Received-SPF: pass (google.com: domain of linux-kernel+bounces-200721-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Received-SPF: Pass (protection.outlook.com: domain of 2n.com designates
 195.60.68.100 as permitted sender) receiver=protection.outlook.com;
 client-ip=195.60.68.100; helo=mail.axis.com; pr=C
From: =?UTF-8?q?Kamil=20Hor=C3=A1k=20-=202N?= <kamilh@axis.com>
To: <florian.fainelli@broadcom.com>, <bcm-kernel-feedback-list@broadcom.com>,
	<andrew@lunn.ch>, <hkallweit1@gmail.com>
CC: <kamilh@axis.com>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 2/3] net: phy: bcm54811: Add LRE registers definitions
Date: Tue, 4 Jun 2024 15:36:53 +0200
Message-ID: <20240604133654.2626813-3-kamilh@axis.com>
In-Reply-To: <20240604133654.2626813-1-kamilh@axis.com>
References: <20240604133654.2626813-1-kamilh@axis.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8bit
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 04 Jun 2024 13:37:18.5022
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: d766e872-b653-462c-c472-08dc849b7448
X-MS-Exchange-CrossTenant-Id: 78703d3c-b907-432f-b066-88f7af9ca3af
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=78703d3c-b907-432f-b066-88f7af9ca3af;Ip=[195.60.68.100];Helo=[mail.axis.com]
X-MS-Exchange-CrossTenant-AuthSource:
	AMS0EPF0000019C.eurprd05.prod.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DB3PR0202MB9227

Add the definitions of LRE registers for Broadcom BCM5481x PHY

Signed-off-by: Kamil Horák - 2N <kamilh@axis.com>
---
 include/linux/brcmphy.h | 80 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 1394ba302367..1b02e1014583 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -270,6 +270,86 @@
 #define BCM5482_SSD_SGMII_SLAVE		0x15	/* SGMII Slave Register */
 #define BCM5482_SSD_SGMII_SLAVE_EN	0x0002	/* Slave mode enable */
 #define BCM5482_SSD_SGMII_SLAVE_AD	0x0001	/* Slave auto-detection */
+#define BCM5482_SSD_SGMII_SLAVE_AD	0x0001	/* Slave auto-detection */
+
+/* BroadR-Reach LRE Registers. */
+#define MII_BCM54XX_LRECR		0x00	/* LRE Control Register                    */
+#define MII_BCM54XX_LRESR		0x01	/* LRE Status Register                     */
+#define MII_BCM54XX_LREPHYSID1		0x02	/* LRE PHYS ID 1                           */
+#define MII_BCM54XX_LREPHYSID2		0x03	/* LRE PHYS ID 2                           */
+#define MII_BCM54XX_LREANAA		0x04	/* LDS Auto-Negotiation Advertised Ability */
+#define MII_BCM54XX_LREANAC		0x05	/* LDS Auto-Negotiation Advertised Control */
+#define MII_BCM54XX_LREANPT		0x06	/* LDS Ability Next Page Transmit          */
+#define MII_BCM54XX_LRELPA		0x07	/* LDS Link Partner Ability                */
+#define MII_BCM54XX_LRELPNPM		0x08	/* LDS Link Partner Next Page Message      */
+#define MII_BCM54XX_LRELPNPC		0x09	/* LDS Link Partner Next Page Control      */
+#define MII_BCM54XX_LRELDSE		0x0a	/* LDS Expansion Register                  */
+#define MII_BCM54XX_LREES		0x0f	/* LRE Extended Status                     */
+
+/* LRE control register. */
+#define LRECR_RESET			0x8000	/* Reset to default state      */
+#define LRECR_LOOPBACK			0x4000	/* Internal Loopback           */
+#define LRECR_LDSRES			0x2000	/* Restart LDS Process         */
+#define LRECR_LDSEN			0x1000	/* LDS Enable                  */
+#define LRECR_PDOWN			0x0800	/* Enable low power state      */
+#define LRECR_ISOLATE			0x0400	/* Isolate data paths from MII */
+#define LRECR_SPEED100			0x0200	/* Select 100 Mbps             */
+#define LRECR_SPEED10			0x0000	/* Select 10 Mbps              */
+#define LRECR_4PAIRS			0x0020	/* Select 4 Pairs              */
+#define LRECR_2PAIRS			0x0010	/* Select 2 Pairs              */
+#define LRECR_1PAIR			0x0000	/* Select 1 Pair               */
+#define LRECR_MASTER			0x0008	/* Force Master when LDS disabled */
+#define LRECR_SLAVE			0x0000	/* Force Slave when LDS disabled  */
+
+/* LRE status register. */
+#define LRESR_100_1PAIR			0x2000	/* Can do 100Mbps 1 Pair       */
+#define LRESR_100_4PAIR			0x1000	/* Can do 100Mbps 4 Pairs      */
+#define LRESR_100_2PAIR			0x0800	/* Can do 100Mbps 2 Pairs      */
+#define LRESR_10_2PAIR			0x0400	/* Can do 10Mbps 2 Pairs       */
+#define LRESR_10_1PAIR			0x0200	/* Can do 10Mbps 1 Pair        */
+#define LRESR_ESTATEN			0x0100	/* Extended Status in R15      */
+#define LRESR_RESV			0x0080	/* Unused...                   */
+#define LRESR_MFPS			0x0040	/* Can suppress Management Frames Preamble */
+#define LRESR_LDSCOMPLETE		0x0020	/* LDS Auto-negotiation complete */
+#define LRESR_8023			0x0010	/* Has IEEE 802.3 Support      */
+#define LRESR_LDSABILITY		0x0008	/* LDS auto-negotiation capable */
+#define LRESR_LSTATUS			0x0004	/* Link status                 */
+#define LRESR_JCD			0x0002	/* Jabber detected             */
+#define LRESR_ERCAP			0x0001	/* Ext-reg capability          */
+
+/* LDS Auto-Negotiation Advertised Ability. */
+#define LREANAA_PAUSE_ASYM		0x8000	/* Can pause asymmetrically    */
+#define LREANAA_PAUSE			0x4000	/* Can pause                   */
+#define LREANAA_100_1PAIR		0x0020	/* Can do 100Mbps 1 Pair       */
+#define LREANAA_100_4PAIR		0x0010	/* Can do 100Mbps 4 Pair       */
+#define LREANAA_100_2PAIR		0x0008	/* Can do 100Mbps 2 Pair       */
+#define LREANAA_10_2PAIR		0x0004	/* Can do 10Mbps 2 Pair        */
+#define LREANAA_10_1PAIR		0x0002	/* Can do 10Mbps 1 Pair        */
+
+#define LRE_ADVERTISE_FULL		(LREANAA_100_1PAIR | LREANAA_100_4PAIR | \
+					 LREANAA_100_2PAIR | LREANAA_10_2PAIR | \
+					 LREANAA_10_1PAIR)
+
+#define LRE_ADVERTISE_ALL		LRE_ADVERTISE_FULL
+
+/* LDS Link Partner Ability. */
+#define LRELPA_PAUSE_ASYM		0x8000	/* Supports asymmetric pause   */
+#define LRELPA_PAUSE			0x4000	/* Supports pause capability   */
+#define LRELPA_100_1PAIR		0x0020	/* 100Mbps 1 Pair capable      */
+#define LRELPA_100_4PAIR		0x0010	/* 100Mbps 4 Pair capable      */
+#define LRELPA_100_2PAIR		0x0008	/* 100Mbps 2 Pair capable      */
+#define LRELPA_10_2PAIR			0x0004	/* 10Mbps 2 Pair capable       */
+#define LRELPA_10_1PAIR			0x0002	/* 10Mbps 1 Pair capable       */
+
+/* LDS Expansion register. */
+#define LDSE_DOWNGRADE			0x8000	/* Can do LDS Speed Downgrade  */
+#define LDSE_MASTER			0x4000	/* Master / Slave              */
+#define LDSE_PAIRS_MASK			0x3000	/* Pair Count Mask             */
+#define LDSE_PAIRS_SHIFT		12
+#define LDSE_4PAIRS			(2 << LDSE_PAIRS_SHIFT)	/* 4 Pairs Connection */
+#define LDSE_2PAIRS			(1 << LDSE_PAIRS_SHIFT)	/* 2 Pairs Connection */
+#define LDSE_1PAIR			(0 << LDSE_PAIRS_SHIFT)	/* 1 Pair  Connection */
+#define LDSE_CABLEN_MASK		0x0FFF	/* Cable Length Mask           */
 
 /* BCM54810 Registers */
 #define BCM54810_EXP_BROADREACH_LRE_MISC_CTL	(MII_BCM54XX_EXP_SEL_ER + 0x90)
-- 
2.39.2