Received-SPF: pass (google.com: domain of linux-kernel+bounces-208667-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Precedence: bulk
MIME-Version: 1.0
References: <20240608023654.3513385-1-yosryahmed@google.com> <CAGsJ_4yVmDKtcKKAdjPOkOMWB+=ZT5TrrWz188xJaTV4EpM1Bw@mail.gmail.com>
In-Reply-To: <CAGsJ_4yVmDKtcKKAdjPOkOMWB+=ZT5TrrWz188xJaTV4EpM1Bw@mail.gmail.com>
From: Yosry Ahmed <yosryahmed@google.com>
Date: Mon, 10 Jun 2024 10:42:05 -0700
Message-ID: <CAJD7tkaHLVcjUgiUFfBK+ztCqxBTRfyVbSVH9vytK=5JYOw+Sw@mail.gmail.com>
Subject: Re: [PATCH v2] mm: zswap: handle incorrect attempts to load of large folios
To: Barry Song <21cnbao@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>, Johannes Weiner <hannes@cmpxchg.org>, 
	Nhat Pham <nphamcs@gmail.com>, Chengming Zhou <chengming.zhou@linux.dev>, 
	Baolin Wang <baolin.wang@linux.alibaba.com>, Chris Li <chrisl@kernel.org>, 
	Ryan Roberts <ryan.roberts@arm.com>, David Hildenbrand <david@redhat.com>, 
	Matthew Wilcox <willy@infradead.org>, linux-mm@kvack.org, linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

On Fri, Jun 7, 2024 at 9:13=E2=80=AFPM Barry Song <21cnbao@gmail.com> wrote=
:
>
> On Sat, Jun 8, 2024 at 10:37=E2=80=AFAM Yosry Ahmed <yosryahmed@google.co=
m> wrote:
> >
> > Zswap does not support storing or loading large folios. Until proper
> > support is added, attempts to load large folios from zswap are a bug.
> >
> > For example, if a swapin fault observes that contiguous PTEs are
> > pointing to contiguous swap entries and tries to swap them in as a larg=
e
> > folio, swap_read_folio() will pass in a large folio to zswap_load(), bu=
t
> > zswap_load() will only effectively load the first page in the folio. If
> > the first page is not in zswap, the folio will be read from disk, even
> > though other pages may be in zswap.
> >
> > In both cases, this will lead to silent data corruption. Proper support
> > needs to be added before large folio swapins and zswap can work
> > together.
> >
> > Looking at callers of swap_read_folio(), it seems like they are either
> > allocated from __read_swap_cache_async() or do_swap_page() in the
> > SWP_SYNCHRONOUS_IO path. Both of which allocate order-0 folios, so
> > everything is fine for now.
> >
> > However, there is ongoing work to add to support large folio swapins
> > [1]. To make sure new development does not break zswap (or get broken b=
y
> > zswap), add minimal handling of incorrect loads of large folios to
> > zswap.
> >
> > First, move the call folio_mark_uptodate() inside zswap_load().
> >
> > If a large folio load is attempted, and any page in that folio is in
> > zswap, return 'true' without calling folio_mark_uptodate(). This will
> > prevent the folio from being read from disk, and will emit an IO error
> > because the folio is not uptodate (e.g. do_swap_fault() will return
> > VM_FAULT_SIGBUS). It may not be reliable recovery in all cases, but it
> > is better than nothing.
> >
> > This was tested by hacking the allocation in __read_swap_cache_async()
> > to use order 2 and __GFP_COMP.
> >
> > In the future, to handle this correctly, the swapin code should:
> > (a) Fallback to order-0 swapins if zswap was ever used on the machine,
> > because compressed pages remain in zswap after it is disabled.
> > (b) Add proper support to swapin large folios from zswap (fully or
> > partially).
> >
> > Probably start with (a) then followup with (b).
> >
> > [1]https://lore.kernel.org/linux-mm/20240304081348.197341-6-21cnbao@gma=
il.com/
> >
> > Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
> > ---
> >
> > v1: https://lore.kernel.org/lkml/20240606184818.1566920-1-yosryahmed@go=
ogle.com/
> >
> > v1 -> v2:
> > - Instead of using VM_BUG_ON() use WARN_ON_ONCE() and add some recovery
> >   handling (David Hildenbrand).
> >
> > ---
> >  mm/page_io.c |  1 -
> >  mm/zswap.c   | 22 +++++++++++++++++++++-
> >  2 files changed, 21 insertions(+), 2 deletions(-)
> >
> > diff --git a/mm/page_io.c b/mm/page_io.c
> > index f1a9cfab6e748..8f441dd8e109f 100644
> > --- a/mm/page_io.c
> > +++ b/mm/page_io.c
> > @@ -517,7 +517,6 @@ void swap_read_folio(struct folio *folio, struct sw=
ap_iocb **plug)
> >         delayacct_swapin_start();
> >
> >         if (zswap_load(folio)) {
> > -               folio_mark_uptodate(folio);
> >                 folio_unlock(folio);
> >         } else if (data_race(sis->flags & SWP_FS_OPS)) {
> >                 swap_read_folio_fs(folio, plug);
> > diff --git a/mm/zswap.c b/mm/zswap.c
> > index b9b35ef86d9be..ebb878d3e7865 100644
> > --- a/mm/zswap.c
> > +++ b/mm/zswap.c
> > @@ -1557,6 +1557,26 @@ bool zswap_load(struct folio *folio)
> >
> >         VM_WARN_ON_ONCE(!folio_test_locked(folio));
> >
> > +       /*
> > +        * Large folios should not be swapped in while zswap is being u=
sed, as
> > +        * they are not properly handled. Zswap does not properly load =
large
> > +        * folios, and a large folio may only be partially in zswap.
> > +        *
> > +        * If any of the subpages are in zswap, reading from disk would=
 result
> > +        * in data corruption, so return true without marking the folio=
 uptodate
> > +        * so that an IO error is emitted (e.g. do_swap_page() will sig=
fault).
> > +        *
> > +        * Otherwise, return false and read the folio from disk.
> > +        */
> > +       if (folio_test_large(folio)) {
> > +               if (xa_find(tree, &offset,
> > +                           offset + folio_nr_pages(folio) - 1, XA_PRES=
ENT)) {
> > +                       WARN_ON_ONCE(1);
> > +                       return true;
> > +               }
> > +               return false;
>
> IMHO, this appears to be over-designed. Personally, I would opt to
> use
>
>  if (folio_test_large(folio))
>                return true;

I am sure you mean "return false" here. Always returning true means we
will never read a large folio from either zswap or disk, whether it's
in zswap or not. Basically guaranteeing corrupting data for large
folio swapin, even if zswap is disabled :)

>
> Before we address large folio support in zswap, it=E2=80=99s essential
> not to let them coexist. Expecting valid data by lunchtime is
> not advisable.

The goal here is to enable development for large folio swapin without
breaking zswap or being blocked on adding support in zswap. If we
always return false for large folios, as you suggest, then even if the
folio is in zswap (or parts of it), we will go read it from disk. This
will result in silent data corruption.

As you mentioned before, you spent a week debugging problems with your
large folio swapin series because of a zswap problem, and even after
then, the zswap_is_enabled() check you had is not enough to prevent
problems as I mentioned before (if zswap was enabled before). So we
need stronger checks to make sure we don't break things when we
support large folio swapin.

Since we can't just check if zswap is enabled or not, we need to
rather check if the folio (or any part of it) is in zswap or not. We
can only WARN in that case, but delivering the error to userspace is a
couple of extra lines of code (not set uptodate), and will make the
problem much easier to notice.

I am not sure I understand what you mean. The alternative is to
introduce a config option (perhaps internal) for large folio swapin,
and make this depend on !CONFIG_ZSWAP, or make zswap refuse to get
enabled if large folio swapin is enabled (through config or boot
option). This is until proper handling is added, of course.

>
> > +       }
> > +
> >         /*
> >          * When reading into the swapcache, invalidate our entry. The
> >          * swapcache can be the authoritative owner of the page and
> > @@ -1590,7 +1610,7 @@ bool zswap_load(struct folio *folio)
> >                 zswap_entry_free(entry);
> >                 folio_mark_dirty(folio);
> >         }
> > -
> > +       folio_mark_uptodate(folio);
> >         return true;
> >  }
> >
> > --
> > 2.45.2.505.gda0bf45e8d-goog
> >
>
> Thanks
> Barry