Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934511AbYBVCGb (ORCPT ); Thu, 21 Feb 2008 21:06:31 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758501AbYBVCGU (ORCPT ); Thu, 21 Feb 2008 21:06:20 -0500 Received: from gir.skynet.ie ([193.1.99.77]:44809 "EHLO gir.skynet.ie" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758423AbYBVCGT (ORCPT ); Thu, 21 Feb 2008 21:06:19 -0500 Date: Fri, 22 Feb 2008 02:06:15 +0000 (GMT) From: Dave Airlie X-X-Sender: airlied@skynet.skynet.ie To: Gabriel C cc: Linux Kernel Mailing List , Gabriel C Subject: Re: modular intel-agp does not work on my box In-Reply-To: <47BE222B.2080500@googlemail.com> Message-ID: References: <47BE222B.2080500@googlemail.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 30598 Lines: 567 > Hi, > > When building agp* modular ( CONFIG_AGP=y/m and CONFIG_AGP_INTEL=m ) intel-agp does nothing on my box > ( Dell Precision WorkStation 530 MT ) chipset is not being detected. > > Building both Y fixes that and agpgart works and also detects my chipset. Have you got EDAC modules built as well? they might be taking ownership when they shouldn't.. Dave. > > .. > > Linux agpgart interface v0.102 > agpgart: Detected an Intel i860 Chipset. > agpgart: AGP aperture is 256M @ 0xe0000000 > > .. > > Also I've tested kernel 2.6.24.2 and 2.6.25-rc2 both with same result. > > lspci -vvvxxx output : > > 00:00.0 Host bridge: Intel Corporation 82860 860 (Wombat) Chipset Host Bridge (MCH) (rev 04) > Subsystem: Dell Unknown device 00d8 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] > Capabilities: [a0] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4 > Kernel driver in use: agpgart-intel > Kernel modules: i82860_edac > 00: 86 80 31 25 06 01 90 a0 04 00 00 06 00 00 00 00 > 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 d8 00 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 > 40: d4 d4 92 80 80 80 80 80 80 80 80 80 80 80 80 80 > 50: 05 6b 02 00 00 00 00 00 00 10 11 11 01 00 11 11 > 60: 10 00 20 08 28 10 28 10 28 10 28 10 28 10 28 10 > 70: 28 10 28 10 28 10 28 10 28 10 28 10 28 10 28 10 > 80: 00 00 00 00 00 00 00 00 0f 00 00 00 00 00 00 00 > 90: 0b 00 0b 00 61 01 01 08 55 19 00 00 81 0a 38 00 > a0: 02 00 20 00 17 02 00 1f 14 03 00 00 00 00 00 00 > b0: 80 00 00 00 00 00 00 00 00 00 04 27 20 10 8b 00 > c0: 44 c0 50 11 00 28 00 00 00 00 00 00 03 00 00 00 > d0: 02 28 00 0e 03 00 00 33 af 09 31 b5 01 00 0b 00 > e0: 00 00 6a 00 00 00 00 01 2a 25 2b 33 07 00 00 00 > f0: 00 00 01 00 74 f8 30 80 38 0f 00 00 00 00 00 00 > > 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: ff800000-ff9fffff > Prefetchable memory behind bridge: d0000000-dfffffff > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Kernel modules: shpchp > 00: 86 80 32 25 07 01 a0 00 04 00 04 06 00 40 01 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 40 e0 e0 a0 22 > 20: 80 ff 90 ff 00 d0 f0 df 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:02.0 PCI bridge: Intel Corporation 82860 860 (Wombat) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64 > Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: ff500000-ff7fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Kernel modules: shpchp > 00: 86 80 33 25 07 01 a0 00 04 00 04 06 00 40 01 00 > 10: 00 00 00 00 00 00 00 00 00 02 03 00 d0 d0 a0 02 > 20: 50 ff 70 ff f0 ff 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 02 28 00 0e 23 14 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: ff300000-ff4fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Kernel modules: shpchp > 00: 86 80 4e 24 07 01 80 00 04 00 04 06 00 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 04 04 40 c0 c0 80 22 > 20: 30 ff 40 ff f0 ff 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 > 40: 00 28 20 20 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 92 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 10 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 01 00 02 00 03 00 c0 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 > > 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Kernel modules: intel-rng, iTCO_wdt > 00: 86 80 40 24 0f 00 80 02 04 00 01 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 81 08 00 00 10 00 00 00 > 60: 8b 89 80 8b 90 00 00 00 80 80 8b 84 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: df fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00 > c0: 00 00 00 00 04 08 00 00 00 00 00 00 01 00 00 00 > d0: 86 21 00 00 02 1f 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 c0 01 0c 04 14 33 22 11 00 00 00 67 45 > f0: 00 00 40 00 00 00 00 00 47 0f 00 00 00 00 00 02 > > 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 04) (prog-if 80 [Master]) > Subsystem: Dell Unknown device 00d8 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] > Region 4: I/O ports at ffa0 [size=16] > Kernel driver in use: ata_piix > 00: 86 80 4b 24 05 00 80 02 04 80 01 01 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: a1 ff 00 00 00 00 00 00 00 00 00 00 28 10 d8 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 07 e3 03 e3 00 00 00 00 05 00 01 02 00 00 00 00 > 50: 00 00 00 00 50 10 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 > > 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04) (prog-if 00 [UHCI]) > Subsystem: Dell Unknown device 00d8 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin D routed to IRQ 17 > Region 4: I/O ports at ff80 [size=32] > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 42 24 05 00 80 02 04 00 03 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 81 ff 00 00 00 00 00 00 00 00 00 00 28 10 d8 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 27 00 00 03 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 > > 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 04) > Subsystem: Dell Unknown device 00d8 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at bcd0 [size=16] > Kernel driver in use: i801_smbus > Kernel modules: i2c-i801 > 00: 86 80 43 24 01 00 80 02 04 00 05 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: d1 bc 00 00 00 00 00 00 00 00 00 00 28 10 d8 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 > > 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04) (prog-if 00 [UHCI]) > Subsystem: Dell Unknown device 00d8 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at ff60 [size=32] > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 44 24 05 00 80 02 04 00 03 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 61 ff 00 00 00 00 00 00 00 00 00 00 28 10 d8 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 04 03 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 27 00 00 03 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 > > 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 04) > Subsystem: Dell Unknown device 00d8 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 0: I/O ports at b800 [size=256] > Region 1: I/O ports at bc40 [size=64] > Kernel driver in use: Intel ICH > Kernel modules: snd-intel8x0 > 00: 86 80 45 24 05 00 80 02 04 00 01 04 00 00 00 00 > 10: 01 b8 00 00 41 bc 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 d8 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 > > 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (prog-if 00 [VGA controller]) > Subsystem: Hightech Information System Ltd. Unknown device 8500 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 255 (2000ns min), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at ec00 [size=256] > Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at ff800000 [disabled] [size=128K] > Capabilities: [58] AGP version 2.0 > Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4 > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel modules: fglrx, radeonfb > 00: 02 10 48 4e a7 01 b0 02 00 00 00 03 10 ff 80 00 > 10: 08 00 00 d8 01 ec 00 00 00 00 8f ff 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 87 17 00 85 > 30: 00 00 00 c1 58 00 00 00 00 00 00 00 0b 01 08 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 87 17 00 85 > 50: 01 00 02 06 00 00 00 00 02 50 20 00 17 02 00 4f > 60: 14 03 00 1f 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) > Subsystem: Hightech Information System Ltd. Unknown device 8501 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (2000ns min), Cache Line Size: 64 bytes > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Region 1: Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 02 10 68 4e 87 00 b0 02 00 00 80 03 10 40 00 00 > 10: 08 00 00 d0 00 00 8e ff 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 87 17 01 85 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 01 00 02 06 00 00 00 00 02 50 20 00 17 02 00 4f > 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 02:1f.0 PCI bridge: Intel Corporation 82806AA PCI64 Hub PCI Bridge (rev 03) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: ff600000-ff7fffff Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Kernel modules: shpchp > 00: 86 80 60 13 07 01 20 00 03 00 04 06 00 00 01 00 > 10: 00 00 00 00 00 00 00 00 02 03 03 40 d0 d0 a0 02 > 20: 60 ff 70 ff f0 ff 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 80 40: 00 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00 > > 03:00.0 PIC: Intel Corporation 82806AA PCI64 Hub Advanced Programmable Interrupt Controller (rev 01) (prog-if 20 [IO(X)-APIC]) > Subsystem: Intel Corporation 82806AA PCI64 Hub APIC > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Region 0: Memory at ff6ff000 (32-bit, non-prefetchable) [disabled] [size=4K] > 00: 86 80 61 11 00 00 00 00 01 20 00 08 00 00 80 00 > 10: 00 f0 6f ff 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 11 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 03:0e.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev 02) > Subsystem: Dell Unknown device 00d8 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > BIST result: 00 > Region 0: I/O ports at dc00 [disabled] [size=256] > Region 1: Memory at ff6fe000 (64-bit, non-prefetchable) [size=4K] > Expansion ROM at ff700000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: aic7xxx > 00: 05 90 8f 00 16 01 b0 02 02 00 00 01 10 40 00 80 > 10: 01 dc 00 00 04 e0 6f ff 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 d8 00 > 30: 00 00 70 ff dc 00 00 00 00 00 00 00 0b 01 28 19 > 40: 80 04 00 80 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 04:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) > Subsystem: Dell Unknown device 00d8 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: I/O ports at cc80 [size=128] > Region 1: Memory at ff3ffc00 (32-bit, non-prefetchable) [size=128] > Expansion ROM at ff300000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- > Kernel driver in use: 3c59x > Kernel modules: 3c59x > 00: b7 10 00 92 17 01 10 02 78 00 00 02 10 40 00 00 > 10: 81 cc 00 00 00 fc 3f ff 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 d8 00 > 30: 00 00 40 ff dc 00 00 00 00 00 00 00 04 01 0a 0a > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 fe > e0: 00 40 00 68 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 04:0f.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) > Subsystem: NEC Corporation Hama USB 2.0 CardBus > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at ff3fe000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > 00: 33 10 35 00 16 01 10 02 41 10 03 0c 10 40 80 00 > 10: 00 e0 3f ff 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 01 2a > 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 05 33 30 c4 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 04:0f.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) > Subsystem: NEC Corporation Hama USB 2.0 CardBus > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 20 > Region 0: Memory at ff3fd000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > 00: 33 10 35 00 16 01 10 02 41 10 03 0c 10 40 00 00 > 10: 00 d0 3f ff 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 01 2a > 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 04:0f.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI]) > Subsystem: Unknown device 1838:1074 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 128 bytes > Interrupt: pin C routed to IRQ 19 > Region 0: Memory at ff3ff800 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > 00: 33 10 e0 00 16 01 10 02 02 20 03 0c 20 40 00 00 > 10: 00 f8 3f ff 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 38 18 74 10 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 09 03 10 22 > 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 20 20 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 05 33 30 c4 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > Regards, > > Gabriel > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/