Received-SPF: pass (google.com: domain of linux-kernel+bounces-213767-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Date: Thu, 13 Jun 2024 18:44:25 +0100
From: Lee Jones <lee@kernel.org>
To: Johan Hovold <johan+linaro@kernel.org>
Cc: Mark Brown <broonie@kernel.org>, Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Das Srinagesh <quic_gurus@quicinc.com>,
	Satya Priya Kakitapalli <quic_skakitap@quicinc.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Stephen Boyd <swboyd@chromium.org>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 00/12] arm64: dts: qcom: sc8280xp-x13s: enable pm8008
 camera pmic
Message-ID: <20240613174425.GV2561462@google.com>
References: <20240608155526.12996-1-johan+linaro@kernel.org>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20240608155526.12996-1-johan+linaro@kernel.org>

On Sat, 08 Jun 2024, Johan Hovold wrote:

> The Qualcomm PM8008 PMIC is a so called QPNP PMIC with seven LDO
> regulators, a temperature alarm block and two GPIO pins (which are also
> used for interrupt signalling and reset).

[...]

> Johan
> 
> [1] https://lore.kernel.org/all/1655200111-18357-1-git-send-email-quic_c_skakit@quicinc.com
> [2] https://lore.kernel.org/lkml/20231003152927.15000-3-johan+linaro@kernel.org
> [3] https://lore.kernel.org/r/20220828132648.3624126-3-bryan.odonoghue@linaro.org
> 
> 
> Changes in v3
>  - capitalise MFD commit summaries
>  - drop pinctrl patches which have been applied for 6.10
>  - amend binding commit message to clarify that the binding is unused
>  - move pinctrl subschema under pinctrl node in binding
> 
> Changes in v2
>  - use IRQ_TYPE_SENSE_MASK in regmap_irq table
>  - add post-reset delay
>  - reorder pinctrl binding and driver update
>  - split out binding cleanups
>  - use platform_device_id matching
>  - replace underscore in supply names with dash
>  - use more fine-grained includes in regulator driver
>  - rework regulator driver and update authorship
> 
> 
> Johan Hovold (12):
>   dt-bindings: mfd: pm8008: Add reset gpio
>   mfd: pm8008: Fix regmap irq chip initialisation
>   mfd: pm8008: Deassert reset on probe
>   mfd: pm8008: Mark regmap structures as const
>   mfd: pm8008: Use lower case hex notation
>   mfd: pm8008: Rename irq chip
>   mfd: pm8008: Drop unused driver data
>   dt-bindings: mfd: pm8008: Drop redundant descriptions
>   dt-bindings: mfd: pm8008: Rework binding
>   mfd: pm8008: Rework to match new DT binding
>   regulator: add pm8008 pmic regulator driver
>   arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic
> 
>  .../devicetree/bindings/mfd/qcom,pm8008.yaml  | 144 +++++++------
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 123 +++++++++++
>  drivers/mfd/Kconfig                           |   1 +
>  drivers/mfd/qcom-pm8008.c                     | 169 ++++++++++-----
>  drivers/regulator/Kconfig                     |   7 +
>  drivers/regulator/Makefile                    |   1 +
>  drivers/regulator/qcom-pm8008-regulator.c     | 198 ++++++++++++++++++
>  include/dt-bindings/mfd/qcom-pm8008.h         |  19 --
>  8 files changed, 532 insertions(+), 130 deletions(-)
>  create mode 100644 drivers/regulator/qcom-pm8008-regulator.c
>  delete mode 100644 include/dt-bindings/mfd/qcom-pm8008.h

Applied patches 1-11 and submitted for build testing.

Once complete, I'll get the pull-request out for Mark.

-- 
Lee Jones [李琼斯]