Received-SPF: pass (google.com: domain of linux-kernel+bounces-213105-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Alisa-Dariana Roman <alisadariana@gmail.com>
To: Alisa-Dariana Roman <alisa.roman@analog.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	Michael Hennerich <michael.hennerich@analog.com>,
	linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Alexandru Tachici <alexandru.tachici@analog.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Michael Hennerich <Michael.Hennerich@analog.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Subject: [PATCH v4 3/5] iio: adc: ad7192: Update clock config
Date: Thu, 13 Jun 2024 14:39:59 +0300
Message-Id: <20240613114001.270233-4-alisa.roman@analog.com>
In-Reply-To: <20240613114001.270233-1-alisa.roman@analog.com>
References: <20240613114001.270233-1-alisa.roman@analog.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

There are actually 4 configuration modes of clock source for AD719X
devices. Either a crystal can be attached externally between MCLK1 and
MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
pin. The other 2 modes make use of the 4.92MHz internal clock.

Removed properties adi,int-clock-output-enable and adi,clock-xtal were
undocumented. Use cleaner alternative of configuring external clock by
using clock names mclk and xtal.

Removed functionality of AD7192_CLK_INT_CO restored in complementary
patch.

Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
---
 drivers/iio/adc/ad7192.c | 56 ++++++++++++++++++++--------------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index c7fb51a90e87..c30ffe47cd70 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -398,25 +398,37 @@ static inline bool ad7192_valid_external_frequency(u32 freq)
 		freq <= AD7192_EXT_FREQ_MHZ_MAX);
 }
 
-static int ad7192_clock_select(struct ad7192_state *st)
+static const char *const ad7192_clock_names[] = {
+	"xtal",
+	"mclk"
+};
+
+static int ad7192_clock_setup(struct ad7192_state *st)
 {
 	struct device *dev = &st->sd.spi->dev;
-	unsigned int clock_sel;
-
-	clock_sel = AD7192_CLK_INT;
+	int ret;
 
-	/* use internal clock */
-	if (!st->mclk) {
-		if (device_property_read_bool(dev, "adi,int-clock-output-enable"))
-			clock_sel = AD7192_CLK_INT_CO;
+	ret = device_property_match_property_string(dev, "clock-names",
+						    ad7192_clock_names,
+						    ARRAY_SIZE(ad7192_clock_names));
+	if (ret < 0) {
+		st->clock_sel = AD7192_CLK_INT;
+		st->fclk = AD7192_INT_FREQ_MHZ;
 	} else {
-		if (device_property_read_bool(dev, "adi,clock-xtal"))
-			clock_sel = AD7192_CLK_EXT_MCLK1_2;
-		else
-			clock_sel = AD7192_CLK_EXT_MCLK2;
+		st->clock_sel = AD7192_CLK_EXT_MCLK1_2 + ret;
+
+		st->mclk = devm_clk_get_enabled(dev, ad7192_clock_names[ret]);
+		if (IS_ERR(st->mclk))
+			return dev_err_probe(dev, PTR_ERR(st->mclk),
+					     "Failed to get mclk\n");
+
+		st->fclk = clk_get_rate(st->mclk);
+		if (!ad7192_valid_external_frequency(st->fclk))
+			return dev_err_probe(dev, -EINVAL,
+					     "External clock frequency out of bounds\n");
 	}
 
-	return clock_sel;
+	return 0;
 }
 
 static int ad7192_setup(struct iio_dev *indio_dev, struct device *dev)
@@ -1306,21 +1318,9 @@ static int ad7192_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	st->fclk = AD7192_INT_FREQ_MHZ;
-
-	st->mclk = devm_clk_get_optional_enabled(dev, "mclk");
-	if (IS_ERR(st->mclk))
-		return PTR_ERR(st->mclk);
-
-	st->clock_sel = ad7192_clock_select(st);
-
-	if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
-	    st->clock_sel == AD7192_CLK_EXT_MCLK2) {
-		st->fclk = clk_get_rate(st->mclk);
-		if (!ad7192_valid_external_frequency(st->fclk))
-			return dev_err_probe(dev, -EINVAL,
-					     "External clock frequency out of bounds\n");
-	}
+	ret = ad7192_clock_setup(st);
+	if (ret)
+		return ret;
 
 	ret = ad7192_setup(indio_dev, dev);
 	if (ret)
-- 
2.34.1