Received-SPF: pass (google.com: domain of linux-kernel+bounces-198812-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
Date: Mon, 3 Jun 2024 10:48:17 +0200
From: Johan Hovold <johan@kernel.org>
To: Abel Vesa <abel.vesa@linaro.org>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-crd: Add pmic-glink node
 with all 3 connectors
Message-ID: <Zl2DUXWUN0088-Af@hovoldconsulting.com>
References: <20240527-x1e80100-dts-pmic-glink-v1-0-7ea5c8eb4d2b@linaro.org>
 <20240527-x1e80100-dts-pmic-glink-v1-2-7ea5c8eb4d2b@linaro.org>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240527-x1e80100-dts-pmic-glink-v1-2-7ea5c8eb4d2b@linaro.org>

On Mon, May 27, 2024 at 11:07:28AM +0300, Abel Vesa wrote:
> Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> for USB only, for now. The DP port will come at a later stage since it
> uses a retimer.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 143 ++++++++++++++++++++++++++++++
>  1 file changed, 143 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> index c5c2895b37c7..2fcc994cbb89 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -49,6 +49,101 @@ chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
>  
> +	pmic-glink {
> +		compatible = "qcom,x1e80100-pmic-glink",
> +			     "qcom,sm8550-pmic-glink",
> +			     "qcom,pmic-glink";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> +				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
> +				    <&tlmm 125 GPIO_ACTIVE_HIGH>;

With this series applied, I'm getting the following error on boot of the
CRD:

	ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: PPM init failed, stop trying

Known issue? Do you need to enable some quirk in the UCSI driver?

Johan