Received-SPF: pass (google.com: domain of linux-kernel+bounces-202182-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
To: <netdev@vger.kernel.org>
CC: <davem@davemloft.net>, <kuba@kernel.org>, <linux-kernel@vger.kernel.org>,
	<bryan.whitehead@microchip.com>, <andrew@lunn.ch>, <linux@armlinux.org.uk>,
	<sbauer@blackbox.su>, <hmehrtens@maxlinear.com>, <lxu@maxlinear.com>,
	<hkallweit1@gmail.com>, <edumazet@google.com>, <pabeni@redhat.com>,
	<UNGLinuxDriver@microchip.com>
Subject: [PATCH net V3 1/3] net: lan743x: disable WOL upon resume to restore full data path operation
Date: Wed, 5 Jun 2024 15:46:09 +0530
Message-ID: <20240605101611.18791-2-Raju.Lakkaraju@microchip.com>
In-Reply-To: <20240605101611.18791-1-Raju.Lakkaraju@microchip.com>
References: <20240605101611.18791-1-Raju.Lakkaraju@microchip.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering
a system event can wake the system from sleep, which may block the data path.
To restore normal data path functionality after waking, disable all wake-up
events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing
1's to them.

Fixes: 4d94282afd95 ("lan743x: Add power management support")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
---
Change List:
------------
V2 -> V3:
  - No change
V1 -> V2:
  - Repost - No change
V0 -> V1:
  - Variable "data" change from "int" to "unsigned int"

 drivers/net/ethernet/microchip/lan743x_main.c | 30 ++++++++++++++++---
 drivers/net/ethernet/microchip/lan743x_main.h | 24 +++++++++++++++
 2 files changed, 50 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 6be8a43c908a..6a40b961fafb 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -3575,7 +3575,7 @@ static void lan743x_pm_set_wol(struct lan743x_adapter *adapter)
 
 	/* clear wake settings */
 	pmtctl = lan743x_csr_read(adapter, PMT_CTL);
-	pmtctl |= PMT_CTL_WUPS_MASK_;
+	pmtctl |= PMT_CTL_WUPS_MASK_ | PMT_CTL_RES_CLR_WKP_MASK_;
 	pmtctl &= ~(PMT_CTL_GPIO_WAKEUP_EN_ | PMT_CTL_EEE_WAKEUP_EN_ |
 		PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_ |
 		PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_ | PMT_CTL_ETH_PHY_WAKE_EN_);
@@ -3710,6 +3710,7 @@ static int lan743x_pm_resume(struct device *dev)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct lan743x_adapter *adapter = netdev_priv(netdev);
+	u32 data;
 	int ret;
 
 	pci_set_power_state(pdev, PCI_D0);
@@ -3728,6 +3729,30 @@ static int lan743x_pm_resume(struct device *dev)
 		return ret;
 	}
 
+	ret = lan743x_csr_read(adapter, MAC_WK_SRC);
+	netif_info(adapter, drv, adapter->netdev,
+		   "Wakeup source : 0x%08X\n", ret);
+
+	/* Clear the wol configuration and status bits. Note that
+	 * the status bits are "Write One to Clear (W1C)"
+	 */
+	data = MAC_WUCSR_EEE_TX_WAKE_ | MAC_WUCSR_EEE_RX_WAKE_ |
+	       MAC_WUCSR_RFE_WAKE_FR_ | MAC_WUCSR_PFDA_FR_ | MAC_WUCSR_WUFR_ |
+	       MAC_WUCSR_MPR_ | MAC_WUCSR_BCAST_FR_;
+	lan743x_csr_write(adapter, MAC_WUCSR, data);
+
+	data = MAC_WUCSR2_NS_RCD_ | MAC_WUCSR2_ARP_RCD_ |
+	       MAC_WUCSR2_IPV6_TCPSYN_RCD_ | MAC_WUCSR2_IPV4_TCPSYN_RCD_;
+	lan743x_csr_write(adapter, MAC_WUCSR2, data);
+
+	data = MAC_WK_SRC_ETH_PHY_WK_ | MAC_WK_SRC_IPV6_TCPSYN_RCD_WK_ |
+	       MAC_WK_SRC_IPV4_TCPSYN_RCD_WK_ | MAC_WK_SRC_EEE_TX_WK_ |
+	       MAC_WK_SRC_EEE_RX_WK_ | MAC_WK_SRC_RFE_FR_WK_ |
+	       MAC_WK_SRC_PFDA_FR_WK_ | MAC_WK_SRC_MP_FR_WK_ |
+	       MAC_WK_SRC_BCAST_FR_WK_ | MAC_WK_SRC_WU_FR_WK_ |
+	       MAC_WK_SRC_WK_FR_SAVED_;
+	lan743x_csr_write(adapter, MAC_WK_SRC, data);
+
 	/* open netdev when netdev is at running state while resume.
 	 * For instance, it is true when system wakesup after pm-suspend
 	 * However, it is false when system wakes up after suspend GUI menu
@@ -3736,9 +3761,6 @@ static int lan743x_pm_resume(struct device *dev)
 		lan743x_netdev_open(netdev);
 
 	netif_device_attach(netdev);
-	ret = lan743x_csr_read(adapter, MAC_WK_SRC);
-	netif_info(adapter, drv, adapter->netdev,
-		   "Wakeup source : 0x%08X\n", ret);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index 645bc048e52e..fac0f33d10b2 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -61,6 +61,7 @@
 #define PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_		BIT(18)
 #define PMT_CTL_GPIO_WAKEUP_EN_			BIT(15)
 #define PMT_CTL_EEE_WAKEUP_EN_			BIT(13)
+#define PMT_CTL_RES_CLR_WKP_MASK_		GENMASK(9, 8)
 #define PMT_CTL_READY_				BIT(7)
 #define PMT_CTL_ETH_PHY_RST_			BIT(4)
 #define PMT_CTL_WOL_EN_				BIT(3)
@@ -227,12 +228,31 @@
 #define MAC_WUCSR				(0x140)
 #define MAC_MP_SO_EN_				BIT(21)
 #define MAC_WUCSR_RFE_WAKE_EN_			BIT(14)
+#define MAC_WUCSR_EEE_TX_WAKE_			BIT(13)
+#define MAC_WUCSR_EEE_RX_WAKE_			BIT(11)
+#define MAC_WUCSR_RFE_WAKE_FR_			BIT(9)
+#define MAC_WUCSR_PFDA_FR_			BIT(7)
+#define MAC_WUCSR_WUFR_				BIT(6)
+#define MAC_WUCSR_MPR_				BIT(5)
+#define MAC_WUCSR_BCAST_FR_			BIT(4)
 #define MAC_WUCSR_PFDA_EN_			BIT(3)
 #define MAC_WUCSR_WAKE_EN_			BIT(2)
 #define MAC_WUCSR_MPEN_				BIT(1)
 #define MAC_WUCSR_BCST_EN_			BIT(0)
 
 #define MAC_WK_SRC				(0x144)
+#define MAC_WK_SRC_ETH_PHY_WK_			BIT(17)
+#define MAC_WK_SRC_IPV6_TCPSYN_RCD_WK_		BIT(16)
+#define MAC_WK_SRC_IPV4_TCPSYN_RCD_WK_		BIT(15)
+#define MAC_WK_SRC_EEE_TX_WK_			BIT(14)
+#define MAC_WK_SRC_EEE_RX_WK_			BIT(13)
+#define MAC_WK_SRC_RFE_FR_WK_			BIT(12)
+#define MAC_WK_SRC_PFDA_FR_WK_			BIT(11)
+#define MAC_WK_SRC_MP_FR_WK_			BIT(10)
+#define MAC_WK_SRC_BCAST_FR_WK_			BIT(9)
+#define MAC_WK_SRC_WU_FR_WK_			BIT(8)
+#define MAC_WK_SRC_WK_FR_SAVED_			BIT(7)
+
 #define MAC_MP_SO_HI				(0x148)
 #define MAC_MP_SO_LO				(0x14C)
 
@@ -295,6 +315,10 @@
 #define RFE_INDX(index)			(0x580 + (index << 2))
 
 #define MAC_WUCSR2			(0x600)
+#define MAC_WUCSR2_NS_RCD_		BIT(7)
+#define MAC_WUCSR2_ARP_RCD_		BIT(6)
+#define MAC_WUCSR2_IPV6_TCPSYN_RCD_	BIT(5)
+#define MAC_WUCSR2_IPV4_TCPSYN_RCD_	BIT(4)
 
 #define SGMII_ACC			(0x720)
 #define SGMII_ACC_SGMII_BZY_		BIT(31)
-- 
2.34.1