Received-SPF: pass (google.com: domain of linux-kernel+bounces-210016-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
From: Martin Schiller <ms@dev.tdt.de>
To: martin.blumenstingl@googlemail.com,
	hauke@hauke-m.de,
	andrew@lunn.ch,
	f.fainelli@gmail.com,
	olteanv@gmail.com,
	davem@davemloft.net,
	edumazet@google.com,
	kuba@kernel.org,
	pabeni@redhat.com,
	robh@kernel.org,
	krzk+dt@kernel.org,
	conor+dt@kernel.org
Cc: netdev@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	ms@dev.tdt.de
Subject: [PATCH net-next v5 07/12] net: dsa: lantiq_gswip: Use dsa_is_cpu_port() in gswip_port_change_mtu()
Date: Tue, 11 Jun 2024 15:54:29 +0200
Message-ID: <20240611135434.3180973-8-ms@dev.tdt.de>
In-Reply-To: <20240611135434.3180973-1-ms@dev.tdt.de>
References: <20240611135434.3180973-1-ms@dev.tdt.de>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Make the check for the CPU port in gswip_port_change_mtu() consistent
with other areas of the driver by using dsa_is_cpu_port().

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 drivers/net/dsa/lantiq_gswip.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswi=
p.c
index 8ec329d0c136..58c069f964dd 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1464,12 +1464,11 @@ static int gswip_port_max_mtu(struct dsa_switch *=
ds, int port)
 static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int ne=
w_mtu)
 {
 	struct gswip_priv *priv =3D ds->priv;
-	int cpu_port =3D priv->hw_info->cpu_port;
=20
 	/* CPU port always has maximum mtu of user ports, so use it to set
 	 * switch frame size, including 8 byte special header.
 	 */
-	if (port =3D=3D cpu_port) {
+	if (dsa_is_cpu_port(ds, port)) {
 		new_mtu +=3D 8;
 		gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
 			       GSWIP_MAC_FLEN);
--=20
2.39.2