Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753346AbYFJFwj (ORCPT ); Tue, 10 Jun 2008 01:52:39 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750959AbYFJFwa (ORCPT ); Tue, 10 Jun 2008 01:52:30 -0400 Received: from ns1.suse.de ([195.135.220.2]:33242 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750728AbYFJFw3 (ORCPT ); Tue, 10 Jun 2008 01:52:29 -0400 Date: Tue, 10 Jun 2008 07:52:27 +0200 Message-ID: From: Takashi Iwai To: "Rafael J. Wysocki" Cc: LKML , Andrew Morton Subject: Re: 2.6.26-rc5-git2: snd-emu10k1 does not work In-Reply-To: <200806092245.01595.rjw@sisk.pl> References: <200806082303.59245.rjw@sisk.pl> <200806091656.31251.rjw@sisk.pl> <200806092245.01595.rjw@sisk.pl> User-Agent: Wanderlust/2.12.0 (Your Wildest Dreams) SEMI/1.14.6 (Maruoka) FLIM/1.14.7 (=?ISO-8859-4?Q?Sanj=F2?=) APEL/10.6 MULE XEmacs/21.5 (beta28) (fuki) (x86_64-suse-linux) MIME-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2436 Lines: 63 At Mon, 9 Jun 2008 22:45:01 +0200, Rafael J. Wysocki wrote: > > On Monday, 9 of June 2008, Rafael J. Wysocki wrote: > > On Monday, 9 of June 2008, Takashi Iwai wrote: > > > At Sun, 8 Jun 2008 23:03:58 +0200, > > > Rafael J. Wysocki wrote: > > > > > > > > Hi, > > > > > > > > snd-emu10k1 doesn't work on one of my test boxes. The driver apparently loads, > > > > but the card is not visible, for example, to any mixer apps (including the ALSA > > > > mixer). However, YaST correctly detects and reports the card (the system is > > > > openSUSE 10.3, x86-64). The openSUSE-made kernel (2.6.22-something) does > > > > correctly work on the same hardware. > > > > > > > > Is there anything I should pay attention to, like any options related to /proc > > > > or sysfs that could have an effect on the audio adapter? > > > > > > First off, check /proc/asound/cards whether snd-emu10k1 driver is > > > really loaded on the first slot. I guess something else occupies the > > > position. > > > > This is quite possible, as there is an on-board audio in this box too and I'm > > not sure if the setup switch really turns it off. > > > > > If yes, a simple solution is to add the following option for snd module: > > > > > > options snd slots=snd-emu10k1 > > > > > > then the first slot is reserved for emu10k1. Note that this option is > > > available for 2.6.25 or later kernel. > > > > I'll try later today and let you know. > > No, it didn't work. > > Here's what I got from /proc/asound/cards: > > 0 [Audigy ]: Audigy - Audigy 1 [SB0090] > Audigy 1 [SB0090] (rev.3, serial:0x531102) at 0xa000, irq 17 > 1 [UART ]: MPU-401 UART - MPU-401 UART > MPU-401 UART at 0x330, irq 10 > > so I think this is correct, and the "options snd slots=snd-emu10k1" thing had > no visible effect. Then this must be OK. Then the remaining possible problems are: - Device files and permissions. Check whether /dev/snd/* files exist and have proper permissions and ACL (see "getfacl /dev/snd/*") - The default ALSA configuration is hijacked, e.g. via pulse plugin. Try to remove /etc/asound-pulse.conf if present. Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/