Received-SPF: pass (google.com: domain of linux-kernel+bounces-195107-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Artur Weber <aweber.kernel@gmail.com>
Date: Thu, 30 May 2024 10:55:57 +0200
Subject: [PATCH RFC 07/11] power: supply: max77693: Add USB extcon
 detection for enabling charging
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240530-max77693-charger-extcon-v1-7-dc2a9e5bdf30@gmail.com>
References: <20240530-max77693-charger-extcon-v1-0-dc2a9e5bdf30@gmail.com>
In-Reply-To: <20240530-max77693-charger-extcon-v1-0-dc2a9e5bdf30@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>, 
 Chanwoo Choi <cw00.choi@samsung.com>
Cc: Sebastian Reichel <sre@kernel.org>, Rob Herring <robh@kernel.org>, 
 Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>, 
 Krzysztof Kozlowski <krzk+dt@kernel.org>, 
 Alim Akhtar <alim.akhtar@samsung.com>, linux-pm@vger.kernel.org, 
 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, 
 linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, 
 ~postmarketos/upstreaming@lists.sr.ht, Henrik Grimler <henrik@grimler.se>, 
 Wolfgang Wiedmeyer <wolfgit@wiedmeyer.de>, 
 Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>, 
 Artur Weber <aweber.kernel@gmail.com>

Add a device tree property, "maxim,usb-connector", that can be used to
specify a USB connector to use to detect whether a charging cable has
been plugged in/out, and enable/disable charging accordingly.

To accommodate this, also add an internal pointer to the CHARGER regulator,
which is used to enable/disable charging and set the input current limit
(which will be done in subsequent commits).

The extcon listener/worker implementation is inspired by the rt5033_charger
driver.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 drivers/power/supply/Kconfig            |   1 +
 drivers/power/supply/max77693_charger.c | 125 ++++++++++++++++++++++++++++++++
 2 files changed, 126 insertions(+)

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 3e31375491d5..e4aeff9e7ad1 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -549,6 +549,7 @@ config CHARGER_MAX77650
 config CHARGER_MAX77693
 	tristate "Maxim MAX77693 battery charger driver"
 	depends on MFD_MAX77693
+	depends on EXTCON || !EXTCON
 	help
 	  Say Y to enable support for the Maxim MAX77693 battery charger.
 
diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c
index d59b1524b0a4..c2e8ae367381 100644
--- a/drivers/power/supply/max77693_charger.c
+++ b/drivers/power/supply/max77693_charger.c
@@ -5,6 +5,8 @@
 // Copyright (C) 2014 Samsung Electronics
 // Krzysztof Kozlowski <krzk@kernel.org>
 
+#include <linux/devm-helpers.h>
+#include <linux/extcon.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
@@ -30,6 +32,13 @@ struct max77693_charger {
 	u32 batttery_overcurrent;
 	u32 fast_charge_current;
 	u32 charge_input_threshold_volt;
+
+	/* USB cable notifications */
+	struct {
+		struct extcon_dev *edev;
+		struct notifier_block nb;
+		struct work_struct work;
+	} cable;
 };
 
 static int max77693_get_charger_state(struct regmap *regmap, int *val)
@@ -711,16 +720,109 @@ static int max77693_reg_init(struct max77693_charger *chg)
 			chg->charge_input_threshold_volt);
 }
 
+static int max77693_set_charging(struct max77693_charger *chg, bool enable)
+{
+	int is_enabled;
+	int ret = 0;
+
+	is_enabled = regulator_is_enabled(chg->regu);
+	if (is_enabled < 0)
+		return is_enabled;
+
+	if (enable && !is_enabled)
+		ret = regulator_enable(chg->regu);
+	else if (!enable && is_enabled)
+		ret = regulator_disable(chg->regu);
+
+	return ret;
+}
+
+static void max77693_charger_extcon_work(struct work_struct *work)
+{
+	struct max77693_charger *chg = container_of(work, struct max77693_charger,
+						  cable.work);
+	struct extcon_dev *edev = chg->cable.edev;
+	int connector, state;
+	int ret;
+
+	for (connector = EXTCON_USB_HOST; connector <= EXTCON_CHG_USB_PD;
+	     connector++) {
+		state = extcon_get_state(edev, connector);
+		if (state == 1)
+			break;
+	}
+
+	switch (connector) {
+	case EXTCON_CHG_USB_SDP:
+	case EXTCON_CHG_USB_DCP:
+	case EXTCON_CHG_USB_CDP:
+	case EXTCON_CHG_USB_ACA:
+	case EXTCON_CHG_USB_FAST:
+	case EXTCON_CHG_USB_SLOW:
+	case EXTCON_CHG_USB_PD:
+		ret = max77693_set_charging(chg, true);
+		if (ret) {
+			dev_err(chg->dev, "failed to enable charging\n");
+			break;
+		}
+		dev_info(chg->dev, "charging. connector type: %d\n",
+			 connector);
+		break;
+	default:
+		ret = max77693_set_charging(chg, false);
+		if (ret) {
+			dev_err(chg->dev, "failed to disable charging\n");
+			break;
+		}
+		dev_info(chg->dev, "charging. connector type: %d\n",
+			 connector);
+		break;
+	}
+
+	power_supply_changed(chg->charger);
+}
+
+static int max77693_charger_extcon_notifier(struct notifier_block *nb,
+					  unsigned long event, void *param)
+{
+	struct max77693_charger *chg = container_of(nb, struct max77693_charger,
+						    cable.nb);
+
+	schedule_work(&chg->cable.work);
+
+	return NOTIFY_OK;
+}
+
 #ifdef CONFIG_OF
 static int max77693_dt_init(struct device *dev, struct max77693_charger *chg)
 {
 	struct device_node *np = dev->of_node;
+	struct device_node *np_conn, *np_edev;
 
 	if (!np) {
 		dev_err(dev, "no charger OF node\n");
 		return -EINVAL;
 	}
 
+	np_conn = of_parse_phandle(np, "maxim,usb-connector", 0);
+	np_edev = of_get_parent(np_conn);
+
+	chg->cable.edev = extcon_find_edev_by_node(np_edev);
+	if (IS_ERR(chg->cable.edev)) {
+		/*
+		 * In case of deferred extcon probe, defer our probe as well
+		 * until it appears.
+		 */
+		if (PTR_ERR(chg->cable.edev) == -EPROBE_DEFER)
+			return PTR_ERR(chg->cable.edev);
+		/*
+		 * Otherwise, ignore errors (the charger can run without a
+		 * connector provided).
+		 */
+		dev_warn(dev, "no extcon device found in device-tree (%ld)\n",
+			 PTR_ERR(chg->cable.edev));
+	}
+
 	if (of_property_read_u32(np, "maxim,constant-microvolt",
 			&chg->constant_volt))
 		chg->constant_volt = DEFAULT_CONSTANT_VOLT;
@@ -787,6 +889,26 @@ static int max77693_charger_probe(struct platform_device *pdev)
 
 	psy_cfg.drv_data = chg;
 
+	/* Set up extcon if the USB connector node was found */
+	if (!IS_ERR(chg->cable.edev)) {
+		ret = devm_work_autocancel(&pdev->dev, &chg->cable.work,
+					   max77693_charger_extcon_work);
+		if (ret) {
+			dev_err(&pdev->dev, "failed: initialize extcon work\n");
+			return ret;
+		}
+
+		chg->cable.nb.notifier_call = max77693_charger_extcon_notifier;
+
+		ret = devm_extcon_register_notifier_all(&pdev->dev,
+							chg->cable.edev,
+							&chg->cable.nb);
+		if (ret) {
+			dev_err(&pdev->dev, "failed: register extcon notifier\n");
+			return ret;
+		}
+	}
+
 	ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
 	if (ret) {
 		dev_err(&pdev->dev, "failed: create fast charge timer sysfs entry\n");
@@ -822,6 +944,9 @@ static int max77693_charger_probe(struct platform_device *pdev)
 	device_remove_file(&pdev->dev, &dev_attr_top_off_threshold_current);
 	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
 
+	devm_extcon_unregister_notifier_all(&pdev->dev, chg->cable.edev,
+					    &chg->cable.nb);
+
 	return ret;
 }
 

-- 
2.45.1