> > These bindings support the GPIO and PWM functions.
> > 
> > Drop the existing adi,adp5585 and adi,adp5585-02 compatible strings from
> > trivial-devices.yaml. They have been added there by mistake as the
> > driver that was submitted at the same time used different compatible
> > strings. We can take them over safely.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > I've limited the bindings to GPIO and PWM as I lack hardware to design,
> > implement and test the rest of the features the chip supports.
> > 
> > Changes since v1:
> > 
> > - Squash "dt-bindings: trivial-devices: Drop adi,adp5585 and
> >   adi,adp5585-02" into this patch
> > - Merge child nodes into parent node
> > ---
> >  .../devicetree/bindings/mfd/adi,adp5585.yaml  | 107 ++++++++++++++++++
> >  .../devicetree/bindings/trivial-devices.yaml  |   4 -
> >  MAINTAINERS                                   |   7 ++
> >  3 files changed, 114 insertions(+), 4 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/adi,adp5585.yaml
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:

My bad, I messed up. Will be fixed in v3.

> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/adi,adp5585.example.dtb: mfd@34: 'gpio' is a required property
> 	from schema $id: http://devicetree.org/schemas/mfd/adi,adp5585.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/adi,adp5585.example.dtb: mfd@34: 'gpio' is a required property
> 	from schema $id: http://devicetree.org/schemas/mfd/adi,adp5585.yaml#
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240528190315.3865-2-laurent.pinchart@ideasonboard.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

-- 
Regards,

Laurent Pinchart