Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756670AbYCVL1A (ORCPT ); Sat, 22 Mar 2008 07:27:00 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754160AbYCVL0v (ORCPT ); Sat, 22 Mar 2008 07:26:51 -0400 Received: from sorrow.cyrius.com ([65.19.161.204]:1762 "EHLO sorrow.cyrius.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754143AbYCVL0s (ORCPT ); Sat, 22 Mar 2008 07:26:48 -0400 Date: Sat, 22 Mar 2008 12:27:12 +0100 From: Martin Michlmayr To: Stefan Richter Cc: linux1394-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org Subject: Re: nobody cared about IRQ 19 (firewire, on a HP 2510p notebook) Message-ID: <20080322112712.GC3022@deprecation.cyrius.com> References: <20080321153952.GA26354@deprecation.cyrius.com> <47E3E2CF.5070408@s5r6.in-berlin.de> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="ikeVEW9yuYc//A+q" Content-Disposition: inline In-Reply-To: <47E3E2CF.5070408@s5r6.in-berlin.de> User-Agent: Mutt/1.5.16 (2007-06-11) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 34119 Lines: 715 --ikeVEW9yuYc//A+q Content-Type: text/plain; charset=us-ascii Content-Disposition: inline * Stefan Richter [2008-03-21 17:31]: > According to your 2.6.22 dmesg, this happens a while after the firewire > subsystem seemingly successfully initialized the controller. Could you > please post "dmesg | grep firewire" from 2.6.25-rc6 though? firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI version 1.10 firewire_core: created device fw0: GUID 001b249929010210, S400 I've also attached the complete dmesg from 2.6.25-rc6. -- Martin Michlmayr http://www.cyrius.com/ --ikeVEW9yuYc//A+q Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Initializing cgroup subsys cpuset Linux version 2.6.25-rc6-amd64 (Debian 2.6.25~rc6-1~experimental.1~snapshot.10910) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+1)) #1 SMP Tue Mar 18 02:45:58 UTC 2008 Command line: root=/dev/mapper/lucky-root ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable) BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved) BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS) BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 522160) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000F77A0, 0024 (r2 HP ) ACPI: XSDT 7F7C81C4, 0074 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP 7F7C8084, 00F4 (r4 HP 30C9 3 HP 1) ACPI: DSDT 7F7C84C0, 13484 (r1 HP nc2500 10000 MSFT 3000001) ACPI: FACS 7F7E7D80, 0040 ACPI: SLIC 7F7C8238, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: HPET 7F7C83B0, 0038 (r1 HP 30C9 1 HP 1) ACPI: APIC 7F7C83E8, 0068 (r1 HP 30C9 1 HP 1) ACPI: MCFG 7F7C8450, 003C (r1 HP 30C9 1 HP 1) ACPI: TCPA 7F7C848C, 0032 (r2 HP 30C9 1 HP 1) ACPI: SSDT 7F7DB944, 02BE (r1 HP HPQPAT 1 MSFT 3000001) ACPI: SSDT 7F7DC586, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) ACPI: SSDT 7F7DC7E5, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) ACPI: SSDT 7F7DC88B, 04D7 (r1 HP CpuPm 3000 INTL 20060317) ACPI: DMI detected: Hewlett-Packard No NUMA configuration found Faking a node at 0000000000000000-000000007f7b0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 522160) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007f7b0000 NODE_DATA [000000000000c000 - 0000000000012fff] bootmap [0000000000013000 - 0000000000022ef7] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-6b10a7] TEXT DATA BSS early res: 3 [37907000-37fef10a] RAMDISK early res: 4 [9fc00-a0bff] EBDA early res: 5 [8000-bfff] PGTABLE No mptable found. [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 522160 On node 0 totalpages: 522063 DMA zone: 56 pages used for memmap DMA zone: 1209 pages reserved DMA zone: 2734 pages, LIFO batch:0 DMA32 zone: 7082 pages used for memmap DMA32 zone: 510982 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 36208 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 513716 Policy zone: DMA32 Kernel command line: root=/dev/mapper/lucky-root ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 1196.997 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2047392k/2088640k available (2303k kernel code, 40860k reserved, 1335k data, 376k init) CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay using timer specific routine.. 2397.35 BogoMIPS (lpj=4794716) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 8312479 Detected 8.312 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 2393.99 BogoMIPS (lpj=4787998) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU U7600 @ 1.20GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 domain 1: span 00000003 groups: 00000003 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 domain 1: span 00000003 groups: 00000003 net_namespace: 1016 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [C003] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11) ACPI: PCI Interrupt Link [C130] (IRQs *10 11) ACPI: PCI Interrupt Link [C131] (IRQs 10 *11) ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C142] (IRQs *10 11) ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C144] (IRQs 10 *11) ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] ACPI: Power Resource [C29F] (on) ACPI: Power Resource [C1C7] (off) ACPI: Power Resource [C3AD] (off) ACPI: Power Resource [C3B0] (off) ACPI: Power Resource [C3C3] (off) ACPI: Power Resource [C3C4] (off) ACPI: Power Resource [C3C5] (off) ACPI: Power Resource [C3C6] (off) ACPI: Power Resource [C3C7] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered 00:00: calling quirk 0xffffffff8036b6af: quirk_system_pci_resources+0x0/0x16e() pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: Plug and Play ACPI device, IDs SYN0130 SYN0100 SYN0002 PNP0f13 (active) 00:0a: calling quirk 0xffffffff8036b6af: quirk_system_pci_resources+0x0/0x16e() pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) 00:0c: calling quirk 0xffffffff8036b6af: quirk_system_pci_resources+0x0/0x16e() pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) 00:0d: calling quirk 0xffffffff8036b6af: quirk_system_pci_resources+0x0/0x16e() pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: the driver 'system' has been registered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved system 00:00: driver attached system 00:0a: ioport range 0x500-0x55f has been reserved system 00:0a: ioport range 0x800-0x80f has been reserved system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0a: driver attached system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0x2f8-0x2ff has been reserved system 00:0c: ioport range 0x3f8-0x3ff has been reserved system 00:0c: ioport range 0x1000-0x107f has been reserved system 00:0c: ioport range 0x1100-0x113f has been reserved system 00:0c: ioport range 0x1200-0x121f has been reserved system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0c: iomem range 0xfed90000-0xfed99fff could not be reserved system 00:0c: driver attached system 00:0d: iomem range 0xcee00-0xcffff has been reserved system 00:0d: iomem range 0xd2000-0xd3fff has been reserved system 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0d: driver attached PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: 0xe0000000-0xe00fffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 0x00001400-0x000014ff IO window: 0x00001800-0x000018ff PREFETCH window: 0x88000000-0x8bffffff MEM window: 0x8c000000-0x8fffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 0xe0100000-0xe03fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 7072k freed audit: initializing netlink socket (disabled) type=2000 audit(1206184530.572:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled pnp: the driver 'serial' has been registered isa bounce pool size: 16 pages brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:08: driver attached pnp: the driver 'i8042 aux' has been registered i8042 aux 00:09: driver attached PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 376k freed input: AT Translated Set 2 keyboard as /class/input/input1 ACPI: Transitioning device [C3B1] to D3 ACPI: PNP0C0B:00 is registered as cooling_device0 ACPI: Fan [C3B1] (off) ACPI: Transitioning device [C3B2] to D3 ACPI: PNP0C0B:01 is registered as cooling_device1 ACPI: Fan [C3B2] (off) ACPI: Transitioning device [C3C8] to D3 ACPI: PNP0C0B:02 is registered as cooling_device2 ACPI: Fan [C3C8] (off) ACPI: Transitioning device [C3C9] to D3 ACPI: PNP0C0B:03 is registered as cooling_device3 ACPI: Fan [C3C9] (off) ACPI: Transitioning device [C3CA] to D3 ACPI: PNP0C0B:04 is registered as cooling_device4 ACPI: Fan [C3CA] (off) ACPI: Transitioning device [C3CB] to D3 ACPI: PNP0C0B:05 is registered as cooling_device5 ACPI: Fan [C3CB] (off) ACPI: Transitioning device [C3CC] to D3 ACPI: PNP0C0B:06 is registered as cooling_device6 ACPI: Fan [C3CC] (off) ACPI: SSDT 7F7DBCCA, 023D (r1 HP Cpu0Ist 3000 INTL 20060317) ACPI: SSDT 7F7DBF8C, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device7 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7F7DBC02, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) ACPI: SSDT 7F7DBF07, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) Marking TSC unstable due to TSC halts in idle Time: hpet clocksource has been installed. ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device8 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [TZ6] (25 C) ACPI: LNXTHERM:02 is registered as thermal_zone1 ACPI: Thermal Zone [TZ0] (44 C) ACPI: LNXTHERM:03 is registered as thermal_zone2 ACPI: Thermal Zone [TZ1] (46 C) ACPI: LNXTHERM:04 is registered as thermal_zone3 ACPI: Thermal Zone [TZ3] (35 C) ACPI: LNXTHERM:05 is registered as thermal_zone4 ACPI: Thermal Zone [TZ4] (26 C) ACPI: LNXTHERM:06 is registered as thermal_zone5 ACPI: Thermal Zone [TZ5] (0 C) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002040 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-rc6-amd64 uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00002060 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25-rc6-amd64 uhci_hcd usb usb2: SerialNumber: 0000:00:1a.1 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25-rc6-amd64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020a0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25-rc6-amd64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000020c0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25-rc6-amd64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0621000 usb 3-2: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected Clocksource tsc unstable (delta = -268136546 ns) usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: EHCI Host Controller usb usb6: Manufacturer: Linux 2.6.25-rc6-amd64 ehci_hcd usb usb6: SerialNumber: 0000:00:1a.7 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0628000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: EHCI Host Controller usb usb7: Manufacturer: Linux 2.6.25-rc6-amd64 ehci_hcd usb usb7: SerialNumber: 0000:00:1d.7 ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ICH8M: not 100% native mode: will probe irqs later ICH8M: IDE port disabled ide0: BM-DMA at 0x20e0-0x20e7, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... usb 3-2: device not accepting address 2, error -71 hdb: MATSHITADVD-RAM UJ-842S, ATAPI CD/DVD-ROM drive hda: TOSHIBA MK8009GAH, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19 SCSI subsystem initialized libata version 3.00 loaded. usb 3-2: new full speed USB device using uhci_hcd and address 4 firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI version 1.10 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB), CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 usb 3-2: configuration #1 chosen from 1 choice usb 3-2: New USB device found, idVendor=08ff, idProduct=2580 usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-2: Product: Fingerprint Sensor firewire_core: created device fw0: GUID 001b249929010210, S400 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. agpgart: Detected an Intel 965GM Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 ACPI: AC Adapter [C23B] (off-line) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input3 ACPI: Sleep Button (CM) [C2BF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [C155] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:19.0 to 64 eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:06:12:ee eth0: Intel(R) PRO/1000 Network Connection ACPI: Battery Slot [C23D] (battery present) eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff ACPI: WMI: Mapper loaded Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c9] ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale Yenta: ISA IRQ mask 0x04b8, PCI irq 18 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff input: PC Speaker as /class/input/input5 ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11) ricoh-mmc: Controller is now disabled. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) pnp: the driver 'tpm_inf_pnp' has been registered tpm_inf_pnp 00:02: Found C284 with ID IFX0102 tpm_inf_pnp 00:02: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) tpm_inf_pnp 00:02: driver attached sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:02:06.2 [1180:0822] (rev 21) ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 20 sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it. mmc0: SDHCI at 0xe0102000 irq 20 DMA iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks iwl4965: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:10:00.0 to 64 iwl4965: Detected Intel Wireless WiFi Link 4965AGN iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels phy0: Selected rate control algorithm 'iwl-4965-rs' ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI interrupt for device 0000:10:00.0 disabled input: PS/2 Generic Mouse as /class/input/input6 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input7 EXT3 FS on dm-1, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1048568k swap on /dev/mapper/lucky-swap. Priority:-1 extents:1 across:1048568k eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX eth0: 10/100 speed: disabling TSO NET: Registered protocol family 10 lo: Disabled Privacy Extensions pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled eth0: no IPv6 routers present ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdb: task_no_data_intr: error=0x04 { AbortedCommand } ide: failed opcode was: 0xef [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 eth0: no IPv6 routers present ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 domain 1: span 00000003 groups: 00000003 domain 2: span 00000003 groups: 00000003 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 domain 1: span 00000003 groups: 00000003 domain 2: span 00000003 groups: 00000003 ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 iwl4965: Could not read microcode: -2 ACPI: PCI interrupt for device 0000:10:00.0 disabled --ikeVEW9yuYc//A+q-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/