Received-SPF: pass (google.com: domain of linux-kernel+bounces-195291-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
Message-ID: <c76e17c950aae6083b9a75b2080d5e87b8145d14.camel@ew.tq-group.com>
Subject: Re: [PATCH 8/8] gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH
 interrupt type
From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
To: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>, Bartosz Golaszewski
 <brgl@bgdev.pl>, Andrew Lunn <andrew@lunn.ch>, linux-gpio@vger.kernel.org, 
 linux-kernel@vger.kernel.org, Gregor Herburger
 <gregor.herburger@tq-group.com>,  linux@ew.tq-group.com
Date: Thu, 30 May 2024 13:15:46 +0200
In-Reply-To: <876eb824-2898-4ffe-9d0e-69dd0781729f@moroto.mountain>
References: <cover.1716967982.git.matthias.schiffer@ew.tq-group.com>
	 <2c265b6bcfcde7d2327b94c4f6e3ad6d4f1e2de7.1716967982.git.matthias.schiffer@ew.tq-group.com>
	 <8689fbcd-3fa3-410b-8fc9-7a699bf163b8@moroto.mountain>
	 <0e971f0b885bd360e33ef472d96e3d9e0ab56405.camel@ew.tq-group.com>
	 <876eb824-2898-4ffe-9d0e-69dd0781729f@moroto.mountain>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
User-Agent: Evolution 3.44.4-0ubuntu2 
Precedence: bulk
MIME-Version: 1.0

On Thu, 2024-05-30 at 13:22 +0300, Dan Carpenter wrote:
>=20
> On Thu, May 30, 2024 at 10:39:25AM +0200, Matthias Schiffer wrote:
> > On Wed, 2024-05-29 at 17:38 +0300, Dan Carpenter wrote:
> > >=20
> > > On Wed, May 29, 2024 at 09:45:20AM +0200, Matthias Schiffer wrote:
> > > > diff --git a/drivers/gpio/gpio-tqmx86.c b/drivers/gpio/gpio-tqmx86.=
c
> > > > index c957be3341774..400415676ad5d 100644
> > > > --- a/drivers/gpio/gpio-tqmx86.c
> > > > +++ b/drivers/gpio/gpio-tqmx86.c
> > > > @@ -126,9 +126,15 @@ static void _tqmx86_gpio_irq_config(struct tqm=
x86_gpio_data *gpio, int hwirq)
> > > >  	unsigned int offset =3D hwirq - TQMX86_NGPO;
> > > >  	u8 type =3D TQMX86_INT_TRIG_NONE, mask, val;
> > > > =20
> > > > -	if (gpio->irq_type[hwirq] & TQMX86_INT_UNMASKED)
> > > > +	if (gpio->irq_type[hwirq] & TQMX86_INT_UNMASKED) {
> > > >  		type =3D gpio->irq_type[hwirq] & TQMX86_INT_TRIG_MASK;
> > > > =20
> > > > +		if (type =3D=3D TQMX86_INT_TRIG_BOTH)
> > > > +			type =3D tqmx86_gpio_get(&gpio->chip, hwirq)
> > >                                                             ^^^^^
> > >=20
> > > > +				? TQMX86_INT_TRIG_FALLING
> > > > +				: TQMX86_INT_TRIG_RISING;
> > > > +	}
> > > > +
> > > >  	mask =3D TQMX86_GPII_MASK(offset);
> > >                                 ^^^^^^
> > > >  	val =3D TQMX86_GPII_CONFIG(offset, type);
> > >                                  ^^^^^^
> > > >  	_tqmx86_gpio_update_bits(gpio, TQMX86_GPIIC, mask, val);
> > >=20
> > > The offset stuff wasn't beautiful and I'm glad you are deleting it.  =
My
> > > understanding is that a hwirq is 0-3 for output or 4-7 input.  An off=
set
> > > is "hwirq % 4"?
> > >=20
> > > There are a bunch of places which are still marked as taking an offse=
t
> > > but they all actually take a hwirq.  For example, tqmx86_gpio_get()
> > > above.  The only things which still actually take an offset are the
> > > TQMX86_GPII_MASK() and TQMX86_GPII_CONFIG() macros.
> > >=20
> > > Could you:
> > > 1) Modify TQMX86_GPII_MASK() and TQMX86_GPII_CONFIG() to take a hwirq=
?
> > > 2) Rename all the "offset" variables to "hwirq"?
> >=20
> > Unfortunately, the TQMx86 GPIO is a huge mess, and the mapping between =
GPIO numbers and IRQ numbers
> > depends on the hardware generation/variant. I don't think it is possibl=
e to have GPIO numbers and
> > hwirq numbers differ, is it?
> >=20
> > Currently, the driver only supports COM Express modules, where IRQs 0-3=
 correspond to GPIOs 4-7,
> > while GPIOs 0-3 don't have interrupt support.
>=20
> I'm so confused.
>=20
> So "offset" is the GPIO number and "hwirq" is the IRQ number?  If the
> IRQ numbers are 0-3 then why do we subtract 4 to get the GPIO number in

The current naming in the driver is confusing and I'll fix that in the next=
 round of refactoring
patches.

Generally, hwirq =3D=3D GPIO number (I have not found a way to change this =
mapping - if there is one,
I'd be interested to try if it makes the code less confusing). "offset" cur=
rently always refers to
some shift in a hardware register. In tqmx86_gpio_get and tqmx86_gpio_set, =
offset is a GPIO number.
In all functions dealing with IRQs, offset is an IRQ number (which is diffe=
rent from the hwirq
number).

Matthias


> _tqmx86_gpio_irq_config()?
>=20
> 	unsigned int offset =3D hwirq - TQMX86_NGPO;
>=20
> And again, it's just weird to call:
>=20
> 		type =3D tqmx86_gpio_get(&gpio->chip, hwirq);
>=20
> where we're passing "hwirq" when tqmx86_gpio_get() takes an "offset" as
> an argument.
>=20
> regards,
> dan carpenter
>=20

--=20
TQ-Systems GmbH | M=C3=BChlstra=C3=9Fe 2, Gut Delling | 82229 Seefeld, Germ=
any
Amtsgericht M=C3=BCnchen, HRB 105018
Gesch=C3=A4ftsf=C3=BChrer: Detlef Schneider, R=C3=BCdiger Stahl, Stefan Sch=
neider
https://www.tq-group.com/