Received-SPF: pass (google.com: domain of linux-kernel+bounces-198726-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Message-ID: <89c5c663-df8a-43d4-91b3-0a84b0c9a324@quicinc.com>
Date: Mon, 3 Jun 2024 15:38:44 +0800
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v9 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
CC: <andersson@kernel.org>, <konrad.dybcio@linaro.org>, <robh@kernel.org>,
        <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <kernel@quicinc.com>,
        Qiang Yu <quic_qianyu@quicinc.com>,
        Ziyue Zhang
	<quic_ziyuzhan@quicinc.com>, <quic_chenlei@quicinc.com>
References: <20240529100926.3166325-1-quic_tengfan@quicinc.com>
 <20240529100926.3166325-5-quic_tengfan@quicinc.com>
 <s5gt3p6zsd5ebrkop4dhd33tykln33f6ahu3pibymecxsmakyd@lg5wfgec6dat>
 <205de8b7-507f-45c9-83ce-6eceb1466cb2@quicinc.com>
 <CAA8EJpqFq=6YFcUpjdkKikN54iQ76i8Rk_z+mLH1Tt0zFFmciQ@mail.gmail.com>
From: Tengfei Fan <quic_tengfan@quicinc.com>
In-Reply-To: <CAA8EJpqFq=6YFcUpjdkKikN54iQ76i8Rk_z+mLH1Tt0zFFmciQ@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit


On 5/31/2024 4:38 PM, Dmitry Baryshkov wrote:
> On Fri, 31 May 2024 at 11:35, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
>>
>>
>>
>> On 5/29/2024 11:18 PM, Dmitry Baryshkov wrote:
>>> On Wed, May 29, 2024 at 06:09:26PM +0800, Tengfei Fan wrote:
>>>> Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe,
>>>> I2C functions support.
>>>> Here is a diagram of AIM300 AIoT Carrie Board and SoM
>>>>    +--------------------------------------------------+
>>>>    |             AIM300 AIOT Carrier Board            |
>>>>    |                                                  |
>>>>    |           +-----------------+                    |
>>>>    |power----->| Fixed regulator |---------+          |
>>>>    |           +-----------------+         |          |
>>>>    |                                       |          |
>>>>    |                                       v VPH_PWR  |
>>>>    | +----------------------------------------------+ |
>>>>    | |                          AIM300 SOM |        | |
>>>>    | |                                     |VPH_PWR | |
>>>>    | |                                     v        | |
>>>>    | |   +-------+       +--------+     +------+    | |
>>>>    | |   | UFS   |       | QCS8550|     |PMIC  |    | |
>>>>    | |   +-------+       +--------+     +------+    | |
>>>>    | |                                              | |
>>>>    | +----------------------------------------------+ |
>>>>    |                                                  |
>>>>    |                    +----+          +------+      |
>>>>    |                    |USB |          | UART |      |
>>>>    |                    +----+          +------+      |
>>>>    +--------------------------------------------------+
>>>>
>>>> Co-developed-by: Qiang Yu <quic_qianyu@quicinc.com>
>>>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>>>> Co-developed-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>>>> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>>> ---
>>>>    arch/arm64/boot/dts/qcom/Makefile             |   1 +
>>>>    .../boot/dts/qcom/qcs8550-aim300-aiot.dts     | 322 ++++++++++++++++++
>>>>    2 files changed, 323 insertions(+)
>>>>    create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
>>>
>>> [trimmed]
>>>
>>>> +&remoteproc_adsp {
>>>> +    firmware-name = "qcom/qcs8550/adsp.mbn",
>>>> +                    "qcom/qcs8550/adsp_dtbs.elf";
>>>
>>> Please excuse me, I think I missed those on the previous run.
>>>
>>> adsp_dtb.mbn
>>
>> Currently, waht we have released is adsp_dtbs.elf. If we modify it to
>> adsp_dtb.mbn, it may cause the ADSP functionality can not boot normally.
> 
> Released where? linux-firmware doesn't have such a file. And the modem
> partition most likely has a different path for it anyway.

Firmware releases can be obtained from 
https://qpm-git.qualcomm.com/home2/git/qualcomm/qualcomm-linux-spf-1-0_test_device_public.git 
after users sign up for free accounts on both 
https://qpm-git.qualcomm.com and https://chipmaster2.qti.qualcomm.com.

> 
>>
>>>
>>>> +    status = "okay";
>>>> +};
>>>> +
>>>> +&remoteproc_cdsp {
>>>> +    firmware-name = "qcom/qcs8550/cdsp.mbn",
>>>> +                    "qcom/qcs8550/cdsp_dtbs.elf";
>>>
>>> cdsp_dtb.mbn
>>
>> CDSP also as above ADSP.
>>
>>>
> 
>>>> +
>>>> +    te_active: te-active-state {
>>>> +            pins = "gpio86";
>>>> +            function = "mdp_vsync";
>>>> +            drive-strength = <2>;
>>>> +            bias-pull-down;
>>>> +    };
>>>> +
>>>> +    te_suspend: te-suspend-state {
>>>> +            pins = "gpio86"
>>>> +            function = "mdp_vsync";
>>>> +            drive-strength = <2>;
>>>> +            bias-pull-down;
>>>> +    };
>>>
>>> What is the difference between these two?
>>
>> TE pin needs to be pulled down for both active and suspend states. There
>> is no difference.
> 
> So why do you need two different states for it?

Dividing into two different states can provide a clearer expression of 
whether the corresponging functionality is avtive or suspend.

We can also find similar settings in the other SM8550 and SM8650 
platform dts files, such as sm8550-qrd.dts and sm8650-qrd.dts.

[1] sm8550-qrd.dts: 
https://elixir.bootlin.com/linux/v6.9.3/source/arch/arm64/boot/dts/qcom/sm8550-qrd.dts#L1052

[2] sm8650-qrd.dts: 
https://elixir.bootlin.com/linux/v6.9.3/source/arch/arm64/boot/dts/qcom/sm8650-qrd.dts#L1098

> 
> 
> 
> 
> 

-- 
Thx and BRs,
Tengfei Fan