Received-SPF: pass (google.com: domain of linux-kernel+bounces-212454-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Chen Wang <unicornxw@gmail.com>
To: adrian.hunter@intel.com,
	aou@eecs.berkeley.edu,
	conor+dt@kernel.org,
	guoren@kernel.org,
	inochiama@outlook.com,
	jszhang@kernel.org,
	krzysztof.kozlowski+dt@linaro.org,
	palmer@dabbelt.com,
	paul.walmsley@sifive.com,
	robh@kernel.org,
	ulf.hansson@linaro.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-mmc@vger.kernel.org,
	linux-riscv@lists.infradead.org,
	chao.wei@sophgo.com,
	haijiao.liu@sophgo.com,
	xiaoguang.xing@sophgo.com,
	tingzhu.wang@sophgo.com
Cc: Chen Wang <unicorn_wang@outlook.com>
Subject: [PATCH v3 3/4] mmc: sdhci-of-dwcmshc: extract init function for rk35xx/th1520
Date: Thu, 13 Jun 2024 09:43:11 +0800
Message-Id: <459e341a32128ffbae5acdc77a1c835cbee582e6.1718241495.git.unicorn_wang@outlook.com>
In-Reply-To: <cover.1718241495.git.unicorn_wang@outlook.com>
References: <cover.1718241495.git.unicorn_wang@outlook.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

From: Chen Wang <unicorn_wang@outlook.com>

Extract init function for rk35xx/th1520, which is an intermediate
process before further optimization.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---
 drivers/mmc/host/sdhci-of-dwcmshc.c | 83 ++++++++++++++++-------------
 1 file changed, 46 insertions(+), 37 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 346d2d323a05..38ab755aa044 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -749,10 +749,19 @@ static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask)
 	sdhci_reset(host, mask);
 }
 
-static int rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
+static int rk35xx_init(struct device *dev, struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
 {
 	int err;
-	struct rk35xx_priv *priv = dwc_priv->priv;
+	struct rk35xx_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(struct rk35xx_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (of_device_is_compatible(dev->of_node, "rockchip,rk3588-dwcmshc"))
+		priv->devtype = DWCMSHC_RK3588;
+	else
+		priv->devtype = DWCMSHC_RK3568;
 
 	priv->reset = devm_reset_control_array_get_optional_exclusive(mmc_dev(host->mmc));
 	if (IS_ERR(priv->reset)) {
@@ -787,6 +796,8 @@ static int rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
 	sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
 	sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_STRBIN);
 
+	dwc_priv->priv = priv;
+
 	return 0;
 }
 
@@ -915,6 +926,35 @@ static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask)
 	}
 }
 
+static int th1520_init(struct device *dev,
+		       struct sdhci_host *host,
+		       struct dwcmshc_priv *dwc_priv)
+{
+	dwc_priv->delay_line = PHY_SDCLKDL_DC_DEFAULT;
+
+	if (device_property_read_bool(dev, "mmc-ddr-1_8v") ||
+	    device_property_read_bool(dev, "mmc-hs200-1_8v") ||
+	    device_property_read_bool(dev, "mmc-hs400-1_8v"))
+		dwc_priv->flags |= FLAG_IO_FIXED_1V8;
+	else
+		dwc_priv->flags &= ~FLAG_IO_FIXED_1V8;
+
+	/*
+	 * start_signal_voltage_switch() will try 3.3V first
+	 * then 1.8V. Use SDHCI_SIGNALING_180 rather than
+	 * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V
+	 * in sdhci_start_signal_voltage_switch().
+	 */
+	if (dwc_priv->flags & FLAG_IO_FIXED_1V8) {
+		host->flags &= ~SDHCI_SIGNALING_330;
+		host->flags |=  SDHCI_SIGNALING_180;
+	}
+
+	sdhci_enable_v4_mode(host);
+
+	return 0;
+}
+
 static void cv18xx_sdhci_reset(struct sdhci_host *host, u8 mask)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1230,46 +1270,15 @@ static int dwcmshc_probe(struct platform_device *pdev)
 	host->mmc_host_ops.execute_tuning = dwcmshc_execute_tuning;
 
 	if (pltfm_data == &sdhci_dwcmshc_rk35xx_pdata) {
-		rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk35xx_priv), GFP_KERNEL);
-		if (!rk_priv) {
-			err = -ENOMEM;
-			goto err_clk;
-		}
-
-		if (of_device_is_compatible(pdev->dev.of_node, "rockchip,rk3588-dwcmshc"))
-			rk_priv->devtype = DWCMSHC_RK3588;
-		else
-			rk_priv->devtype = DWCMSHC_RK3568;
-
-		priv->priv = rk_priv;
-
-		err = rk35xx_init(host, priv);
+		err = rk35xx_init(&pdev->dev, host, priv);
 		if (err)
 			goto err_clk;
 	}
 
 	if (pltfm_data == &sdhci_dwcmshc_th1520_pdata) {
-		priv->delay_line = PHY_SDCLKDL_DC_DEFAULT;
-
-		if (device_property_read_bool(dev, "mmc-ddr-1_8v") ||
-		    device_property_read_bool(dev, "mmc-hs200-1_8v") ||
-		    device_property_read_bool(dev, "mmc-hs400-1_8v"))
-			priv->flags |= FLAG_IO_FIXED_1V8;
-		else
-			priv->flags &= ~FLAG_IO_FIXED_1V8;
-
-		/*
-		 * start_signal_voltage_switch() will try 3.3V first
-		 * then 1.8V. Use SDHCI_SIGNALING_180 rather than
-		 * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V
-		 * in sdhci_start_signal_voltage_switch().
-		 */
-		if (priv->flags & FLAG_IO_FIXED_1V8) {
-			host->flags &= ~SDHCI_SIGNALING_330;
-			host->flags |=  SDHCI_SIGNALING_180;
-		}
-
-		sdhci_enable_v4_mode(host);
+		err = th1520_init(&pdev->dev, host, priv);
+		if (err)
+			goto err_clk;
 	}
 
 #ifdef CONFIG_ACPI
-- 
2.25.1