Received-SPF: pass (google.com: domain of linux-kernel+bounces-212255-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: =?utf-8?q?Andr=C3=A9_Apitzsch_via_B4_Relay?= <devnull+git.apitzsch.eu@kernel.org>
Date: Wed, 12 Jun 2024 23:01:34 +0200
Subject: [PATCH v3 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear
 flash
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Message-Id: <20240612-sy7802-v3-3-1e9cc1c79b79@apitzsch.eu>
References: <20240612-sy7802-v3-0-1e9cc1c79b79@apitzsch.eu>
In-Reply-To: <20240612-sy7802-v3-0-1e9cc1c79b79@apitzsch.eu>
To: Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>, 
 Rob Herring <robh@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Conor Dooley <conor+dt@kernel.org>, 
 "Gustavo A. R. Silva" <gustavoars@kernel.org>, 
 Bjorn Andersson <andersson@kernel.org>, 
 Konrad Dybcio <konrad.dybcio@linaro.org>, 
 Christophe JAILLET <christophe.jaillet@wanadoo.fr>, 
 Trilok Soni <quic_tsoni@quicinc.com>, Kees Cook <kees@kernel.org>
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org, 
 linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org, 
 linux-arm-msm@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, 
 phone-devel@vger.kernel.org, 
 =?utf-8?q?Andr=C3=A9_Apitzsch?= <git@apitzsch.eu>
Reply-To: git@apitzsch.eu

From: André Apitzsch <git@apitzsch.eu>

The phone has a Silergy SY7802 flash LED controller.

Signed-off-by: André Apitzsch <git@apitzsch.eu>
---
 .../boot/dts/qcom/msm8939-longcheer-l9100.dts      | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index e3404c4455cf..528737929274 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -159,6 +159,25 @@ led@2 {
 			};
 		};
 	};
+
+	flash-led-controller@53 {
+		compatible = "silergy,sy7802";
+		reg = <0x53>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_rear_flash_default>;
+		pinctrl-names = "default";
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			led-sources = <0>, <1>;
+		};
+	};
 };
 
 &blsp_i2c3 {
@@ -318,6 +337,13 @@ camera_front_flash_default: camera-front-flash-default-state {
 		bias-disable;
 	};
 
+	camera_rear_flash_default: camera-rear-flash-default-state {
+		pins = "gpio9", "gpio16", "gpio51";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio20";
 		function = "gpio";

-- 
2.45.2