Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S935411AbYCSXxi (ORCPT ); Wed, 19 Mar 2008 19:53:38 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S935648AbYCSW0a (ORCPT ); Wed, 19 Mar 2008 18:26:30 -0400 Received: from az33egw02.freescale.net ([192.88.158.103]:44451 "EHLO az33egw02.freescale.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S935653AbYCSW0Y (ORCPT ); Wed, 19 Mar 2008 18:26:24 -0400 From: York Sun To: linux-kernel@vger.kernel.org Cc: linuxppc-dev@ozlabs.org, galak@kernel.crashing.org, linux-fbdev-devel@lists.sourceforge.net, York Sun Subject: [PATCH 2/2 v2] Add DIU platform code for MPC8610HPCD Date: Wed, 19 Mar 2008 13:50:27 -0500 Message-Id: <12059526271964-git-send-email-yorksun@freescale.com> X-Mailer: git-send-email 1.5.2.2 In-Reply-To: <12059526274026-git-send-email-yorksun@freescale.com> References: <12059526271941-git-send-email-yorksun@freescale.com> <12059526274026-git-send-email-yorksun@freescale.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9547 Lines: 319 Add platform code to support Freescale DIU. The platform code includes framebuffer memory allocation, pixel format, monitor port, etc. Signed-off-by: York Sun --- This patch is targeting 2.6.26 kernel. arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 182 +++++++++++++++++++++++++++- arch/powerpc/sysdev/fsl_soc.c | 41 ++++++ arch/powerpc/sysdev/fsl_soc.h | 22 ++++ 3 files changed, 243 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 0b07485..e087aa3 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -3,6 +3,7 @@ * * Initial author: Xianghua Xiao * Recode: Jason Jin + * York Sun * * Rewrite the interrupt routing. remove the 8259PIC support, * All the integrated device in ULI use sideband interrupt. @@ -38,6 +39,8 @@ #include #include +static unsigned char *pixis_bdcfg0, *pixis_arch; + static struct of_device_id __initdata mpc8610_ids[] = { { .compatible = "fsl,mpc8610-immr", }, {} @@ -161,12 +164,160 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288); #endif /* CONFIG_PCI */ +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + +static u32 get_busfreq(void) +{ + struct device_node *node; + + u32 fs_busfreq = 0; + node = of_find_node_by_type(NULL, "cpu"); + if (node) { + unsigned int size; + const unsigned int *prop = + of_get_property(node, "bus-frequency", &size); + if (prop) + fs_busfreq = *prop; + of_node_put(node); + }; + return fs_busfreq; +} + +unsigned int mpc8610hpcd_get_pixel_format + (unsigned int bits_per_pixel, int monitor_port) +{ + static const unsigned long pixelformat[][3] = { + {0x88882317, 0x88083218, 0x65052119}, + {0x88883316, 0x88082219, 0x65053118}, + }; + unsigned int pix_fmt, arch_monitor; + + arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1; + /* DVI port for board version 0x01 */ + + if (bits_per_pixel == 32) + pix_fmt = pixelformat[arch_monitor][0]; + else if (bits_per_pixel == 24) + pix_fmt = pixelformat[arch_monitor][1]; + else if (bits_per_pixel == 16) + pix_fmt = pixelformat[arch_monitor][2]; + else + pix_fmt = pixelformat[1][0]; + + return pix_fmt; +} + +void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base) +{ + int i; + if (monitor_port == 2) { /* dual link LVDS */ + for (i = 0; i < 256*3; i++) + gamma_table_base[i] = (gamma_table_base[i] << 2) | + ((gamma_table_base[i] >> 6) & 0x03); + } +} + +void mpc8610hpcd_set_monitor_port(int monitor_port) +{ + static const u8 bdcfg[] = {0xBD, 0xB5, 0xA5}; + if (monitor_port < 3) + *pixis_bdcfg0 = bdcfg[monitor_port]; +} + +void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) +{ + u32 __iomem *clkdvdr; + u32 temp; + /* variables for pixel clock calcs */ + ulong bestval, bestfreq, speed_ccb, minpixclock, maxpixclock; + ulong pixval; + long err; + int i; + + clkdvdr = ioremap(get_immrbase() + 0xe0800, sizeof(u32)); + if (!clkdvdr) { + printk(KERN_ERR "Err: can't map clock divider register!\n"); + return; + } + + /* Pixel Clock configuration */ + pr_debug("DIU: Bus Frequency = %d\n", get_busfreq()); + speed_ccb = get_busfreq(); + + /* Calculate the pixel clock with the smallest error */ + /* calculate the following in steps to avoid overflow */ + pr_debug("DIU pixclock in ps - %d\n", pixclock); + temp = 1000000000/pixclock; + temp *= 1000; + pixclock = temp; + pr_debug("DIU pixclock freq - %u\n", pixclock); + + temp = pixclock * 5 / 100; + pr_debug("deviation = %d\n", temp); + minpixclock = pixclock - temp; + maxpixclock = pixclock + temp; + pr_debug("DIU minpixclock - %lu\n", minpixclock); + pr_debug("DIU maxpixclock - %lu\n", maxpixclock); + pixval = speed_ccb/pixclock; + pr_debug("DIU pixval = %lu\n", pixval); + + err = 100000000; + bestval = pixval; + pr_debug("DIU bestval = %lu\n", bestval); + + bestfreq = 0; + for (i = -1; i <= 1; i++) { + temp = speed_ccb / ((pixval+i) + 1); + pr_debug("DIU test pixval i= %d, pixval=%lu, temp freq. = %u\n", + i, pixval, temp); + if ((temp < minpixclock) || (temp > maxpixclock)) + pr_debug("DIU exceeds monitor range (%lu to %lu)\n", + minpixclock, maxpixclock); + else if (abs(temp - pixclock) < err) { + pr_debug("Entered the else if block %d\n", i); + err = abs(temp - pixclock); + bestval = pixval+i; + bestfreq = temp; + } + } + + pr_debug("DIU chose = %lx\n", bestval); + pr_debug("DIU error = %ld\n NomPixClk ", err); + pr_debug("DIU: Best Freq = %lx\n", bestfreq); + /* Modify PXCLK in GUTS CLKDVDR */ + pr_debug("DIU: Current value of CLKDVDR = 0x%08x\n", (*clkdvdr)); + temp = (*clkdvdr) & 0x2000FFFF; + *clkdvdr = temp; /* turn off clock */ + *clkdvdr = temp | 0x80000000 | (((bestval) & 0x1F) << 16); + pr_debug("DIU: Modified value of CLKDVDR = 0x%08x\n", (*clkdvdr)); + iounmap(clkdvdr); +} + +ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf) +{ + return snprintf(buf, PAGE_SIZE, + "%c0 - DVI\n" + "%c1 - Single link LVDS\n" + "%c2 - Dual link LVDS\n", + monitor_port == 0 ? '*' : ' ', + monitor_port == 1 ? '*' : ' ', + monitor_port == 2 ? '*' : ' '); +} + +int mpc8610hpcd_set_sysfs_monitor_port(int val) +{ + return val < 3 ? val : 0; +} + +#endif + +int __init preallocate_diu_videomemory(void); static void __init mpc86xx_hpcd_setup_arch(void) { -#ifdef CONFIG_PCI + struct resource r; struct device_node *np; -#endif + if (ppc_md.progress) ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0); @@ -183,6 +334,33 @@ mpc86xx_hpcd_setup_arch(void) } } #endif +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + preallocate_diu_videomemory(); + diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format; + diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table; + diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port; + diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock; + diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port; + diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port; +#endif + + np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis"); + if (np) { + of_address_to_resource(np, 0, &r); + of_node_put(np); + pixis_bdcfg0 = ioremap(r.start + 0x00000008, sizeof(u8)); + if (!pixis_bdcfg0) { + printk(KERN_ERR "Err: can't map FPGA cfg register!\n"); + return; + } + pixis_arch = ioremap(r.start + 0x00000001, sizeof(u8)); + if (!pixis_arch) { + printk(KERN_ERR "Err: can't map FPGA arch register!\n"); + return; + } + } else + printk(KERN_ERR "Err: " + "can't find device node 'fsl,fpga-pixis'\n"); printk("MPC86xx HPCD board from Freescale Semiconductor\n"); } diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 2c5388c..38a52c9 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -1438,3 +1438,44 @@ void fsl_rstcr_restart(char *cmd) while (1) ; } #endif + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) +struct platform_diu_data_ops diu_ops = { + .diu_size = 1280 * 1024 * 4, /* default one 1280x1024 buffer */ +}; +EXPORT_SYMBOL(diu_ops); + +int __init preallocate_diu_videomemory(void) +{ + pr_debug("diu_size=%lu\n", diu_ops.diu_size); + + diu_ops.diu_mem = __alloc_bootmem(diu_ops.diu_size, 8, 0); + if (!diu_ops.diu_mem) { + printk(KERN_ERR "fsl-diu: cannot allocate %lu bytes\n", + diu_ops.diu_size); + return -ENOMEM; + } + + printk(KERN_INFO "%s: diu_mem=%p\n", __func__, diu_ops.diu_mem); + + rh_init(&diu_ops.diu_rh_info, 4096, ARRAY_SIZE(diu_ops.diu_rh_block), + diu_ops.diu_rh_block); + return rh_attach_region(&diu_ops.diu_rh_info, + (unsigned long) diu_ops.diu_mem, + diu_ops.diu_size); +} + +static int __init early_parse_diufb(char *p) +{ + if (!p) + return 1; + + diu_ops.diu_size = _ALIGN_UP(memparse(p, &p), 8); + + printk(KERN_INFO "%s: diu_size=%lu\n", __func__, diu_ops.diu_size); + + return 0; +} +early_param("diufb", early_parse_diufb); + +#endif diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 63e7db3..5601be1 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -16,5 +16,27 @@ extern int fsl_spi_init(struct spi_board_info *board_infos, void (*deactivate_cs)(u8 cs, u8 polarity)); extern void fsl_rstcr_restart(char *cmd); + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) +#include +#include +struct platform_diu_data_ops { + rh_block_t diu_rh_block[16]; + rh_info_t diu_rh_info; + unsigned long diu_size; + void *diu_mem; + + unsigned int (*get_pixel_format) (unsigned int bits_per_pixel, + int monitor_port); + void (*set_gamma_table) (int monitor_port, char *gamma_table_base); + void (*set_monitor_port) (int monitor_port); + void (*set_pixel_clock) (unsigned int pixclock); + ssize_t (*show_monitor_port) (int monitor_port, char *buf); + int (*set_sysfs_monitor_port) (int val); +}; + +extern struct platform_diu_data_ops diu_ops; +#endif + #endif #endif -- 1.5.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/