Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756688AbYFKVwY (ORCPT ); Wed, 11 Jun 2008 17:52:24 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753117AbYFKVwM (ORCPT ); Wed, 11 Jun 2008 17:52:12 -0400 Received: from moutng.kundenserver.de ([212.227.126.179]:52672 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752488AbYFKVwH (ORCPT ); Wed, 11 Jun 2008 17:52:07 -0400 Subject: Lenovo ThinkCentre A55: parport_pc 00:0a: disabled; probe of 00:0a failed with error -22 From: Malte Cornils To: linux-kernel@vger.kernel.org Content-Type: text/plain Date: Wed, 11 Jun 2008 23:52:01 +0200 Message-Id: <1213221122.20453.26.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.22.2 Content-Transfer-Encoding: 7bit X-Provags-ID: V01U2FsdGVkX1/9tsUIREkxLABB3czeigxAS8vxm9nvQiht4AP lGu7UsBeDmZx10h651/uYZ2yX41uf5gViCyfg4DqKktyi10Hxl tjJHYcjyTQVFDJCmHbIYQ== Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31547 Lines: 657 Hello LKML readers, a friend of mine is unable to print on her system. I could trace that to the kernel not finding the parallel port on the system. Windows Vista, for whatever that's worth, prints fine. dmesg says: [ 40.935843] parport_pc 00:0a: disabled [ 40.935850] parport_pc: probe of 00:0a failed with error -22 rmmod parport_pc ; modprobe parport_pc io=0x378 irq=none did not work either, the detection failed and echoing some bytes to the /dev/lp0 device fails, too. Booting with noapic or pci=routeirq did not help, booting with noacpi nolapic generated in the system grinding to a halt, which made getting information out of it difficult due to the remote telephone debugging. The parallel port is activated in the BIOS normally (IO=0x378, IRQ=7, ECP/EPP DMA channel 3) On a related note, the sound card does not work either, but this is not so important for her at the moment. This is on a Ubuntu hardy system with kernel 2.6.24-18-generic. Unfortunately, I was not able to run through the full gamut of debugging information with her via phone support (dmidecode, lspci -vvv, ...), but I'll be able and happy to fetch specific information. The full dmesg output of the system bootup can be found below. Any hints, workarounds, debug possibilities? Should we try a 2.6.25 or better a kernel from current Linus git? Does https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/103098 look relevant? Something else: Lenovo provides a somewhat more recent BIOS, but the Flash ISO image didn't work because I was unable to change the boot priority via phone (does anyone have a screenshot of the specific BIOS option? *sigh*) and the Windows-.exe-Flasher errored out under Vista. And the box doesn't have a floppy disk drive, of course. Well. http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-66778 http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68943 We have BIOS version 23A IIRC. Any ideas? Yours -Malte Cornils ---- snip ---- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 (Ubuntu 2.6.24-18.32-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f68f000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f68f000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7070 [ 0.000000] Entering add_active_range(0, 0, 521856) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521856 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521856 [ 0.000000] On node 0 totalpages: 521856 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290195 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6EC0 checksum 0 [ 0.000000] ACPI: RSDP 000F6EC0, 0014 (r0 LENOVO) [ 0.000000] ACPI: RSDT 7F68763F, 0040 (r1 LENOVO TC-2O 43 LTP 0) [ 0.000000] ACPI: FACP 7F68ED18, 0074 (r1 LENOVO TC-2O 43 PTL 3) [ 0.000000] ACPI: DSDT 7F688EB1, 5E67 (r1 INTEL BR_2OTER 43 MSFT 100000E) [ 0.000000] ACPI: FACS 7F691FC0, 0040 [ 0.000000] ACPI: TCPA 7F68ED8C, 0032 (r2 LENOVO THI2OCEN 43 PTL 1) [ 0.000000] ACPI: SLIC 7F68EDBE, 0176 (r1 LENOVO TC-2O 43 LTP 0) [ 0.000000] ACPI: MCFG 7F68EF34, 003C (r1 PTLTD M2OG 43 LTP 0) [ 0.000000] ACPI: APIC 7F68EF70, 0068 (r1 PTLTD A2OC 43 LTP 0) [ 0.000000] ACPI: BOOT 7F68EFD8, 0028 (r1 PTLTD $SB2OBL$ 43 LTP 1) [ 0.000000] ACPI: SSDT 7F68767F, 13EC (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517779 [ 0.000000] Kernel command line: root=UUID=f87fbec5-b40d-4b7e-b61d-33c93e54d860 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1596.028 MHz processor. [ 27.144951] Console: colour VGA+ 80x25 [ 27.144955] console [tty0] enabled [ 27.145186] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 27.145451] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 27.245628] Memory: 2057516k/2087424k available (2176k kernel code, 28628k reserved, 1006k data, 368k init, 1169920k highmem) [ 27.245636] virtual kernel memory layout: [ 27.245638] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 27.245639] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 27.245640] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 27.245641] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 27.245642] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 27.245643] .data : 0xc03201f4 - 0xc041bdc4 (1006 kB) [ 27.245644] .text : 0xc0100000 - 0xc03201f4 (2176 kB) [ 27.245648] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 27.245691] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 27.325641] Calibrating delay using timer specific routine.. 3194.87 BogoMIPS (lpj=6389744) [ 27.325667] Security Framework initialized [ 27.325673] SELinux: Disabled at boot. [ 27.325686] AppArmor: AppArmor initialized [ 27.325691] Failure registering capabilities with primary security module. [ 27.325700] Mount-cache hash table entries: 512 [ 27.325827] Initializing cgroup subsys ns [ 27.325832] Initializing cgroup subsys cpuacct [ 27.325842] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 27.325851] monitor/mwait feature present. [ 27.325853] using mwait in idle threads. [ 27.325857] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.325859] CPU: L2 cache: 1024K [ 27.325862] CPU: Physical Processor ID: 0 [ 27.325863] CPU: Processor Core ID: 0 [ 27.325865] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 27.325874] Compat vDSO mapped to ffffe000. [ 27.325888] Checking 'hlt' instruction... OK. [ 27.342073] SMP alternatives: switching to UP code [ 27.343806] Early unpacking initramfs... done [ 27.701170] ACPI: Core revision 20070126 [ 27.701217] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.705896] CPU0: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping 0d [ 27.705914] SMP alternatives: switching to SMP code [ 27.706680] Booting processor 1/1 eip 3000 [ 27.716742] Initializing CPU#1 [ 27.797222] Calibrating delay using timer specific routine.. 3192.22 BogoMIPS (lpj=6384448) [ 27.797229] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 27.797234] monitor/mwait feature present. [ 27.797237] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.797239] CPU: L2 cache: 1024K [ 27.797241] CPU: Physical Processor ID: 0 [ 27.797243] CPU: Processor Core ID: 1 [ 27.797244] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 27.797721] CPU1: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping 0d [ 27.797742] Total of 2 processors activated (6387.09 BogoMIPS). [ 27.797888] ENABLING IO-APIC IRQs [ 27.798056] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 27.945213] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 27.965212] Brought up 2 CPUs [ 27.965236] CPU0 attaching sched-domain: [ 27.965239] domain 0: span 03 [ 27.965241] groups: 01 02 [ 27.965244] CPU1 attaching sched-domain: [ 27.965246] domain 0: span 03 [ 27.965248] groups: 02 01 [ 27.965481] net_namespace: 64 bytes [ 27.965488] Booting paravirtualized kernel on bare hardware [ 27.965957] Time: 22:59:22 Date: 06/11/08 [ 27.965983] NET: Registered protocol family 16 [ 27.966172] EISA bus registered [ 27.966177] ACPI: bus type pci registered [ 27.972198] PCI: BIOS BUG #81[49435000] found [ 27.972235] PCI: Using configuration type 1 [ 27.972237] Setting up standard PCI resources [ 27.977555] ACPI: EC: Look up EC in DSDT [ 27.980681] ACPI: Interpreter enabled [ 27.980687] ACPI: (supports S0 S1 S3 S4 S5) [ 27.980702] ACPI: Using IOAPIC for interrupt routing [ 27.985866] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.986471] Force enabled HPET at base address 0xfed00000 [ 27.986477] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 27.986481] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 27.986953] PCI: Transparent bridge - 0000:00:1e.0 [ 27.986983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.987254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT] [ 27.987372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 27.987489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 27.987605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 27.994783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15) [ 27.994877] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15) [ 27.994967] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5 [ 27.995057] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15) [ 27.995149] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled. [ 27.995243] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. [ 27.995336] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 10 11 14 15) [ 27.995428] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *10 11 14 15) [ 27.995569] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.995599] pnp: PnP ACPI init [ 27.995607] ACPI: bus type pnp registered [ 27.999731] pnp: PnP ACPI: found 12 devices [ 27.999734] ACPI: ACPI bus type pnp unregistered [ 27.999738] PnPBIOS: Disabled by ACPI PNP [ 27.999964] PCI: Using ACPI for IRQ routing [ 27.999967] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.999971] PCI: Cannot allocate resource region 7 of bridge 0000:00:01.0 [ 27.999973] PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0 [ 27.999975] PCI: Cannot allocate resource region 9 of bridge 0000:00:01.0 [ 27.999982] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 27.999984] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 27.999987] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 28.021117] NET: Registered protocol family 8 [ 28.021120] NET: Registered protocol family 20 [ 28.021292] hpet clockevent registered [ 28.021297] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 28.021302] hpet0: 3 64-bit timers, 14318180 Hz [ 28.022339] AppArmor: AppArmor Filesystem Enabled [ 28.025102] Time: tsc clocksource has been installed. [ 28.041177] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 28.041181] system 00:01: ioport range 0x290-0x29f has been reserved [ 28.041185] system 00:01: ioport range 0x800-0x87f has been reserved [ 28.041190] system 00:01: ioport range 0x880-0x88f has been reserved [ 28.041194] system 00:01: ioport range 0x400-0x4bf has been reserved [ 28.041198] system 00:01: ioport range 0x600-0x63f has been reserved [ 28.041201] system 00:01: ioport range 0x900-0x90f has been reserved [ 28.041205] system 00:01: ioport range 0x1000-0x107f has been reserved [ 28.041208] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 28.041212] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 28.041216] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 28.041220] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 28.041224] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 28.041228] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 28.041231] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved [ 28.041235] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved [ 28.071640] PCI: Bridge: 0000:00:01.0 [ 28.071642] IO window: disabled. [ 28.071646] MEM window: disabled. [ 28.071648] PREFETCH window: disabled. [ 28.071652] PCI: Bridge: 0000:00:1c.0 [ 28.071653] IO window: disabled. [ 28.071657] MEM window: disabled. [ 28.071660] PREFETCH window: disabled. [ 28.071665] PCI: Bridge: 0000:00:1c.1 [ 28.071666] IO window: disabled. [ 28.071671] MEM window: d0100000-d01fffff [ 28.071674] PREFETCH window: disabled. [ 28.071679] PCI: Bridge: 0000:00:1e.0 [ 28.071680] IO window: disabled. [ 28.071684] MEM window: disabled. [ 28.071688] PREFETCH window: disabled. [ 28.071705] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 28.071711] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 28.071729] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 28.071735] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 28.071752] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 28.071757] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 28.071767] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 28.071779] NET: Registered protocol family 2 [ 28.113255] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 28.113501] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 28.113986] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 28.114312] TCP: Hash tables configured (established 131072 bind 65536) [ 28.114315] TCP reno registered [ 28.125389] checking if image is initramfs... it is [ 28.596904] Switched to high resolution mode on CPU 1 [ 28.600780] Switched to high resolution mode on CPU 0 [ 28.909796] Freeing initrd memory: 7309k freed [ 28.909949] Simple Boot Flag at 0x35 set to 0x1 [ 28.910560] audit: initializing netlink socket (disabled) [ 28.910574] audit(1213225162.544:1): initialized [ 28.910777] highmem bounce pool size: 64 pages [ 28.912749] VFS: Disk quotas dquot_6.5.1 [ 28.912826] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 28.912954] io scheduler noop registered [ 28.912956] io scheduler anticipatory registered [ 28.912958] io scheduler deadline registered [ 28.912969] io scheduler cfq registered (default) [ 28.912981] Boot video device is 0000:00:02.0 [ 28.913149] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 28.913187] assign_interrupt_mode Found MSI capability [ 28.913217] Allocate Port Service[0000:00:01.0:pcie00] [ 28.913296] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 28.913336] assign_interrupt_mode Found MSI capability [ 28.913369] Allocate Port Service[0000:00:1c.0:pcie00] [ 28.913401] Allocate Port Service[0000:00:1c.0:pcie02] [ 28.913479] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 28.913519] assign_interrupt_mode Found MSI capability [ 28.913552] Allocate Port Service[0000:00:1c.1:pcie00] [ 28.913584] Allocate Port Service[0000:00:1c.1:pcie02] [ 28.913815] isapnp: Scanning for PnP cards... [ 29.266840] isapnp: No Plug & Play device found [ 29.292687] Real Time Clock Driver v1.12ac [ 29.292794] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 29.292914] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 29.293595] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 29.294353] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 29.294431] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 29.294535] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 29.294840] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 29.294844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 29.323947] mice: PS/2 mouse device common for all mice [ 29.324079] EISA: Probing bus 0 at eisa.0 [ 29.324085] Cannot allocate resource for EISA slot 1 [ 29.324110] EISA: Detected 0 cards. [ 29.324112] cpuidle: using governor ladder [ 29.324114] cpuidle: using governor menu [ 29.324196] NET: Registered protocol family 1 [ 29.324226] Using IPI No-Shortcut mode [ 29.324253] registered taskstats version 1 [ 29.324341] Magic number: 12:602:1007 [ 29.324346] hash matches device ttye6 [ 29.324398] hash matches device 00:09 [ 29.324411] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 29.324413] EDD information not available. [ 29.324557] Freeing unused kernel memory: 368k freed [ 29.344221] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 30.569463] fuse init (API version 7.9) [ 30.592178] ACPI: SSDT 7F688A6B, 017C (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 30.592667] ACPI: SSDT 7F688BE7, 0066 (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 30.592849] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 30.592860] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 30.592872] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 30.592882] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 30.592891] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 30.592902] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 30.967157] usbcore: registered new interface driver usbfs [ 30.967181] usbcore: registered new interface driver hub [ 30.967847] tg3.c:v3.86 (November 9, 2007) [ 30.967870] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 30.967881] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 30.971293] usbcore: registered new device driver usb [ 30.987726] eth0: Tigon3 [partno(BCM95786) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:01:6c:9a:91:c0 [ 30.987734] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 30.987737] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 30.987805] USB Universal Host Controller Interface driver v3.0 [ 30.987858] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 30.987867] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 30.987871] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 30.988082] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 30.988112] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001800 [ 30.988254] usb usb1: configuration #1 chosen from 1 choice [ 30.988280] hub 1-0:1.0: USB hub found [ 30.988286] hub 1-0:1.0: 2 ports detected [ 31.005806] SCSI subsystem initialized [ 31.080463] libata version 3.00 loaded. [ 31.091215] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 31.091227] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 31.091231] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 31.091260] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 31.091286] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 31.091411] usb usb2: configuration #1 chosen from 1 choice [ 31.091435] hub 2-0:1.0: USB hub found [ 31.091440] hub 2-0:1.0: 2 ports detected [ 31.145689] FDC 0 is a post-1991 82077 [ 31.195090] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 31.195102] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 31.195106] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 31.195131] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 31.195158] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001840 [ 31.195275] usb usb3: configuration #1 chosen from 1 choice [ 31.195301] hub 3-0:1.0: USB hub found [ 31.195306] hub 3-0:1.0: 2 ports detected [ 31.298984] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 31.298996] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 31.299001] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 31.299027] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 31.299056] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 31.299171] usb usb4: configuration #1 chosen from 1 choice [ 31.299195] hub 4-0:1.0: USB hub found [ 31.299200] hub 4-0:1.0: 2 ports detected [ 31.402928] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 [ 31.402943] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 31.402947] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 31.402974] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 31.406871] ehci_hcd 0000:00:1d.7: debug port 1 [ 31.406877] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 31.406885] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd0404000 [ 31.434758] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 31.446741] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 31.446867] usb usb5: configuration #1 chosen from 1 choice [ 31.446895] hub 5-0:1.0: USB hub found [ 31.446902] hub 5-0:1.0: 8 ports detected [ 31.567782] ata_piix 0000:00:1f.2: version 2.12 [ 31.567790] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 31.721506] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 31.721544] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 31.721635] scsi0 : ata_piix [ 31.721835] scsi1 : ata_piix [ 31.722619] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 [ 31.722622] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 [ 31.797412] usb 5-4: new high speed USB device using ehci_hcd and address 2 [ 31.902967] ata1.00: ATA-7: WDC WD1600AAJS-08PSA0, 05.06H05, max UDMA/133 [ 31.902974] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 31.918693] ata1.00: configured for UDMA/133 [ 31.928683] usb 5-4: configuration #1 chosen from 1 choice [ 31.943573] usbcore: registered new interface driver libusual [ 31.949130] Initializing USB Mass Storage driver... [ 31.949210] scsi2 : SCSI emulation for USB Mass Storage devices [ 31.949274] usbcore: registered new interface driver usb-storage [ 31.949277] USB Mass Storage support registered. [ 31.949373] usb-storage: device found at 2 [ 31.949375] usb-storage: waiting for device to settle before scanning [ 32.253294] ata2.00: ATAPI: ATAPI DVD A DH16A1P, RL33, max UDMA/33 [ 32.441050] ata2.00: configured for UDMA/33 [ 32.441177] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5 [ 32.442277] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16A1P RL33 PQ: 0 ANSI: 5 [ 32.451696] Driver 'sd' needs updating - please use bus_type methods [ 32.451782] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 32.451795] sd 0:0:0:0: [sda] Write Protect is off [ 32.451797] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.451815] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.451863] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 32.451874] sd 0:0:0:0: [sda] Write Protect is off [ 32.451876] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.451893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.451896] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 32.460631] sda1 sda2 sda3 sda4 < sda5 > [ 32.498549] sd 0:0:0:0: [sda] Attached SCSI disk [ 32.502155] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 32.502159] Uniform CD-ROM driver Revision: 3.20 [ 32.502215] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 32.503986] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 32.504009] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 32.943889] Attempting manual resume [ 32.943892] swsusp: Resume From Partition 8:5 [ 32.943894] PM: Checking swsusp image. [ 32.944072] PM: Resume from disk failed. [ 32.987094] kjournald starting. Commit interval 5 seconds [ 32.987104] EXT3-fs: mounted filesystem with ordered data mode. [ 36.944620] usb-storage: device scan complete [ 36.947995] scsi 2:0:0:0: Direct-Access TOSHIBA MK1637GSX PQ: 0 ANSI: 2 [ 36.969446] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 36.971690] sd 2:0:0:0: [sdb] Write Protect is off [ 36.971693] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 36.971697] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 36.992796] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 36.995043] sd 2:0:0:0: [sdb] Write Protect is off [ 36.995046] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 36.995048] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 36.995052] sdb: sdb1 [ 37.295236] sd 2:0:0:0: [sdb] Attached SCSI disk [ 37.295291] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 40.108482] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 40.344721] iTCO_vendor_support: vendor-support=0 [ 40.374572] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 40.395256] Linux agpgart interface v0.102 [ 40.414026] agpgart: Detected an Intel 946GZ Chipset. [ 40.414599] agpgart: Detected 7676K stolen memory. [ 40.426983] agpgart: AGP aperture is 256M @ 0xc0000000 [ 40.430938] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 40.449098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.490266] input: Power Button (FF) as /devices/virtual/input/input3 [ 40.533862] ACPI: Power Button (FF) [PWRF] [ 40.533949] input: Power Button (CM) as /devices/virtual/input/input4 [ 40.589808] ACPI: Power Button (CM) [PWRB] [ 40.875181] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 40.935555] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x1060) [ 40.935588] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 40.935843] parport_pc 00:0a: disabled [ 40.935850] parport_pc: probe of 00:0a failed with error -22 [ 41.005505] intel_rng: FWH not detected [ 41.528989] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 41.529017] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 42.567818] lp: driver loaded but no devices found [ 42.629986] Adding 1791208k swap on /dev/sda5. Priority:-1 extents:1 across:1791208k [ 43.180329] EXT3 FS on sda3, internal journal [ 44.346624] ip_tables: (C) 2000-2006 Netfilter Core Team [ 44.866759] No dock devices found. [ 45.969512] ppdev: user-space parallel port driver [ 46.140803] audit(1213217979.687:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4884 profile="/usr/sbin/cupsd" namespace="default" [ 46.379333] apm: BIOS not found. [ 51.040277] Bluetooth: Core ver 2.11 [ 51.040536] NET: Registered protocol family 31 [ 51.040540] Bluetooth: HCI device and connection manager initialized [ 51.040545] Bluetooth: HCI socket layer initialized [ 51.091238] Bluetooth: L2CAP ver 2.9 [ 51.091244] Bluetooth: L2CAP socket layer initialized [ 51.161509] Bluetooth: RFCOMM socket layer initialized [ 51.161524] Bluetooth: RFCOMM TTY layer initialized [ 51.161526] Bluetooth: RFCOMM ver 1.8 [ 52.657237] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 52.657243] tg3: eth0: Flow control is on for TX and on for RX. [ 53.788824] [drm] Initialized drm 1.1.0 20060810 [ 53.791207] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 53.791217] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 53.791283] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 54.828010] NET: Registered protocol family 17 [ 57.350332] NET: Registered protocol family 10 [ 57.350841] lo: Disabled Privacy Extensions [ 67.735107] eth0: no IPv6 routers present [ 80.747421] UDF-fs: No VRS found -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/