Received-SPF: pass (google.com: domain of linux-kernel+bounces-197183-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
From: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>
Cc: Unnathi Chalicheemala <quic_uchalich@quicinc.com>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, kernel@quicinc.com
Subject: [PATCH v6 4/5] arm64: dts: qcom: sm8550: Add Broadcast_AND register in LLCC block
Date: Fri, 31 May 2024 09:45:27 -0700
Message-Id: <9bb6e086adec4d3b2134462d504822fb79b009e7.1717014052.git.quic_uchalich@quicinc.com>
In-Reply-To: <cover.1717014052.git.quic_uchalich@quicinc.com>
References: <cover.1717014052.git.quic_uchalich@quicinc.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
From SM8450 onwards, a new Broadcast_AND region was added
which checks for status bit 1. This hasn't been updated and Broadcast_OR
region was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8550.

Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index bc5aeb05ffc3..d0ba6cf6c27e 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -4295,12 +4295,14 @@ system-cache-controller@25000000 {
 			      <0 0x25200000 0 0x200000>,
 			      <0 0x25400000 0 0x200000>,
 			      <0 0x25600000 0 0x200000>,
-			      <0 0x25800000 0 0x200000>;
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>;
 			reg-names = "llcc0_base",
 				    "llcc1_base",
 				    "llcc2_base",
 				    "llcc3_base",
-				    "llcc_broadcast_base";
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-- 
2.34.1