Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758133AbYBSLQM (ORCPT ); Tue, 19 Feb 2008 06:16:12 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1759561AbYBSLNl (ORCPT ); Tue, 19 Feb 2008 06:13:41 -0500 Received: from sca-es-mail-2.Sun.COM ([192.18.43.133]:37007 "EHLO sca-es-mail-2.sun.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758280AbYBSLNc (ORCPT ); Tue, 19 Feb 2008 06:13:32 -0500 Date: Tue, 19 Feb 2008 03:21:06 -0800 From: Yinghai Lu Subject: [PATCH 7/8] x86_64: get boot_cpu_id as early for k8_scan_nodes In-reply-to: <200802190311.44404.yinghai.lu@sun.com> To: Ingo Molnar Cc: Greg KH , Andrew Morton , Jeff Garzik , Linux Kernel Mailing List Message-id: <200802190321.07014.yinghai.lu@sun.com> Organization: Sun MIME-version: 1.0 Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Content-disposition: inline References: <200802190311.44404.yinghai.lu@sun.com> User-Agent: KMail/1.9.6 (enterprise 20070904.708012) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13473 Lines: 474 When acpi=off or there is no SRAT defined, apicid_to_node is got from K8 Northbridge PCI configuration space in k8_scan_nodes() in arch/x86_64/mm/k8toplogy.c. The problem is that it assumes bsp apic id is 0 at that point. For four socket system with Quad core cpus installed, all cpus apic id is offset by 4, and bsp apic id is 4. For eight socket system with dual core cpus installed, all cpus apic id is offset by 2, and bsp apic id is 2. We need get boot_cpu_id --- bsp apic id, before k8_scan_nodes by called. So create early_acpi_boot_init and early_get_smp_config for get boot_cpu_id. Signed-off-by: Yinghai Lu arch/x86_64/mm/k8topology.c | 8 +++ b/arch/i386/kernel/acpi/boot.c | 70 ++++++++++++++++++++++++++++++++ b/arch/x86_64/kernel/apic.c | 29 +++++++++++-- b/arch/x86_64/kernel/mpparse.c | 89 ++++++++++++++++++++++++++++++----------- b/arch/x86_64/kernel/setup.c | 21 +++++++++ b/include/asm-x86_64/apic.h | 2 b/include/asm-x86_64/mpspec.h | 2 b/include/linux/acpi.h | 5 ++ 8 files changed, 198 insertions(+), 28 deletions(-) Index: linux-2.6/arch/x86/mm/k8topology_64.c =================================================================== --- linux-2.6.orig/arch/x86/mm/k8topology_64.c +++ linux-2.6/arch/x86/mm/k8topology_64.c @@ -13,12 +13,15 @@ #include #include #include +#include #include #include #include #include #include #include +#include +#include static __init int find_northbridge(void) { @@ -44,6 +47,30 @@ static __init int find_northbridge(void) return -1; } +static __init void early_get_boot_cpu_id(void) +{ + /* + * need to get boot_cpu_id so can use that to create apicid_to_node + * in k8_scan_nodes() + */ + /* + * Find possible boot-time SMP configuration: + */ + early_find_smp_config(); +#ifdef CONFIG_ACPI + /* + * Read APIC information from ACPI tables. + */ + early_acpi_boot_init(); +#endif + /* + * get boot-time SMP configuration: + */ + if (smp_found_config) + early_get_smp_config(); + early_init_lapic_mapping(); +} + int __init k8_scan_nodes(unsigned long start, unsigned long end) { unsigned long prevbase; @@ -56,6 +83,7 @@ int __init k8_scan_nodes(unsigned long s unsigned cores; unsigned bits; int j; + unsigned apicid_base; if (!early_pci_allowed()) return -1; @@ -174,11 +202,18 @@ int __init k8_scan_nodes(unsigned long s /* use the coreid bits from early_identify_cpu */ bits = boot_cpu_data.x86_coreid_bits; cores = (1< 0) { + printk(KERN_INFO "BSP APIC ID: %02x\n", boot_cpu_id); + apicid_base = boot_cpu_id; + } for (i = 0; i < 8; i++) { if (nodes[i].start != nodes[i].end) { nodeid = nodeids[i]; - for (j = 0; j < cores; j++) + for (j = apicid_base; j < cores + apicid_base; j++) apicid_to_node[(nodeid << bits) + j] = i; setup_node_bootmem(i, nodes[i].start, nodes[i].end); } Index: linux-2.6/arch/x86/kernel/acpi/boot.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/acpi/boot.c +++ linux-2.6/arch/x86/kernel/acpi/boot.c @@ -731,6 +731,32 @@ static int __init acpi_parse_fadt(struct * Parse LAPIC entries in MADT * returns 0 on success, < 0 on error */ +static int __init early_acpi_parse_madt_lapic_addr_ovr(void) +{ + int count; + + if (!cpu_has_apic) + return -ENODEV; + + /* + * Note that the LAPIC address is obtained from the MADT (32-bit value) + * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). + */ + + count = + acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, + acpi_parse_lapic_addr_ovr, 0); + if (count < 0) { + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); + return count; + } + + mp_register_lapic_address(acpi_lapic_addr); + + return count; +} + static int __init acpi_parse_madt_lapic_entries(void) { int count; @@ -857,6 +883,33 @@ static inline int acpi_parse_madt_ioapic } #endif /* !CONFIG_X86_IO_APIC */ +static void __init early_acpi_process_madt(void) +{ +#ifdef CONFIG_X86_LOCAL_APIC + int error; + + if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { + + /* + * Parse MADT LAPIC entries + */ + error = early_acpi_parse_madt_lapic_addr_ovr(); + if (!error) { + acpi_lapic = 1; + smp_found_config = 1; + } + if (error == -EINVAL) { + /* + * Dell Precision Workstation 410, 610 come here. + */ + printk(KERN_ERR PREFIX + "Invalid BIOS MADT, disabling ACPI\n"); + disable_acpi(); + } + } +#endif +} + static void __init acpi_process_madt(void) { #ifdef CONFIG_X86_LOCAL_APIC @@ -1189,6 +1242,23 @@ int __init acpi_boot_table_init(void) return 0; } +int __init early_acpi_boot_init(void) +{ + /* + * If acpi_disabled, bail out + * One exception: acpi=ht continues far enough to enumerate LAPICs + */ + if (acpi_disabled && !acpi_ht) + return 1; + + /* + * Process the Multiple APIC Description Table (MADT), if present + */ + early_acpi_process_madt(); + + return 0; +} + int __init acpi_boot_init(void) { /* Index: linux-2.6/arch/x86/kernel/mpparse_64.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/mpparse_64.c +++ linux-2.6/arch/x86/kernel/mpparse_64.c @@ -217,8 +217,7 @@ static void __init MP_lintsrc_info (stru /* * Read/parse the MPC */ - -static int __init smp_read_mpc(struct mp_config_table *mpc) +static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) { char str[16]; int count=sizeof(*mpc); @@ -259,6 +258,9 @@ static int __init smp_read_mpc(struct mp if (!acpi_lapic) mp_lapic_addr = mpc->mpc_lapic; + if (early) + return 1; + /* * Now process the configuration blocks. */ @@ -470,27 +472,38 @@ static struct intel_mp_floating *mpf_fou /* * Scan the memory blocks for an SMP configuration block. */ -void __init get_smp_config (void) +static void __init __get_smp_config(unsigned early) { struct intel_mp_floating *mpf = mpf_found; + if (acpi_lapic && early) + return; /* - * ACPI supports both logical (e.g. Hyper-Threading) and physical - * processors, where MPS only supports physical. - */ - if (acpi_lapic && acpi_ioapic) { - printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n"); - return; - } - else if (acpi_lapic) - printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); + * ACPI supports both logical (e.g. Hyper-Threading) and physical + * processors, where MPS only supports physical. + */ + if (acpi_lapic && acpi_ioapic) { + printk(KERN_INFO "Using ACPI (MADT) for SMP configuration " + "information\n"); + return; + } else if (acpi_lapic) + printk(KERN_INFO "Using ACPI for processor (LAPIC) " + "configuration information\n"); - printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); + printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", + mpf->mpf_specification); /* * Now see if we need to read further. */ if (mpf->mpf_feature1 != 0) { + if (early) { + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + return; + } printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1); construct_default_ISA_mptable(mpf->mpf_feature1); @@ -501,12 +514,15 @@ void __init get_smp_config (void) * Read the physical hardware table. Anything here will * override the defaults. */ - if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) { smp_found_config = 0; printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); return; } + + if (early) + return; /* * If there are no explicit MP IRQ entries, then we are * broken. We set up most of the low 16 IO-APIC pins to @@ -528,13 +544,25 @@ void __init get_smp_config (void) } else BUG(); - printk(KERN_INFO "Processors: %d\n", num_processors); + if (!early) + printk(KERN_INFO "Processors: %d\n", num_processors); /* * Only use the first configuration found. */ } -static int __init smp_scan_config (unsigned long base, unsigned long length) +void __init early_get_smp_config(void) +{ + __get_smp_config(1); +} + +void __init get_smp_config(void) +{ + __get_smp_config(0); +} + +static int __init smp_scan_config(unsigned long base, unsigned long length, + unsigned reserve) { extern void __bad_mpf_size(void); unsigned int *bp = phys_to_virt(base); @@ -553,10 +581,15 @@ static int __init smp_scan_config (unsig || (mpf->mpf_specification == 4)) ) { smp_found_config = 1; + mpf_found = mpf; + + if (!reserve) + return 1; + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); if (mpf->mpf_physptr) - reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE); - mpf_found = mpf; + reserve_bootmem_generic(mpf->mpf_physptr, + PAGE_SIZE); return 1; } bp += 4; @@ -565,7 +598,7 @@ static int __init smp_scan_config (unsig return 0; } -void __init find_smp_config(void) +static void __init __find_smp_config(unsigned reserve) { unsigned int address; @@ -577,9 +610,9 @@ void __init find_smp_config(void) * 2) Scan the top 1K of base RAM * 3) Scan the 64K of bios */ - if (smp_scan_config(0x0,0x400) || - smp_scan_config(639*0x400,0x400) || - smp_scan_config(0xF0000,0x10000)) + if (smp_scan_config(0x0, 0x400, reserve) || + smp_scan_config(639*0x400, 0x400, reserve) || + smp_scan_config(0xF0000, 0x10000, reserve)) return; /* * If it is an SMP machine we should know now. @@ -596,13 +629,23 @@ void __init find_smp_config(void) address = *(unsigned short *)phys_to_virt(0x40E); address <<= 4; - if (smp_scan_config(address, 0x1000)) + if (smp_scan_config(address, 0x1000, reserve)) return; /* If we have come this far, we did not find an MP table */ printk(KERN_INFO "No mptable found.\n"); } +void __init early_find_smp_config(void) +{ + __find_smp_config(0); +} + +void __init find_smp_config(void) +{ + __find_smp_config(1); +} + /* -------------------------------------------------------------------------- ACPI-based MP Configuration -------------------------------------------------------------------------- */ Index: linux-2.6/include/linux/acpi.h =================================================================== --- linux-2.6.orig/include/linux/acpi.h +++ linux-2.6/include/linux/acpi.h @@ -79,6 +79,7 @@ typedef int (*acpi_table_handler) (struc typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end); char * __acpi_map_table (unsigned long phys_addr, unsigned long size); +int early_acpi_boot_init(void); int acpi_boot_init (void); int acpi_boot_table_init (void); int acpi_numa_init (void); @@ -235,6 +236,10 @@ int acpi_check_mem_region(resource_size_ #else /* CONFIG_ACPI */ +static inline int early_acpi_boot_init(void) +{ + return 0; +} static inline int acpi_boot_init(void) { return 0; Index: linux-2.6/include/asm-x86/mpspec.h =================================================================== --- linux-2.6.orig/include/asm-x86/mpspec.h +++ linux-2.6/include/asm-x86/mpspec.h @@ -26,6 +26,9 @@ extern int pic_mode; extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); +extern void early_find_smp_config(void); +extern void early_get_smp_config(void); + #endif extern int mp_bus_id_to_pci_bus[MAX_MP_BUSSES]; Index: linux-2.6/include/asm-x86/apic.h =================================================================== --- linux-2.6.orig/include/asm-x86/apic.h +++ linux-2.6/include/asm-x86/apic.h @@ -124,6 +124,7 @@ extern void enable_NMI_through_LVT0(void */ #ifdef CONFIG_X86_64 extern void setup_apic_routing(void); +extern void early_init_lapic_mapping(void); #endif extern u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask); Index: linux-2.6/arch/x86/kernel/apic_64.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/apic_64.c +++ linux-2.6/arch/x86/kernel/apic_64.c @@ -861,6 +861,30 @@ static int __init detect_init_APIC(void) return 0; } +void __init early_init_lapic_mapping(void) +{ + unsigned long apic_phys; + + /* + * If no local APIC can be found then go out + * : it means there is no mpatable and MADT + */ + if (!smp_found_config) + return; + + apic_phys = mp_lapic_addr; + + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", + APIC_BASE, apic_phys); + + /* + * Fetch the APIC ID of the BSP in case we have a + * default configuration (or the MP table is broken). + */ + boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); +} + /** * init_apic_mappings - initialize APIC mappings */ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/