Received-SPF: pass (google.com: domain of linux-kernel+bounces-207333-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Date: Sun, 9 Jun 2024 12:03:23 +0100
From: Jonathan Cameron <jic23@kernel.org>
To: Vasileios Amoiridis <vassilisamir@gmail.com>
Cc: dpfrey@gmail.com, himanshujha199640@gmail.com, lars@metafoo.de,
 linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
 mike.looijmans@topic.nl
Subject: Re: [PATCH v2 04/19] iio: chemical: bme680: Fix sensor data read
 operation
Message-ID: <20240609120323.5af232f9@jic23-huawei>
In-Reply-To: <20240606212313.207550-5-vassilisamir@gmail.com>
References: <20240606212313.207550-1-vassilisamir@gmail.com>
	<20240606212313.207550-5-vassilisamir@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

On Thu,  6 Jun 2024 23:22:56 +0200
Vasileios Amoiridis <vassilisamir@gmail.com> wrote:

> A read operation is happening as follows:
> 
> a) Set sensor to forced mode
> b) Sensor measures values and update data registers and sleeps again
> c) Read data registers
> 
> In the current implementation the read operation happens immediately
> after the sensor is set to forced mode so the sensor does not have
> the time to update properly the registers. This leads to the following
> 2 problems:
> 
> 1) The first ever value which is read by the register is always wrong
> 2) Every read operation, puts the register into forced mode and reads
> the data that were calculated in the previous conversion.
> 
> This behaviour was tested in 2 ways:
> 
> 1) The internal meas_status_0 register was read before and after every
> read operation in order to verify that the data were ready even before
> the register was set to forced mode and also to check that after the
> forced mode was set the new data were not yet ready.
> 
> 2) Physically changing the temperature and measuring the temperature
> 
> This commit adds the waiting time in between the set of the forced mode
> and the read of the data. The function is taken from the Bosch BME68x
> Sensor API [1].
> 
> [1]: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L490
> Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor")
> Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Applied and marked for stable.