Received-SPF: pass (google.com: domain of linux-kernel+bounces-205647-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Justin Lai <justinlai0215@realtek.com>
To: <kuba@kernel.org>
CC: <davem@davemloft.net>, <edumazet@google.com>, <pabeni@redhat.com>,
        <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
        <andrew@lunn.ch>, <jiri@resnulli.us>, <horms@kernel.org>,
        <rkannoth@marvell.com>, <pkshih@realtek.com>, <larry.chiu@realtek.com>,
        Justin Lai
	<justinlai0215@realtek.com>
Subject: [PATCH net-next v20 12/13] realtek: Update the Makefile and Kconfig in the realtek folder
Date: Fri, 7 Jun 2024 16:43:20 +0800
Message-ID: <20240607084321.7254-13-justinlai0215@realtek.com>
In-Reply-To: <20240607084321.7254-1-justinlai0215@realtek.com>
References: <20240607084321.7254-1-justinlai0215@realtek.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

1. Add the RTASE entry in the Kconfig.
2. Add the CONFIG_RTASE entry in the Makefile.

Signed-off-by: Justin Lai <justinlai0215@realtek.com>
---
 drivers/net/ethernet/realtek/Kconfig  | 19 +++++++++++++++++++
 drivers/net/ethernet/realtek/Makefile |  1 +
 2 files changed, 20 insertions(+)

diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 03015b665f4e..8a8ea51c639e 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -120,4 +120,23 @@ config R8169_LEDS
 	  Optional support for controlling the NIC LED's with the netdev
 	  LED trigger.
 
+config RTASE
+	tristate "Realtek Automotive Switch 9054/9068/9072/9075/9068/9071 PCIe Interface support"
+	depends on PCI
+	select CRC32
+	select PAGE_POOL
+	help
+	  Say Y here and it will be compiled and linked with the kernel
+	  if you have a Realtek Ethernet adapter belonging to the
+	  following families:
+	  RTL9054 5GBit Ethernet
+	  RTL9068 5GBit Ethernet
+	  RTL9072 5GBit Ethernet
+	  RTL9075 5GBit Ethernet
+	  RTL9068 5GBit Ethernet
+	  RTL9071 5GBit Ethernet
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rtase. This is recommended.
+
 endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
index 635491d8826e..046adf503ff4 100644
--- a/drivers/net/ethernet/realtek/Makefile
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ATP) += atp.o
 r8169-y += r8169_main.o r8169_firmware.o r8169_phy_config.o
 r8169-$(CONFIG_R8169_LEDS) += r8169_leds.o
 obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_RTASE) += rtase/
-- 
2.34.1