Received-SPF: pass (google.com: domain of linux-kernel+bounces-215416-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Date: Fri, 14 Jun 2024 13:41:20 -0500
From: Bjorn Helgaas <helgaas@kernel.org>
To: Bitao Hu <yaoma@linux.alibaba.com>
Cc: lukas@wunner.de, bhelgaas@google.com, weirongguang@kylinos.cn,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	kanie@linux.alibaba.com,
	Ilpo =?utf-8?B?SsOkcnZpbmVu?= <ilpo.jarvinen@linux.intel.com>
Subject: Re: [PATCHv2] PCI: pciehp: Use appropriate conditions to check the
 hotplug controller status
Message-ID: <20240614184120.GA1121063@bhelgaas>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240528064200.87762-1-yaoma@linux.alibaba.com>

[+cc Ilpo]

On Tue, May 28, 2024 at 02:42:00PM +0800, Bitao Hu wrote:
> "present" and "link_active" can be 1 if the status is ready, and 0 if
> it is not. Both of them can be -ENODEV if reading the config space
> of the hotplug port failed. That's typically the case if the hotplug
> port itself was hot-removed. Therefore, this situation can occur:
> pciehp_card_present() may return 1 and pciehp_check_link_active()
> may return -ENODEV because the hotplug port was hot-removed in-between
> the two function calls. In that case we'll emit both "Card present"
> *and* "Link Up" since both 1 and -ENODEV are considered "true". This
> is not the expected behavior. Those messages should be emited when
> "present" and "link_active" are positive.
> 
> Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
> Reviewed-by: Lukas Wunner <lukas@wunner.de>
> ---
> v1 -> v2:
> 1. Explain the rationale of the code change in the commit message
> more clearly.
> 2. Add the "Reviewed-by" tag of Lukas.
> ---
>  drivers/pci/hotplug/pciehp_ctrl.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
> index dcdbfcf404dd..6adfdbb70150 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -276,10 +276,10 @@ void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
>  	case OFF_STATE:
>  		ctrl->state = POWERON_STATE;
>  		mutex_unlock(&ctrl->state_lock);
> -		if (present)
> +		if (present > 0)

I completely agree that this is a problem and this patch addresses it.
But ...

It seems a little bit weird to me that we even get to this switch
statement if we got -ENODEV from either pciehp_card_present() or
pciehp_check_link_active().  If that happens, a config read failed,
but we're going to go ahead and call pciehp_enable_slot(), which is
going to do a bunch more config accesses, potentially try to power up
the slot, etc.

If a config read failed, it seems like we might want to avoid doing
some of this stuff.

>  			ctrl_info(ctrl, "Slot(%s): Card present\n",
>  				  slot_name(ctrl));
> -		if (link_active)
> +		if (link_active > 0)
>  			ctrl_info(ctrl, "Slot(%s): Link Up\n",
>  				  slot_name(ctrl));

These are cases where we misinterpreted -ENODEV as "device is present"
or "link is active".

pciehp_ignore_dpc_link_change() and pciehp_slot_reset() also call
pciehp_check_link_active(), and I think they also interpret -ENODEV as
"link is active".

Do we need similar changes there?

>  		ctrl->request_result = pciehp_enable_slot(ctrl);
> -- 
> 2.37.1 (Apple Git-137.1)
>