Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1764884AbYFFQAp (ORCPT ); Fri, 6 Jun 2008 12:00:45 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1761586AbYFFPzi (ORCPT ); Fri, 6 Jun 2008 11:55:38 -0400 Received: from aeryn.fluff.org.uk ([87.194.8.8]:51821 "EHLO kira.home.fluff.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1760271AbYFFPzb (ORCPT ); Fri, 6 Jun 2008 11:55:31 -0400 Message-Id: <20080606155524.699256747@fluff.org.uk> References: <20080606155117.074799346@fluff.org.uk> User-Agent: quilt/0.46-1 Date: Fri, 06 Jun 2008 16:51:18 +0100 From: Ben Dooks To: linux-kernel@vger.kernel.org Cc: Pierre Ossman , Harald Welte , Thomas Kleffel , Roman Moravcik , Ben Dooks Subject: [patch 01/15] MMC: S3C24XX MMC/SD driver. From: Thomas Kleffel Content-Disposition: inline; filename=thirdparty/openmoko-mci/s3c_mci.patch Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 40159 Lines: 1532 This is the latest S3C MMC/SD driver by Thomas Kleffel Signed-off-by: Ben Dooks Index: linux-2.6.26-rc5-q/include/asm-arm/arch-s3c2410/regs-sdi.h =================================================================== --- linux-2.6.26-rc5-q.orig/include/asm-arm/arch-s3c2410/regs-sdi.h 2008-05-13 10:13:29.000000000 +0100 +++ linux-2.6.26-rc5-q/include/asm-arm/arch-s3c2410/regs-sdi.h 2008-06-06 15:08:32.000000000 +0100 @@ -28,9 +28,15 @@ #define S3C2410_SDIDCNT (0x30) #define S3C2410_SDIDSTA (0x34) #define S3C2410_SDIFSTA (0x38) + #define S3C2410_SDIDATA (0x3C) #define S3C2410_SDIIMSK (0x40) +#define S3C2440_SDIDATA (0x40) +#define S3C2440_SDIIMSK (0x3C) + +#define S3C2440_SDICON_SDRESET (1<<8) +#define S3C2440_SDICON_MMCCLOCK (1<<5) #define S3C2410_SDICON_BYTEORDER (1<<4) #define S3C2410_SDICON_SDIOIRQ (1<<3) #define S3C2410_SDICON_RWAITEN (1<<2) @@ -42,7 +48,8 @@ #define S3C2410_SDICMDCON_LONGRSP (1<<10) #define S3C2410_SDICMDCON_WAITRSP (1<<9) #define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_INDEX (0xff) +#define S3C2410_SDICMDCON_SENDERHOST (1<<6) +#define S3C2410_SDICMDCON_INDEX (0x3f) #define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) #define S3C2410_SDICMDSTAT_CMDSENT (1<<11) @@ -51,6 +58,9 @@ #define S3C2410_SDICMDSTAT_XFERING (1<<8) #define S3C2410_SDICMDSTAT_INDEX (0xff) +#define S3C2440_SDIDCON_DS_BYTE (0<<22) +#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) +#define S3C2440_SDIDCON_DS_WORD (2<<22) #define S3C2410_SDIDCON_IRQPERIOD (1<<21) #define S3C2410_SDIDCON_TXAFTERRESP (1<<20) #define S3C2410_SDIDCON_RXAFTERCMD (1<<19) @@ -59,6 +69,7 @@ #define S3C2410_SDIDCON_WIDEBUS (1<<16) #define S3C2410_SDIDCON_DMAEN (1<<15) #define S3C2410_SDIDCON_STOP (1<<14) +#define S3C2440_SDIDCON_DATSTART (1<<14) #define S3C2410_SDIDCON_DATMODE (3<<12) #define S3C2410_SDIDCON_BLKNUM (0x7ff) @@ -68,6 +79,7 @@ #define S3C2410_SDIDCON_XFER_RXSTART (2<<12) #define S3C2410_SDIDCON_XFER_TXSTART (3<<12) +#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) #define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) #define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) @@ -82,10 +94,12 @@ #define S3C2410_SDIDSTA_TXDATAON (1<<1) #define S3C2410_SDIDSTA_RXDATAON (1<<0) +#define S3C2440_SDIFSTA_FIFORESET (1<<16) +#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ #define S3C2410_SDIFSTA_TFDET (1<<13) #define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TXHALF (1<<11) -#define S3C2410_SDIFSTA_TXEMPTY (1<<10) +#define S3C2410_SDIFSTA_TFHALF (1<<11) +#define S3C2410_SDIFSTA_TFEMPTY (1<<10) #define S3C2410_SDIFSTA_RFLAST (1<<9) #define S3C2410_SDIFSTA_RFFULL (1<<8) #define S3C2410_SDIFSTA_RFHALF (1<<7) Index: linux-2.6.26-rc5-q/drivers/mmc/host/s3cmci.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.26-rc5-q/drivers/mmc/host/s3cmci.c 2008-06-06 15:31:39.000000000 +0100 @@ -0,0 +1,1337 @@ +/* + * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver + * + * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "s3cmci.h" + +#define DRIVER_NAME "s3c-mci" + +enum dbg_channels { + dbg_err = (1 << 0), + dbg_debug = (1 << 1), + dbg_info = (1 << 2), + dbg_irq = (1 << 3), + dbg_sg = (1 << 4), + dbg_dma = (1 << 5), + dbg_pio = (1 << 6), + dbg_fail = (1 << 7), + dbg_conf = (1 << 8), +}; + +static const int dbgmap_err = dbg_err | dbg_fail; +static const int dbgmap_info = dbg_info | dbg_conf; +static const int dbgmap_debug = dbg_debug; + +#define dbg(host, channels, args...) \ + if (dbgmap_err & channels) \ + dev_err(&host->pdev->dev, args); \ + else if (dbgmap_info & channels) \ + dev_info(&host->pdev->dev, args);\ + else if (dbgmap_debug & channels) \ + dev_dbg(&host->pdev->dev, args); + +#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) + +static struct s3c2410_dma_client s3cmci_dma_client = { + .name = "s3c-mci", +}; + +static void finalize_request(struct s3cmci_host *host); +static void s3cmci_send_request(struct mmc_host *mmc); +static void s3cmci_reset(struct s3cmci_host *host); + +#ifdef CONFIG_MMC_DEBUG + +static inline void dbg_dumpregs(struct s3cmci_host *host, char *prefix) +{ + u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize; + u32 datcon, datcnt, datsta, fsta, imask; + + con = readl(host->base + S3C2410_SDICON); + pre = readl(host->base + S3C2410_SDIPRE); + cmdarg = readl(host->base + S3C2410_SDICMDARG); + cmdcon = readl(host->base + S3C2410_SDICMDCON); + cmdsta = readl(host->base + S3C2410_SDICMDSTAT); + r0 = readl(host->base + S3C2410_SDIRSP0); + r1 = readl(host->base + S3C2410_SDIRSP1); + r2 = readl(host->base + S3C2410_SDIRSP2); + r3 = readl(host->base + S3C2410_SDIRSP3); + timer = readl(host->base + S3C2410_SDITIMER); + bsize = readl(host->base + S3C2410_SDIBSIZE); + datcon = readl(host->base + S3C2410_SDIDCON); + datcnt = readl(host->base + S3C2410_SDIDCNT); + datsta = readl(host->base + S3C2410_SDIDSTA); + fsta = readl(host->base + S3C2410_SDIFSTA); + imask = readl(host->base + host->sdiimsk); + + dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n", + prefix, con, pre, timer); + + dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n", + prefix, cmdcon, cmdarg, cmdsta); + + dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]" + " DSTA:[%08x] DCNT:[%08x]\n", + prefix, datcon, fsta, datsta, datcnt); + + dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]" + " R2:[%08x] R3:[%08x]\n", + prefix, r0, r1, r2, r3); +} + +static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, + int stop) +{ + snprintf(host->dbgmsg_cmd, 300, + "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u", + host->ccnt, (stop?" (STOP)":""), + cmd->opcode, cmd->arg, cmd->flags, cmd->retries); + + if (cmd->data) { + snprintf(host->dbgmsg_dat, 300, + "#%u bsize:%u blocks:%u bytes:%u", + host->dcnt, cmd->data->blksz, + cmd->data->blocks, + cmd->data->blocks * cmd->data->blksz); + } else { + host->dbgmsg_dat[0] = '\0'; + } +} + +static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, + int fail) +{ + unsigned int dbglvl = fail?dbg_fail:dbg_debug; + + if (!cmd) + return; + + if (cmd->error == MMC_ERR_NONE) { + dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n", + host->dbgmsg_cmd, cmd->resp[0]); + } else { + dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n", + cmd->error, host->dbgmsg_cmd, host->status); + } + + if (!cmd->data) + return; + + if (cmd->data->error == MMC_ERR_NONE) { + dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat); + } else { + dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n", + cmd->data->error, host->dbgmsg_dat, + readl(host->base + S3C2410_SDIDCNT)); + } +} +#endif + +static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) +{ + u32 newmask; + + newmask = readl(host->base + host->sdiimsk); + newmask|= imask; + + writel(newmask, host->base + host->sdiimsk); + + return newmask; +} + +static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) +{ + u32 newmask; + + newmask = readl(host->base + host->sdiimsk); + newmask&= ~imask; + + writel(newmask, host->base + host->sdiimsk); + + return newmask; +} + +static inline void clear_imask(struct s3cmci_host *host) +{ + writel(0, host->base + host->sdiimsk); +} + +static inline int get_data_buffer(struct s3cmci_host *host, + volatile u32 *words, volatile u32 **pointer) +{ + struct scatterlist *sg; + + if (host->pio_active == XFER_NONE) + return -EINVAL; + + if ((!host->mrq) || (!host->mrq->data)) + return -EINVAL; + + if (host->pio_sgptr >= host->mrq->data->sg_len) { + dbg(host, dbg_debug, "no more buffers (%i/%i)\n", + host->pio_sgptr, host->mrq->data->sg_len); + return -EBUSY; + } + sg = &host->mrq->data->sg[host->pio_sgptr]; + + *words = sg->length >> 2; + *pointer= page_address(sg->page) + sg->offset; + + host->pio_sgptr++; + + dbg(host, dbg_sg, "new buffer (%i/%i)\n", + host->pio_sgptr, host->mrq->data->sg_len); + + return 0; +} + +#define FIFO_FILL(host) ((readl(host->base + S3C2410_SDIFSTA) & S3C2410_SDIFSTA_COUNTMASK) >> 2) +#define FIFO_FREE(host) ((63 - (readl(host->base + S3C2410_SDIFSTA) & S3C2410_SDIFSTA_COUNTMASK)) >> 2) + +static inline void do_pio_read(struct s3cmci_host *host) +{ + int res; + u32 fifo; + void __iomem *from_ptr; + + //write real prescaler to host, it might be set slow to fix + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + from_ptr = host->base + host->sdidata; + + while ((fifo = FIFO_FILL(host))) { + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, + &host->pio_ptr); + if (res) { + host->pio_active = XFER_NONE; + host->complete_what = COMPLETION_FINALIZE; + + dbg(host, dbg_pio, "pio_read(): " + "complete (no more data).\n"); + return; + } + + dbg(host, dbg_pio, "pio_read(): new target: [%i]@[%p]\n", + host->pio_words, host->pio_ptr); + } + + dbg(host, dbg_pio, "pio_read(): fifo:[%02i] " + "buffer:[%03i] dcnt:[%08X]\n", + fifo, host->pio_words, + readl(host->base + S3C2410_SDIDCNT)); + + if (fifo > host->pio_words) + fifo = host->pio_words; + + host->pio_words-= fifo; + host->pio_count+= fifo; + + while(fifo--) { + *(host->pio_ptr++) = readl(from_ptr); + } + } + + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); + if (res) { + dbg(host, dbg_pio, "pio_read(): " + "complete (no more buffers).\n"); + host->pio_active = XFER_NONE; + host->complete_what = COMPLETION_FINALIZE; + + return; + } + } + + enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); +} + +static inline void do_pio_write(struct s3cmci_host *host) +{ + int res; + u32 fifo; + + void __iomem *to_ptr; + + to_ptr = host->base + host->sdidata; + + while ((fifo = FIFO_FREE(host))) { + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, + &host->pio_ptr); + if (res) { + dbg(host, dbg_pio, "pio_write(): " + "complete (no more data).\n"); + host->pio_active = XFER_NONE; + + return; + } + + dbg(host, dbg_pio, "pio_write(): " + "new source: [%i]@[%p]\n", + host->pio_words, host->pio_ptr); + + } + + if (fifo > host->pio_words) + fifo = host->pio_words; + + host->pio_words-= fifo; + host->pio_count+= fifo; + + while(fifo--) { + writel(*(host->pio_ptr++), to_ptr); + } + } + + enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); +} + +static void pio_tasklet(unsigned long data) +{ + struct s3cmci_host *host = (struct s3cmci_host *) data; + + + if (host->pio_active == XFER_WRITE) + do_pio_write(host); + + if (host->pio_active == XFER_READ) + do_pio_read(host); + + if (host->complete_what == COMPLETION_FINALIZE) { + clear_imask(host); + if (host->pio_active != XFER_NONE) { + dbg(host, dbg_err, "unfinished %s " + "- pio_count:[%u] pio_words:[%u]\n", + (host->pio_active == XFER_READ)?"read":"write", + host->pio_count, host->pio_words); + + host->mrq->data->error = MMC_ERR_DMA; + } + + disable_irq(host->irq); + finalize_request(host); + } +} + +/* + * ISR for SDI Interface IRQ + * Communication between driver and ISR works as follows: + * host->mrq points to current request + * host->complete_what tells the ISR when the request is considered done + * COMPLETION_CMDSENT when the command was sent + * COMPLETION_RSPFIN when a response was received + * COMPLETION_XFERFINISH when the data transfer is finished + * COMPLETION_XFERFINISH_RSPFIN both of the above. + * host->complete_request is the completion-object the driver waits for + * + * 1) Driver sets up host->mrq and host->complete_what + * 2) Driver prepares the transfer + * 3) Driver enables interrupts + * 4) Driver starts transfer + * 5) Driver waits for host->complete_rquest + * 6) ISR checks for request status (errors and success) + * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error + * 7) ISR completes host->complete_request + * 8) ISR disables interrupts + * 9) Driver wakes up and takes care of the request + * + * Note: "->error"-fields are expected to be set to 0 before the request + * was issued by mmc.c - therefore they are only set, when an error + * contition comes up + */ + +static irqreturn_t s3cmci_irq(int irq, void *dev_id) +{ + struct s3cmci_host *host; + struct mmc_command *cmd; + u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; + u32 mci_cclear, mci_dclear; + unsigned long iflags; + + host = (struct s3cmci_host *)dev_id; + + spin_lock_irqsave(&host->complete_lock, iflags); + + mci_csta = readl(host->base + S3C2410_SDICMDSTAT); + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_dcnt = readl(host->base + S3C2410_SDIDCNT); + mci_fsta = readl(host->base + S3C2410_SDIFSTA); + mci_imsk = readl(host->base + host->sdiimsk); + mci_cclear = 0; + mci_dclear = 0; + + if ((host->complete_what == COMPLETION_NONE) || + (host->complete_what == COMPLETION_FINALIZE)) { + host->status = "nothing to complete"; + clear_imask(host); + goto irq_out; + } + + if (!host->mrq) { + host->status = "no active mrq"; + clear_imask(host); + goto irq_out; + } + + cmd = host->cmd_is_stop?host->mrq->stop:host->mrq->cmd; + + if (!cmd) { + host->status = "no active cmd"; + clear_imask(host); + goto irq_out; + } + + if (!host->dodma) { + if ((host->pio_active == XFER_WRITE) && + (mci_fsta & S3C2410_SDIFSTA_TFDET)) { + + disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); + tasklet_schedule(&host->pio_tasklet); + host->status = "pio tx"; + } + + if ((host->pio_active == XFER_READ) && + (mci_fsta & S3C2410_SDIFSTA_RFDET)) { + + disable_imask(host, + S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); + + tasklet_schedule(&host->pio_tasklet); + host->status = "pio rx"; + } + } + + if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { + cmd->error = MMC_ERR_TIMEOUT; + host->status = "error: command timeout"; + goto fail_transfer; + } + + if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) { + if (host->complete_what == COMPLETION_CMDSENT) { + host->status = "ok: command sent"; + goto close_transfer; + } + + mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT; + } + + if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { + if (cmd->flags & MMC_RSP_CRC) { + cmd->error = MMC_ERR_BADCRC; + host->status = "error: bad command crc"; + goto fail_transfer; + } + + mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; + } + + if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) { + if (host->complete_what == COMPLETION_RSPFIN) { + host->status = "ok: command response received"; + goto close_transfer; + } + + if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) + host->complete_what = COMPLETION_XFERFINISH; + + mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN; + } + + /* errors handled after this point are only relevant + when a data transfer is in progress */ + + if (!cmd->data) + goto clear_status_bits; + + /* Check for FIFO failure */ + if (host->is2440) { + if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { + host->mrq->data->error = MMC_ERR_FIFO; + host->status = "error: 2440 fifo failure"; + goto fail_transfer; + } + } else { + if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { + cmd->data->error = MMC_ERR_FIFO; + host->status = "error: fifo failure"; + goto fail_transfer; + } + } + + if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { + cmd->data->error = MMC_ERR_BADCRC; + host->status = "error: bad data crc (outgoing)"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { + cmd->data->error = MMC_ERR_BADCRC; + host->status = "error: bad data crc (incoming)"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { + cmd->data->error = MMC_ERR_TIMEOUT; + host->status = "error: data timeout"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) { + if (host->complete_what == COMPLETION_XFERFINISH) { + host->status = "ok: data transfer completed"; + goto close_transfer; + } + + if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) { + host->complete_what = COMPLETION_RSPFIN; + } + + mci_dclear |= S3C2410_SDIDSTA_XFERFINISH; + } + +clear_status_bits: + writel(mci_cclear, host->base + S3C2410_SDICMDSTAT); + writel(mci_dclear, host->base + S3C2410_SDIDSTA); + + goto irq_out; + +fail_transfer: + host->pio_active = XFER_NONE; + +close_transfer: + host->complete_what = COMPLETION_FINALIZE; + + clear_imask(host); + tasklet_schedule(&host->pio_tasklet); + + goto irq_out; + +irq_out: + dbg(host, dbg_irq, "csta:0x%08x dsta:0x%08x " + "fsta:0x%08x dcnt:0x%08x status:%s.\n", + mci_csta, mci_dsta, mci_fsta, + mci_dcnt, host->status); + + spin_unlock_irqrestore(&host->complete_lock, iflags); + return IRQ_HANDLED; + +} + +/* + * ISR for the CardDetect Pin +*/ + +static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) +{ + struct s3cmci_host *host = (struct s3cmci_host *)dev_id; + + dbg(host, dbg_irq, "card detect\n"); + + mmc_detect_change(host->mmc, 500); + + return IRQ_HANDLED; +} + +void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id, + int size, enum s3c2410_dma_buffresult result) +{ + unsigned long iflags; + u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt; + struct s3cmci_host *host = (struct s3cmci_host *)buf_id; + + mci_csta = readl(host->base + S3C2410_SDICMDSTAT); + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_fsta = readl(host->base + S3C2410_SDIFSTA); + mci_dcnt = readl(host->base + S3C2410_SDIDCNT); + + if ((!host->mrq) || (!host->mrq) || (!host->mrq->data)) + return; + + if (!host->dmatogo) + return; + + spin_lock_irqsave(&host->complete_lock, iflags); + + if (result != S3C2410_RES_OK) { + dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x " + "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n", + mci_csta, mci_dsta, mci_fsta, + mci_dcnt, result, host->dmatogo); + + goto fail_request; + } + + host->dmatogo--; + if (host->dmatogo) { + dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] " + "DCNT:[%08x] toGo:%u\n", + size, mci_dsta, mci_dcnt, host->dmatogo); + + goto out; + } + + dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", + size, mci_dsta, mci_dcnt); + + host->complete_what = COMPLETION_FINALIZE; + +out: + tasklet_schedule(&host->pio_tasklet); + spin_unlock_irqrestore(&host->complete_lock, iflags); + return; + + +fail_request: + host->mrq->data->error = MMC_ERR_DMA; + host->complete_what = COMPLETION_FINALIZE; + writel(0, host->base + host->sdiimsk); + goto out; + +} + +static void finalize_request(struct s3cmci_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = host->cmd_is_stop?mrq->stop:mrq->cmd; + int debug_as_failure = 0; + + if (host->complete_what != COMPLETION_FINALIZE) + return; + + if (!mrq) + return; + + if (cmd->data && (cmd->error == MMC_ERR_NONE) && + (cmd->data->error == MMC_ERR_NONE)) { + + if (host->dodma && (!host->dma_complete)) { + dbg(host, dbg_dma, "DMA Missing!\n"); + return; + } + } + + // Read response + cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0); + cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1); + cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2); + cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3); + + // reset clock speed, as it could still be set low for + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + if (cmd->error) + debug_as_failure = 1; + + if (cmd->data && cmd->data->error) + debug_as_failure = 1; + + //if(cmd->flags & MMC_RSP_MAYFAIL) debug_as_failure = 0; + +#ifdef CONFIG_MMC_DEBUG + dbg_dumpcmd(host, cmd, debug_as_failure); +#endif + //Cleanup controller + writel(0, host->base + S3C2410_SDICMDARG); + writel(0, host->base + S3C2410_SDIDCON); + writel(0, host->base + S3C2410_SDICMDCON); + writel(0, host->base + host->sdiimsk); + + if (cmd->data && cmd->error) + cmd->data->error = cmd->error; + + if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) { + host->cmd_is_stop = 1; + s3cmci_send_request(host->mmc); + return; + } + + // If we have no data transfer we are finished here + if (!mrq->data) + goto request_done; + + // Calulate the amout of bytes transfer, but only if there was + // no error + if (mrq->data->error == MMC_ERR_NONE) { + mrq->data->bytes_xfered = + (mrq->data->blocks * mrq->data->blksz); + } else { + mrq->data->bytes_xfered = 0; + } + + // If we had an error while transfering data we flush the + // DMA channel and the fifo to clear out any garbage + if (mrq->data->error != MMC_ERR_NONE) { + if (host->dodma) + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + + if (host->is2440) { + //Clear failure register and reset fifo + writel(S3C2440_SDIFSTA_FIFORESET | + S3C2440_SDIFSTA_FIFOFAIL, + host->base + S3C2410_SDIFSTA); + } else { + u32 mci_con; + + //reset fifo + mci_con = readl(host->base + S3C2410_SDICON); + mci_con|= S3C2410_SDICON_FIFORESET; + + writel(mci_con, host->base + S3C2410_SDICON); + } + } + +request_done: + host->complete_what = COMPLETION_NONE; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); +} + + +void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source) +{ + static int setup_ok = 0; + static enum s3c2410_dmasrc last_source = -1; + + if (last_source == source) + return; + + last_source = source; + + s3c2410_dma_devconfig(host->dma, source, 3, + host->mem->start + host->sdidata); + + if (!setup_ok) { + s3c2410_dma_config(host->dma, 4, + (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); + s3c2410_dma_set_buffdone_fn(host->dma, s3cmci_dma_done_callback); + s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); + setup_ok = 1; + } +} + +static void s3cmci_send_command(struct s3cmci_host *host, + struct mmc_command *cmd) +{ + u32 ccon, imsk; + + imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT | + S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT | + S3C2410_SDIIMSK_RESPONSECRC; + + enable_imask(host, imsk); + + if (cmd->data) { + host->complete_what = COMPLETION_XFERFINISH_RSPFIN; + } else if (cmd->flags & MMC_RSP_PRESENT) { + host->complete_what = COMPLETION_RSPFIN; + } else { + host->complete_what = COMPLETION_CMDSENT; + } + + writel(cmd->arg, host->base + S3C2410_SDICMDARG); + + ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX; + ccon|= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART; + + if (cmd->flags & MMC_RSP_PRESENT) + ccon |= S3C2410_SDICMDCON_WAITRSP; + + if (cmd->flags & MMC_RSP_136) + ccon|= S3C2410_SDICMDCON_LONGRSP; + + writel(ccon, host->base + S3C2410_SDICMDCON); +} + +static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) +{ + u32 dcon, imsk, stoptries=3; + + /* write DCON register */ + + if (!data) { + writel(0, host->base + S3C2410_SDIDCON); + return 0; + } + + while(readl(host->base + S3C2410_SDIDSTA) & + (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { + + dbg(host, dbg_err, + "mci_setup_data() transfer stillin progress.\n"); + + writel(0, host->base + S3C2410_SDIDCON); + s3cmci_reset(host); + + if (0 == (stoptries--)) { +#ifdef CONFIG_MMC_DEBUG + dbg_dumpregs(host, "DRF"); +#endif + + return -EINVAL; + } + } + + dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; + + if (host->dodma) { + dcon |= S3C2410_SDIDCON_DMAEN; + } + + if (host->bus_width == MMC_BUS_WIDTH_4) { + dcon |= S3C2410_SDIDCON_WIDEBUS; + } + + if (!(data->flags & MMC_DATA_STREAM)) { + dcon |= S3C2410_SDIDCON_BLOCKMODE; + } + + if (data->flags & MMC_DATA_WRITE) { + dcon |= S3C2410_SDIDCON_TXAFTERRESP; + dcon |= S3C2410_SDIDCON_XFER_TXSTART; + } + + if (data->flags & MMC_DATA_READ) { + dcon |= S3C2410_SDIDCON_RXAFTERCMD; + dcon |= S3C2410_SDIDCON_XFER_RXSTART; + } + + if (host->is2440) { + dcon |= S3C2440_SDIDCON_DS_WORD; + dcon |= S3C2440_SDIDCON_DATSTART; + } + + writel(dcon, host->base + S3C2410_SDIDCON); + + /* write BSIZE register */ + + writel(data->blksz, host->base + S3C2410_SDIBSIZE); + + /* add to IMASK register */ + imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC | + S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH; + + enable_imask(host, imsk); + + /* write TIMER register */ + + if (host->is2440) { + writel(0x007FFFFF, host->base + S3C2410_SDITIMER); + } else { + writel(0x0000FFFF, host->base + S3C2410_SDITIMER); + + //FIX: set slow clock to prevent timeouts on read + if (data->flags & MMC_DATA_READ) { + writel(0xFF, host->base + S3C2410_SDIPRE); + } + } + + //debug_dump_registers(host, "Data setup:"); + + return 0; +} + +static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) +{ + int rw = (data->flags & MMC_DATA_WRITE)?1:0; + + if (rw != ((data->flags & MMC_DATA_READ)?0:1)) + return -EINVAL; + + host->pio_sgptr = 0; + host->pio_words = 0; + host->pio_count = 0; + host->pio_active = rw?XFER_WRITE:XFER_READ; + + if (rw) { + do_pio_write(host); + enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); + } else { + enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF + | S3C2410_SDIIMSK_RXFIFOLAST); + } + + return 0; +} + +static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) +{ + int dma_len, i; + + int rw = (data->flags & MMC_DATA_WRITE)?1:0; + + if (rw != ((data->flags & MMC_DATA_READ)?0:1)) + return -EINVAL; + + s3cmci_dma_setup(host, rw?S3C2410_DMASRC_MEM:S3C2410_DMASRC_HW); + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + (rw)?DMA_TO_DEVICE:DMA_FROM_DEVICE); + + + if (dma_len == 0) + return -ENOMEM; + + host->dma_complete = 0; + host->dmatogo = dma_len; + + for (i = 0; i < dma_len; i++) { + int res; + + dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + + res = s3c2410_dma_enqueue(host->dma, (void *) host, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + + if (res) { + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + return -EBUSY; + } + } + + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); + + return 0; +} + +static void s3cmci_send_request(struct mmc_host *mmc) +{ + struct s3cmci_host *host = mmc_priv(mmc); + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = host->cmd_is_stop?mrq->stop:mrq->cmd; + + host->ccnt++; +#ifdef CONFIG_MMC_DEBUG + prepare_dbgmsg(host, cmd, host->cmd_is_stop); +#endif + //Clear command, data and fifo status registers + //Fifo clear only necessary on 2440, but doesn't hurt on 2410 + writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT); + writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA); + writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA); + + if (cmd->data) { + int res; + res = s3cmci_setup_data(host, cmd->data); + + host->dcnt++; + + if (res) { + cmd->error = MMC_ERR_DMA; + cmd->data->error = MMC_ERR_DMA; + + mmc_request_done(mmc, mrq); + return; + } + + + if (host->dodma) { + res = s3cmci_prepare_dma(host, cmd->data); + } else { + res = s3cmci_prepare_pio(host, cmd->data); + } + + if (res) { + cmd->error = MMC_ERR_DMA; + cmd->data->error = MMC_ERR_DMA; + + mmc_request_done(mmc, mrq); + return; + } + + } + + // Send command + s3cmci_send_command(host, cmd); + + // Enable Interrupt + enable_irq(host->irq); +} + +static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct s3cmci_host *host = mmc_priv(mmc); + + host->cmd_is_stop = 0; + host->mrq = mrq; + + s3cmci_send_request(mmc); +} + +static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct s3cmci_host *host = mmc_priv(mmc); + u32 mci_psc, mci_con; + + //Set power + mci_con = readl(host->base + S3C2410_SDICON); + switch(ios->power_mode) { + case MMC_POWER_ON: + case MMC_POWER_UP: + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD); + s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0); + s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); + s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); + s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); + + if (!host->is2440) + mci_con|=S3C2410_SDICON_FIFORESET; + + break; + + case MMC_POWER_OFF: + default: + s3c2410_gpio_setpin(S3C2410_GPE5, 0); + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); + + if (host->is2440) + mci_con|=S3C2440_SDICON_SDRESET; + + break; + } + + //Set clock + for (mci_psc=0; mci_psc<255; mci_psc++) { + host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); + + if (host->real_rate <= ios->clock) + break; + } + + if(mci_psc > 255) mci_psc = 255; + host->prescaler = mci_psc; + + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + //If requested clock is 0, real_rate will be 0, too + if (ios->clock == 0) + host->real_rate = 0; + + //Set CLOCK_ENABLE + if (ios->clock) + mci_con |= S3C2410_SDICON_CLOCKTYPE; + else + mci_con &=~S3C2410_SDICON_CLOCKTYPE; + + writel(mci_con, host->base + S3C2410_SDICON); + + if ((ios->power_mode==MMC_POWER_ON) + || (ios->power_mode==MMC_POWER_UP)) { + + dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n", + host->real_rate/1000, ios->clock/1000); + } else { + dbg(host, dbg_conf, "powered down.\n"); + } + + host->bus_width = ios->bus_width; + +} + +static void s3cmci_reset(struct s3cmci_host *host) +{ + u32 con = readl(host->base + S3C2410_SDICON); + + con |= S3C2440_SDICON_SDRESET; + + writel(con, host->base + S3C2410_SDICON); +} + +static struct mmc_host_ops s3cmci_ops = { + .request = s3cmci_request, + .set_ios = s3cmci_set_ios, +}; + +static int s3cmci_probe(struct platform_device *pdev, int is2440) +{ + struct mmc_host *mmc; + struct s3cmci_host *host; + + int ret; + + mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_out; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdev = pdev; + + spin_lock_init(&host->complete_lock); + tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); + if (is2440) { + host->is2440 = 1; + host->sdiimsk = S3C2440_SDIIMSK; + host->sdidata = S3C2440_SDIDATA; + host->clk_div = 1; + } else { + host->is2440 = 0; + host->sdiimsk = S3C2410_SDIIMSK; + host->sdidata = S3C2410_SDIDATA; + host->clk_div = 2; + } + host->dodma = 0; + host->complete_what = COMPLETION_NONE; + host->pio_active = XFER_NONE; + + host->dma = S3CMCI_DMA; + host->irq_cd = IRQ_EINT2; + + host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!host->mem) { + dev_err(&pdev->dev, + "failed to get io memory region resouce.\n"); + + ret = -ENOENT; + goto probe_free_host; + } + + host->mem = request_mem_region(host->mem->start, + RESSIZE(host->mem), pdev->name); + + if (!host->mem) { + dev_err(&pdev->dev, "failed to request io memory region.\n"); + ret = -ENOENT; + goto probe_free_host; + } + + host->base = ioremap(host->mem->start, RESSIZE(host->mem)); + if (host->base == 0) { + dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); + ret = -EINVAL; + goto probe_free_mem_region; + } + + host->irq = platform_get_irq(pdev, 0); + if (host->irq == 0) { + dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); + ret = -EINVAL; + goto probe_iounmap; + } + + if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) { + dev_err(&pdev->dev, "failed to request mci interrupt.\n"); + ret = -ENOENT; + goto probe_iounmap; + } + + disable_irq(host->irq); + + s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2); + set_irq_type(host->irq_cd, IRQT_BOTHEDGE); + + if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) { + dev_err(&pdev->dev, + "failed to request card detect interrupt.\n"); + + ret = -ENOENT; + goto probe_free_irq; + } + + if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) { + dev_err(&pdev->dev, "unable to get DMA channel.\n"); + ret = -EBUSY; + goto probe_free_irq_cd; + } + + host->clk = clk_get(&pdev->dev, "sdi"); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "failed to find clock source.\n"); + ret = PTR_ERR(host->clk); + host->clk = NULL; + goto probe_free_host; + } + + if ((ret = clk_enable(host->clk))) { + dev_err(&pdev->dev, "failed to enable clock source.\n"); + goto clk_free; + } + + host->clk_rate = clk_get_rate(host->clk); + + mmc->ops = &s3cmci_ops; + mmc->ocr_avail = MMC_VDD_32_33; + mmc->caps = MMC_CAP_4_BIT_DATA; + mmc->f_min = host->clk_rate / (host->clk_div * 256); + mmc->f_max = host->clk_rate / host->clk_div; + + mmc->max_blk_count = 4095; + mmc->max_blk_size = 4095; + mmc->max_req_size = 4095 * 512; + mmc->max_seg_size = mmc->max_req_size; + + mmc->max_phys_segs = 128; + mmc->max_hw_segs = 128; + + dbg(host, dbg_debug, "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n", + (host->is2440?"2440":""), + host->base, host->irq, host->irq_cd, host->dma); + + if ((ret = mmc_add_host(mmc))) { + dev_err(&pdev->dev, "failed to add mmc host.\n"); + goto free_dmabuf; + } + + platform_set_drvdata(pdev, mmc); + + dev_info(&pdev->dev,"initialisation done.\n"); + return 0; + + free_dmabuf: + clk_disable(host->clk); + + clk_free: + clk_put(host->clk); + + probe_free_irq_cd: + free_irq(host->irq_cd, host); + + probe_free_irq: + free_irq(host->irq, host); + + probe_iounmap: + iounmap(host->base); + + probe_free_mem_region: + release_mem_region(host->mem->start, RESSIZE(host->mem)); + + probe_free_host: + mmc_free_host(mmc); + probe_out: + return ret; +} + +static int s3cmci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct s3cmci_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + clk_disable(host->clk); + clk_put(host->clk); + free_irq(host->irq_cd, host); + free_irq(host->irq, host); + iounmap(host->base); + release_mem_region(host->mem->start, RESSIZE(host->mem)); + mmc_free_host(mmc); + + return 0; +} + +static int s3cmci_probe_2410(struct platform_device *dev) +{ + return s3cmci_probe(dev, 0); +} + +static int s3cmci_probe_2412(struct platform_device *dev) +{ + return s3cmci_probe(dev, 1); +} + +static int s3cmci_probe_2440(struct platform_device *dev) +{ + return s3cmci_probe(dev, 1); +} + +#ifdef CONFIG_PM + +static int s3cmci_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + + return mmc_suspend_host(mmc, state); +} + +static int s3cmci_resume(struct platform_device *dev) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + + return mmc_resume_host(mmc); +} + +#else /* CONFIG_PM */ +#define s3cmci_suspend NULL +#define s3cmci_resume NULL +#endif /* CONFIG_PM */ + + +static struct platform_driver s3cmci_driver_2410 = +{ + .driver.name = "s3c2410-sdi", + .probe = s3cmci_probe_2410, + .remove = s3cmci_remove, + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + +static struct platform_driver s3cmci_driver_2412 = +{ + .driver.name = "s3c2412-sdi", + .probe = s3cmci_probe_2412, + .remove = s3cmci_remove, + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + +static struct platform_driver s3cmci_driver_2440 = +{ + .driver.name = "s3c2440-sdi", + .probe = s3cmci_probe_2440, + .remove = s3cmci_remove, + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + + +static int __init s3cmci_init(void) +{ + platform_driver_register(&s3cmci_driver_2410); + platform_driver_register(&s3cmci_driver_2412); + platform_driver_register(&s3cmci_driver_2440); + return 0; +} + +static void __exit s3cmci_exit(void) +{ + platform_driver_unregister(&s3cmci_driver_2410); + platform_driver_unregister(&s3cmci_driver_2412); + platform_driver_unregister(&s3cmci_driver_2440); +} + +module_init(s3cmci_init); +module_exit(s3cmci_exit); + +MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Thomas Kleffel "); + Index: linux-2.6.26-rc5-q/drivers/mmc/host/s3cmci.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.26-rc5-q/drivers/mmc/host/s3cmci.h 2008-06-06 15:24:37.000000000 +0100 @@ -0,0 +1,71 @@ +/* + * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver + * + * Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +//FIXME: DMA Resource management ?! +#define S3CMCI_DMA 0 + +enum s3cmci_waitfor { + COMPLETION_NONE, + COMPLETION_FINALIZE, + COMPLETION_CMDSENT, + COMPLETION_RSPFIN, + COMPLETION_XFERFINISH, + COMPLETION_XFERFINISH_RSPFIN, +}; + +struct s3cmci_host { + struct platform_device *pdev; + struct mmc_host *mmc; + struct resource *mem; + struct clk *clk; + void __iomem *base; + int irq; + int irq_cd; + int dma; + + unsigned long clk_rate; + unsigned long clk_div; + unsigned long real_rate; + u8 prescaler; + + int is2440; + unsigned sdiimsk; + unsigned sdidata; + int dodma; + + volatile int dmatogo; + + struct mmc_request *mrq; + int cmd_is_stop; + + spinlock_t complete_lock; + volatile enum s3cmci_waitfor + complete_what; + + volatile int dma_complete; + + volatile u32 pio_sgptr; + volatile u32 pio_words; + volatile u32 pio_count; + volatile u32 *pio_ptr; +#define XFER_NONE 0 +#define XFER_READ 1 +#define XFER_WRITE 2 + volatile u32 pio_active; + + int bus_width; + + char dbgmsg_cmd[301]; + char dbgmsg_dat[301]; + volatile char *status; + + unsigned int ccnt, dcnt; + struct tasklet_struct pio_tasklet; +}; Index: linux-2.6.26-rc5-q/drivers/mmc/host/Kconfig =================================================================== --- linux-2.6.26-rc5-q.orig/drivers/mmc/host/Kconfig 2008-06-05 15:09:44.000000000 +0100 +++ linux-2.6.26-rc5-q/drivers/mmc/host/Kconfig 2008-06-06 15:08:32.000000000 +0100 @@ -130,3 +130,14 @@ config MMC_SPI If unsure, or if your system has no SPI master driver, say N. +config MMC_S3C + tristate "Samsung S3C SD/MMC Card Interface support" + depends on ARCH_S3C2410 && MMC + help + This selects a driver for the MCI interface found in + Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. + If you have a board based on one of those and a MMC/SD + slot, say Y or M here. + + If unsure, say N. + Index: linux-2.6.26-rc5-q/drivers/mmc/host/Makefile =================================================================== --- linux-2.6.26-rc5-q.orig/drivers/mmc/host/Makefile 2008-05-13 10:13:29.000000000 +0100 +++ linux-2.6.26-rc5-q/drivers/mmc/host/Makefile 2008-06-06 15:25:29.000000000 +0100 @@ -17,4 +17,4 @@ obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o - +obj-$(CONFIG_MMC_S3C) += s3cmci.o -- Ben (ben@fluff.org, http://www.fluff.org/) 'a smiley only costs 4 bytes' -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/