Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S935793AbYBCGcu (ORCPT ); Sun, 3 Feb 2008 01:32:50 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752470AbYBCGck (ORCPT ); Sun, 3 Feb 2008 01:32:40 -0500 Received: from nwd2mail10.analog.com ([137.71.25.55]:57911 "EHLO nwd2mail10.analog.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751400AbYBCGci (ORCPT ); Sun, 3 Feb 2008 01:32:38 -0500 X-IronPort-AV: E=Sophos;i="4.25,297,1199682000"; d="scan'208";a="61463672" Subject: [PATCH try#2] [MTD/MAPS] Blackfin BF5xx Maps: Handle the case where flash memory and ethernet mac/phy are mapped onto the same async bank From: Bryan Wu Reply-To: bryan.wu@analog.com To: dwmw2@infradead.org, will.newton@gmail.com, linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org, Mike Frysinger Content-Type: text/plain Content-Transfer-Encoding: 7bit Organization: Analog Devices, Inc. Date: Sun, 03 Feb 2008 14:32:35 +0800 Message-Id: <1202020355.6671.23.camel@roc-laptop> Mime-Version: 1.0 X-Mailer: Evolution 2.12.1 X-OriginalArrivalTime: 03 Feb 2008 06:32:37.0218 (UTC) FILETIME=[914AB420:01C8662E] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9552 Lines: 327 >From 974192a0bf168e84370377b835a2858948789088 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sun, 3 Feb 2008 14:27:09 +0800 Subject: [PATCH] [MTD/MAPS] Blackfin BF5xx Maps: Handle the case where flash memory and ethernet mac/phy are mapped onto the same async bank [try #1] The BF533-STAMP does this for example. All board-specific configuration goes in your board resources file. [try #2] Remove useless SSYNC() as Will said Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- drivers/mtd/maps/Kconfig | 45 ++++++++ drivers/mtd/maps/Makefile | 1 + drivers/mtd/maps/bf5xx-flash.c | 227 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 273 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/maps/bf5xx-flash.c diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index a592fc0..5357f04 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -528,6 +528,51 @@ config MTD_PCMCIA_ANONYMOUS If unsure, say N. +config MTD_BF5xx + tristate "Blackfin BF533-STAMP Flash Chip Support" + depends on BFIN533_STAMP && MTD_CFI + select MTD_PARTITIONS + help + Map driver which allows for simultaneous utilization of + ethernet and CFI parallel flash. + +config BFIN_FLASH_BANK_0 + hex "EBIU_AMBCTL For Flash (Bank 0)" + depends on MTD_BF5xx + default 0x7BB0 + help + For boards that share the async memory bank with both Flash and + the Ethernet, these settings allow you to have EBIU settings just + when the Flash is active. The other EBIU settings in the main + Blackfin menu will be utilized when the Flash is not active. +config BFIN_FLASH_BANK_1 + hex "EBIU_AMBCTL For Flash (Bank 1)" + depends on MTD_BF5xx + default 0x7BB0 + help + For boards that share the async memory bank with both Flash and + the Ethernet, these settings allow you to have EBIU settings just + when the Flash is active. The other EBIU settings in the main + Blackfin menu will be utilized when the Flash is not active. +config BFIN_FLASH_BANK_2 + hex "EBIU_AMBCTL For Flash (Bank 2)" + depends on MTD_BF5xx + default 0x7BB0 + help + For boards that share the async memory bank with both Flash and + the Ethernet, these settings allow you to have EBIU settings just + when the Flash is active. The other EBIU settings in the main + Blackfin menu will be utilized when the Flash is not active. +config BFIN_FLASH_BANK_3 + hex "EBIU_AMBCTL For Flash (Bank 3)" + depends on MTD_BF5xx + default 0x7BB0 + help + For boards that share the async memory bank with both Flash and + the Ethernet, these settings allow you to have EBIU settings just + when the Flash is active. The other EBIU settings in the main + Blackfin menu will be utilized when the Flash is not active. + config MTD_UCLINUX tristate "Generic uClinux RAM/ROM filesystem support" depends on MTD_PARTITIONS && !MMU diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 316382a..62eea4f 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -69,3 +69,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o +obj-$(CONFIG_MTD_BF5xx) += bf5xx-flash.o diff --git a/drivers/mtd/maps/bf5xx-flash.c b/drivers/mtd/maps/bf5xx-flash.c new file mode 100644 index 0000000..dec02e2 --- /dev/null +++ b/drivers/mtd/maps/bf5xx-flash.c @@ -0,0 +1,227 @@ +/* + * drivers/mtd/maps/bf5xx-flash.c + * + * Handle the case where flash memory and ethernet mac/phy are + * mapped onto the same async bank. The BF533-STAMP does this + * for example. All board-specific configuration goes in your + * board resources file. + * + * Copyright 2000 Nicolas Pitre + * Copyright 2005-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); }) + +#define DRIVER_NAME "BF5xx-Flash" + +#define BFIN_FLASH_AMBCTL0VAL ((CONFIG_BFIN_FLASH_BANK_1 << 16) | CONFIG_BFIN_FLASH_BANK_0) +#define BFIN_FLASH_AMBCTL1VAL ((CONFIG_BFIN_FLASH_BANK_3 << 16) | CONFIG_BFIN_FLASH_BANK_2) + +/* Should add a per-device structure and track this there ... */ +static int enet_flash_pin; +static struct mtd_info *bf5xx_mtd; + +struct flash_save { + u32 ambctl0; + u32 ambctl1; + unsigned long flags; +}; + +static void switch_to_flash(struct flash_save *save) +{ + local_irq_save(save->flags); + + gpio_set_value(enet_flash_pin, 0); + + save->ambctl0 = bfin_read_EBIU_AMBCTL0(); + save->ambctl1 = bfin_read_EBIU_AMBCTL1(); + bfin_write_EBIU_AMBCTL0(BFIN_FLASH_AMBCTL0VAL); + bfin_write_EBIU_AMBCTL1(BFIN_FLASH_AMBCTL1VAL); + SSYNC(); +} + +static void switch_back(struct flash_save *save) +{ + bfin_write_EBIU_AMBCTL0(save->ambctl0); + bfin_write_EBIU_AMBCTL1(save->ambctl1); + SSYNC(); + + gpio_set_value(enet_flash_pin, 1); + + local_irq_restore(save->flags); +} + +static map_word bf5xx_read(struct map_info *map, unsigned long ofs) +{ + int nValue = 0x0; + map_word test; + struct flash_save save; + + switch_to_flash(&save); + + nValue = readw(map->virt + ofs); + SSYNC(); + + switch_back(&save); + + test.x[0] = (u16)nValue; + return test; +} + +static void bf5xx_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + unsigned long i; + map_word test; + + if ((unsigned long)to & 0x1) { + for (i = 0; i < len / 2 * 2; i += 2) { + test = bf5xx_read(map, from + i); + put_unaligned(test.x[0], (__le16 *)(to + i)); + } + } else { + for (i = 0; i < len / 2 * 2; i += 2) { + test = bf5xx_read(map, from + i); + *((u16*)(to + i)) = test.x[0]; + } + } + + if (len & 0x1) { + test = bf5xx_read(map, from + i); + *((u8*)(to + i)) = (u8)test.x[0]; + } +} + +static void bf5xx_write(struct map_info *map, map_word d1, unsigned long ofs) +{ + u16 d; + struct flash_save save; + + d = (u16)d1.x[0]; + + switch_to_flash(&save); + + writew(d, map->virt + ofs); + SSYNC(); + + switch_back(&save); +} + +static void bf5xx_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + struct flash_save save; + + switch_to_flash(&save); + + memcpy(map->virt + to, from, len); + SSYNC(); + + switch_back(&save); +} + +static struct map_info bf5xx_map = { + .name = DRIVER_NAME, + .read = bf5xx_read, + .copy_from = bf5xx_copy_from, + .write = bf5xx_write, + .copy_to = bf5xx_copy_to, +}; + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +#endif + +static int __init bf5xx_flash_probe(struct platform_device *dev) +{ + int ret; + struct physmap_flash_data *pdata = dev->dev.platform_data; + struct resource *memory = platform_get_resource(dev, IORESOURCE_MEM, 0); + + enet_flash_pin = platform_get_irq(dev, 0); + + bf5xx_map.bankwidth = pdata->width; + bf5xx_map.size = memory->end - memory->start + 1; + bf5xx_map.virt = (void __iomem *)memory->start; + bf5xx_map.phys = memory->start; + + if (gpio_request(enet_flash_pin, DRIVER_NAME)) { + pr_init(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", enet_flash_pin); + return -EBUSY; + } + gpio_direction_output(enet_flash_pin, 1); + + pr_init(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", bf5xx_map.bankwidth * 8); + bf5xx_mtd = do_map_probe(memory->name, &bf5xx_map); + if (!bf5xx_mtd) + return -ENXIO; + +#ifdef CONFIG_MTD_PARTITIONS + ret = parse_mtd_partitions(bf5xx_mtd, part_probe_types, &pdata->parts, 0); + if (ret > 0) { + pr_init(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n"); + add_mtd_partitions(bf5xx_mtd, pdata->parts, ret); + + } else if (pdata->nr_parts) { + pr_init(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n"); + add_mtd_partitions(bf5xx_mtd, pdata->parts, pdata->nr_parts); + + } else +#endif + { + pr_init(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n"); + add_mtd_device(bf5xx_mtd); + } + + return 0; +} + +static int __devexit bf5xx_flash_remove(struct platform_device *dev) +{ + gpio_free(enet_flash_pin); +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(bf5xx_mtd); +#endif + map_destroy(bf5xx_mtd); + return 0; +} + +static struct platform_driver bf5xx_flash_driver = { + .probe = bf5xx_flash_probe, + .remove = __devexit_p(bf5xx_flash_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init bf5xx_flash_init(void) +{ + return platform_driver_register(&bf5xx_flash_driver); +} +module_init(bf5xx_flash_init); + +static void __exit bf5xx_flash_exit(void) +{ + platform_driver_unregister(&bf5xx_flash_driver); +} +module_exit(bf5xx_flash_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank"); -- 1.5.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/