Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932881AbYCUXPO (ORCPT ); Fri, 21 Mar 2008 19:15:14 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1763452AbYCUWx3 (ORCPT ); Fri, 21 Mar 2008 18:53:29 -0400 Received: from 216-99-217-87.dsl.aracnet.com ([216.99.217.87]:41361 "EHLO sous-sol.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1763410AbYCUWx0 (ORCPT ); Fri, 21 Mar 2008 18:53:26 -0400 Message-Id: <20080321224421.540314761@sous-sol.org> References: <20080321224250.144333319@sous-sol.org> User-Agent: quilt/0.46-1 Date: Fri, 21 Mar 2008 15:43:37 -0700 From: Chris Wright To: linux-kernel@vger.kernel.org, stable@kernel.org Cc: Justin Forbes , Zwane Mwaikambo , "Theodore Ts'o" , Randy Dunlap , Dave Jones , Chuck Wolber , Chris Wedgwood , Michael Krufky , Chuck Ebbert , Domenico Andreoli , torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Michael Buesch , Greg KH , linux-wireless@vger.kernel.org, bcm43xx-dev@lists.berlios.de, alexey.zaytsev@gmail.com, Larry Finger , "John W. Linville" , Greg Kroah-Hartman Subject: [patch 47/76] b43: Backport bcm4311 fix Content-Disposition: inline; filename=b43-backport-bcm4311-fix.patch Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5063 Lines: 140 -stable review patch. If anyone has any objections, please let us know. --------------------- From: Michael Buesch This is a backport of upstream commit 013978b6 ("b43: Changes to enable BCM4311 rev 02 with wireless core revision 13") and the changes include the following: (1) Add the 802.11 rev 13 device to the ssb_device_id table to load b43. (2) Add PHY revision 9 to the supported list. (3) Change the 2-bit routing code for address extensions to 0b10 rather than the 0b01 used for the 32-bit case. (4) Remove some magic numbers in the DMA setup. The DMA implementation for this chip supports full 64-bit addressing with one exception. Whenever the Descriptor Ring Buffer is in high memory, a fatal DMA error occurs. This problem was not present in 2.6.24-rc2 due to code to "Bias the placement of kernel pages at lower PFNs". When commit 44048d70 reverted that code, the DMA error appeared. As a "fix", use the GFP_DMA flag when allocating the buffer for 64-bit DMA. At present, this problem is thought to arise from a hardware error. Signed-off-by: Michael Buesch Cc: Larry Finger Cc: John W. Linville Cc: Alexey Zaytsev Signed-off-by: Chris Wright Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/b43/dma.c | 30 ++++++++++++++++++++++-------- drivers/net/wireless/b43/main.c | 3 ++- 2 files changed, 24 insertions(+), 9 deletions(-) --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -165,7 +165,7 @@ static void op64_fill_descriptor(struct addrhi = (((u64) dmaaddr >> 32) & ~SSB_DMA_TRANSLATION_MASK); addrext = (((u64) dmaaddr >> 32) & SSB_DMA_TRANSLATION_MASK) >> SSB_DMA_TRANSLATION_SHIFT; - addrhi |= ssb_dma_translation(ring->dev->dev); + addrhi |= (ssb_dma_translation(ring->dev->dev) << 1); if (slot == ring->nr_slots - 1) ctl0 |= B43_DMA64_DCTL0_DTABLEEND; if (start) @@ -426,9 +426,21 @@ static inline static int alloc_ringmemory(struct b43_dmaring *ring) { struct device *dev = ring->dev->dev->dev; + gfp_t flags = GFP_KERNEL; + /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K + * alignment and 8K buffers for 64-bit DMA with 8K alignment. Testing + * has shown that 4K is sufficient for the latter as long as the buffer + * does not cross an 8K boundary. + * + * For unknown reasons - possibly a hardware error - the BCM4311 rev + * 02, which uses 64-bit DMA, needs the ring buffer in very low memory, + * which accounts for the GFP_DMA flag below. + */ + if (ring->dma64) + flags |= GFP_DMA; ring->descbase = dma_alloc_coherent(dev, B43_DMA_RINGMEMSIZE, - &(ring->dmabase), GFP_KERNEL); + &(ring->dmabase), flags); if (!ring->descbase) { b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); return -ENOMEM; @@ -483,7 +495,7 @@ int b43_dmacontroller_rx_reset(struct b4 return 0; } -/* Reset the RX DMA channel */ +/* Reset the TX DMA channel */ int b43_dmacontroller_tx_reset(struct b43_wldev *dev, u16 mmio_base, int dma64) { int i; @@ -647,7 +659,7 @@ static int dmacontroller_setup(struct b4 b43_dma_write(ring, B43_DMA64_TXRINGHI, ((ringbase >> 32) & ~SSB_DMA_TRANSLATION_MASK) - | trans); + | (trans << 1)); } else { u32 ringbase = (u32) (ring->dmabase); @@ -680,8 +692,9 @@ static int dmacontroller_setup(struct b4 b43_dma_write(ring, B43_DMA64_RXRINGHI, ((ringbase >> 32) & ~SSB_DMA_TRANSLATION_MASK) - | trans); - b43_dma_write(ring, B43_DMA64_RXINDEX, 200); + | (trans << 1)); + b43_dma_write(ring, B43_DMA64_RXINDEX, ring->nr_slots * + sizeof(struct b43_dmadesc64)); } else { u32 ringbase = (u32) (ring->dmabase); @@ -695,11 +708,12 @@ static int dmacontroller_setup(struct b4 b43_dma_write(ring, B43_DMA32_RXRING, (ringbase & ~SSB_DMA_TRANSLATION_MASK) | trans); - b43_dma_write(ring, B43_DMA32_RXINDEX, 200); + b43_dma_write(ring, B43_DMA32_RXINDEX, ring->nr_slots * + sizeof(struct b43_dmadesc32)); } } - out: +out: return err; } --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -101,6 +101,7 @@ static const struct ssb_device_id b43_ss SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13), SSB_DEVTABLE_END }; @@ -3079,7 +3080,7 @@ static int b43_phy_versioning(struct b43 unsupported = 1; break; case B43_PHYTYPE_G: - if (phy_rev > 8) + if (phy_rev > 9) unsupported = 1; break; default: -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/