Received-SPF: pass (google.com: domain of linux-kernel+bounces-199092-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
Message-ID: <9bcc04a9-645a-4571-a679-ffe67300877a@ti.com>
Date: Mon, 3 Jun 2024 17:42:06 +0530
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH net-next v9 2/2] net: ti: icssg_prueth: add TAPRIO offload
 support
Content-Language: en-US
To: Vladimir Oltean <vladimir.oltean@nxp.com>
CC: Jan Kiszka <jan.kiszka@siemens.com>,
        Dan Carpenter
	<dan.carpenter@linaro.org>,
        Andrew Lunn <andrew@lunn.ch>, Simon Horman
	<horms@kernel.org>,
        Diogo Ivo <diogo.ivo@siemens.com>,
        Wolfram Sang
	<wsa+renesas@sang-engineering.com>,
        Randy Dunlap <rdunlap@infradead.org>,
        Niklas Schnelle <schnelle@linux.ibm.com>,
        Vignesh Raghavendra
	<vigneshr@ti.com>,
        Richard Cochran <richardcochran@gmail.com>,
        Roger Quadros
	<rogerq@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
        Jakub Kicinski
	<kuba@kernel.org>, Eric Dumazet <edumazet@google.com>,
        "David S. Miller"
	<davem@davemloft.net>,
        <linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <srk@ti.com>,
        Jacob
 Keller <jacob.e.keller@intel.com>,
        Roger Quadros <rogerq@ti.com>
References: <20240531044512.981587-1-danishanwar@ti.com>
 <20240531044512.981587-1-danishanwar@ti.com>
 <20240531044512.981587-3-danishanwar@ti.com>
 <20240531044512.981587-3-danishanwar@ti.com>
 <20240531135157.aaxgslyur5br6zkb@skbuf>
From: MD Danish Anwar <danishanwar@ti.com>
In-Reply-To: <20240531135157.aaxgslyur5br6zkb@skbuf>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8bit

Hi Vladimir,

On 31/05/24 7:21 pm, Vladimir Oltean wrote:
> On Fri, May 31, 2024 at 10:15:12AM +0530, MD Danish Anwar wrote:
>> From: Roger Quadros <rogerq@ti.com>
>>
>> The ICSSG dual-emac / switch firmware supports Enhanced Scheduled Traffic
>> (EST – defined in P802.1Qbv/D2.2 that later got included in IEEE
>> 802.1Q-2018) configuration. EST allows express queue traffic to be
>> scheduled (placed) on the wire at specific repeatable time intervals. In
>> Linux kernel, EST configuration is done through tc command and the taprio
>> scheduler in the net core implements a software only scheduler
>> (SCH_TAPRIO). If the NIC is capable of EST configuration,user indicate
>> "flag 2" in the command which is then parsed by taprio scheduler in net
>> core and indicate that the command is to be offloaded to h/w. taprio then
>> offloads the command to the driver by calling ndo_setup_tc() ndo ops. This
>> patch implements ndo_setup_tc() to offload EST configuration to ICSSG.
> 
> This is all a lot of verbiage about generic tc-taprio and nothing
> concrete about the ICSSG implementation... It is useless, sorry.
> 

I will try to add more information about ICSSG and remove generic
tc-taprio details.

>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
>> Reviewed-by: Simon Horman <horms@kernel.org>
>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
>> ---
>>  drivers/net/ethernet/ti/Kconfig              |   1 +
>>  drivers/net/ethernet/ti/Makefile             |   1 +
>>  drivers/net/ethernet/ti/icssg/icssg_prueth.c |   3 +
>>  drivers/net/ethernet/ti/icssg/icssg_prueth.h |   2 +
>>  drivers/net/ethernet/ti/icssg/icssg_qos.c    | 288 +++++++++++++++++++
>>  drivers/net/ethernet/ti/icssg/icssg_qos.h    | 113 ++++++++
>>  6 files changed, 408 insertions(+)
>>  create mode 100644 drivers/net/ethernet/ti/icssg/icssg_qos.c
>>  create mode 100644 drivers/net/ethernet/ti/icssg/icssg_qos.h
>>
>> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
>> index f160a3b71499..6deac9035610 100644
>> --- a/drivers/net/ethernet/ti/Kconfig
>> +++ b/drivers/net/ethernet/ti/Kconfig
>> @@ -190,6 +190,7 @@ config TI_ICSSG_PRUETH
>>  	depends on PRU_REMOTEPROC
>>  	depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
>>  	depends on PTP_1588_CLOCK_OPTIONAL
>> +	depends on NET_SCH_TAPRIO
> 
> I think the pattern should be "depends on NET_SCH_TAPRIO || NET_SCH_TAPRIO=n".
> What you want is to be built as a module when taprio is a module,
> because you use symbols exported by it (taprio_offload_get(), taprio_offload_free()).
> 

Sure.

>>  	help
>>  	  Support dual Gigabit Ethernet ports over the ICSSG PRU Subsystem.
>>  	  This subsystem is available starting with the AM65 platform.
>> diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
>> index 59cd20a38267..0a86311bd170 100644
>> --- a/drivers/net/ethernet/ti/Makefile
>> +++ b/drivers/net/ethernet/ti/Makefile
>> @@ -35,6 +35,7 @@ obj-$(CONFIG_TI_ICSSG_PRUETH) += icssg-prueth.o
>>  icssg-prueth-y := icssg/icssg_prueth.o \
>>  		  icssg/icssg_common.o \
>>  		  icssg/icssg_classifier.o \
>> +		  icssg/icssg_qos.o \
>>  		  icssg/icssg_queues.o \
>>  		  icssg/icssg_config.o \
>>  		  icssg/icssg_mii_cfg.o \
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> index d159bdf7dd9d..8982ecb8a43d 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> @@ -706,6 +706,7 @@ static const struct net_device_ops emac_netdev_ops = {
>>  	.ndo_eth_ioctl = emac_ndo_ioctl,
>>  	.ndo_get_stats64 = emac_ndo_get_stats64,
>>  	.ndo_get_phys_port_name = emac_ndo_get_phys_port_name,
>> +	.ndo_setup_tc = icssg_qos_ndo_setup_tc,
>>  };
>>  
>>  static int prueth_netdev_init(struct prueth *prueth,
>> @@ -840,6 +841,8 @@ static int prueth_netdev_init(struct prueth *prueth,
>>  	emac->rx_hrtimer.function = &emac_rx_timer_callback;
>>  	prueth->emac[mac] = emac;
>>  
>> +	icssg_qos_tas_init(ndev);
>> +
>>  	return 0;
>>  
>>  free:
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> index fab2428de78b..c6851546e6c5 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> @@ -37,6 +37,7 @@
>>  #include "icssg_config.h"
>>  #include "icss_iep.h"
>>  #include "icssg_switch_map.h"
>> +#include "icssg_qos.h"
>>  
>>  #define PRUETH_MAX_MTU          (2000 - ETH_HLEN - ETH_FCS_LEN)
>>  #define PRUETH_MIN_PKT_SIZE     (VLAN_ETH_ZLEN)
>> @@ -195,6 +196,7 @@ struct prueth_emac {
>>  	/* RX IRQ Coalescing Related */
>>  	struct hrtimer rx_hrtimer;
>>  	unsigned long rx_pace_timeout_ns;
>> +	struct prueth_qos qos;
>>  };
>>  
>>  /**
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_qos.c b/drivers/net/ethernet/ti/icssg/icssg_qos.c
>> new file mode 100644
>> index 000000000000..5e93b1b9ca43
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_qos.c
>> @@ -0,0 +1,288 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* Texas Instruments ICSSG PRUETH QoS submodule
>> + * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#include <linux/printk.h>
>> +#include "icssg_prueth.h"
>> +#include "icssg_switch_map.h"
>> +
>> +static void tas_update_fw_list_pointers(struct prueth_emac *emac)
>> +{
>> +	struct tas_config *tas = &emac->qos.tas.config;
>> +
>> +	if ((readb(tas->active_list)) == TAS_LIST0) {
> 
> Who and when updates tas->active_list from TAS_LIST0 to TAS_LIST1?
>

->emac_taprio_replace()
	-> tas_update_oper_list()
		-> tas_set_trigger_list_change()

This API send a r30 command to firmware to trigger the list change
`emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_TRIGGER);`

This once firmware recives this command, it swaps the active and shadow
list.

emac_taprio_replace() calls tas_update_oper_list()

In tas_update_oper_list() in the beginning active_list is 0 i.e.
TAS_LIST0, tas_update_fw_list_pointers() is called which configures the
active and shadow list pointers. TAS_LIST0 becomes the active_list and
TAS_LIST1 becomes the shadow list.

Let's say before this API was called, active_list is TAS_LIST0 (0) and
shadow_list is TAS_LIST1.

After getting the shadow_list we fill three different arrays,
1. gate_mask_list[]
2. win_end_time_list[]
3. gate_close_time_list[][] - 2D array with size = num_entries * num_queues

Driver only updates the shadow_list. Once shadow list is filled, we call
tas_set_trigger_list_change() and ask firmware to change the active
list. Now the shadow_list that we had filled (TAS_LIST1) will become
active list and vice versa. We will again update our pointers

This is how list is changed by calling tas_update_fw_list_pointers.

>> +		tas->fw_active_list = emac->dram.va + TAS_GATE_MASK_LIST0;
>> +		tas->fw_shadow_list = emac->dram.va + TAS_GATE_MASK_LIST1;
>> +	} else {
>> +		tas->fw_active_list = emac->dram.va + TAS_GATE_MASK_LIST1;
>> +		tas->fw_shadow_list = emac->dram.va + TAS_GATE_MASK_LIST0;
>> +	}
>> +}
>> +
>> +static void tas_update_maxsdu_table(struct prueth_emac *emac)
>> +{
>> +	struct tas_config *tas = &emac->qos.tas.config;
>> +	u16 __iomem *max_sdu_tbl_ptr;
>> +	u8 gate_idx;
>> +
>> +	/* update the maxsdu table */
>> +	max_sdu_tbl_ptr = emac->dram.va + TAS_QUEUE_MAX_SDU_LIST;
>> +
>> +	for (gate_idx = 0; gate_idx < TAS_MAX_NUM_QUEUES; gate_idx++)
>> +		writew(tas->max_sdu_table.max_sdu[gate_idx], &max_sdu_tbl_ptr[gate_idx]);
>> +}
>> +
>> +static void tas_reset(struct prueth_emac *emac)
>> +{
>> +	struct tas_config *tas = &emac->qos.tas.config;
>> +	int i;
>> +
>> +	for (i = 0; i < TAS_MAX_NUM_QUEUES; i++)
>> +		tas->max_sdu_table.max_sdu[i] = 2048;
> 
> Macro + short comment for the magic number, please.
> 

Sure I will add it. Each elements in this array is a 2 byte value
showing the maximum length of frame to be allowed through each gate.

>> +
>> +	tas_update_maxsdu_table(emac);
>> +
>> +	writeb(TAS_LIST0, tas->active_list);
>> +
>> +	memset_io(tas->fw_active_list, 0, sizeof(*tas->fw_active_list));
>> +	memset_io(tas->fw_shadow_list, 0, sizeof(*tas->fw_shadow_list));
>> +}
>> +
>> +static int tas_set_state(struct prueth_emac *emac, enum tas_state state)
>> +{
>> +	struct tas_config *tas = &emac->qos.tas.config;
>> +	int ret;
>> +
>> +	if (tas->state == state)
>> +		return 0;
>> +
>> +	switch (state) {
>> +	case TAS_STATE_RESET:
>> +		tas_reset(emac);
>> +		ret = emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_RESET);
>> +		tas->state = TAS_STATE_RESET;
>> +		break;
>> +	case TAS_STATE_ENABLE:
>> +		ret = emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_ENABLE);
>> +		tas->state = TAS_STATE_ENABLE;
>> +		break;
>> +	case TAS_STATE_DISABLE:
>> +		ret = emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_DISABLE);
>> +		tas->state = TAS_STATE_DISABLE;
> 
> This can be expressed as just "tas->state = state" outside the switch statement.
> But probably shouldn't be, if "ret != 0".

Yes we shouldn't do that as we are sending the r30 command to firmware
in each case.

> 
>> +		break;
>> +	default:
>> +		netdev_err(emac->ndev, "%s: unsupported state\n", __func__);
> 
> There are two levels of logging for this error, and this particular one
> isn't useful. We can infer it went through the "default" case when the
> printk below returned -EINVAL, because if that -EINVAL came from
> emac_set_port_state(), that would have printed, in turn, "invalid port command".
> 

But, the enum tas_state and enum icssg_port_state_cmd are not 1-1 mapped.

emac_set_port_state() will only return -EINVAL when `cmd >=
ICSSG_EMAC_PORT_MAX_COMMANDS` which is 19. But a tas_state value of 3 is
also invalid as we only support value of 0,1 and 2 so I think this print
shoudl be okay

enum tas_state {
	TAS_STATE_DISABLE = 0,
	TAS_STATE_ENABLE = 1,
	TAS_STATE_RESET = 2,
};


> I don't think that a "default" case is needed here, as long as all enum
> values are handled, and the input is sanitized everywhere (which it is).
> 

I think the default case should remain. Without default case the
function will return 0 even for invalid sates. By default ret = 0, in
the tas_state passed to API is not valid, none of the case will be
called, ret will remaing zero. No error will be printed and the function
will return 0. Keeping default case makes sure that the wrong state was
requested.

>> +		ret = -EINVAL;
>> +		break;
>> +	}
>> +
>> +	if (ret)
>> +		netdev_err(emac->ndev, "TAS set state failed %d\n", ret);
> 
> FWIW, emac_set_port_state() has its own logging. I don't necessarily see
> the need for this print.
> 

This print we can remove. I don't see any need to keep this print as
emac_set_port_state() will anyways print a ndetdev_err() if the cmd fails.

>> +	return ret;
>> +}
>> +
>> +static int tas_set_trigger_list_change(struct prueth_emac *emac)
>> +{
>> +	struct tc_taprio_qopt_offload *admin_list = emac->qos.tas.taprio_admin;
>> +	struct tas_config *tas = &emac->qos.tas.config;
>> +	struct ptp_system_timestamp sts;
>> +	u32 change_cycle_count;
>> +	u32 cycle_time;
>> +	u64 base_time;
>> +	u64 cur_time;
>> +
>> +	/* IEP clock has a hardware errata due to which it wraps around exactly
>> +	 * once every taprio cycle. To compensate for that, adjust cycle time
>> +	 * by the wrap around time which is stored in emac->iep->def_inc
>> +	 */
>> +	cycle_time = admin_list->cycle_time - emac->iep->def_inc;
>> +	base_time = admin_list->base_time;
>> +	cur_time = prueth_iep_gettime(emac, &sts);
>> +
>> +	if (base_time > cur_time)
>> +		change_cycle_count = DIV_ROUND_UP_ULL(base_time - cur_time, cycle_time);
>> +	else
>> +		change_cycle_count = 1;
>> +
>> +	writel(cycle_time, emac->dram.va + TAS_ADMIN_CYCLE_TIME);
>> +	writel(change_cycle_count, emac->dram.va + TAS_CONFIG_CHANGE_CYCLE_COUNT);
>> +	writeb(admin_list->num_entries, emac->dram.va + TAS_ADMIN_LIST_LENGTH);
>> +
>> +	/* config_change cleared by f/w to ack reception of new shadow list */
>> +	writeb(1, &tas->config_list->config_change);
>> +	/* config_pending cleared by f/w when new shadow list is copied to active list */
>> +	writeb(1, &tas->config_list->config_pending);
>> +
>> +	return emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_TRIGGER);
> 
> The call path here is:
> 
> emac_taprio_replace()
> -> tas_update_oper_list()
>    -> tas_set_trigger_list_change()
>       -> emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_TRIGGER);
> -> tas_set_state(emac, TAS_STATE_ENABLE);
>    -> emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_ENABLE);
> 
> I'm surprised by the calls to emac_set_port_state() in such a quick
> succession? Is there any firmware requirement for how much should the
> port stay in the TAS_TRIGGER state? Or is it not really a state, despite
> it being an argument to a function named emac_set_port_state()?
> 

ICSSG_EMAC_PORT_TAS_TRIGGER is not a state. emac_set_port_state() sends
a command to firmware, we call it r30 command. Driver then waits for the
response for some time. If a successfull response is recived the
function return 0 otherwise error.

Here first `emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_TRIGGER)` is
called which will ask firmware to swap the active_list and shadow_list
as explained above.

After that ICSSG_EMAC_PORT_TAS_ENABLE cmd is sent. Upon recievinig this
command firmware will Enable TAS for the particular port. (port is part
of emac structure).

I can see how that can be confusing given the API name is
emac_set_port_state(). Some of the cmds infact triggers a state change
eg. ICSSG_EMAC_PORT_DISABLE, ICSSG_EMAC_PORT_BLOCK,
ICSSG_EMAC_PORT_FORWARD but some of the commands just triggers some
action on the firmware side. Based on the command firmware does some
actions.


>> +}
> 
> There's something extremely elementary about this function which I still
> don't understand.
> 
> When does the schedule actually _start_? Can that be controlled by the
> driver with the high (nanosecond) precision necessary in order for the
> ICSSG to synchronize with the schedule of other equipment in the LAN?
> 
> You never pass the base time per se to the firmware. Just a number of
> cycles from now. I guess that number of cycles decides when the schedule
> starts, but what are those cycles relative to?
>

Once the shadow list is updated, the trigger is set in the firmware and
for that API tas_set_trigger_list_change() is called.

The following three offsets are configured in this function,
1. TAS_ADMIN_CYCLE_TIME → admin cycle time
2. TAS_CONFIG_CHANGE_CYCLE_COUNT → number of cycles after which the
admin list is taken as operating list.
This parameter is calculated based on the base_time, cur_time and
cycle_time. If the base_time is in past (already passed) the
TAS_CONFIG_CHANGE_CYCLE_COUNT is set to 1. If the base_time is in
future, TAS_CONFIG_CHANGE_CYCLE_COUNT is calculated using
DIV_ROUND_UP_ULL(base_time - cur_time, cycle_time)
3. TAS_ADMIN_LIST_LENGTH → Number of window entries in the admin list.

After configuring the above three parameters, the driver gives the
trigger signal to the firmware using the R30 command interface with
ICSSG_EMAC_PORT_TAS_TRIGGER command.

The schedule starts based on TAS_CONFIG_CHANGE_CYCLE_COUNT. Those cycles
are relative to time remaining in the base_time from now i.e. base_time
- cur_time.

>> +
>> +static int tas_update_oper_list(struct prueth_emac *emac)
>> +{
>> +	struct tc_taprio_qopt_offload *admin_list = emac->qos.tas.taprio_admin;
>> +	struct tas_config *tas = &emac->qos.tas.config;
>> +	u32 tas_acc_gate_close_time = 0;
>> +	u8 idx, gate_idx, val;
>> +	int ret;
>> +
>> +	if (admin_list->cycle_time > TAS_MAX_CYCLE_TIME)
>> +		return -EINVAL;
>> +
>> +	tas_update_fw_list_pointers(emac);
>> +
>> +	for (idx = 0; idx < admin_list->num_entries; idx++) {
>> +		writeb(admin_list->entries[idx].gate_mask,
>> +		       &tas->fw_shadow_list->gate_mask_list[idx]);
>> +		tas_acc_gate_close_time += admin_list->entries[idx].interval;
>> +
>> +		/* extend last entry till end of cycle time */
>> +		if (idx == admin_list->num_entries - 1)
>> +			writel(admin_list->cycle_time,
>> +			       &tas->fw_shadow_list->win_end_time_list[idx]);
>> +		else
>> +			writel(tas_acc_gate_close_time,
>> +			       &tas->fw_shadow_list->win_end_time_list[idx]);
>> +	}
>> +
>> +	/* clear remaining entries */
>> +	for (idx = admin_list->num_entries; idx < TAS_MAX_CMD_LISTS; idx++) {
>> +		writeb(0, &tas->fw_shadow_list->gate_mask_list[idx]);
>> +		writel(0, &tas->fw_shadow_list->win_end_time_list[idx]);
>> +	}
>> +
>> +	/* update the Array of gate close time for each queue in each window */
>> +	for (idx = 0 ; idx < admin_list->num_entries; idx++) {
>> +		/* On Linux, only PRUETH_MAX_TX_QUEUES are supported per port */
>> +		for (gate_idx = 0; gate_idx < PRUETH_MAX_TX_QUEUES; gate_idx++) {
>> +			u8 gate_mask_list_idx = readb(&tas->fw_shadow_list->gate_mask_list[idx]);
>> +			u32 gate_close_time = 0;
>> +
>> +			if (gate_mask_list_idx & BIT(gate_idx))
>> +				gate_close_time = readl(&tas->fw_shadow_list->win_end_time_list[idx]);
>> +
>> +			writel(gate_close_time,
>> +			       &tas->fw_shadow_list->gate_close_time_list[idx][gate_idx]);
>> +		}
> 
> An implementation which operates per TX queues rather than per traffic
> classes should report caps->gate_mask_per_txq = true in TC_QUERY_CAPS.
> 

Sure I will add this implementation.

>> +	}
>> +
>> +	/* tell f/w to swap active & shadow list */
>> +	ret = tas_set_trigger_list_change(emac);
>> +	if (ret) {
>> +		netdev_err(emac->ndev, "failed to swap f/w config list: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/* Wait for completion */
>> +	ret = readb_poll_timeout(&tas->config_list->config_change, val, !val,
>> +				 USEC_PER_MSEC, 10 * USEC_PER_MSEC);
>> +	if (ret) {
>> +		netdev_err(emac->ndev, "TAS list change completion time out\n");
>> +		return ret;
>> +	}
>> +
>> +	tas_update_fw_list_pointers(emac);
> 
> Calling this twice in the same function? Explanation?
> 

As explained earlier tas_update_fw_list_pointers() is called in the
beginning to set the active and shadow_list. After that we fill the
shadow list and then send commmand to swap the active and shadow list.
As the list are swapped we will call tas_update_fw_list_pointers() to
update the list pointers.

>> +
>> +	return 0;
>> +}
>> +
>> +static int emac_taprio_replace(struct net_device *ndev,
>> +			       struct tc_taprio_qopt_offload *taprio)
>> +{
>> +	struct prueth_emac *emac = netdev_priv(ndev);
>> +	int ret;
>> +
>> +	if (taprio->cycle_time_extension) {
>> +		NL_SET_ERR_MSG_MOD(taprio->extack, "Cycle time extension not supported");
>> +		return -EOPNOTSUPP;
>> +	}
>> +
>> +	if (taprio->cycle_time < TAS_MIN_CYCLE_TIME) {
>> +		NL_SET_ERR_MSG_FMT_MOD(taprio->extack, "cycle_time %llu is less than min supported cycle_time %d",
>> +				       taprio->cycle_time, TAS_MIN_CYCLE_TIME);
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (taprio->num_entries > TAS_MAX_CMD_LISTS) {
>> +		NL_SET_ERR_MSG_FMT_MOD(taprio->extack, "num_entries %lu is more than max supported entries %d",
>> +				       taprio->num_entries, TAS_MAX_CMD_LISTS);
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (emac->qos.tas.taprio_admin)
>> +		taprio_offload_free(emac->qos.tas.taprio_admin);
>> +
>> +	emac->qos.tas.taprio_admin = taprio_offload_get(taprio);
>> +	ret = tas_update_oper_list(emac);
> 
> If this fails and there was a previous emac->qos.tas.taprio_admin
> schedule present, you just broke it. In particular, the
> "if (admin_list->cycle_time > TAS_MAX_CYCLE_TIME)" bounds check really
> doesn't belong there; it should have been done much earlier, to avoid a
> complete offload breakage for such a silly thing (replacing a working
> taprio schedule with a new one that has too large cycle breaks the old
> schedule).
> 

Will adding the check "if (admin_list->cycle_time > TAS_MAX_CYCLE_TIME)"
in emac_taprio_replace() along with the all the checks be OK?


>> +	if (ret)
>> +		goto clear_taprio;
>> +
>> +	ret = tas_set_state(emac, TAS_STATE_ENABLE);
>> +	if (ret)
>> +		goto clear_taprio;
>> +
>> +clear_taprio:
>> +	emac->qos.tas.taprio_admin = NULL;
>> +	taprio_offload_free(taprio);
>> +
>> +	return ret;
>> +}
>> +
>> +static int emac_taprio_destroy(struct net_device *ndev,
>> +			       struct tc_taprio_qopt_offload *taprio)
>> +{
>> +	struct prueth_emac *emac = netdev_priv(ndev);
>> +	int ret;
>> +
>> +	taprio_offload_free(taprio);
>> +
>> +	ret = tas_set_state(emac, TAS_STATE_RESET);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return tas_set_state(emac, TAS_STATE_DISABLE);
> 
> Again, any timing requirements for the state transitions? Why not
> directly do TAS_STATE_DISABLE? It's not very clear what they do
> different, despite of the attempt to document these firmware states.
> 

Doing a TAS_STATE_RESET resets all the configurations done previously.
Disable only disables the state but the configuration remains. When we
destroy the taprio I think we should clear out everything thus reset is
needed.

However I think the sequence is not correct here. It should be
TAS_STATE_DISABLE first and then TAS_STATE_RESET.

>> +}
>> +
>> +static int emac_setup_taprio(struct net_device *ndev, void *type_data)
>> +{
>> +	struct tc_taprio_qopt_offload *taprio = type_data;
>> +	int ret;
>> +
>> +	switch (taprio->cmd) {
>> +	case TAPRIO_CMD_REPLACE:
>> +		ret = emac_taprio_replace(ndev, taprio);
>> +		break;
>> +	case TAPRIO_CMD_DESTROY:
>> +		ret = emac_taprio_destroy(ndev, taprio);
>> +		break;
>> +	default:
>> +		ret = -EOPNOTSUPP;
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +int icssg_qos_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
>> +			   void *type_data)
>> +{
>> +	switch (type) {
>> +	case TC_SETUP_QDISC_TAPRIO:
>> +		return emac_setup_taprio(ndev, type_data);
>> +	default:
>> +		return -EOPNOTSUPP;
>> +	}
>> +}
>> +
>> +void icssg_qos_tas_init(struct net_device *ndev)
>> +{
>> +	struct prueth_emac *emac = netdev_priv(ndev);
>> +	struct tas_config *tas;
>> +
>> +	tas = &emac->qos.tas.config;
>> +
>> +	tas->config_list = emac->dram.va + TAS_CONFIG_CHANGE_TIME;
>> +	tas->active_list = emac->dram.va + TAS_ACTIVE_LIST_INDEX;
>> +
>> +	tas_update_fw_list_pointers(emac);
>> +
>> +	tas_set_state(emac, TAS_STATE_RESET);
> 
> Why leave it in TAS_STATE_RESET and not TAS_STATE_DISABLE? The firmware
> state at probe time is not idempotent with its state after a
> emac_taprio_replace() -> emac_taprio_destroy() sequence, which is not
> good.
> 

During init the we want the TAS to be completely cleaned. So if there is
any residual configurations left we want that to be cleared thus
TAS_STATE_RESET is called.

When tas_set_state(emac, TAS_STATE_RESET) or tas_set_state(emac,
TAS_STATE_DISABLE) is called a r30 cmd is sent to firmware to reset /
disable the tas.

As explained above the emac_taprio_destroy() sequence should be
TAS_STATE_DISABLE and then TAS_STATE_RESET.

Here in probe also we are setting the state to TAS_STATE_RESET. Now the
firmware state at probe time will be idempotent with its state after a
emac_taprio_replace() -> emac_taprio_destroy() sequence.

>> +}
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_qos.h b/drivers/net/ethernet/ti/icssg/icssg_qos.h
>> new file mode 100644
>> index 000000000000..25baccdd1ce5
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_qos.h
>> @@ -0,0 +1,113 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/* Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#ifndef __NET_TI_ICSSG_QOS_H
>> +#define __NET_TI_ICSSG_QOS_H
>> +
>> +#include <linux/atomic.h>
>> +#include <linux/netdevice.h>
>> +#include <net/pkt_sched.h>
>> +
>> +/* Maximum number of gate command entries in each list. */
>> +#define TAS_MAX_CMD_LISTS   (16)
>> +
>> +/* Maximum number of transmit queues supported by implementation */
>> +#define TAS_MAX_NUM_QUEUES  (8)
>> +
>> +/* Minimum cycle time supported by implementation (in ns) */
>> +#define TAS_MIN_CYCLE_TIME  (1000000)
>> +
>> +/* Minimum cycle time supported by implementation (in ns) */
>> +#define TAS_MAX_CYCLE_TIME  (4000000000)
>> +
>> +/* Minimum TAS window duration supported by implementation (in ns) */
>> +#define TAS_MIN_WINDOW_DURATION  (10000)
>> +
>> +/**
>> + * enum tas_list_num - TAS list number
>> + * @TAS_LIST0: TAS list number is 0
>> + * @TAS_LIST1: TAS list number is 1
>> + */
>> +enum tas_list_num {
>> +	TAS_LIST0 = 0,
>> +	TAS_LIST1 = 1
>> +};
>> +
>> +/**
>> + * enum tas_state - State of TAS in firmware
>> + * @TAS_STATE_DISABLE: TAS state machine is disabled.
>> + * @TAS_STATE_ENABLE: TAS state machine is enabled.
>> + * @TAS_STATE_RESET: TAS state machine is reset.
>> + */
>> +enum tas_state {
>> +	TAS_STATE_DISABLE = 0,
>> +	TAS_STATE_ENABLE = 1,
>> +	TAS_STATE_RESET = 2,
>> +};
>> +
>> +/**
>> + * struct tas_config_list - Config state machine variables
>> + * @config_change_time: New list is copied at this time
>> + * @config_change_error_counter: Incremented if admin->BaseTime < current time
>> + *				 and TAS_enabled is true
>> + * @config_pending: True if list update is pending
>> + * @config_change: Set to true when application trigger updating of admin list
>> + *		   to active list, cleared when configChangeTime is updated
>> + */
>> +struct tas_config_list {
>> +	u64 config_change_time;
>> +	u32 config_change_error_counter;
>> +	u8 config_pending;
>> +	u8 config_change;
>> +};
> 
> Should be __packed since it maps over a firmware-defined __iomem memory
> region. The compiler is not free to pad as it wishes.
> 

Sure.

>> +
>> +/* Max SDU table. See IEEE Std 802.1Q-2018 12.29.1.1 */
>> +struct tas_max_sdu_table {
>> +	u16 max_sdu[TAS_MAX_NUM_QUEUES];
>> +};
>> +
>> +/**
>> + * struct tas_firmware_list - TAS List Structure based on firmware memory map
>> + * @gate_mask_list: Window gate mask list
>> + * @win_end_time_list: Window end time list
>> + * @gate_close_time_list: Array of gate close time for each queue in each window
>> + */
>> +struct tas_firmware_list {
>> +	u8 gate_mask_list[TAS_MAX_CMD_LISTS];
>> +	u32 win_end_time_list[TAS_MAX_CMD_LISTS];
>> +	u32 gate_close_time_list[TAS_MAX_CMD_LISTS][TAS_MAX_NUM_QUEUES];
>> +};
> 
> Should be __packed.
> 

Sure.

>> +
>> +/**
>> + * struct tas_config - Main Time Aware Shaper Handle
>> + * @state: TAS state
>> + * @max_sdu_table: Max SDU table
>> + * @config_list: Config change variables
>> + * @active_list: Current operating list operating list
>> + * @fw_active_list: Active List pointer, used by firmware
>> + * @fw_shadow_list: Shadow List pointer, used by driver
>> + */
>> +struct tas_config {
>> +	enum tas_state state;
>> +	struct tas_max_sdu_table max_sdu_table;
>> +	struct tas_config_list __iomem *config_list;
>> +	u8 __iomem *active_list;
>> +	struct tas_firmware_list __iomem *fw_active_list;
>> +	struct tas_firmware_list __iomem *fw_shadow_list;
>> +};
>> +
>> +struct prueth_qos_tas {
>> +	struct tc_taprio_qopt_offload *taprio_admin;
>> +	struct tc_taprio_qopt_offload *taprio_oper;
> 
> "taprio_oper" is unused.
> 

I'll remove this.

>> +	struct tas_config config;
>> +};
>> +
>> +struct prueth_qos {
>> +	struct prueth_qos_tas tas;
>> +};
>> +
>> +void icssg_qos_tas_init(struct net_device *ndev);
>> +int icssg_qos_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
>> +			   void *type_data);
>> +#endif /* __NET_TI_ICSSG_QOS_H */
>> -- 
>> 2.34.1
>>

Thanks for your feedback. I will do the changes mentioned in this mail.
Apart from these if any other change is needed please let me know.

Also please let me know if you have any more queries.

-- 
Thanks and Regards,
Danish