Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753256AbYCISc4 (ORCPT ); Sun, 9 Mar 2008 14:32:56 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751705AbYCISco (ORCPT ); Sun, 9 Mar 2008 14:32:44 -0400 Received: from poseidon.rz.tu-clausthal.de ([139.174.2.21]:57304 "EHLO poseidon.rz.tu-clausthal.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750963AbYCISch (ORCPT ); Sun, 9 Mar 2008 14:32:37 -0400 X-Greylist: delayed 593 seconds by postgrey-1.27 at vger.kernel.org; Sun, 09 Mar 2008 14:32:36 EDT From: Volker Armin Hemmann To: linux-kernel@vger.kernel.org Subject: 2.6.24.X: SATA/AHCI related boot delay. Date: Sun, 9 Mar 2008 19:22:32 +0100 User-Agent: KMail/1.9.9 Cc: linux-ide@vger.kernel.org MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_prC1HU46IH2JXNA" Message-Id: <200803091922.33083.volker.armin.hemmann@tu-clausthal.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 86453 Lines: 2685 --Boundary-00=_prC1HU46IH2JXNA Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, I have an Alive -NF5-esata2+. AM2 board with dual core AMD64 cpu. Problem exists with latest bios 1.90 and its predecessor 1.80. This board with nforce 520 chipset (MCP65) has three possible settings for = the=20 sata controller: non-raid raid ahci. My default is non-raid. With 2.6.24 based kernels I get this on cold boot: [ 49.176044] Driver 'sd' needs updating - please use bus_type methods [ 49.176117] ahci 0000:00:0a.0: version 3.0 [ 49.176291] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 49.176335] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23= =20 (level, low) -> IRQ 23 [ 50.176871] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x= f=20 impl IDE mode [ 50.176922] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 50.176962] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 50.177163] scsi0 : ahci [ 50.177259] scsi1 : ahci [ 50.177325] scsi2 : ahci [ 50.177392] scsi3 : ahci [ 50.177480] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc10= 0=20 irq 315 [ 50.177528] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc18= 0=20 irq 315 [ 50.177575] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc20= 0=20 irq 315 [ 50.177623] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc28= 0=20 irq 315 [ 50.808824] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 80.743754] ata1.00: qc timeout (cmd 0xec) [ 80.743792] ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4) [ 80.743831] ata1: failed to recover some devices, retrying in 5 secs [ 86.368194] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 86.368803] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 86.368846] ata1.00: 312581808 sectors, multi 16: LBA48 [ 86.369491] ata1.00: configured for UDMA/133 [ 87.000153] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 87.020703] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 87.020742] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 87.022737] ata2.00: configured for UDMA/133 [ 87.339415] ata3: SATA link down (SStatus 0 SControl 300) [ 87.658721] ata4: SATA link down (SStatus 0 SControl 300) [ 87.658810] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10= =2E0=20 PQ: 0 ANSI: 5 [ 87.658917] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 87.658962] sd 0:0:0:0: [sda] Write Protect is off [ 87.659000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 87.659008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 87.659078] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 87.659121] sd 0:0:0:0: [sda] Write Protect is off [ 87.659159] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 87.659166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 87.659215] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 87.696698] sd 0:0:0:0: [sda] Attached SCSI disk [ 87.696832] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR= 10=20 PQ: 0 ANSI: 5 [ 87.696940] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8=20 MB) [ 87.696985] sd 1:0:0:0: [sdb] Write Protect is off [ 87.697022] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 87.697031] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 87.697101] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8=20 MB) [ 87.697144] sd 1:0:0:0: [sdb] Write Protect is off [ 87.697182] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 87.697189] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 87.697238] sdb: sdb1 sdb2 [ 87.720300] sd 1:0:0:0: [sdb] Attached SCSI disk =2D------------------------------------------------------------------------= =2D------------- and this on reboots: 30.984720] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf= =20 impl IDE mode [ 30.984771] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 30.984811] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 30.985012] scsi0 : ahci [ 30.985108] scsi1 : ahci [ 30.985174] scsi2 : ahci [ 30.985241] scsi3 : ahci [ 30.985329] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc10= 0=20 irq 315 [ 30.985377] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc18= 0=20 irq 315 [ 30.985425] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc20= 0=20 irq 315 [ 30.985472] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc28= 0=20 irq 315 [ 36.619135] ata1: port is slow to respond, please be patient (Status 0xd= 0) [ 40.982984] ata1: softreset failed (device not ready) [ 41.614947] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 41.615582] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 41.615625] ata1.00: 312581808 sectors, multi 16: LBA48 [ 41.616251] ata1.00: configured for UDMA/133 [ 42.246907] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 42.250073] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 42.250113] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 42.252112] ata2.00: configured for UDMA/133 [ 42.569539] ata3: SATA link down (SStatus 0 SControl 300) [ 42.888845] ata4: SATA link down (SStatus 0 SControl 300) [ 42.888934] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10= =2E0=20 PQ: 0 ANSI: 5 [ 42.889041] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 42.889086] sd 0:0:0:0: [sda] Write Protect is off [ 42.889124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.889132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 42.889202] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 42.889246] sd 0:0:0:0: [sda] Write Protect is off [ 42.889284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.889291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 42.889340] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 42.925936] sd 0:0:0:0: [sda] Attached SCSI disk [ 42.926071] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR= 10=20 PQ: 0 ANSI: 5 [ 42.926180] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8=20 MB) [ 42.926224] sd 1:0:0:0: [sdb] Write Protect is off [ 42.926262] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 42.926271] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 42.926346] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8=20 MB) [ 42.926389] sd 1:0:0:0: [sdb] Write Protect is off [ 42.926427] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 42.926434] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 42.926484] sdb: sdb1 sdb2 [ 42.955833] sd 1:0:0:0: [sdb] Attached SCSI disk =2D------------------------------------------------------------------------= =2D-------------- with 2.6.23.11 it looks like this: [ 90.956853] ide: Assuming 33MHz system bus speed for PIO modes; override= =20 with idebus=3Dxx [ 90.957166] NFORCE-MCP65: IDE controller at PCI slot 0000:00:09.0 [ 90.957335] NFORCE-MCP65: chipset revision 161 [ 90.957494] NFORCE-MCP65: not 100% native mode: will probe irqs later [ 90.957658] NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller [ 90.957820] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,=20 hdb:pio [ 90.958166] Probing IDE interface ide0... [ 91.246150] hda: SAMSUNG SP1213N, ATA DISK drive [ 91.888005] hda: selected mode 0x45 [ 91.888070] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 91.890652] hda: max request size: 512KiB [ 91.890861] hda: 234493056 sectors (120060 MB) w/8192KiB Cache,=20 CHS=3D16383/255/63, UDMA(100) [ 91.891601] hda: cache flushes supported [ 91.891777] hda: hda1 hda2 hda3 < hda5 hda6 hda7 > [ 91.931121] ahci 0000:00:0a.0: version 2.3 [ 91.931299] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 91.931465] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23= =20 (level, low) -> IRQ 23 [ 92.935591] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x= f=20 impl IDE mode [ 92.935888] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 92.936049] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 92.936263] scsi0 : ahci [ 92.936486] scsi1 : ahci [ 92.936677] scsi2 : ahci [ 92.936867] scsi3 : ahci [ 92.937048] ata1: SATA max UDMA/133 cmd 0xffffc20000020100 ctl=20 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 92.937342] ata2: SATA max UDMA/133 cmd 0xffffc20000020180 ctl=20 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 92.937636] ata3: SATA max UDMA/133 cmd 0xffffc20000020200 ctl=20 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 92.937930] ata4: SATA max UDMA/133 cmd 0xffffc20000020280 ctl=20 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 93.411080] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 93.411883] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 93.412045] ata1.00: 312581808 sectors, multi 16: LBA48 [ 93.412797] ata1.00: configured for UDMA/133 [ 93.727032] ata2: SATA link down (SStatus 0 SControl 300) [ 94.042987] ata3: SATA link down (SStatus 0 SControl 300) [ 94.358941] ata4: SATA link down (SStatus 0 SControl 300) [ 94.359249] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10= =2E0=20 PQ: 0 ANSI: 5 [ 94.359599] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 94.359765] sd 0:0:0:0: [sda] Write Protect is off [ 94.359925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 94.359933] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 94.360249] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 94.360414] sd 0:0:0:0: [sda] Write Protect is off [ 94.360573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 94.360581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 94.360873] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 94.402906] sd 0:0:0:0: [sda] Attached SCSI disk [ 94.403107] sd 0:0:0:0: Attached scsi generic sg0 type 0 =2D------------------------------------------------------------------------= =2D------------- I removed the pata-disk and the drivers some days ago - but that has had no= =20 influence on the problem. The delay was there with the pata-drive and drive= rs=20 too. There are some changes in the config - but even with the 2.6.3.11 conf= ig=20 on a 2.6.24 and make oldconfig showed the delays. If I change from 'non raid' to AHCI (because the handbook says that is the = way=20 to get NCQ working) boot hangs for looong time and no harddisks are found: (dmesg from systemrescuecd 1.0) ahci 0000:00:0a.0: version 3.0 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -= >=20 IRQ 18 ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio=20 PCI: Setting latency timer of device 0000:00:0a.0 to 64 scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 218 ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 218 ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 218 ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 218 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 00(40) scsi_scan_2 used greatest stack depth: 2868 bytes left ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=3D0x4) ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=3D0x4) ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=3D0x4) ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:09.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:09.0 to 64 scsi7 : pata_amd scsi8 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 I tried systemrescuecd with the 'noapic' option - same result. Long hangs, = no=20 disks found. lspci 00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1) 00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1) 00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) 00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) 00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) 00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1) 00:0b.0 PCI bridge: nVidia Corporation Unknown device 045b (rev a1) 00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) 00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) 00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]=20 HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]=20 Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRA= M=20 Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]=20 Miscellaneous Control 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B = PCI=20 Express Gigabit Ethernet controller (rev 01) 02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01) 02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value 04:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (= rev=20 a1) dmesg [ 0.000000] Linux version 2.6.24.2reiser4 (root@energy) (gcc version 4.2= =2E3=20 (Gentoo 4.2.3 p1.0)) #6 SMP Tue Mar 4 17:28:59 CET 2008 [ 0.000000] Command line: root=3D/dev/sda3 nmi_watchdog=3D0 console=3Dtt= y6 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 u= sed [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of = 256=20 used [ 0.000000] end_pfn_map =3D 1245184 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT = =20 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT = =20 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL= =20 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT = =20 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT = =20 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT = =20 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT = =20 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD = =20 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 u= sed [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of = 256=20 used [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 856 pages reserved [ 0.000000] DMA zone: 3087 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -= =20 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -= =20 00000000000e6000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 -= =20 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 -= =20 00000000cffc0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 -= =20 00000000cfff0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 -= =20 00000000d0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 -= =20 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 -= =20 00000000fec01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 -= =20 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 -= =20 00000000fef00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 -= =20 00000000ff380000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff380000 -= =20 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap:=20 d0000000:2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 31408 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l=20 pages: 1030519 [ 0.000000] Kernel command line: root=3D/dev/sda3 nmi_watchdog=3D0 conso= le=3Dtty6 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 48.747446] Marking TSC unstable due to TSCs unsynchronized [ 48.747447] time.c: Detected 3013.888 MHz processor. [ 48.751279] Console: colour VGA+ 80x25 [ 48.751281] console [tty6] enabled [ 48.755890] Dentry cache hash table entries: 524288 (order: 10, 4194304= =20 bytes) [ 48.758116] Inode-cache hash table entries: 262144 (order: 9, 2097152=20 bytes) [ 48.758884] Checking aperture... [ 48.758922] CPU 0: aperture @ ecc8000000 size 32 MB [ 48.758959] Aperture too small (32 MB) [ 48.764827] No AGP bridge found [ 48.764863] Your BIOS doesn't leave a aperture memory hole [ 48.764901] Please enable the IOMMU option in the BIOS setup [ 48.764939] This costs you 64 MB of RAM [ 48.790106] Mapping aperture over 65536 KB of RAM @ 8000000 [ 48.813687] Memory: 4049936k/4980736k available (2204k kernel code, 1434= 40k=20 reserved, 681k data, 172k init) [ 48.813756] SLUB: Genslabs=3D11, HWalign=3D64, Order=3D0-1, MinObjects= =3D4, CPUs=3D2,=20 Nodes=3D1 [ 48.893771] Calibrating delay using timer specific routine.. 6034.65=20 BogoMIPS (lpj=3D10053840) [ 48.893864] Mount-cache hash table entries: 256 [ 48.893972] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64=20 bytes/line) [ 48.894012] CPU: L2 Cache: 1024K (64 bytes/line) [ 48.894050] CPU: Physical Processor ID: 0 [ 48.894086] CPU: Processor Core ID: 0 [ 48.894139] SMP alternatives: switching to UP code [ 48.894504] ACPI: Core revision 20070126 [ 48.929680] Using local APIC timer interrupts. [ 48.962824] APIC timer calibration result 12557873 [ 48.962826] Detected 12.557 MHz APIC timer. [ 48.962910] SMP alternatives: switching to SMP code [ 48.963141] Booting processor 1/2 APIC 0x1 [ 48.973258] Initializing CPU#1 [ 49.056020] Calibrating delay using timer specific routine.. 6030.92=20 BogoMIPS (lpj=3D10046281) [ 49.056024] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64=20 bytes/line) [ 49.056026] CPU: L2 Cache: 1024K (64 bytes/line) [ 49.056027] CPU: Physical Processor ID: 0 [ 49.056028] CPU: Processor Core ID: 1 [ 49.056109] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 49.056167] Brought up 2 CPUs [ 49.056624] net_namespace: 120 bytes [ 49.056866] NET: Registered protocol family 16 [ 49.056978] ACPI: bus type pci registered [ 49.057060] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 49.057099] PCI: Not using MMCONFIG. [ 49.057135] PCI: Using configuration type 1 [ 49.059381] ACPI: EC: Look up EC in DSDT [ 49.062825] ACPI: Interpreter enabled [ 49.062863] ACPI: (supports S0 S1 S3 S4 S5) [ 49.063033] ACPI: Using IOAPIC for interrupt routing [ 49.063242] Error attaching device data [ 49.063281] Error attaching device data [ 49.063320] Error attaching device data [ 49.063359] Error attaching device data [ 49.068281] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 49.068803] PCI: Transparent bridge - 0000:00:08.0 [ 49.069095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 49.069228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 49.069326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 49.069382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 49.069438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 49.069494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 49.073455] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 49.073793] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 49.074127] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,=20 disabled. [ 49.074487] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,=20 disabled. [ 49.074847] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0,=20 disabled. [ 49.075207] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 49.075541] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0,=20 disabled. [ 49.075902] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 49.076239] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 49.076573] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0,=20 disabled. [ 49.076933] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 49.077267] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,=20 disabled. [ 49.077628] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0,=20 disabled. [ 49.077988] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 49.078322] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0,=20 disabled. [ 49.078683] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 49.079017] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0,=20 disabled. [ 49.079415] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,=20 disabled. [ 49.079776] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0,=20 disabled. [ 49.080137] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0,=20 disabled. [ 49.080456] Linux Plug and Play Support v0.97 (c) Adam Belay [ 49.080509] pnp: PnP ACPI init [ 49.080548] ACPI: bus type pnp registered [ 49.083088] pnp: PnP ACPI: found 13 devices [ 49.083125] ACPI: ACPI bus type pnp unregistered [ 49.083244] SCSI subsystem initialized [ 49.083300] libata version 3.00 loaded. [ 49.083353] usbcore: registered new interface driver usbfs [ 49.083407] usbcore: registered new interface driver hub [ 49.083464] usbcore: registered new device driver usb [ 49.083546] PCI: Using ACPI for IRQ routing [ 49.083584] PCI: If a device doesn't work, try "pci=3Drouteirq". If it= =20 helps, post a report [ 49.092621] PCI-DMA: Disabling AGP. [ 49.093359] PCI-DMA: aperture base @ 8000000 size 65536 KB [ 49.093401] PCI-DMA: using GART IOMMU. [ 49.093441] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 49.093600] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 49.093739] hpet0: 3 32-bit timers, 25000000 Hz [ 49.095903] Time: hpet clocksource has been installed. [ 49.095951] Switched to high resolution mode on CPU 0 [ 49.096038] Switched to high resolution mode on CPU 1 [ 49.102635] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 49.102675] system 00:05: ioport range 0x800-0x80f has been reserved [ 49.102714] system 00:05: ioport range 0x2000-0x207f has been reserved [ 49.102754] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 49.106152] system 00:05: ioport range 0x2400-0x247f has been reserved [ 49.106192] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 49.106231] system 00:05: ioport range 0x2800-0x287f has been reserved [ 49.106270] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 49.106309] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [ 49.106349] system 00:05: ioport range 0x2c80-0x2cff has been reserved [ 49.106389] system 00:05: iomem range 0x0-0x0 could not be reserved [ 49.106428] system 00:05: iomem range 0xfee01000-0xfeefffff has been=20 reserved [ 49.106472] system 00:07: iomem range 0xfec00000-0xfec00fff could not be= =20 reserved [ 49.106520] system 00:07: iomem range 0xfee00000-0xfee00fff could not be= =20 reserved [ 49.106570] system 00:0a: ioport range 0x290-0x29f has been reserved [ 49.106613] system 00:0b: iomem range 0xe0000000-0xefffffff has been=20 reserved [ 49.106658] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 49.106698] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 49.106740] system 00:0c: iomem range 0xe0000-0xfffff could not be reser= ved [ 49.106780] system 00:0c: iomem range 0x100000-0xcfffffff could not be=20 reserved [ 49.106827] system 00:0c: iomem range 0xff380000-0xffffffff could not be= =20 reserved [ 49.107108] PCI: Bridge: 0000:00:08.0 [ 49.107145] IO window: d000-dfff [ 49.107182] MEM window: f9f00000-f9ffffff [ 49.107219] PREFETCH window: disabled. [ 49.107257] PCI: Bridge: 0000:00:0b.0 [ 49.107293] IO window: c000-cfff [ 49.107330] MEM window: f9e00000-f9efffff [ 49.107367] PREFETCH window: disabled. [ 49.107404] PCI: Bridge: 0000:00:0c.0 [ 49.107440] IO window: disabled. [ 49.107476] MEM window: disabled. [ 49.107512] PREFETCH window: disabled. [ 49.107549] PCI: Bridge: 0000:00:0d.0 [ 49.107585] IO window: e000-efff [ 49.107622] MEM window: fa000000-febfffff [ 49.107659] PREFETCH window: d0000000-dfffffff [ 49.107697] PCI: Bridge: 0000:00:0e.0 [ 49.107733] IO window: disabled. [ 49.107769] MEM window: disabled. [ 49.107805] PREFETCH window: disabled. [ 49.107848] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 49.107857] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 49.107862] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 49.107866] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 49.107871] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 49.107877] NET: Registered protocol family 2 [ 49.139202] IP route cache hash table entries: 131072 (order: 8, 1048576= =20 bytes) [ 49.139805] TCP established hash table entries: 262144 (order: 10, 41943= 04=20 bytes) [ 49.141228] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 49.141693] TCP: Hash tables configured (established 262144 bind 65536) [ 49.141733] TCP reno registered [ 49.149967] Loading Reiser4. See www.namesys.com for a description of=20 Reiser4. [ 49.150075] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma= jor=20 254) [ 49.150123] io scheduler noop registered [ 49.150161] io scheduler cfq registered (default) [ 49.150855] Boot video device is 0000:04:00.0 [ 49.150958] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 49.150975] assign_interrupt_mode Found MSI capability [ 49.151029] Allocate Port Service[0000:00:0b.0:pcie00] [ 49.151071] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 49.151087] assign_interrupt_mode Found MSI capability [ 49.151135] Allocate Port Service[0000:00:0c.0:pcie00] [ 49.151172] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 49.151187] assign_interrupt_mode Found MSI capability [ 49.151235] Allocate Port Service[0000:00:0d.0:pcie00] [ 49.151274] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 49.151290] assign_interrupt_mode Found MSI capability [ 49.151338] Allocate Port Service[0000:00:0e.0:pcie00] [ 49.151515] input: Power Button (FF) as /class/input/input0 [ 49.151553] ACPI: Power Button (FF) [PWRF] [ 49.151638] input: Power Button (CM) as /class/input/input1 [ 49.151676] ACPI: Power Button (CM) [PWRB] [ 49.151812] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processo= r=20 Device is not present [20070126] [ 49.151917] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processo= r=20 Device is not present [20070126] [ 49.175824] Real Time Clock Driver v1.12ac [ 49.175942] hpet_resources: 0xfed00000 is busy [ 49.175960] Linux agpgart interface v0.102 [ 49.176044] Driver 'sd' needs updating - please use bus_type methods [ 49.176117] ahci 0000:00:0a.0: version 3.0 [ 49.176291] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 49.176335] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23= =20 (level, low) -> IRQ 23 [ 50.176871] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x= f=20 impl IDE mode [ 50.176922] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 50.176962] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 50.177163] scsi0 : ahci [ 50.177259] scsi1 : ahci [ 50.177325] scsi2 : ahci [ 50.177392] scsi3 : ahci [ 50.177480] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc10= 0=20 irq 315 [ 50.177528] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc18= 0=20 irq 315 [ 50.177575] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc20= 0=20 irq 315 [ 50.177623] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc28= 0=20 irq 315 [ 50.808824] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 80.743754] ata1.00: qc timeout (cmd 0xec) [ 80.743792] ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4) [ 80.743831] ata1: failed to recover some devices, retrying in 5 secs [ 86.368194] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 86.368803] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 86.368846] ata1.00: 312581808 sectors, multi 16: LBA48 [ 86.369491] ata1.00: configured for UDMA/133 [ 87.000153] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 87.020703] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 87.020742] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 87.022737] ata2.00: configured for UDMA/133 [ 87.339415] ata3: SATA link down (SStatus 0 SControl 300) [ 87.658721] ata4: SATA link down (SStatus 0 SControl 300) [ 87.658810] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10= =2E0=20 PQ: 0 ANSI: 5 [ 87.658917] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 87.658962] sd 0:0:0:0: [sda] Write Protect is off [ 87.659000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 87.659008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 87.659078] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 87.659121] sd 0:0:0:0: [sda] Write Protect is off [ 87.659159] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 87.659166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 87.659215] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 87.696698] sd 0:0:0:0: [sda] Attached SCSI disk [ 87.696832] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR= 10=20 PQ: 0 ANSI: 5 [ 87.696940] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8=20 MB) [ 87.696985] sd 1:0:0:0: [sdb] Write Protect is off [ 87.697022] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 87.697031] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 87.697101] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (50010= 8=20 MB) [ 87.697144] sd 1:0:0:0: [sdb] Write Protect is off [ 87.697182] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 87.697189] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 87.697238] sdb: sdb1 sdb2 [ 87.720300] sd 1:0:0:0: [sdb] Attached SCSI disk [ 87.720614] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 87.720659] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22= =20 (level, low) -> IRQ 22 [ 87.720952] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 87.720956] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 87.721072] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus= =20 number 1 [ 87.721146] ehci_hcd 0000:00:02.1: debug port 1 [ 87.721185] PCI: cache line size of 64 is not supported by device=20 0000:00:02.1 [ 87.721193] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [ 87.729429] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10= =20 Dec 2004 [ 87.729591] usb usb1: configuration #1 chosen from 1 choice [ 87.729657] hub 1-0:1.0: USB hub found [ 87.729698] hub 1-0:1.0: 10 ports detected [ 87.831809] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x6= 4=20 irq 1,12 [ 87.834655] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 87.834694] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 87.890390] input: AT Translated Set 2 keyboard as /class/input/input2 [ 88.057853] usb 1-3: new high speed USB device using ehci_hcd and addres= s 2 [ 88.182269] usb 1-3: configuration #1 chosen from 1 choice [ 88.182606] hub 1-3:1.0: USB hub found [ 88.182959] hub 1-3:1.0: 4 ports detected [ 88.510234] usb 1-5: new high speed USB device using ehci_hcd and addres= s 3 [ 88.639370] usb 1-5: configuration #1 chosen from 1 choice [ 88.826522] usb 1-3.1: new low speed USB device using ehci_hcd and addre= ss=20 4 [ 88.928973] usb 1-3.1: configuration #1 chosen from 1 choice [ 89.122483] usb 1-3.4: new high speed USB device using ehci_hcd and addr= ess=20 5 [ 89.195695] usb 1-3.4: device descriptor read/64, error -71 [ 89.371925] usb 1-3.4: device descriptor read/64, error -71 [ 89.541544] usb 1-3.4: new high speed USB device using ehci_hcd and addr= ess=20 6 [ 89.614755] usb 1-3.4: device descriptor read/64, error -71 [ 89.790985] usb 1-3.4: device descriptor read/64, error -71 [ 89.960730] usb 1-3.4: new high speed USB device using ehci_hcd and addr= ess=20 7 [ 90.366204] usb 1-3.4: device not accepting address 7, error -71 [ 90.432921] usb 1-3.4: new high speed USB device using ehci_hcd and addr= ess=20 8 [ 90.838511] usb 1-3.4: device not accepting address 8, error -71 [ 90.843129] input: Logitech USB Receiver as /class/input/input3 [ 90.859316] input: USB HID v1.11 Mouse [Logitech USB Receiver] on=20 usb-0000:00:02.1-3.1 [ 90.865040] input: Logitech USB Receiver as /class/input/input4 [ 90.885926] input: USB HID v1.11 Device [Logitech USB Receiver] on=20 usb-0000:00:02.1-3.1 [ 90.886029] usbcore: registered new interface driver usbhid [ 90.886068] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 90.886113] TCP cubic registered [ 90.886152] NET: Registered protocol family 1 [ 90.886209] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processo= r=20 6000+ processors (2 cpu cores) (version 2.20.00) [ 90.886262] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 90.886301] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 90.886339] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 90.886378] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 90.886416] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 90.886454] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 90.889850] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 90.889889] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 90.900783] ReiserFS: sda3: found reiserfs format "3.6" with standard=20 journal [ 90.900825] ReiserFS: sda3: using ordered data mode [ 90.910333] ReiserFS: sda3: journal params: device sda3, size 8192, jour= nal=20 first block 18, max trans len 1024, max batch 900, max commit age 30, max=20 trans age 30 [ 90.911226] ReiserFS: sda3: checking transaction log (sda3) [ 90.954640] ReiserFS: sda3: Using r5 hash to sort names [ 90.954690] VFS: Mounted root (reiserfs filesystem) readonly. [ 90.954740] Freeing unused kernel memory: 172k freed [ 91.040511] Clocksource tsc unstable (delta =3D -144182848 ns) [ 92.705141] ReiserFS: sda3: switching to journaled data mode [ 92.875659] r8169 Gigabit Ethernet driver 2.2LK loaded [ 92.875868] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 92.875873] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19= =20 (level, low) -> IRQ 19 [ 92.875881] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 92.876029] eth0: RTL8168b/8111b at 0xffffc20000172000, 00:19:66:47:f3:c= b,=20 XID 38000000 IRQ 314 [ 93.020810] reiser4: sdb2: found disk format 4.0.0. [ 101.258255] reiser4: sda6: found disk format 4.0.0. [ 101.716150] reiser4: sdb1: found disk format 4.0.0. [ 102.062717] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1=20 across:1951888k [ 103.594035] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 103.594041] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18= =20 (level, low) -> IRQ 18 [ 103.595129] Audigy2 value: Special config. [ 105.122084] w83627ehf: Found W83627EHG chip at 0x290 [ 106.260422] r8169: eth0: link up [ 106.260427] r8169: eth0: link up [ 106.747221] NET: Registered protocol family 17 [ 110.231622] nvidia: module license 'NVIDIA' taints kernel. [ 110.403019] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17 [ 110.403027] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17= =20 (level, low) -> IRQ 17 [ 110.403032] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 110.403117] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 171.06 Wed = =46eb=20 20 09:02:26 PST 2008 [ 299.415650] usb 1-3.2: new full speed USB device using ehci_hcd and addr= ess=20 9 [ 299.483823] usb 1-3.2: configuration #1 chosen from 2 choices [ 299.509674] Initializing USB Mass Storage driver... [ 299.509771] scsi4 : SCSI emulation for USB Mass Storage devices [ 299.509315] usb-storage: device found at 9 [ 299.509318] usb-storage: waiting for device to settle before scanning [ 299.509821] usbcore: registered new interface driver usb-storage [ 299.509823] USB Mass Storage support registered. [ 302.973619] scsi 4:0:0:0: Direct-Access Motorola Motorola Phone 2.= 31=20 PQ: 0 ANSI: 2 [ 303.092568] sd 4:0:0:0: [sdc] 979456 512-byte hardware sectors (501 MB) [ 303.100559] sd 4:0:0:0: [sdc] Write Protect is off [ 303.100563] sd 4:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [ 303.100574] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 303.130402] sd 4:0:0:0: [sdc] 979456 512-byte hardware sectors (501 MB) [ 303.138545] sd 4:0:0:0: [sdc] Write Protect is off [ 303.138548] sd 4:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [ 303.138550] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 303.138552] sdc: sdc1 [ 303.161436] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 303.161600] usb-storage: device scan complete [ 303.176188] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 303.176213] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 303.176238] sd 4:0:0:0: Attached scsi generic sg2 type 0 cat /proc/interrupts CPU0 CPU1 0: 56 1 IO-APIC-edge timer 1: 11 4589 IO-APIC-edge i8042 8: 0 1 IO-APIC-edge rtc 9: 0 1 IO-APIC-fasteoi acpi 12: 0 3 IO-APIC-edge i8042 17: 26 70891 IO-APIC-fasteoi nvidia 18: 0 0 IO-APIC-fasteoi EMU10K1 22: 49 30631 IO-APIC-fasteoi ehci_hcd:usb1 314: 9 4439 PCI-MSI-edge eth0 315: 32 27847 PCI-MSI-edge ahci NMI: 0 0 Non-maskable interrupts LOC: 105026 170031 Local timer interrupts RES: 27983 12360 Rescheduling interrupts CAL: 1902 237 function call interrupts TLB: 5129 4330 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 67 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping : 3 cpu MHz : 2000.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca= =20 cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdts= cp=20 lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_lega= cy bogomips : 4023.10 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 67 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping : 3 cpu MHz : 2000.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca= =20 cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdts= cp=20 lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_lega= cy bogomips : 4023.10 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc sh /usr/src/linux/scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux energy 2.6.24.2reiser4 #6 SMP Tue Mar 4 17:28:59 CET 2008 x86_64 AMD= =20 Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux Gnu C 4.2.3 Gnu make 3.81 binutils 2.18.50.0.4.20080208 util-linux 2.13.1 mount 2.13.1 module-init-tools 3.4 e2fsprogs 1.40.6 reiserfsprogs 3.6.19 reiser4progs 1.0.6 PPP 2.4.4 Linux C Library 2.7 Dynamic linker (ldd) 2.7 Procps 3.2.7 Net-tools 1.60 Kbd 1.13 Sh-utils 6.10 udev 118 Modules Loaded nls_iso8859_15 nls_cp850 vfat fat nls_base sg=20 usb_storage nvidia af_packet k8temp w83627ehf hwmon_vid hwmon i2c_core=20 snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi=20 snd_seq_midi_emul snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event= =20 snd_seq snd_emu10k1 snd_rawmidi firmware_class snd_ac97_codec ac97_bus=20 snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep snd= =20 soundcore r8169 If you want/need more information or want me to do something please ask me= =20 directly - I am not subscribed to any of the two lists. If I need to RTFM=20 please point me to the right FM. Gl=FCck Auf, Volker --Boundary-00=_prC1HU46IH2JXNA Content-Type: text/plain; charset="us-ascii"; name=".config" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=".config" # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24.2 # Tue Mar 4 17:20:19 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="reiser4" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set # CONFIG_FAIR_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_NUMA is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND_SMP_POSSIBLE=y CONFIG_SUSPEND=y CONFIG_HIBERNATION_SMP_POSSIBLE=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # # CONFIG_X86_ACPI_CPUFREQ is not set CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # CONFIG_CPU_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=m CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m # # Bluetooth device drivers # # CONFIG_BT_HCIUSB is not set # CONFIG_BT_HCIBTUSB is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_LL=y # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=16 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=m # CONFIG_R8169_NAPI is not set CONFIG_R8169_VLAN=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=m CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set CONFIG_FIX_EARLYCON_MEM=y # # Non-8250 serial port support # # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=m CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=m # CONFIG_I2C_AMD756_S4882 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_NFORCE2=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set CONFIG_SENSORS_K8TEMP=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set CONFIG_SENSORS_W83627EHF=m # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_WATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_TVP5150=m # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_CX23885 is not set # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_CAFE_CCIC is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_VIDEO_PVRUSB2 is not set CONFIG_VIDEO_EM28XX=m # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set # CONFIG_USB_ET61X251 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # CONFIG_USB_W9968CF is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_ZR364XX is not set # CONFIG_RADIO_ADAPTERS is not set CONFIG_DVB_CORE=m CONFIG_DVB_CORE_ATTACH=y CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # # CONFIG_DVB_AV7110 is not set # CONFIG_DVB_BUDGET is not set # CONFIG_DVB_BUDGET_CI is not set # CONFIG_DVB_BUDGET_AV is not set # # Supported USB Adapters # # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set # # Supported FlexCopII (B2C2) Adapters # # CONFIG_DVB_B2C2_FLEXCOP is not set # # Supported BT878 Adapters # # # Supported Pluto2 Adapters # # CONFIG_DVB_PLUTO2 is not set # # Supported DVB Frontends # # # Customise DVB Frontends # # CONFIG_DVB_FE_CUSTOMISE is not set # # DVB-S (satellite) frontends # # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set # CONFIG_DVB_TDA10086 is not set # # DVB-T (terrestrial) frontends # # CONFIG_DVB_SP8870 is not set # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set CONFIG_DVB_MT352=m CONFIG_DVB_ZL10353=m # CONFIG_DVB_DIB3000MB is not set # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set # # DVB-C (cable) frontends # # CONFIG_DVB_VES1820 is not set # CONFIG_DVB_TDA10021 is not set # CONFIG_DVB_TDA10023 is not set # CONFIG_DVB_STV0297 is not set # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # # CONFIG_DVB_NXT200X is not set # CONFIG_DVB_OR51211 is not set # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set # # Tuners/PLL support # # CONFIG_DVB_PLL is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TDA827X is not set # CONFIG_DVB_TUNER_QT1010 is not set # CONFIG_DVB_TUNER_MT2060 is not set # CONFIG_DVB_TUNER_MT2266 is not set # CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set # # Miscellaneous devices # # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6421 is not set # CONFIG_DVB_TUA6100 is not set CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_TUNER_CUSTOMIZE=y CONFIG_TUNER_MT20XX=m CONFIG_TUNER_TDA8290=m CONFIG_TUNER_TEA5761=m CONFIG_TUNER_TEA5767=m CONFIG_TUNER_SIMPLE=m CONFIG_VIDEO_IR_I2C=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m # CONFIG_SND_PCM_OSS_PLUGINS is not set CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=m # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 # # USB devices # CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # # System on Chip audio support # # CONFIG_SND_SOC is not set # # SoC Audio support for SuperH # # # Open Sound System # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_MON is not set # # USB port drivers # # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set CONFIG_VIRTUALIZATION=y CONFIG_KVM=m # CONFIG_KVM_INTEL is not set CONFIG_KVM_AMD=m # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set CONFIG_REISER4_FS=y # CONFIG_REISER4_DEBUG is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=850 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-15" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # CONFIG_INSTRUMENTATION is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_CBC is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y --Boundary-00=_prC1HU46IH2JXNA-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/