Received-SPF: pass (google.com: domain of linux-kernel+bounces-195486-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Message-ID: <c11328ef-b61e-489f-9016-e342c749c000@gmail.com>
Date: Thu, 30 May 2024 16:07:22 +0200
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: iio: iio-trig-hrtimer bug on suspend/resume when used with bmi160
 and bmi323
Content-Language: en-US
To: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: Jonathan Cameron <jic23@kernel.org>, Lars-Peter Clausen
 <lars@metafoo.de>, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
 Jagath Jog J <jagathjog1996@gmail.com>,
 =?UTF-8?Q?Uwe_Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>,
 "Luke D . Jones" <luke@ljones.dev>, Jonathan LoBue <jlobue10@gmail.com>
References: <31d7f7aa-e834-4fd0-a66a-e0ff528425dc@gmail.com>
 <20240113174351.47a20239@jic23-huawei>
 <053a5c27-68fd-41b1-8b40-783dfb83d488@gmail.com>
 <20240115093703.00001f64@Huawei.com>
From: Denis Benato <benato.denis96@gmail.com>
In-Reply-To: <20240115093703.00001f64@Huawei.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit

On 1/15/24 10:37, Jonathan Cameron wrote:
> On Sun, 14 Jan 2024 21:04:12 +0100
> Denis Benato <benato.denis96@gmail.com> wrote:
> 
>> On 1/13/24 18:46, Jonathan Cameron wrote:
>>> On Wed, 10 Jan 2024 23:35:01 +0100
>>> Denis Benato <benato.denis96@gmail.com> wrote:
>>>   
>>>> Hello,
>>>>
>>>> With this mail I am submitting bug report that is probably related to
>>>> iio-trig-hrtimer but there is also the possibility for it to be
>>>> specific to bmi160 and bmi323.
>>>>
>>>> The described problem have been reproduced on my handheld PC (Asus
>>>> RC71L) and in another handheld PC with two different gyroscope
>>>> drivers: bmi323 (backported by me on v6.7, on RC71L) and bmi160.
>>>>
>>>> My target hardware (RC71L that yeld to this discovery) has a bmi323
>>>> chip that does not have any interrupt pins reaching the CPU, yet I
>>>> need to fetch periodically data from said device, therefore I used
>>>> iio-trig-hrtimer: created a trigger, set the device and trigger
>>>> sampling frequencies, bound the trigger to the device and enabled
>>>> buffer: data is being read and available over /dev/iio:device0.
>>>>
>>>> While in this state if I suspend my handheld I receive (from dmesg)
>>>> the warning reported below and at resume data is not coming out of
>>>> the iio device and the hrtimer appears to not be working. If I create
>>>> a new trigger and bind the new trigger to said iio device and
>>>> re-enable buffer data does come out of /dev/iio:device0 once more,
>>>> until the next sleep.
>>>>
>>>> Since this is important to me I have taken the time to look at both
>>>> drivers and iio-trig-hrtimer and I have identified three possible
>>>> reasons:
>>>>
>>>> 1) iio-trig-hrtimer won't work after suspend regardless of how it is
>>>> used (this is what I believe is the cause)  
>>> me too.  
>> who and how should investigate this issue? Would putting a kprintf in the hrtimer callback be enough to check?
> The warning you have pretty much points at this being the problem, but sure
> you could add a print there to be absolutely sure.
> 
>>
>>
>> Just to make sure I understood correctly: is this a separate issue from the warning I receive or are those linked?
> 
> I think it's all one issue.
Hello,

Sorry for the delay, I was able to find some time just recently.

Sadly I don't think anymore this is just one issue:

I have setup a proof of concept that at suspend sets a boolean to true and at resume sets the same boolean to false, and on trigger_handler returns IRQ_NONE if the device is sleeping (everything guarded by an additional mutex) and it solved the warning: no more regmap access are being performed after the device is put to sleep, but unfortunately the acquisition does not automatically resume after waking up the device.

How shall we proceed?

> 
>>>   
>>>> 2) iio-trig-hrtimer is stopped by the -ESHTDOWN returned by the
>>>> function printing "Transfer while suspended", however that stack
>>>> trace does not include function calls related to iio-trig-hrtimer and
>>>> this seems less plausible 3) bmi160 and bmi323 appears to be similar
>>>> and maybe are sharing a common bug with suspend (this is also why I
>>>> have maintainers of those drivers in the recipient list)
>>>>
>>>> Thanks for your time, patience and understanding,  
>>>
>>> Hi Denis,
>>>
>>> I suspect this is the legacy of the platform I used to test the hrtimer
>>> and similar triggers on never had working suspend and resume (we ripped
>>> support for that board out of the kernel a while back now...)
>>> Hence those paths were never tested by me and others may not have cared
>>> about this particular case.
>>>
>>> Anyhow, so I think what is going on is fairly simple.
>>>
>>> There is no way for a driver to indicate to a trigger provided by a separate
>>> module / hardware device that it should stop triggering data capture.
>>> The driver in question doesn't block data capture when suspended, which
>>> would be easy enough to add but doesn't feel like the right solution.
>>>
>>> So my initial thought is that we should add suspend and resume callbacks to
>>> iio_trigger_ops and call them manually from iio device drivers in their
>>> suspend and resume callbacks.  These would simply pause whatever the
>>> trigger source was so that no attempts are made to trigger the use of
>>> the device when it is suspended.
>>>
>>> It gets a little messy though as triggers can be shared between
>>> multiple devices so we'd need to reference count suspend and resume
>>> for the trigger to make sure we only resume once all consumers of
>>> the trigger have said they are ready to cope with triggers again.
>>>
>>> As mentioned, the alternative would be to block the triggers at ingress
>>> to the bmi323 and bmi160 drivers.  There may be a helpful pm flag that could
>>> be used but if not, then setting an is_suspended flag under the data->mutex
>>> to avoid races. and reading it in the trigger_handler to decide whether
>>> to talk to the device should work.  
>> I was thinking of doing this too, but I don't know if adding a mutex to frequently invoked functions is going to introduce some timing problems and so I was waiting for some comments on that matter. If nothing bad is expected I can surely try it.
>>>
>>> I'd kind of like the generic solution of actually letting the trigger
>>> know, but not sure how much work it would turn out to be.  Either way there
>>> are a lot of drivers to fix this problem in as in theory most triggers can
>>> be used with most drivers that support buffered data capture.
>>> There may also be fun corners where a hardware trigger from one IIO
>>> device A is being used by another B and the suspend timing is such that B
>>> finishing with the trigger results in A taking an action (in the try_reenable
>>> callback) that could result in bus traffic.
>>> That one is going to be much more fiddly to handle than the simpler case
>>> you have run into.  
>> Since more and more handheld PCs are coming and provided many vendors such as
>> asus tends to improve what they did built on previous generations I think a
>> general solution would be desirable.
>>
>> Plus there are handheld PCs that does not yet have a driver (bmi270) or are
>> using an existing one and it would be very difficult to fix it in every of
>> them as of now, in the future I fear it will become almost impossible or 
>> extremely time consuming as market expands.
> 
> Both solutions require specific calls to be added to every driver that might
> encounter this - so most drivers that support triggers other than the ones
> they supply.
> 
>>>
>>> Thanks for the detailed bug report btw.   To get it fixed a few
>>> questions:
>>> 1) Are you happy to test proposed fixes?
>>> 2) Do you want to have a go at fixing it yourself? (I'd suggest trying
>>>    the fix in the bmi323 driver first rather than looking at the other 
>>>    solution)
>>>    If we eventually implement the more general version, then a bmi323
>>>    additional protection against this problem would not be a problem.
>>>
>>> Clearly I'd like the answers to be yes to both questions, but up to you!
>>>
>>> Jonathan
>>>
>>>   
>> Hello Jonathan and thank you kindly for you answer,
>>
>> I am very interested in the iio ecosystem as in those aforementioned
>> handheld PCs the gyroscope plays the role as a mouse so it's a pretty
>> important input device.
>>
>> I am writing to lkml not just as a single developer, but as part of a
>>  larger community in this matter: this means we will be able to test
>> any solution and in more than just one hardware.
>>
>> To answers your questions:
>> 1) yes, we all will be very happy to
>> 2) as I am very busy right now I might be unable to do that immediately,
>> but I will surely do it if one general solution cannot be found or is impractical.
>>
>> As of my limited knowledge the number of drivers now existing that are affected
>> are 2, and the number of drivers that will be affected, once the driver is
>> written, will be at least 3.
> 
> The problem appears to be general unfortunately.
> 
> I'll have to see if I can fire up something where I can actually test solutions
> and I'm afraid I also don't have a lot of time at the moment.
> Perhaps I can find time in the next few weeks to hack together a prototype
> for one of the drivers you can test.
> 
> Jonathan
> 
>>
>> Thank you very much for your answer,
>> Denis
>>
> 

Thank you for you time and patience,
Denis