Received-SPF: pass (google.com: domain of linux-kernel+bounces-213309-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
From: Alexandre Bailon <abailon@baylibre.com>
To: rafael@kernel.org,
	daniel.lezcano@linaro.org,
	robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org
Cc: rui.zhang@intel.com,
	lukasz.luba@arm.com,
	linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Alexandre Bailon <abailon@baylibre.com>
Subject: [PATCH v4 0/4] thermal: Add support of multiple sensors
Date: Thu, 13 Jun 2024 15:24:06 +0200
Message-ID: <20240613132410.161663-1-abailon@baylibre.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Following this comment [1], this updates thermal_of to support multiple
sensors.

This series intends to add support of thermal aggregation.
One use case for it is using the IPA in the case we have
multiple sensors for one performance domain.

This has been tested on the mt8195 using s-tui.
To test and validate, we heat up the CPU and the heat sink.
At some point, we run benchmark tests with different configurations:
- Mediatek kernel (IPA + their own thermal aggregation)
- Mainline kernel
- Mainline kernel with IPA and aggregation enabled
With the IPA and the aggregation enabled, we get the best performances
with the most stable CPU temperature.

The aggregation is configured and enabled using device tree.
One thermal zone has to be created with a list of sensors.
It will take care of registering a thermal zone for each sensors.
The cooling device will only be registered with the aggregating thermal
zone.

There are still something important missing: a way to check that all
aggregated sensors are part of the same performance domain.
So far, I don't see how this should be done. Some recommendations would be
appreciated.

Changes in v2:
- Rebased on 6.7
- Separated generic multi sensor and dt specific code
- Simplified the code
- Drop min / max and only do weighted average (seems more adequate for IPA)

Changes in v3:
- Rebased on 6.9
- Reworked the way to register a multi sensor thermal zone
  - Only one thermal zone to define in device tree
- Max has been re-added
- Enabled it on mt8195

Changes in v4:
- Rebased on lastest master (fixed the build issue)
- Dropped the average since I don't have any usecase for it

[1]: https://patchwork.kernel.org/comment/24723927/

Alexandre Bailon (4):
  dt-bindings: thermal: Restore the thermal-sensors property
  thermal: Add support of multi sensors to thermal_core
  thermal: Add support of multi sensors to thermal_of
  ARM64: mt8195: Use thermal aggregation for big and little cpu

 .../bindings/thermal/thermal-zones.yaml       |   5 +-
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      | 212 ++-----------
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/thermal_core.h                |  15 +
 drivers/thermal/thermal_multi.c               | 288 ++++++++++++++++++
 drivers/thermal/thermal_of.c                  | 250 ++++++++++++++-
 include/uapi/linux/thermal.h                  |   5 +
 7 files changed, 579 insertions(+), 197 deletions(-)
 create mode 100644 drivers/thermal/thermal_multi.c

-- 
2.44.1