Received-SPF: pass (google.com: domain of linux-kernel+bounces-212754-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Date: Thu, 13 Jun 2024 08:54:38 +0100
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Luo Jie <quic_luoj@quicinc.com>
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, andrew@lunn.ch, hkallweit1@gmail.com,
	corbet@lwn.net, vladimir.oltean@nxp.com, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org
Subject: Re: [PATCH net-next 1/2] net: phy: introduce core support for
 phy-mode = "10g-qxgmii"
Message-ID: <Zmqlvn2gOlxoy5Gm@shell.armlinux.org.uk>
References: <20240612095317.1261855-1-quic_luoj@quicinc.com>
 <20240612095317.1261855-2-quic_luoj@quicinc.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240612095317.1261855-2-quic_luoj@quicinc.com>
Sender: Russell King (Oracle) <linux@armlinux.org.uk>

On Wed, Jun 12, 2024 at 05:53:16PM +0800, Luo Jie wrote:
> @@ -1865,7 +1872,8 @@ static int phylink_validate_phy(struct phylink *pl, struct phy_device *phy,
>  	if (phy->is_c45 && state->rate_matching == RATE_MATCH_NONE &&
>  	    state->interface != PHY_INTERFACE_MODE_RXAUI &&
>  	    state->interface != PHY_INTERFACE_MODE_XAUI &&
> -	    state->interface != PHY_INTERFACE_MODE_USXGMII)
> +	    state->interface != PHY_INTERFACE_MODE_USXGMII &&
> +	    state->interface != PHY_INTERFACE_MODE_10G_QXGMII)
>  		state->interface = PHY_INTERFACE_MODE_NA;

It would be better, rather than extending this workaround, instead to
have the PHY driver set phy->possible_interfaces in its .config_init
method. phy->possible_interfaces should be the set of interfaces that
the PHY _will_ use given its configuration for the different media
speeds. I think that means just PHY_INTERFACE_MODE_10G_QXGMII for
your configuration.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!