Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965743AbYCSXCm (ORCPT ); Wed, 19 Mar 2008 19:02:42 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932352AbYCSV2r (ORCPT ); Wed, 19 Mar 2008 17:28:47 -0400 Received: from ogre.sisk.pl ([217.79.144.158]:57967 "EHLO ogre.sisk.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755288AbYCSV2n convert rfc822-to-8bit (ORCPT ); Wed, 19 Mar 2008 17:28:43 -0400 From: "Rafael J. Wysocki" To: Pavel Machek Subject: Re: bluetooth still corrupts memory in 2.6.25-rc6 Date: Wed, 19 Mar 2008 22:28:09 +0100 User-Agent: KMail/1.9.6 (enterprise 20070904.708012) Cc: marcel@holtmann.org, maxk@qualcomm.com, bluez-devel@lists.sourceforge.net, kernel list References: <20080319082115.GA14543@elf.ucw.cz> In-Reply-To: <20080319082115.GA14543@elf.ucw.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-Id: <200803192228.09834.rjw@sisk.pl> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 50530 Lines: 1032 On Wednesday, 19 of March 2008, Pavel Machek wrote: > > ...just leave ppp-over-cellphone-over-bluetooth running, and do > s2ram... > > Linux version 2.6.25-rc6 (pavel@amd) (gcc version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #186 SMP Wed Mar 19 00:46:05 CET 2008 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) > BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) > BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data) > BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS) > BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) > 1142MB HIGHMEM available. > 896MB LOWMEM available. > Scan SMP from c0000000 for 1024 bytes. > Scan SMP from c009fc00 for 1024 bytes. > Scan SMP from c00f0000 for 65536 bytes. > found SMP MP-table at [c00f67f0] 000f67f0 > Entering add_active_range(0, 0, 521936) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 521936 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 521936 > On node 0 totalpages: 521936 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 2285 pages used for memmap > HighMem zone: 290275 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > DMI present. > ACPI: RSDP 000F67C0, 0024 (r2 LENOVO) > ACPI: XSDT 7F6D191C, 0084 (r1 LENOVO TP-7B 2140 LTP 0) > ACPI: FACP 7F6D1A00, 00F4 (r3 LENOVO TP-7B 2140 LNVO 1) > ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] > ACPI: DSDT 7F6D1D90, CFB9 (r1 LENOVO TP-7B 2140 MSFT 100000E) > ACPI: FACS 7F6F4000, 0040 > ACPI: SSDT 7F6D1BB4, 01DC (r1 LENOVO TP-7B 2140 MSFT 100000E) > ACPI: ECDT 7F6DED49, 0052 (r1 LENOVO TP-7B 2140 LNVO 1) > ACPI: TCPA 7F6DED9B, 0032 (r2 LENOVO TP-7B 2140 LNVO 1) > ACPI: APIC 7F6DEDCD, 0068 (r1 LENOVO TP-7B 2140 LNVO 1) > ACPI: MCFG 7F6DEE35, 003C (r1 LENOVO TP-7B 2140 LNVO 1) > ACPI: HPET 7F6DEE71, 0038 (r1 LENOVO TP-7B 2140 LNVO 1) > ACPI: BOOT 7F6DEFD8, 0028 (r1 LENOVO TP-7B 2140 LTP 1) > ACPI: SSDT 7F6F2645, 025F (r1 LENOVO TP-7B 2140 INTL 20050513) > ACPI: SSDT 7F6F28A4, 00A6 (r1 LENOVO TP-7B 2140 INTL 20050513) > ACPI: SSDT 7F6F294A, 04F7 (r1 LENOVO TP-7B 2140 INTL 20050513) > ACPI: SSDT 7F6F2E41, 01D8 (r1 LENOVO TP-7B 2140 INTL 20050513) > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 6:14 APIC version 20 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 6:14 APIC version 20 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 > PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 > PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 > PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517859 > Kernel command line: root=/dev/sda4 resume=/dev/sda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps vga=791 init=/tmp/swsusp-init acpi_sleep=s3_bios,s3_mode no_console_suspend > Unknown boot option `psmouse.psmouse_proto=imps': ignoring > mapped APIC to ffffb000 (fee00000) > mapped IOAPIC to ffffa000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 1828.808 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 2061008k/2087744k available (5277k kernel code, 25612k reserved, 2021k data, 324k init, 1170240k highmem) > virtual kernel memory layout: > fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc092c000 - 0xc097d000 ( 324 kB) > .data : 0xc0727446 - 0xc09208a8 (2021 kB) > .text : 0xc0200000 - 0xc0727446 (5277 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > CPA: page pool initialized 1 of 1 pages preallocated > hpet clockevent registered > Calibrating delay using timer specific routine.. 3661.67 BogoMIPS (lpj=7323359) > Mount-cache hash table entries: 512 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > using mwait in idle threads. > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > ACPI: Core revision 20070126 > Parsing all Control Methods: > Table [DSDT](id 0001) - 1592 Objects with 69 Devices 429 Methods 28 Regions > Parsing all Control Methods: > Table [SSDT](id 0002) - 11 Objects with 0 Devices 7 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0006) - 14 Objects with 1 Devices 2 Methods 0 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired > evxfevnt-0091 [00] enable : Transition to ACPI mode successful > CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 > Booting processor 1/1 ip 6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3657.55 BogoMIPS (lpj=7315103) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 > Total of 2 processors activated (7319.23 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > checking TSC synchronization [CPU#0 -> CPU#1]: > Measured 580118 cycles TSC warp between CPUs, turning off TSC clock. > Marking TSC unstable due to: check_tsc_sync_source failed. > Brought up 2 CPUs > CPU0 attaching sched-domain: > domain 0: span 3 > groups: 1 2 > CPU1 attaching sched-domain: > domain 0: span 3 > groups: 2 1 > net_namespace: 448 bytes > NET: Registered protocol family 16 > ACPI: ACPI Dock Station Driver > ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay > ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler > ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Is dependent on dock > > ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added > ACPI: bus type pci registered > PCI: Using MMCONFIG for extended config space > PCI: Using configuration type 1 > Setting up standard PCI resources > evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 > evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block > ACPI: EC: EC description table is found, configuring boot EC > Completing Region/Field/Buffer/Package initialization:............................................................................................................................................................................................................................................................. > Initialized 28/28 Regions 126/126 Fields 54/54 Buffers 45/56 Packages (1651 nodes) > Initializing Device/Processor/Thermal objects by executing _INI methods:...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode > .... > Executed 7 _INI methods requiring 2 _STA executions (examined 76 objects) > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 > ACPI: EC: driver started in poll mode > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) > ACPI: EC: non-query interrupt received, switching to interrupt mode > ACPI: Power Resource [PUBS] (on) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnpacpi: exceeded the max number of mem resources: 12 > pnp: PnP ACPI: found 12 devices > ACPI: ACPI bus type pnp unregistered > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > irda_init() > NET: Registered protocol family 23 > Bluetooth: Core ver 2.11 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > ACPI: RTC can wake from S4 > Time: hpet clocksource has been installed. > system 00:00: iomem range 0x0-0x9ffff could not be reserved > system 00:00: iomem range 0xc0000-0xc3fff could not be reserved > system 00:00: iomem range 0xc4000-0xc7fff could not be reserved > system 00:00: iomem range 0xc8000-0xcbfff has been reserved > system 00:00: iomem range 0xcc000-0xcffff could not be reserved > system 00:00: iomem range 0xd0000-0xd3fff could not be reserved > system 00:00: iomem range 0x0-0x0 could not be reserved > system 00:00: iomem range 0x0-0x0 could not be reserved > system 00:00: iomem range 0xdc000-0xdffff has been reserved > system 00:00: iomem range 0xe0000-0xe3fff has been reserved > system 00:00: iomem range 0xe4000-0xe7fff has been reserved > system 00:00: iomem range 0xe8000-0xebfff has been reserved > system 00:02: ioport range 0x164e-0x164f has been reserved > system 00:02: ioport range 0x1000-0x107f has been reserved > system 00:02: ioport range 0x1180-0x11bf has been reserved > system 00:02: ioport range 0x800-0x80f has been reserved > system 00:02: ioport range 0x15e0-0x15ef has been reserved > system 00:02: ioport range 0x1600-0x165f could not be reserved > system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved > system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved > system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved > system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved > system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved > PCI: Bridge: 0000:00:1c.0 > IO window: 2000-2fff > MEM window: 0xee000000-0xee0fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: 3000-4fff > MEM window: 0xec000000-0xedffffff > PREFETCH window: 0x00000000e4000000-0x00000000e40fffff > PCI: Bridge: 0000:00:1c.2 > IO window: 5000-6fff > MEM window: 0xe8000000-0xe9ffffff > PREFETCH window: 0x00000000e4100000-0x00000000e41fffff > PCI: Bridge: 0000:00:1c.3 > IO window: 7000-8fff > MEM window: 0xea000000-0xebffffff > PREFETCH window: 0x00000000e4200000-0x00000000e42fffff > PCI: Bus 22, cardbus bridge: 0000:15:00.0 > IO window: 0x00009000-0x000090ff > IO window: 0x00009400-0x000094ff > PREFETCH window: 0xe0000000-0xe3ffffff > MEM window: 0x88000000-0x8bffffff > PCI: Bridge: 0000:00:1e.0 > IO window: 9000-cfff > MEM window: 0xe4300000-0xe7ffffff > PREFETCH window: 0x00000000e0000000-0x00000000e3ffffff > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > PCI: Setting latency timer of device 0000:00:1c.3 to 64 > PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > PCI: Setting latency timer of device 0000:15:00.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > Simple Boot Flag at 0x35 set to 0x1 > highmem bounce pool size: 64 pages > NTFS driver 2.1.29 [Flags: R/O DEBUG]. > JFFS2 version 2.2. (NAND) Š 2001-2006 Red Hat, Inc. > fuse init (API version 7.9) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > pci 0000:00:02.0: Boot video device > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed > vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 7872k > vesafb: mode is 1024x768x16, linelength=2048, pages=4 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 102x42 > fb0: VESA VGA frame buffer device > ACPI: AC Adapter [AC] (on-line) > ACPI: Battery Slot [BAT0] (battery present) > input: Power Button (FF) as /class/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Lid Switch as /class/input/input1 > ACPI: Lid Switch [LID] > input: Sleep Button (CM) as /class/input/input2 > ACPI: Sleep Button (CM) [SLPB] > ACPI: device:03 is registered as cooling_device0 > input: Video Bus as /class/input/input3 > ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > ACPI: SSDT 7F6F1D26, 0240 (r1 PmRef Cpu0Ist 100 INTL 20050513) > Parsing all Control Methods: > Table [SSDT](id 002B) - 6 Objects with 0 Devices 4 Methods 0 Regions > ACPI: SSDT 7F6F1FEB, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) > Parsing all Control Methods: > Table [SSDT](id 002C) - 13 Objects with 0 Devices 1 Methods 0 Regions > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: ACPI0007:00 is registered as cooling_device1 > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: SSDT 7F6F1C5E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) > Parsing all Control Methods: > Table [SSDT](id 0036) - 4 Objects with 0 Devices 4 Methods 0 Regions > ACPI: SSDT 7F6F1F66, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) > Parsing all Control Methods: > Table [SSDT](id 0037) - 1 Objects with 0 Devices 1 Methods 0 Regions > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: ACPI0007:01 is registered as cooling_device2 > ACPI: Processor [CPU1] (supports 8 throttling states) > ACPI: LNXTHERM:01 is registered as thermal_zone0 > ACPI: Thermal Zone [THM0] (57 C) > ACPI: LNXTHERM:02 is registered as thermal_zone1 > ACPI: Thermal Zone [THM1] (57 C) > lp: driver loaded but no devices found > Generic RTC Driver v1.07 > Non-volatile memory driver v1.2 > intel_rng: FWH not detected > cs5535_gpio: DIVIL not found > Linux agpgart interface v0.103 > agpgart: Detected an Intel 945GM Chipset. > agpgart: Detected 7932K stolen memory. > agpgart: AGP aperture is 256M @ 0xd0000000 > [drm] Initialized drm 1.1.0 20060810 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > [drm] Initialized i915 1.6.0 20060119 on minor 0 > intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets > intelfb: Version 0.9.4 > intelfb: Cannot reserve FB region. > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A > floppy0: no floppy controllers found > loop: module loaded > thinkpad_acpi: ThinkPad ACPI Extras v0.19 > thinkpad_acpi: http://ibm-acpi.sf.net/ > thinkpad_acpi: ThinkPad BIOS 7BETD3WW (2.14 ), EC 7BHT40WW-1.13 > thinkpad_acpi: Lenovo ThinkPad X60 > thinkpad_acpi: radio switch found; radios are enabled > thinkpad_acpi: standard ACPI backlight interface available, not loading native one... > input: ThinkPad Extra Buttons as /class/input/input4 > e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 > e1000e: Copyright (c) 1999-2007 Intel Corporation. > e1000e 0000:02:00.0: Disabling L1 ASPM > PCI: Setting latency timer of device 0000:02:00.0 to 64 > eth0: (PCI Express:2.5GB/s:Width x1) 00:16:d3:25:19:04 > eth0: Intel(R) PRO/1000 Network Connection > eth0: MAC: 2, PHY: 2, PBA No: 005302-003 > pcnet32.c:v1.34 14.Aug.2007 tsbogend@alpha.franken.de > e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > PPP generic driver version 2.4.2 > PPP Deflate Compression module registered > PPP BSD Compression module registered > SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). > CSLIP: code copyright 1989 Regents of the University of California. > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky > usbcore: registered new interface driver catc > /data/l/linux/drivers/net/usb/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver > usbcore: registered new interface driver asix > usbcore: registered new interface driver cdc_ether > usbcore: registered new interface driver net1080 > usbcore: registered new interface driver cdc_subset > usbcore: registered new interface driver zaurus > Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] > usbcore: registered new interface driver zd1211rw > usbcore: registered new interface driver zd1201 > iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23kds > iwl3945: Copyright(c) 2003-2007 Intel Corporation > PCI: Setting latency timer of device 0000:03:00.0 to 64 > iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection > iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels > phy0: Selected rate control algorithm 'iwl-3945-rs' > ACPI: PCI interrupt for device 0000:03:00.0 disabled > Linux video capture interface: v2.00 > Uniform Multi-Platform E-IDE driver > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH7: IDE controller (0x8086:0x27df rev 0x02) at PCI slot 0000:00:1f.1 > ICH7: not 100% native mode: will probe irqs later > ICH7: IDE port disabled > ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:PIO, hdb:PIO > Probing IDE interface ide0... > Probing IDE interface ide0... > Probing IDE interface ide1... > Driver 'sd' needs updating - please use bus_type methods > Driver 'sr' needs updating - please use bus_type methods > ahci 0000:00:1f.2: version 3.0 > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > scsi0 : ahci > ahci: autosuspend disabled > scsi1 : ahci > ahci: autosuspend disabled > scsi2 : ahci > ahci: autosuspend disabled > scsi3 : ahci > ahci: autosuspend disabled > ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 16 > ata2: DUMMY > ata3: DUMMY > ata4: DUMMY > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ATA-7: HTS541060G9SA00, MB3IC60H, max UDMA/100 > ata1.00: 117210240 sectors, multi 16: LBA48 > ata1.00: configured for UDMA/100 > scsi 0:0:0:0: Direct-Access ATA HTS541060G9SA00 MB3I PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda4 > sd 0:0:0:0: [sda] Attached SCSI disk > sd 0:0:0:0: Attached scsi generic sg0 type 0 > Yenta: CardBus bridge found at 0000:15:00.0 [17aa:201c] > Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 > Socket status: 30000006 > pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff > pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff > pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.25-rc6 ehci_hcd > usb usb1: SerialNumber: 0000:00:1d.7 > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > USB Universal Host Controller Interface driver v3.0 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.25-rc6 uhci_hcd > usb usb2: SerialNumber: 0000:00:1d.0 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.25-rc6 uhci_hcd > usb usb3: SerialNumber: 0000:00:1d.1 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.25-rc6 uhci_hcd > usb usb4: SerialNumber: 0000:00:1d.2 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.25-rc6 uhci_hcd > usb usb5: SerialNumber: 0000:00:1d.3 > usb 5-1: new full speed USB device using uhci_hcd and address 2 > usb 5-1: configuration #1 chosen from 1 choice > usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 > usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 5-1: Product: BCM2045B > usb 5-1: Manufacturer: Broadcom Corp > usb 5-2: new full speed USB device using uhci_hcd and address 3 > usb 5-2: configuration #1 chosen from 1 choice > usb 5-2: New USB device found, idVendor=0483, idProduct=2016 > usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 5-2: Product: Biometric Coprocessor > usb 5-2: Manufacturer: STMicroelectronics > usbcore: registered new interface driver cdc_acm > /data/l/linux/drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters > usbcore: registered new interface driver usblp > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as /class/input/input5 > input: PC Speaker as /class/input/input6 > input: PS/2 Generic Mouse as /class/input/input7 > proc_dir_entry 'rtc' already registered > Pid: 1, comm: swapper Not tainted 2.6.25-rc6 #186 > [] proc_register+0xd0/0x150 > [] create_proc_entry+0x4f/0xb0 > [] rtc_proc_add_device+0x1e/0x40 > [] rtc_device_register+0x1d8/0x210 > [] cmos_do_probe+0x120/0x330 > [] compare_pnp_id+0x25/0xc0 > [] pnp_device_probe+0x4f/0xb0 > [] driver_probe_device+0x88/0x170 > [] klist_next+0x53/0xa0 > [] __driver_attach+0x7a/0x80 > [] bus_for_each_dev+0x3a/0x60 > [] pnp_device_probe+0x0/0xb0 > [] driver_attach+0x16/0x20 > [] __driver_attach+0x0/0x80 > [] bus_add_driver+0xa9/0x210 > [] pnp_device_remove+0x0/0x30 > [] pnp_device_probe+0x0/0xb0 > [] driver_register+0x3b/0xf0 > [] kernel_init+0x121/0x2f0 > [] ret_from_fork+0x6/0x1c > [] kernel_init+0x0/0x2f0 > [] kernel_init+0x0/0x2f0 > [] kernel_thread_helper+0x7/0x10 > ======================= > rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com > Bluetooth: HCI USB driver ver 2.9 > usbcore: registered new interface driver hci_usb > Bluetooth: HCI UART driver ver 2.2 > Bluetooth: HCI H4 protocol initialized > Bluetooth: HCI BCSP protocol initialized > EDAC MC: Ver: 2.1.0 Mar 18 2008 > cpuidle: using governor ladder > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 18) > sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it. > PCI: Setting latency timer of device 0000:15:00.2 to 64 > mmc0: SDHCI at 0xe4301800 irq 18 DMA > ricoh-mmc: Ricoh MMC Controller disabling driver > ricoh-mmc: Copyright(c) Philip Langdale > usbcore: registered new interface driver usbhid > /data/l/linux/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC). > hda_intel: probe_mask set to 0x1 for device 17aa:2010 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > usbcore: registered new interface driver snd-usb-audio > ALSA device list: > #0: HDA Intel at 0xee240000 irq 17 > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > IrCOMM protocol (Dag Brattli) > Bluetooth: L2CAP ver 2.9 > Bluetooth: L2CAP socket layer initialized > Bluetooth: SCO (Voice Link) ver 0.5 > Bluetooth: SCO socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > Bluetooth: BNEP (Ethernet Emulation) ver 1.2 > Bluetooth: BNEP filters: protocol multicast > Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > ieee80211: 802.11 data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation > ieee80211_crypt: registered algorithm 'NULL' > ieee80211_crypt: registered algorithm 'WEP' > Installing 9P2000 support > Using IPI No-Shortcut mode > PM: Resume from partition /dev/sda1 > PM: Checking hibernation image. > PM: Resume from disk failed. > md: Autodetecting RAID arrays. > md: Scanned 0 and added 0 devices. > md: autorun ... > md: ... autorun DONE. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 324k freed > Failed to execute /tmp/swsusp-init. Attempting defaults... > EXT3 FS on sda4, internal journal > Adding 987988k swap on /dev/sda1. Priority:-1 extents:1 across:987988k > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda2, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > pcmcia: Detected deprecated PCMCIA ioctl usage from process: hwclock. > pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. > pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. > coda_read_super: Bad mount data > coda_read_super: device index: 0 > coda_read_super: rootfid is (01234567.ffffffff.08051a38.00000000) > coda: Unexpected interruption. > Failure of coda_cnode_make for root: error -4 > Clocksource tsc unstable (delta = -64447043 ns) > iwl3945: version magic '2.6.25-rc5 SMP mod_unload 686 ' should be '2.6.25-rc6 SMP mod_unload 686 ' > PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106) > iwl3945: version magic '2.6.25-rc5 SMP mod_unload 686 ' should be '2.6.25-rc6 SMP mod_unload 686 ' > iwl3945: version magic '2.6.25-rc5 SMP mod_unload 686 ' should be '2.6.25-rc6 SMP mod_unload 686 ' > wlan0: Initial auth_alg=0 > wlan0: authenticate with AP 00:11:2f:0e:95:a0 > wlan0: RX authentication from 00:11:2f:0e:95:a0 (alg=0 transaction=2 status=0) > wlan0: authenticated > wlan0: associate with AP 00:11:2f:0e:95:a0 > wlan0: RX AssocResp from 00:11:2f:0e:95:a0 (capab=0x401 status=0 aid=1) > wlan0: associated > acpiphp_glue: cannot get bridge info > acpiphp_glue: cannot get bridge info > acpiphp_glue: cannot get bridge info > PM: Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. > PM: Entering mem sleep > ACPI: Preparing to enter system sleep state S3 > sleepy: scsi_bus_suspend start > sleepy: sd_suspend start > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > sleepy: sd_suspend done > sd 0:0:0:0: suspended > ahci: autosuspend disabled > sleepy: scsi_bus_suspend done > drm_sysfs_suspend > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:15:00.2 disabled > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:03:00.0 disabled > ACPI: PCI interrupt for device 0000:02:00.0 disabled > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:00:1f.2 disabled > sleepy: ahci_pci_device_suspend done > ACPI: PCI interrupt for device 0000:00:1d.7 disabled > ACPI: PCI interrupt for device 0000:00:1d.3 disabled > ACPI: PCI interrupt for device 0000:00:1d.2 disabled > ACPI: PCI interrupt for device 0000:00:1d.1 disabled > ACPI: PCI interrupt for device 0000:00:1d.0 disabled > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > Disabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 is down > Device_power_down > hwsleep-0322 [00] enter_sleep_state : Entering sleep state [S3] > Back to C! > Enabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > SMP alternatives: switching to SMP code > Booting processor 1/1 ip 6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3657.58 BogoMIPS (lpj=7315160) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 > CPU0 attaching sched-domain: > domain 0: span 3 > groups: 1 2 > CPU1 attaching sched-domain: > domain 0: span 3 > groups: 2 1 > CPU1 is up > ACPI: EC: missing OBF confirmation, don't expect it any longer. > ACPI: EC: missing write data confirmation, don't expect it any longer. > PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900003, writing 900007) > PCI: Setting latency timer of device 0000:00:02.0 to 64 > PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003) > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20006050, writing 6050) > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) > PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) > PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) > PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 8070) > PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) > PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100107) > PCI: Setting latency timer of device 0000:00:1c.3 to 64 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > usb usb2: root hub lost power or was reset > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > usb usb3: root hub lost power or was reset > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > usb usb4: root hub lost power or was reset > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > usb usb5: root hub lost power or was reset > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > sleepy: ahci_pci_device_resume start > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > do_resume done > reset_controller > init_controller > ata_host_resume > all ok > sleepy: ahci_pci_device_resume done > PCI: Setting latency timer of device 0000:02:00.0 to 64 > PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing e4301800) > PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) > PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) > sleepy: scsi_bus_resume start > sleepy: sd_resume start > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded > ata1.00: configured for UDMA/100 > ata1.00: configured for UDMA/100 > ata1: EH complete > autoresume_sdev_work > sleepy: sd_resume done > sd 0:0:0:0: resumed > sleepy: scsi_bus_resume done > autoresume_sdev_work: have mutex > autoresume_sdev_work: resume_sdev done > autoresume_sdev_work: may be suspendable > autoresume_sdev_work: done > autoresume_sdev_work > autoresume_sdev_work: have mutex > autoresume_sdev_work: resume_sdev done > autoresume_sdev_work: may be suspendable > autoresume_sdev_work: done > sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > wlan0: No ProbeResp from current AP 00:11:2f:0e:95:a0 - assume out of range > PM: Finishing wakeup. > Restarting tasks ... <6>usb 5-1: USB disconnect, address 2 > done. > usb 5-2: USB disconnect, address 3 > usb 5-2: new full speed USB device using uhci_hcd and address 4 > usb 5-2: configuration #1 chosen from 1 choice > usb 5-2: New USB device found, idVendor=0483, idProduct=2016 > usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 5-2: Product: Biometric Coprocessor > usb 5-2: Manufacturer: STMicroelectronics > usb 5-1: new full speed USB device using uhci_hcd and address 5 > usb 5-1: configuration #1 chosen from 1 choice > usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 > usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 5-1: Product: BCM2045B > usb 5-1: Manufacturer: Broadcom Corp > hci_cmd_task: hci0 command tx timeout > acpiphp_glue: cannot get bridge info > acpiphp_glue: cannot get bridge info > PM: Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. > PM: Entering mem sleep > ACPI: Preparing to enter system sleep state S3 > sleepy: scsi_bus_suspend start > sleepy: sd_suspend start > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > sleepy: sd_suspend done > sd 0:0:0:0: suspended > ahci: autosuspend disabled > sleepy: scsi_bus_suspend done > drm_sysfs_suspend > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:15:00.2 disabled > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:03:00.0 disabled > ACPI: PCI interrupt for device 0000:02:00.0 disabled > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:00:1f.2 disabled > sleepy: ahci_pci_device_suspend done > ACPI: PCI interrupt for device 0000:00:1d.7 disabled > __tx_submit: hci0 tx submit failed urb e34dca24 type 2 err -113 > __tx_submit: hci0 tx submit failed urb f7151e4c type 2 err -113 > __tx_submit: hci0 tx submit failed urb f1ce0e4c type 2 err -113 > __tx_submit: hci0 tx submit failed urb f7151abc type 2 err -113 > ACPI: PCI interrupt for device 0000:00:1d.3 disabled > ACPI: PCI interrupt for device 0000:00:1d.2 disabled > ACPI: PCI interrupt for device 0000:00:1d.1 disabled > ACPI: PCI interrupt for device 0000:00:1d.0 disabled > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > Disabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 is down > Device_power_down > hwsleep-0322 [00] enter_sleep_state : Entering sleep state [S3] > Back to C! > Enabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > SMP alternatives: switching to SMP code > Booting processor 1/1 ip 6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3657.59 BogoMIPS (lpj=7315186) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 > CPU0 attaching sched-domain: > domain 0: span 3 > groups: 1 2 > CPU1 attaching sched-domain: > domain 0: span 3 > groups: 2 1 > CPU1 is up > PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900003, writing 900007) > PCI: Setting latency timer of device 0000:00:02.0 to 64 > PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003) > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) > PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) > PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) > PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20008070) > PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) > PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100107) > PCI: Setting latency timer of device 0000:00:1c.3 to 64 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > usb usb2: root hub lost power or was reset > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > usb usb3: root hub lost power or was reset > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > usb usb4: root hub lost power or was reset > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > usb usb5: root hub lost power or was reset > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > sleepy: ahci_pci_device_resume start > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > do_resume done > reset_controller > init_controller > ata_host_resume > all ok > sleepy: ahci_pci_device_resume done > PCI: Setting latency timer of device 0000:02:00.0 to 64 > PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing e4301800) > PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) > PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) > sleepy: scsi_bus_resume start > sleepy: sd_resume start > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded > ata1.00: configured for UDMA/100 > ata1.00: configured for UDMA/100 > ata1: EH complete > autoresume_sdev_work > sleepy: sd_resume done > sd 0:0:0:0: resumed > sleepy: scsi_bus_resume done > autoresume_sdev_work: have mutex > autoresume_sdev_work: resume_sdev done > autoresume_sdev_work: may be suspendable > autoresume_sdev_work: done > autoresume_sdev_work > autoresume_sdev_work: have mutex > autoresume_sdev_work: resume_sdev done > autoresume_sdev_work: may be suspendable > autoresume_sdev_work: done > sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > PM: Finishing wakeup. > Restarting tasks ... <6>usb 5-1: USB disconnect, address 5 > slab error in verify_redzone_free(): cache `size-1024': memory outside object was overwritten > Pid: 264, comm: khubd Not tainted 2.6.25-rc6 #186 > [] cache_free_debugcheck+0x18f/0x220 > [] __mutex_lock_slowpath+0x10c/0x1c0 > [] hci_usb_close+0xd3/0x120 > [] kfree+0x56/0xc0 > [] hci_usb_close+0xd3/0x120 > [] hci_usb_disconnect+0x2d/0x90 > [] usb_disable_interface+0x28/0x40 > [] usb_unbind_interface+0x50/0xa0 > [] __device_release_driver+0x51/0x90 > [] device_release_driver+0x1e/0x40 > [] bus_remove_device+0x60/0x90 > [] device_del+0xe3/0x150 > [] usb_disable_device+0x7e/0xe0 > [] usb_disconnect+0x96/0x120 > [] hub_thread+0x33e/0xd20 > [] schedule+0x32c/0x830 > [] try_to_wake_up+0x55/0x1d0 > [] autoremove_wake_function+0x0/0x50 > [] hub_thread+0x0/0xd20 > [] kthread+0x42/0x70 > [] kthread+0x0/0x70 > [] kernel_thread_helper+0x7/0x10 > ======================= > e3505734: redzone 1:0x5a5a5a5ad84156c5, redzone 2:0xffffffffd84156c5. > ------------[ cut here ]------------ > kernel BUG at /data/l/linux/mm/slab.c:2906! > invalid opcode: 0000 [#1] SMP > Modules linked in: > > Pid: 264, comm: khubd Not tainted (2.6.25-rc6 #186) > EIP: 0060:[] EFLAGS: 00010002 CPU: 0 > EIP is at cache_free_debugcheck+0x218/0x220 > EAX: e3505730 EBX: f7c01800 ECX: e35042b8 EDX: 00000005 > ESI: e3505734 EDI: d84156c5 EBP: 5a5a5a5a ESP: f7d91e28 > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 > Process khubd (pid: 264, ti=f7d90000 task=f7d8b980 task.ti=f7d90000) > Stack: c07fce50 e3505734 d84156c5 5a5a5a5a d84156c5 ffffffff c0562603 e3504280 > d84156c5 ffffffff f7c01800 f7c06388 e350573c 00000282 c0270d96 e34dca24 > e34dca10 00000000 f76ac578 c0562603 f76ac548 0000000c f70631e0 f76ac4c0 > Call Trace: > [] hci_usb_close+0xd3/0x120 > [] kfree+0x56/0xc0 > [] hci_usb_close+0xd3/0x120 > [] hci_usb_disconnect+0x2d/0x90 > [] usb_disable_interface+0x28/0x40 > [] usb_unbind_interface+0x50/0xa0 > [] __device_release_driver+0x51/0x90 > [] device_release_driver+0x1e/0x40 > [] bus_remove_device+0x60/0x90 > [] device_del+0xe3/0x150 > [] usb_disable_device+0x7e/0xe0 > [] usb_disconnect+0x96/0x120 > [] hub_thread+0x33e/0xd20 > [] schedule+0x32c/0x830 > [] try_to_wake_up+0x55/0x1d0 > [] autoremove_wake_function+0x0/0x50 > [] hub_thread+0x0/0xd20 > [] kthread+0x42/0x70 > [] kthread+0x0/0x70 > [] kernel_thread_helper+0x7/0x10 > ======================= > Code: 3d 00 40 02 00 0f 85 3b fe ff ff 8b 52 0c e9 33 fe ff ff 0f 0b eb fe 8b 52 0c e9 6d fe ff ff 0f 0b eb fe 0f 0b eb fe 0f 0b eb fe <0f> 0b eb fe 8d 74 26 00 55 57 56 53 83 ec 10 89 44 24 08 89 54 > EIP: [] cache_free_debugcheck+0x218/0x220 SS:ESP 0068:f7d91e28 > ---[ end trace 4ee36c05f33330e1 ]--- > done. > slab error in verify_redzone_free(): cache `size-1024': memory outside object was overwritten > Pid: 4, comm: ksoftirqd/0 Tainted: G D 2.6.25-rc6 #186 > [] cache_free_debugcheck+0x18f/0x220 > [] cache_free_debugcheck+0xd1/0x220 > [] free_fdtable_rcu+0x4c/0x70 > [] kfree+0x56/0xc0 > [] free_fdtable_rcu+0x4c/0x70 > [] __rcu_process_callbacks+0x63/0x180 > [] rcu_process_callbacks+0x17/0x30 > [] __do_softirq+0x72/0xf0 > [] ksoftirqd+0x0/0xd0 > [] do_softirq+0x37/0x40 > [] ksoftirqd+0x54/0xd0 > [] kthread+0x42/0x70 > [] kthread+0x0/0x70 > [] kernel_thread_helper+0x7/0x10 > ======================= > e3505b48: redzone 1:0xd84156c5c0562603, redzone 2:0xd84156c5635688c0. For how long has it been doing that? Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/