Date: Sun, 17 Feb 2008 18:49:10 +0100
From: Malte =?UTF-8?B?U2NocsO2ZGVy?= <maltesch@gmx.de>
To: Malte =?UTF-8?B?U2NocsO2ZGVy?= <maltesch@gmx.de>
Cc: linux-kernel@vger.kernel.org
Subject: [FIXED] Re: kernel 2.6.24{,.1} ahci problem, does not boot
Message-ID: <20080217184910.2e0b5da1@highlander.home.lan>
In-Reply-To: <20080209133021.45377af4@highlander.home.lan>
References: <20080209133021.45377af4@highlander.home.lan>
Mime-Version: 1.0
Content-Type: multipart/signed; boundary="Sig_/Z_cQxfmLWJC9_RtBsv30fwO";
 protocol="application/pgp-signature"; micalg=PGP-SHA1
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 3400
Lines: 90

--Sig_/Z_cQxfmLWJC9_RtBsv30fwO
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

Okay, I updated the BIOS and the problem disappeared. The mainboard is
an Asus M2R32-MVP by the way.


On Sat, 9 Feb 2008 13:30:21 +0100
Malte Schr=C3=B6der <maltesch@gmx.de> wrote:

> Hello,
> on one of my machines neither 2.6.24 nor 2.6.24.1 work.
> The system is 64bit on Athlon X2 and ATI-Chipset (SB600).
>=20
> Extract from the kernel messages during boot:
>=20
> [   66.943103] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing =
32bit
> [   66.950374] ahci 0000:00:12.0: controller can't do PMP, turning off CA=
P_PMP
> [   67.956470] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps =
0xf impl SATA mode
> [   67.964996] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slu=
m part
> [   67.972820] scsi0 : ahci
> [   67.975699] scsi1 : ahci
> [   67.978445] scsi2 : ahci
> [   67.981178] scsi3 : ahci
> [   67.983949] ata1: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadff=
d00 irq 509
> [   67.991825] ata2: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadff=
d80 irq 509
> [   67.999729] ata3: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadff=
e00 irq 509
> [   68.007619] ata4: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadff=
e80 irq 509
> [   68.470669] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   98.431945] ata1.00: qc timeout (cmd 0xec)
> [   98.454907] ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4)
> [   98.461296] ata1: failed to recover some devices, retrying in 5 secs
> [  103.916773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [  133.878045] ata1.00: qc timeout (cmd 0xec)
> [  133.882371] ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4)
> [  133.888797] ata1: failed to recover some devices, retrying in 5 secs
> [  139.343901] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [  169.305174] ata1.00: qc timeout (cmd 0xec)
> [  169.309534] ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4)
> [  169.315926] ata1: failed to recover some devices, retrying in 5 secs
> [  174.771030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>=20
> The complete boot-log (captured via serial console), lspci output,
> output of hdparm -I and the kernel config are attached.
>=20
> The PC has one IDE-drive and four SATA-drives (see hdparm.txt).
> If I wait long enough, the IDE-drive get's recognized and I can
> continue the boot process, but the SATA-drives are never recognized.
> The system work's fine with kernel 2.6.23.11 (later kernels not tested).
>=20
> I hope someone can help ...
>=20
> Regards


--=20
---------------------------------------
Malte Schr=C3=B6der
MalteSch@gmx.de
ICQ# 68121508
---------------------------------------


--Sig_/Z_cQxfmLWJC9_RtBsv30fwO
Content-Type: application/pgp-signature; name=signature.asc
Content-Disposition: attachment; filename=signature.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD4DBQFHuHOa4q3E2oMjYtURAqgoAJ4z31mnVBQ4kzfvURjkWz2GvaulfwCY44MV
mBEafdt/YoSaOaKg+FG+/Q==
=5AYC
-----END PGP SIGNATURE-----

--Sig_/Z_cQxfmLWJC9_RtBsv30fwO--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/