Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759239AbYFLTLx (ORCPT ); Thu, 12 Jun 2008 15:11:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756165AbYFLTLp (ORCPT ); Thu, 12 Jun 2008 15:11:45 -0400 Received: from mail-wa4.bigfish.com ([216.32.181.114]:52234 "EHLO mail154-wa4-R.bigfish.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754593AbYFLTLn (ORCPT ); Thu, 12 Jun 2008 15:11:43 -0400 X-BigFish: VPS0(zz1fa4Lzz10d3izzz32i43j66h) X-Spam-TCS-SCL: 5:0 X-FB-DOMAIN-IP-MATCH: fail X-MS-Exchange-Organization-Antispam-Report: OrigIP: 163.181.251.8;Service: EHS X-WSS-ID: 0K2D580-01-6HC-01 From: Robert Richter To: Arjan van de Ven Cc: Yinghai Lu , Thomas Gleixner , Ingo Molnar , LKML , Andi Kleen , Robert Richter Subject: [PATCH 1/2] x86/pci: Renaming k8-bus_64.c to amd_bus.c Date: Thu, 12 Jun 2008 20:19:22 +0200 Message-Id: <1213294763-19566-1-git-send-email-robert.richter@amd.com> X-Mailer: git-send-email 1.5.5.3 In-Reply-To: <20080603072550.GR23679@erda.amd.com> References: <20080603072550.GR23679@erda.amd.com> X-OriginalArrivalTime: 12 Jun 2008 18:40:21.0204 (UTC) FILETIME=[C4C1B940:01C8CCBB] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 26331 Lines: 1099 The name fits better since this is code not only for K8. Signed-off-by: Robert Richter --- arch/x86/pci/Makefile_64 | 2 +- arch/x86/pci/amd_bus.c | 528 ++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/pci/k8-bus_64.c | 528 ---------------------------------------------- 3 files changed, 529 insertions(+), 529 deletions(-) create mode 100644 arch/x86/pci/amd_bus.c delete mode 100644 arch/x86/pci/k8-bus_64.c diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64 index 8fbd198..fd47068 100644 --- a/arch/x86/pci/Makefile_64 +++ b/arch/x86/pci/Makefile_64 @@ -13,5 +13,5 @@ obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o -obj-y += k8-bus_64.o +obj-y += amd_bus.o diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c new file mode 100644 index 0000000..5c2799c --- /dev/null +++ b/arch/x86/pci/amd_bus.c @@ -0,0 +1,528 @@ +#include +#include +#include +#include +#include +#include + +/* + * This discovers the pcibus <-> node mapping on AMD K8. + * also get peer root bus resource for io,mmio + */ + + +/* + * sub bus (transparent) will use entres from 3 to store extra from root, + * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES? + */ +#define RES_NUM 16 +struct pci_root_info { + char name[12]; + unsigned int res_num; + struct resource res[RES_NUM]; + int bus_min; + int bus_max; + int node; + int link; +}; + +/* 4 at this time, it may become to 32 */ +#define PCI_ROOT_NR 4 +static int pci_root_num; +static struct pci_root_info pci_root_info[PCI_ROOT_NR]; + +#ifdef CONFIG_NUMA + +#define BUS_NR 256 + +static int mp_bus_to_node[BUS_NR]; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node = -1; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return node; + + node = mp_bus_to_node[busnum]; + + /* + * let numa_node_id to decide it later in dma_alloc_pages + * if there is no ram on that node + */ + if (node != -1 && !node_online(node)) + node = -1; + + return node; +} +#endif + +void set_pci_bus_resources_arch_default(struct pci_bus *b) +{ + int i; + int j; + struct pci_root_info *info; + + /* if only one root bus, don't need to anything */ + if (pci_root_num < 2) + return; + + for (i = 0; i < pci_root_num; i++) { + if (pci_root_info[i].bus_min == b->number) + break; + } + + if (i == pci_root_num) + return; + + info = &pci_root_info[i]; + for (j = 0; j < info->res_num; j++) { + struct resource *res; + struct resource *root; + + res = &info->res[j]; + b->resource[j] = res; + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + else + root = &iomem_resource; + insert_resource(root, res); + } +} + +#define RANGE_NUM 16 + +struct res_range { + size_t start; + size_t end; +}; + +static void __init update_range(struct res_range *range, size_t start, + size_t end) +{ + int i; + int j; + + for (j = 0; j < RANGE_NUM; j++) { + if (!range[j].end) + continue; + + if (start <= range[j].start && end >= range[j].end) { + range[j].start = 0; + range[j].end = 0; + continue; + } + + if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { + range[j].start = end + 1; + continue; + } + + + if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { + range[j].end = start - 1; + continue; + } + + if (start > range[j].start && end < range[j].end) { + /* find the new spare */ + for (i = 0; i < RANGE_NUM; i++) { + if (range[i].end == 0) + break; + } + if (i < RANGE_NUM) { + range[i].end = range[j].end; + range[i].start = end + 1; + } else { + printk(KERN_ERR "run of slot in ranges\n"); + } + range[j].end = start - 1; + continue; + } + } +} + +static void __init update_res(struct pci_root_info *info, size_t start, + size_t end, unsigned long flags, int merge) +{ + int i; + struct resource *res; + + if (!merge) + goto addit; + + /* try to merge it with old one */ + for (i = 0; i < info->res_num; i++) { + size_t final_start, final_end; + size_t common_start, common_end; + + res = &info->res[i]; + if (res->flags != flags) + continue; + + common_start = max((size_t)res->start, start); + common_end = min((size_t)res->end, end); + if (common_start > common_end + 1) + continue; + + final_start = min((size_t)res->start, start); + final_end = max((size_t)res->end, end); + + res->start = final_start; + res->end = final_end; + return; + } + +addit: + + /* need to add that */ + if (info->res_num >= RES_NUM) + return; + + res = &info->res[info->res_num]; + res->name = info->name; + res->flags = flags; + res->start = start; + res->end = end; + res->child = NULL; + info->res_num++; +} + +struct pci_hostbridge_probe { + u32 bus; + u32 slot; + u32 vendor; + u32 device; +}; + +static struct pci_hostbridge_probe pci_probes[] __initdata = { + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, + { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, +}; + +static u64 __initdata fam10h_mmconf_start; +static u64 __initdata fam10h_mmconf_end; +static void __init get_pci_mmcfg_amd_fam10h_range(void) +{ + u32 address; + u64 base, msr; + unsigned segn_busn_bits; + + /* assume all cpus from fam10h have mmconf */ + if (boot_cpu_data.x86 < 0x10) + return; + + address = MSR_FAM10H_MMIO_CONF_BASE; + rdmsrl(address, msr); + + /* mmconfig is not enable */ + if (!(msr & FAM10H_MMIO_CONF_ENABLE)) + return; + + base = msr & (FAM10H_MMIO_CONF_BASE_MASK<> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & + FAM10H_MMIO_CONF_BUSRANGE_MASK; + + fam10h_mmconf_start = base; + fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; +} + +/** + * early_fill_mp_bus_to_node() + * called before pcibios_scan_root and pci_scan_bus + * fills the mp_bus_to_cpumask array based according to the LDT Bus Number + * Registers found in the K8 northbridge + */ +static int __init early_fill_mp_bus_info(void) +{ + int i; + int j; + unsigned bus; + unsigned slot; + int found; + int node; + int link; + int def_node; + int def_link; + struct pci_root_info *info; + u32 reg; + struct resource *res; + size_t start; + size_t end; + struct res_range range[RANGE_NUM]; + u64 val; + u32 address; + +#ifdef CONFIG_NUMA + for (i = 0; i < BUS_NR; i++) + mp_bus_to_node[i] = -1; +#endif + + if (!early_pci_allowed()) + return -1; + + found = 0; + for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { + u32 id; + u16 device; + u16 vendor; + + bus = pci_probes[i].bus; + slot = pci_probes[i].slot; + id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); + + vendor = id & 0xffff; + device = (id>>16) & 0xffff; + if (pci_probes[i].vendor == vendor && + pci_probes[i].device == device) { + found = 1; + break; + } + } + + if (!found) + return 0; + + pci_root_num = 0; + for (i = 0; i < 4; i++) { + int min_bus; + int max_bus; + reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); + + /* Check if that register is enabled for bus range */ + if ((reg & 7) != 3) + continue; + + min_bus = (reg >> 16) & 0xff; + max_bus = (reg >> 24) & 0xff; + node = (reg >> 4) & 0x07; +#ifdef CONFIG_NUMA + for (j = min_bus; j <= max_bus; j++) + mp_bus_to_node[j] = (unsigned char) node; +#endif + link = (reg >> 8) & 0x03; + + info = &pci_root_info[pci_root_num]; + info->bus_min = min_bus; + info->bus_max = max_bus; + info->node = node; + info->link = link; + sprintf(info->name, "PCI Bus #%02x", min_bus); + pci_root_num++; + } + + /* get the default node and link for left over res */ + reg = read_pci_config(bus, slot, 0, 0x60); + def_node = (reg >> 8) & 0x07; + reg = read_pci_config(bus, slot, 0, 0x64); + def_link = (reg >> 8) & 0x03; + + memset(range, 0, sizeof(range)); + range[0].end = 0xffff; + /* io port resource */ + for (i = 0; i < 4; i++) { + reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); + if (!(reg & 3)) + continue; + + start = reg & 0xfff000; + reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3)); + node = reg & 0x07; + link = (reg >> 4) & 0x03; + end = (reg & 0xfff000) | 0xfff; + + /* find the position */ + for (j = 0; j < pci_root_num; j++) { + info = &pci_root_info[j]; + if (info->node == node && info->link == link) + break; + } + if (j == pci_root_num) + continue; /* not found */ + + info = &pci_root_info[j]; + printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", + node, link, (u64)start, (u64)end); + + /* kernel only handle 16 bit only */ + if (end > 0xffff) + end = 0xffff; + update_res(info, start, end, IORESOURCE_IO, 1); + update_range(range, start, end); + } + /* add left over io port range to def node/link, [0, 0xffff] */ + /* find the position */ + for (j = 0; j < pci_root_num; j++) { + info = &pci_root_info[j]; + if (info->node == def_node && info->link == def_link) + break; + } + if (j < pci_root_num) { + info = &pci_root_info[j]; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + + update_res(info, range[i].start, range[i].end, + IORESOURCE_IO, 1); + } + } + + memset(range, 0, sizeof(range)); + /* 0xfd00000000-0xffffffffff for HT */ + range[0].end = (0xfdULL<<32) - 1; + + /* need to take out [0, TOM) for RAM*/ + address = MSR_K8_TOP_MEM1; + rdmsrl(address, val); + end = (val & 0xffffff8000000ULL); + printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); + if (end < (1ULL<<32)) + update_range(range, 0, end - 1); + + /* get mmconfig */ + get_pci_mmcfg_amd_fam10h_range(); + /* need to take out mmconf range */ + if (fam10h_mmconf_end) { + printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); + update_range(range, fam10h_mmconf_start, fam10h_mmconf_end); + } + + /* mmio resource */ + for (i = 0; i < 8; i++) { + reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); + if (!(reg & 3)) + continue; + + start = reg & 0xffffff00; /* 39:16 on 31:8*/ + start <<= 8; + reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); + node = reg & 0x07; + link = (reg >> 4) & 0x03; + end = (reg & 0xffffff00); + end <<= 8; + end |= 0xffff; + + /* find the position */ + for (j = 0; j < pci_root_num; j++) { + info = &pci_root_info[j]; + if (info->node == node && info->link == link) + break; + } + if (j == pci_root_num) + continue; /* not found */ + + info = &pci_root_info[j]; + + printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", + node, link, (u64)start, (u64)end); + /* + * some sick allocation would have range overlap with fam10h + * mmconf range, so need to update start and end. + */ + if (fam10h_mmconf_end) { + int changed = 0; + u64 endx = 0; + if (start >= fam10h_mmconf_start && + start <= fam10h_mmconf_end) { + start = fam10h_mmconf_end + 1; + changed = 1; + } + + if (end >= fam10h_mmconf_start && + end <= fam10h_mmconf_end) { + end = fam10h_mmconf_start - 1; + changed = 1; + } + + if (start < fam10h_mmconf_start && + end > fam10h_mmconf_end) { + /* we got a hole */ + endx = fam10h_mmconf_start - 1; + update_res(info, start, endx, IORESOURCE_MEM, 0); + update_range(range, start, endx); + printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx); + start = fam10h_mmconf_end + 1; + changed = 1; + } + if (changed) { + if (start <= end) { + printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end); + } else { + printk(KERN_CONT "%s\n", endx?"":" ==> none"); + continue; + } + } + } + + update_res(info, start, end, IORESOURCE_MEM, 1); + update_range(range, start, end); + printk(KERN_CONT "\n"); + } + + /* need to take out [4G, TOM2) for RAM*/ + /* SYS_CFG */ + address = MSR_K8_SYSCFG; + rdmsrl(address, val); + /* TOP_MEM2 is enabled? */ + if (val & (1<<21)) { + /* TOP_MEM2 */ + address = MSR_K8_TOP_MEM2; + rdmsrl(address, val); + end = (val & 0xffffff8000000ULL); + printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); + update_range(range, 1ULL<<32, end - 1); + } + + /* + * add left over mmio range to def node/link ? + * that is tricky, just record range in from start_min to 4G + */ + for (j = 0; j < pci_root_num; j++) { + info = &pci_root_info[j]; + if (info->node == def_node && info->link == def_link) + break; + } + if (j < pci_root_num) { + info = &pci_root_info[j]; + + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + + update_res(info, range[i].start, range[i].end, + IORESOURCE_MEM, 1); + } + } + + for (i = 0; i < pci_root_num; i++) { + int res_num; + int busnum; + + info = &pci_root_info[i]; + res_num = info->res_num; + busnum = info->bus_min; + printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n", + info->bus_min, info->bus_max, info->node, info->link); + for (j = 0; j < res_num; j++) { + res = &info->res[j]; + printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n", + busnum, j, + (res->flags & IORESOURCE_IO)?"io port":"mmio", + res->start, res->end); + } + } + + return 0; +} + +postcore_initcall(early_fill_mp_bus_info); diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c deleted file mode 100644 index 5c2799c..0000000 --- a/arch/x86/pci/k8-bus_64.c +++ /dev/null @@ -1,528 +0,0 @@ -#include -#include -#include -#include -#include -#include - -/* - * This discovers the pcibus <-> node mapping on AMD K8. - * also get peer root bus resource for io,mmio - */ - - -/* - * sub bus (transparent) will use entres from 3 to store extra from root, - * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES? - */ -#define RES_NUM 16 -struct pci_root_info { - char name[12]; - unsigned int res_num; - struct resource res[RES_NUM]; - int bus_min; - int bus_max; - int node; - int link; -}; - -/* 4 at this time, it may become to 32 */ -#define PCI_ROOT_NR 4 -static int pci_root_num; -static struct pci_root_info pci_root_info[PCI_ROOT_NR]; - -#ifdef CONFIG_NUMA - -#define BUS_NR 256 - -static int mp_bus_to_node[BUS_NR]; - -void set_mp_bus_to_node(int busnum, int node) -{ - if (busnum >= 0 && busnum < BUS_NR) - mp_bus_to_node[busnum] = node; -} - -int get_mp_bus_to_node(int busnum) -{ - int node = -1; - - if (busnum < 0 || busnum > (BUS_NR - 1)) - return node; - - node = mp_bus_to_node[busnum]; - - /* - * let numa_node_id to decide it later in dma_alloc_pages - * if there is no ram on that node - */ - if (node != -1 && !node_online(node)) - node = -1; - - return node; -} -#endif - -void set_pci_bus_resources_arch_default(struct pci_bus *b) -{ - int i; - int j; - struct pci_root_info *info; - - /* if only one root bus, don't need to anything */ - if (pci_root_num < 2) - return; - - for (i = 0; i < pci_root_num; i++) { - if (pci_root_info[i].bus_min == b->number) - break; - } - - if (i == pci_root_num) - return; - - info = &pci_root_info[i]; - for (j = 0; j < info->res_num; j++) { - struct resource *res; - struct resource *root; - - res = &info->res[j]; - b->resource[j] = res; - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - else - root = &iomem_resource; - insert_resource(root, res); - } -} - -#define RANGE_NUM 16 - -struct res_range { - size_t start; - size_t end; -}; - -static void __init update_range(struct res_range *range, size_t start, - size_t end) -{ - int i; - int j; - - for (j = 0; j < RANGE_NUM; j++) { - if (!range[j].end) - continue; - - if (start <= range[j].start && end >= range[j].end) { - range[j].start = 0; - range[j].end = 0; - continue; - } - - if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { - range[j].start = end + 1; - continue; - } - - - if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { - range[j].end = start - 1; - continue; - } - - if (start > range[j].start && end < range[j].end) { - /* find the new spare */ - for (i = 0; i < RANGE_NUM; i++) { - if (range[i].end == 0) - break; - } - if (i < RANGE_NUM) { - range[i].end = range[j].end; - range[i].start = end + 1; - } else { - printk(KERN_ERR "run of slot in ranges\n"); - } - range[j].end = start - 1; - continue; - } - } -} - -static void __init update_res(struct pci_root_info *info, size_t start, - size_t end, unsigned long flags, int merge) -{ - int i; - struct resource *res; - - if (!merge) - goto addit; - - /* try to merge it with old one */ - for (i = 0; i < info->res_num; i++) { - size_t final_start, final_end; - size_t common_start, common_end; - - res = &info->res[i]; - if (res->flags != flags) - continue; - - common_start = max((size_t)res->start, start); - common_end = min((size_t)res->end, end); - if (common_start > common_end + 1) - continue; - - final_start = min((size_t)res->start, start); - final_end = max((size_t)res->end, end); - - res->start = final_start; - res->end = final_end; - return; - } - -addit: - - /* need to add that */ - if (info->res_num >= RES_NUM) - return; - - res = &info->res[info->res_num]; - res->name = info->name; - res->flags = flags; - res->start = start; - res->end = end; - res->child = NULL; - info->res_num++; -} - -struct pci_hostbridge_probe { - u32 bus; - u32 slot; - u32 vendor; - u32 device; -}; - -static struct pci_hostbridge_probe pci_probes[] __initdata = { - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, -}; - -static u64 __initdata fam10h_mmconf_start; -static u64 __initdata fam10h_mmconf_end; -static void __init get_pci_mmcfg_amd_fam10h_range(void) -{ - u32 address; - u64 base, msr; - unsigned segn_busn_bits; - - /* assume all cpus from fam10h have mmconf */ - if (boot_cpu_data.x86 < 0x10) - return; - - address = MSR_FAM10H_MMIO_CONF_BASE; - rdmsrl(address, msr); - - /* mmconfig is not enable */ - if (!(msr & FAM10H_MMIO_CONF_ENABLE)) - return; - - base = msr & (FAM10H_MMIO_CONF_BASE_MASK<> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & - FAM10H_MMIO_CONF_BUSRANGE_MASK; - - fam10h_mmconf_start = base; - fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; -} - -/** - * early_fill_mp_bus_to_node() - * called before pcibios_scan_root and pci_scan_bus - * fills the mp_bus_to_cpumask array based according to the LDT Bus Number - * Registers found in the K8 northbridge - */ -static int __init early_fill_mp_bus_info(void) -{ - int i; - int j; - unsigned bus; - unsigned slot; - int found; - int node; - int link; - int def_node; - int def_link; - struct pci_root_info *info; - u32 reg; - struct resource *res; - size_t start; - size_t end; - struct res_range range[RANGE_NUM]; - u64 val; - u32 address; - -#ifdef CONFIG_NUMA - for (i = 0; i < BUS_NR; i++) - mp_bus_to_node[i] = -1; -#endif - - if (!early_pci_allowed()) - return -1; - - found = 0; - for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { - u32 id; - u16 device; - u16 vendor; - - bus = pci_probes[i].bus; - slot = pci_probes[i].slot; - id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); - - vendor = id & 0xffff; - device = (id>>16) & 0xffff; - if (pci_probes[i].vendor == vendor && - pci_probes[i].device == device) { - found = 1; - break; - } - } - - if (!found) - return 0; - - pci_root_num = 0; - for (i = 0; i < 4; i++) { - int min_bus; - int max_bus; - reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); - - /* Check if that register is enabled for bus range */ - if ((reg & 7) != 3) - continue; - - min_bus = (reg >> 16) & 0xff; - max_bus = (reg >> 24) & 0xff; - node = (reg >> 4) & 0x07; -#ifdef CONFIG_NUMA - for (j = min_bus; j <= max_bus; j++) - mp_bus_to_node[j] = (unsigned char) node; -#endif - link = (reg >> 8) & 0x03; - - info = &pci_root_info[pci_root_num]; - info->bus_min = min_bus; - info->bus_max = max_bus; - info->node = node; - info->link = link; - sprintf(info->name, "PCI Bus #%02x", min_bus); - pci_root_num++; - } - - /* get the default node and link for left over res */ - reg = read_pci_config(bus, slot, 0, 0x60); - def_node = (reg >> 8) & 0x07; - reg = read_pci_config(bus, slot, 0, 0x64); - def_link = (reg >> 8) & 0x03; - - memset(range, 0, sizeof(range)); - range[0].end = 0xffff; - /* io port resource */ - for (i = 0; i < 4; i++) { - reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); - if (!(reg & 3)) - continue; - - start = reg & 0xfff000; - reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3)); - node = reg & 0x07; - link = (reg >> 4) & 0x03; - end = (reg & 0xfff000) | 0xfff; - - /* find the position */ - for (j = 0; j < pci_root_num; j++) { - info = &pci_root_info[j]; - if (info->node == node && info->link == link) - break; - } - if (j == pci_root_num) - continue; /* not found */ - - info = &pci_root_info[j]; - printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", - node, link, (u64)start, (u64)end); - - /* kernel only handle 16 bit only */ - if (end > 0xffff) - end = 0xffff; - update_res(info, start, end, IORESOURCE_IO, 1); - update_range(range, start, end); - } - /* add left over io port range to def node/link, [0, 0xffff] */ - /* find the position */ - for (j = 0; j < pci_root_num; j++) { - info = &pci_root_info[j]; - if (info->node == def_node && info->link == def_link) - break; - } - if (j < pci_root_num) { - info = &pci_root_info[j]; - for (i = 0; i < RANGE_NUM; i++) { - if (!range[i].end) - continue; - - update_res(info, range[i].start, range[i].end, - IORESOURCE_IO, 1); - } - } - - memset(range, 0, sizeof(range)); - /* 0xfd00000000-0xffffffffff for HT */ - range[0].end = (0xfdULL<<32) - 1; - - /* need to take out [0, TOM) for RAM*/ - address = MSR_K8_TOP_MEM1; - rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); - printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); - if (end < (1ULL<<32)) - update_range(range, 0, end - 1); - - /* get mmconfig */ - get_pci_mmcfg_amd_fam10h_range(); - /* need to take out mmconf range */ - if (fam10h_mmconf_end) { - printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); - update_range(range, fam10h_mmconf_start, fam10h_mmconf_end); - } - - /* mmio resource */ - for (i = 0; i < 8; i++) { - reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); - if (!(reg & 3)) - continue; - - start = reg & 0xffffff00; /* 39:16 on 31:8*/ - start <<= 8; - reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); - node = reg & 0x07; - link = (reg >> 4) & 0x03; - end = (reg & 0xffffff00); - end <<= 8; - end |= 0xffff; - - /* find the position */ - for (j = 0; j < pci_root_num; j++) { - info = &pci_root_info[j]; - if (info->node == node && info->link == link) - break; - } - if (j == pci_root_num) - continue; /* not found */ - - info = &pci_root_info[j]; - - printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", - node, link, (u64)start, (u64)end); - /* - * some sick allocation would have range overlap with fam10h - * mmconf range, so need to update start and end. - */ - if (fam10h_mmconf_end) { - int changed = 0; - u64 endx = 0; - if (start >= fam10h_mmconf_start && - start <= fam10h_mmconf_end) { - start = fam10h_mmconf_end + 1; - changed = 1; - } - - if (end >= fam10h_mmconf_start && - end <= fam10h_mmconf_end) { - end = fam10h_mmconf_start - 1; - changed = 1; - } - - if (start < fam10h_mmconf_start && - end > fam10h_mmconf_end) { - /* we got a hole */ - endx = fam10h_mmconf_start - 1; - update_res(info, start, endx, IORESOURCE_MEM, 0); - update_range(range, start, endx); - printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx); - start = fam10h_mmconf_end + 1; - changed = 1; - } - if (changed) { - if (start <= end) { - printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end); - } else { - printk(KERN_CONT "%s\n", endx?"":" ==> none"); - continue; - } - } - } - - update_res(info, start, end, IORESOURCE_MEM, 1); - update_range(range, start, end); - printk(KERN_CONT "\n"); - } - - /* need to take out [4G, TOM2) for RAM*/ - /* SYS_CFG */ - address = MSR_K8_SYSCFG; - rdmsrl(address, val); - /* TOP_MEM2 is enabled? */ - if (val & (1<<21)) { - /* TOP_MEM2 */ - address = MSR_K8_TOP_MEM2; - rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); - printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); - update_range(range, 1ULL<<32, end - 1); - } - - /* - * add left over mmio range to def node/link ? - * that is tricky, just record range in from start_min to 4G - */ - for (j = 0; j < pci_root_num; j++) { - info = &pci_root_info[j]; - if (info->node == def_node && info->link == def_link) - break; - } - if (j < pci_root_num) { - info = &pci_root_info[j]; - - for (i = 0; i < RANGE_NUM; i++) { - if (!range[i].end) - continue; - - update_res(info, range[i].start, range[i].end, - IORESOURCE_MEM, 1); - } - } - - for (i = 0; i < pci_root_num; i++) { - int res_num; - int busnum; - - info = &pci_root_info[i]; - res_num = info->res_num; - busnum = info->bus_min; - printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n", - info->bus_min, info->bus_max, info->node, info->link); - for (j = 0; j < res_num; j++) { - res = &info->res[j]; - printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n", - busnum, j, - (res->flags & IORESOURCE_IO)?"io port":"mmio", - res->start, res->end); - } - } - - return 0; -} - -postcore_initcall(early_fill_mp_bus_info); -- 1.5.5.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/