Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758371AbYCZKAj (ORCPT ); Wed, 26 Mar 2008 06:00:39 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754287AbYCZKAa (ORCPT ); Wed, 26 Mar 2008 06:00:30 -0400 Received: from nwd2mail10.analog.com ([137.71.25.55]:26681 "EHLO nwd2mail10.analog.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754276AbYCZKA2 (ORCPT ); Wed, 26 Mar 2008 06:00:28 -0400 X-IronPort-AV: E=Sophos;i="4.25,557,1199682000"; d="scan'208";a="65081257" From: Bryan Wu To: dmitry.torokhov@gmail.com, khali@linux-fr.org Cc: linux-input@vger.kernel.org, i2c@lm-sensors.org, linux-kernel@vger.kernel.org, Michael Hennerich , Bryan Wu , Bryan Wu Subject: [PATCH 1/1] Input/Joystick Driver: add support AD7142 joystick driver Date: Wed, 26 Mar 2008 18:00:22 -0700 Message-Id: <1206579622-21915-1-git-send-email-cooloney@kernel.org> X-Mailer: git-send-email 1.5.4.3 In-Reply-To: <> References: <> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13355 Lines: 499 From: Michael Hennerich Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Bryan Wu --- drivers/input/joystick/Kconfig | 6 + drivers/input/joystick/Makefile | 1 + drivers/input/joystick/ad7142.c | 447 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 454 insertions(+), 0 deletions(-) create mode 100644 drivers/input/joystick/ad7142.c diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 7c662ee..e65aeb6 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -282,4 +282,10 @@ config JOYSTICK_XPAD_LEDS This option enables support for the LED which surrounds the Big X on XBox 360 controller. +config JOYSTICK_AD7142 + tristate "Analog Devices AD7142 Joystick support" + depends on BLACKFIN && I2C + ---help--- + Say Y here if you want to support an AD7142 joystick + endif diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index e855abb..8df388f 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -5,6 +5,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_JOYSTICK_A3D) += a3d.o +obj-$(CONFIG_JOYSTICK_AD7142) += ad7142.o obj-$(CONFIG_JOYSTICK_ADI) += adi.o obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o obj-$(CONFIG_JOYSTICK_ANALOG) += analog.o diff --git a/drivers/input/joystick/ad7142.c b/drivers/input/joystick/ad7142.c new file mode 100644 index 0000000..900affd --- /dev/null +++ b/drivers/input/joystick/ad7142.c @@ -0,0 +1,447 @@ +/* + * I2C Based AD7142 Joystick Input Device Driver + * + * Copyright 2005-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Bryan Wu "); +MODULE_DESCRIPTION("Driver for AD7142 Joysticks"); +MODULE_LICENSE("GPL"); + +#define AD7142_I2C_ID 0xE622 + +/* + * Ram map - these registers are defined as we go along + */ +/* RW Power & conversion control */ +#define PWRCONVCTL 0x00 + +/* RW Ambient compensation control register 0 - 3 */ +#define AMBCOMPCTL_REG0 0x01 +#define AMBCOMPCTL_REG1 0x02 +#define AMBCOMPCTL_REG2 0x03 +#define AMBCOMPCTL_REG3 0x04 + +/* RW Interrupt enable register 0 - 2 */ +#define INTEN_REG0 0x05 +#define INTEN_REG1 0x06 +#define INTEN_REG2 0x07 + +/* R Low limit interrupt status register 0 */ +#define INTSTAT_REG0 0x08 +/* R High limit interrupt status register 1 */ +#define INTSTAT_REG1 0x09 +/* R Interrupt status register 2 */ +#define INTSTAT_REG2 0x0A + +/* R ADC stage 0 - 11 result (uncompensated) actually located in SRAM */ +#define ADCRESULT_S0 0x0B +#define ADCRESULT_S1 0x0C +#define ADCRESULT_S2 0x0D +#define ADCRESULT_S3 0x0E +#define ADCRESULT_S4 0x0F +#define ADCRESULT_S5 0x10 +#define ADCRESULT_S6 0x11 +#define ADCRESULT_S7 0x12 +#define ADCRESULT_S8 0x13 +#define ADCRESULT_S9 0x14 +#define ADCRESULT_S10 0x15 +#define ADCRESULT_S11 0x16 + +/* R I.D. Register */ +#define DEVID 0x17 + +/* R Current threshold status register 0, 1 */ +#define THRES_STAT_REG0 0x40 +#define THRES_STAT_REG1 0x41 +/* R Current proximity status register 2 */ +#define PROX_STAT_REG 0x42 + +#define STAGE0_CONNECTION 0x80 +#define STAGE1_CONNECTION 0x88 +#define STAGE2_CONNECTION 0x90 +#define STAGE3_CONNECTION 0x98 +#define STAGE4_CONNECTION 0xA0 +#define STAGE5_CONNECTION 0xA8 +#define STAGE6_CONNECTION 0xB0 +#define STAGE7_CONNECTION 0xB8 +#define STAGE8_CONNECTION 0xC0 +#define STAGE9_CONNECTION 0xC8 +#define STAGE10_CONNECTION 0xD0 +#define STAGE11_CONNECTION 0xD8 + +/* + * STAGE0: Button1 <----> CIN6(+) Button2 <----> CIN5(-) + * STAGE1: Button3 <----> CIN4(-) Button4 <----> CIN3(+) + * STAGE2: Axes.Left <----> CIN11(-) Axes.Right <----> CIN13(+) + * STAGE3: Axes.Up <----> CIN12(-) Axes.Down <----> CIN10(+) + */ +static const unsigned short stage[5][8] = { + {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, +}; + +struct ad7142_data { + struct input_dev *input; + struct i2c_client *client; + + struct work_struct work; + int is_open; + + unsigned short old_status_low; + unsigned short old_status_high; +}; + +static irqreturn_t ad7142_interrupt(int irq, void *_data) +{ + struct ad7142_data *data = _data; + + disable_irq_nosync(irq); + if (data->is_open) + schedule_work(&data->work); + + return IRQ_HANDLED; +} + +static int ad7142_i2c_write(struct i2c_client *client, unsigned short offset, + const unsigned short *data, unsigned int len) +{ + int ret = -1; + int i; + u8 block_data[34]; + + if (len < 1 || len > 16) { + dev_err(&client->dev, "Write data length error\n"); + return ret; + } + + /* Do raw I2C, not smbus compatible */ + block_data[0] = (offset & 0xFF00) >> 8; + block_data[1] = (offset & 0x00FF); + + for (i = 0; i < len; i++) { + block_data[2 * i + 2] = (*data & 0xFF00) >> 8; + block_data[2 * i + 3] = *data++ & 0x00FF; + } + + ret = i2c_master_send(client, block_data, (len * 2 + 2)); + if (ret < 0) { + dev_err(&client->dev, "I2C write error\n"); + return ret; + } + + return ret; +} + +static int ad7142_i2c_read(struct i2c_client *client, unsigned short offset, + unsigned short *data, unsigned int len) +{ + int ret = -1; + int i; + u8 block_data[32]; + + if (len < 1 || len > 16) { + dev_err(&client->dev, "read data length error\n"); + return ret; + } + + /* Do raw I2C, not smbus compatible */ + block_data[0] = (offset & 0xFF00) >> 8; + block_data[1] = (offset & 0x00FF); + + ret = i2c_master_send(client, block_data, 2); + if (ret < 0) { + dev_err(&client->dev, "I2C read error\n"); + return ret; + } + + ret = i2c_master_recv(client, block_data, len * 2); + if (ret < 0) { + dev_err(&client->dev, "I2C transfer error\n"); + return ret; + } + + for (i = 0; i < len; i++) { + unsigned short temp; + temp = block_data[2 * i]; + temp = (temp << 8) & 0xFF00; + *data++ = temp | block_data[2 * i + 1]; + } + + return ret; +} + +static void ad7142_work(struct work_struct *work) +{ + struct ad7142_data *data = container_of(work, + struct ad7142_data, + work); + struct i2c_client *client = data->client; + struct input_dev *input = data->input; + unsigned short irqno_low, irqno_high; + unsigned short temp; + + ad7142_i2c_read(client, INTSTAT_REG0, &irqno_low, 1); + temp = irqno_low ^ data->old_status_low; + switch (temp) { + case 0x0001: + input_report_key(input, BTN_BASE, (irqno_low & 0x0001)); + break; + case 0x0002: + input_report_key(input, BTN_BASE4, + ((irqno_low & 0x0002) >> 1)); + break; + case 0x0004: + input_report_key(input, KEY_UP, + ((irqno_low & 0x0004) >> 2)); + break; + case 0x0008: + input_report_key(input, KEY_RIGHT, + ((irqno_low & 0x0008) >> 3)); + break; + } + data->old_status_low = irqno_low; + + ad7142_i2c_read(client, INTSTAT_REG1, &irqno_high, 1); + temp = irqno_high ^ data->old_status_high; + switch (temp) { + case 0x0001: + input_report_key(input, BTN_BASE2, irqno_high & 0x0001); + break; + case 0x0002: + input_report_key(input, BTN_BASE3, + ((irqno_high & 0x0002) >> 1)); + break; + case 0x0004: + input_report_key(input, KEY_DOWN, + ((irqno_high & 0x0004) >> 2)); + break; + case 0x0008: + input_report_key(input, KEY_LEFT, + ((irqno_high & 0x0008) >> 3)); + break; + } + data->old_status_high = irqno_high; + + input_sync(input); + + enable_irq(client->irq); +} + +static int ad7142_open(struct input_dev *dev) +{ + struct ad7142_data *data = input_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned short id, value; + + ad7142_i2c_read(client, DEVID, &id, 1); + if (id != AD7142_I2C_ID) { + dev_err(&client->dev, "Open AD7142 error\n"); + return -ENODEV; + } + + ad7142_i2c_write(client, STAGE0_CONNECTION, stage[0], 8); + ad7142_i2c_write(client, STAGE1_CONNECTION, stage[1], 8); + ad7142_i2c_write(client, STAGE2_CONNECTION, stage[2], 8); + ad7142_i2c_write(client, STAGE3_CONNECTION, stage[3], 8); + ad7142_i2c_write(client, STAGE4_CONNECTION, stage[4], 8); + ad7142_i2c_write(client, STAGE5_CONNECTION, stage[4], 8); + ad7142_i2c_write(client, STAGE6_CONNECTION, stage[4], 8); + ad7142_i2c_write(client, STAGE7_CONNECTION, stage[4], 8); + ad7142_i2c_write(client, STAGE8_CONNECTION, stage[4], 8); + ad7142_i2c_write(client, STAGE9_CONNECTION, stage[4], 8); + ad7142_i2c_write(client, STAGE10_CONNECTION, stage[4], 8); + ad7142_i2c_write(client, STAGE11_CONNECTION, stage[4], 8); + + /* In full power mode */ + value = 0x00B0; + ad7142_i2c_write(client, PWRCONVCTL, &value, 1); + + value = 0x0690; + ad7142_i2c_write(client, AMBCOMPCTL_REG1, &value, 1); + + value = 0x0664; + ad7142_i2c_write(client, AMBCOMPCTL_REG2, &value, 1); + + value = 0x290F; + ad7142_i2c_write(client, AMBCOMPCTL_REG3, &value, 1); + + value = 0x000F; + ad7142_i2c_write(client, INTEN_REG0, &value, 1); + ad7142_i2c_write(client, INTEN_REG1, &value, 1); + + value = 0x0000; + ad7142_i2c_write(client, INTEN_REG2, &value, 1); + + ad7142_i2c_read(client, AMBCOMPCTL_REG1, &value, 1); + + value = 0x000F; + ad7142_i2c_write(client, AMBCOMPCTL_REG0, &value, 1); + + data->is_open = 1; + enable_irq(client->irq); + return 0; +} + +static void ad7142_close(struct input_dev *dev) +{ + struct ad7142_data *data = input_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned short value; + + disable_irq(client->irq); + data->is_open = 0; + + flush_scheduled_work(); + + /* + * Turn AD7142 to full shutdown mode + * No CDC conversions + */ + value = 0x0001; + ad7142_i2c_write(client, PWRCONVCTL, &value, 1); +} + +static int ad7142_probe(struct i2c_client *client) +{ + struct ad7142_data *data; + struct input_dev *input; + int rc; + + /* + * The ADV7142 has an autoincrement function, + * use it if the adapter understands raw I2C + */ + rc = i2c_check_functionality(client->adapter, I2C_FUNC_I2C); + if (!rc) { + dev_err(&client->dev, + "This bus doesn't support raw I2C operation\n"); + return -EINVAL; + } + + data = kzalloc(sizeof(struct ad7142_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + data->client = client; + + i2c_set_clientdata(client, data); + + /* Start workqueue for defer message transfer */ + INIT_WORK(&data->work, ad7142_work); + + if (client->irq > 0) { + rc = request_irq(client->irq, ad7142_interrupt, + IRQF_TRIGGER_LOW, "ad7142_joystick", data); + if (rc) { + dev_err(&client->dev, "Can't allocate irq %d\n", + client->irq); + goto fail_irq; + } + } else + dev_warn(&client->dev, "IRQ not configured!\n"); + + dev_info(&client->dev, "is attached at 0x%02x\n", client->addr); + + /* Allocate and register AD7142 input device */ + data->input = input_allocate_device(); + if (!data->input) { + dev_err(&client->dev, "Can't allocate input device\n"); + rc = -ENOMEM; + goto fail_allocate; + } + + input = data->input; + input->open = ad7142_open; + input->close = ad7142_close; + input->evbit[0] = BIT_MASK(EV_KEY); + input->keybit[BIT_WORD(BTN_BASE)] = BIT_MASK(BTN_BASE) | + BIT_MASK(BTN_BASE2) | + BIT_MASK(BTN_BASE3) | + BIT_MASK(BTN_BASE4); + input->keybit[BIT_WORD(KEY_UP)] |= BIT_MASK(KEY_UP) | + BIT_MASK(KEY_DOWN) | + BIT_MASK(KEY_LEFT) | + BIT_MASK(KEY_RIGHT); + + input->name = "ad7142 joystick"; + input->phys = "ad7142/input0"; + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + input_set_drvdata(input, data); + + rc = input_register_device(input); + if (rc) { + dev_err(&client->dev, + "Failed to register AD7142 input device!\n"); + goto fail_register; + } + + return 0; + +fail_register: + input_set_drvdata(input, NULL); + input_free_device(input); +fail_allocate: + free_irq(client->irq, data); +fail_irq: + i2c_set_clientdata(client, NULL); + kfree(data); + return rc; +} + +static int __exit ad7142_remove(struct i2c_client *client) +{ + struct ad7142_data *data = i2c_get_clientdata(client); + + if (client->irq > 0) + free_irq(client->irq, data); + + flush_scheduled_work(); + + input_set_drvdata(data->input, NULL); + input_unregister_device(data->input); + + kfree(data); + + i2c_set_clientdata(client, NULL); + return 0; +} + +static struct i2c_driver ad7142_driver = { + .driver = { + .name = "ad7142_joystick", + }, + .probe = ad7142_probe, + .remove = __exit_p(ad7142_remove), +}; + +static int __init ad7142_init(void) +{ + return i2c_add_driver(&ad7142_driver); +} + +static void __exit ad7142_exit(void) +{ + i2c_del_driver(&ad7142_driver); +} + +module_init(ad7142_init); +module_exit(ad7142_exit); + -- 1.5.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/