Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 7 Jan 2002 02:11:58 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 7 Jan 2002 02:11:49 -0500 Received: from mta02bw.bigpond.com ([139.134.6.34]:29936 "EHLO mta02bw.bigpond.com") by vger.kernel.org with ESMTP id ; Mon, 7 Jan 2002 02:11:43 -0500 Message-Id: <5.1.0.14.0.20020107180918.00b6d5a8@mail.bigpond.com> X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 07 Jan 2002 18:11:31 +1100 To: Greg KH , linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net From: Dylan Egan Subject: Re: 2.4.17 - hanging due to usb Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Ok read this... more info..... : usb.c: unable to get major 180 for usb devices usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.268 $ time 13:10:52 Jan 7 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: kmalloc IF c4b76e80, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI Root Hub SerialNumber: d000 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface c4b76e80 usb.c: kusbd: /sbin/hotplug add 1 usb.c: kusbd policy returned 0xfffffffe usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 10 usb-uhci.c: Detected 2 ports hub.c: port 1 connection change hub.c: port 1, portstatus 100, change 3, 12 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 100, change 3, 12 Mb/s hub.c: port 1 enable change, status 100 hub.c: port 2 enable change, status 100 usb.c: new USB bus registered, assigned bus number 2 usb.c: kmalloc IF c4b76c80, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI Root Hub SerialNumber: cc00 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface c4b76c80 usb.c: kusbd: /sbin/hotplug add 1 usb.c: kusbd policy returned 0xfffffffe usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 10 usb-uhci.c: Detected 2 ports hub.c: port 1 connection change hub.c: port 1, portstatus 100, change 3, 12 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 101, change 3, 12 Mb/s hub.c: port 2, portstatus 103, change 0, 12 Mb/s hub.c: USB new device connect on bus2/2, assigned device number 2 usb.c: new USB bus registered, assigned bus number 3 usb.c: kmalloc IF c4b76ac0, numif 1 usb.c: new device strings: Mfr=0, Product=1, SerialNumber=0 usb.c: kmalloc IF c4b76980, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI Root Hub SerialNumber: c800 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: USB device number 2 default language ID 0x409 Product: USB Host To Host Bridge usb.c: unhandled interfaces on device usb.c: USB device 2 (vend/prod 0x5e3/0x502) is not claimed by any active driver. Length = 18 DescriptorType = 01 USB version = 1.00 Vendor:Product = 05e3:0502 MaxPacketSize0 = 8 NumConfigurations = 1 Device version = 1.80 Device Class:SubClass:Protocol = 00:00:00 Per-interface classes Configuration: bLength = 9 bDescriptorType = 02 wTotalLength = 0027 bNumInterfaces = 01 bConfigurationValue = 01 iConfiguration = 00 bmAttributes = 80 MaxPower = 8mA Interface: 0 Alternate Setting: 0 bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 00 bNumEndpoints = 03 bInterface Class:SubClass:Protocol = ff:00:00 iInterface = 01 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 81 (in) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 02 (out) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 83 (in) bmAttributes = 03 (Interrupt) wMaxPacketSize = 0008 bInterval = 10 usb.c: kusbd: /sbin/hotplug add 2 usb.c: kusbd policy returned 0xfffffffe hub.c: port 1 enable change, status 100 usb.c: hub driver claimed interface c4b76980 usb.c: kusbd: /sbin/hotplug add 1 usb.c: kusbd policy returned 0xfffffffe usb-uhci.c: v1.268:USB Universal Host Controller Interface driver hub.c: port 1 connection change hub.c: port 1, portstatus 100, change 3, 12 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 101, change 3, 12 Mb/s hub.c: port 2, portstatus 103, change 0, 12 Mb/s hub.c: USB new device connect on bus3/2, assigned device number 2 usb.c: kmalloc IF c4b76880, numif 1 usb.c: new device strings: Mfr=1, Product=1, SerialNumber=0 usb.c: USB device number 2 default language ID 0x409 Manufacturer: ScanLogic USBIDE Product: ScanLogic USBIDE usb.c: unhandled interfaces on device usb.c: USB device 2 (vend/prod 0x4ce/0x2) is not claimed by any active driver. Length = 18 DescriptorType = 01 USB version = 1.10 Vendor:Product = 04ce:0002 MaxPacketSize0 = 8 NumConfigurations = 1 Device version = 2.60 Device Class:SubClass:Protocol = 00:00:00 Per-interface classes Configuration: bLength = 9 bDescriptorType = 02 wTotalLength = 0020 bNumInterfaces = 01 bConfigurationValue = 01 iConfiguration = 00 bmAttributes = 40 MaxPower = 0mA Interface: 0 Alternate Setting: 0 bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 00 bNumEndpoints = 02 bInterface Class:SubClass:Protocol = 08:06:50 iInterface = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 02 (out) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 81 (in) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 usb.c: kusbd: /sbin/hotplug add 2 usb.c: kusbd policy returned 0xfffffffe hub.c: port 1 enable change, status 100 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage usb-storage: act_altsettting is 0 usb-storage: id_index calculated to be: 52 usb-storage: Array length appears to be: 54 usb-storage: USB Mass Storage device detected usb-storage: Endpoints: In: 0xcff64154 Out: 0xcff64140 Int: 0x00000000 (Period 0) usb-storage: New GUID 04ce00020000000000000000 usb-storage: GetMaxLUN command result is 1, data is 0 usb-storage: Transport: Bulk usb-storage: Protocol: Transparent SCSI usb-storage: *** thread sleeping. scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 ff 00 00 00 75 04 1a c0 usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6 usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_transfer_partial(): xfer 255 bytes usb-storage: usb_stor_bulk_msg() returned 0 xferred 255/255 usb-storage: usb_stor_transfer_partial(): transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x53425355 T 0x600350 R 159 Stat 0x0 usb-storage: Bulk logical error usb-storage: Bulk reset requested and more.... : T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=c800 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04ce ProdID=0002 Rev= 2.60 S: Manufacturer=ScanLogic USBIDE S: Product=ScanLogic USBIDE C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=cc00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=05e3 ProdID=0502 Rev= 1.80 S: Product=USB Host To Host Bridge C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 8mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 16ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/