Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1764876AbYFTUdl (ORCPT ); Fri, 20 Jun 2008 16:33:41 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1761943AbYFTUVn (ORCPT ); Fri, 20 Jun 2008 16:21:43 -0400 Received: from earthlight.etchedpixels.co.uk ([81.2.110.250]:35223 "EHLO lxorguk.ukuu.org.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1761923AbYFTUVl (ORCPT ); Fri, 20 Jun 2008 16:21:41 -0400 From: Alan Cox Subject: [PATCH 47/70] tty-usb-ipw: Coding style To: linux-kernel@vger.kernel.org Date: Fri, 20 Jun 2008 21:04:17 +0100 Message-ID: <20080620200415.1479.36548.stgit@localhost.localdomain> In-Reply-To: <20080620195406.1479.12620.stgit@localhost.localdomain> References: <20080620195406.1479.12620.stgit@localhost.localdomain> User-Agent: StGIT/0.14.1 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15771 Lines: 468 From: Alan Cox Signed-off-by: Alan Cox --- drivers/usb/serial/ipw.c | 279 ++++++++++++++++++++++++---------------------- 1 files changed, 144 insertions(+), 135 deletions(-) diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index a89ebfe..a842025 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -10,27 +10,27 @@ * (at your option) any later version. * * All information about the device was acquired using SnoopyPro - * on MSFT's O/S, and examing the MSFT drivers' debug output + * on MSFT's O/S, and examing the MSFT drivers' debug output * (insanely left _on_ in the enduser version) * * It was written out of frustration with the IPWireless USB modem * supplied by Axity3G/Sentech South Africa not supporting * Linux whatsoever. * - * Nobody provided any proprietary information that was not already + * Nobody provided any proprietary information that was not already * available for this device. - * - * The modem adheres to the "3GPP TS 27.007 AT command set for 3G - * User Equipment (UE)" standard, available from + * + * The modem adheres to the "3GPP TS 27.007 AT command set for 3G + * User Equipment (UE)" standard, available from * http://www.3gpp.org/ftp/Specs/html-info/27007.htm * * The code was only tested the IPWireless handheld modem distributed * in South Africa by Sentech. - * + * * It may work for Woosh Inc in .nz too, as it appears they use the * same kit. * - * There is still some work to be done in terms of handling + * There is still some work to be done in terms of handling * DCD, DTR, RTS, CTS which are currently faked. * It's good enough for PPP at this point. It's based off all kinds of * code found in usb/serial and usb/class @@ -47,7 +47,7 @@ #include #include #include -#include +#include /* * Version Information @@ -64,7 +64,7 @@ /* Message sizes */ #define EVENT_BUFFER_SIZE 0xFF -#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) +#define CHAR2INT16(c1, c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) #define NUM_BULK_URBS 24 #define NUM_CONTROL_URBS 16 @@ -94,33 +94,34 @@ enum { /* data bits */ #define ipw_dtb_7 0x700 -#define ipw_dtb_8 0x810 // ok so the define is misleading, I know, but forces 8,n,1 - // I mean, is there a point to any other setting these days? :) +#define ipw_dtb_8 0x810 /* ok so the define is misleading, I know, but forces 8,n,1 */ + /* I mean, is there a point to any other setting these days? :) */ /* usb control request types : */ -#define IPW_SIO_RXCTL 0x00 // control bulk rx channel transmissions, value=1/0 (on/off) -#define IPW_SIO_SET_BAUD 0x01 // set baud, value=requested ipw_sio_bxxxx -#define IPW_SIO_SET_LINE 0x03 // set databits, parity. value=ipw_dtb_x -#define IPW_SIO_SET_PIN 0x03 // set/clear dtr/rts value=ipw_pin_xxx -#define IPW_SIO_POLL 0x08 // get serial port status byte, call with value=0 -#define IPW_SIO_INIT 0x11 // initializes ? value=0 (appears as first thing todo on open) -#define IPW_SIO_PURGE 0x12 // purge all transmissions?, call with value=numchar_to_purge -#define IPW_SIO_HANDFLOW 0x13 // set xon/xoff limits value=0, and a buffer of 0x10 bytes -#define IPW_SIO_SETCHARS 0x13 // set the flowcontrol special chars, value=0, buf=6 bytes, - // last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 +#define IPW_SIO_RXCTL 0x00 /* control bulk rx channel transmissions, value=1/0 (on/off) */ +#define IPW_SIO_SET_BAUD 0x01 /* set baud, value=requested ipw_sio_bxxxx */ +#define IPW_SIO_SET_LINE 0x03 /* set databits, parity. value=ipw_dtb_x */ +#define IPW_SIO_SET_PIN 0x03 /* set/clear dtr/rts value=ipw_pin_xxx */ +#define IPW_SIO_POLL 0x08 /* get serial port status byte, call with value=0 */ +#define IPW_SIO_INIT 0x11 /* initializes ? value=0 (appears as first thing todo on open) */ +#define IPW_SIO_PURGE 0x12 /* purge all transmissions?, call with value=numchar_to_purge */ +#define IPW_SIO_HANDFLOW 0x13 /* set xon/xoff limits value=0, and a buffer of 0x10 bytes */ +#define IPW_SIO_SETCHARS 0x13 /* set the flowcontrol special chars, value=0, buf=6 bytes, */ + /* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */ /* values used for request IPW_SIO_SET_PIN */ #define IPW_PIN_SETDTR 0x101 #define IPW_PIN_SETRTS 0x202 #define IPW_PIN_CLRDTR 0x100 -#define IPW_PIN_CLRRTS 0x200 // unconfirmed +#define IPW_PIN_CLRRTS 0x200 /* unconfirmed */ /* values used for request IPW_SIO_RXCTL */ #define IPW_RXBULK_ON 1 #define IPW_RXBULK_OFF 0 /* various 16 byte hardcoded transferbuffers used by flow control */ -#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } +#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0 } /* Interpretation of modem status lines */ /* These need sorting out by individually connecting pins and checking @@ -132,17 +133,6 @@ enum { #define IPW_CTS ((1<<5) | (1<<4)) #define IPW_WANTS_TO_SEND 0x30 -//#define IPW_DTR /* Data Terminal Ready */ -//#define IPW_CTS /* Clear To Send */ -//#define IPW_CD /* Carrier Detect */ -//#define IPW_DSR /* Data Set Ready */ -//#define IPW_RxD /* Receive pin */ - -//#define IPW_LE -//#define IPW_RTS -//#define IPW_ST -//#define IPW_SR -//#define IPW_RI /* Ring Indicator */ static struct usb_device_id usb_ipw_ids[] = { { USB_DEVICE(IPW_VID, IPW_PID) }, @@ -177,7 +167,8 @@ static void ipw_read_bulk_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); tty = port->port.tty; if (tty && urb->actual_length) { @@ -187,15 +178,17 @@ static void ipw_read_bulk_callback(struct urb *urb) } /* Continue trying to always read */ - usb_fill_bulk_urb (port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - ipw_read_bulk_callback, port); + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + ipw_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); return; } @@ -216,26 +209,30 @@ static int ipw_open(struct tty_struct *tty, if (tty) tty->low_latency = 1; - /* --1: Tell the modem to initialize (we think) From sniffs this is always the - * first thing that gets sent to the modem during opening of the device */ - dbg("%s: Sending SIO_INIT (we guess)",__func__); - result = usb_control_msg(dev, usb_sndctrlpipe(dev,0), - IPW_SIO_INIT, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - 0, - 0, /* index */ - NULL, - 0, - 100000); + /* --1: Tell the modem to initialize (we think) From sniffs this is + * always the first thing that gets sent to the modem during + * opening of the device */ + dbg("%s: Sending SIO_INIT (we guess)", __func__); + result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + IPW_SIO_INIT, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + 0, + 0, /* index */ + NULL, + 0, + 100000); if (result < 0) - dev_err(&port->dev, "Init of modem failed (error = %d)\n", result); + dev_err(&port->dev, + "Init of modem failed (error = %d)\n", result); /* reset the bulk pipes */ - usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress)); - usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); + usb_clear_halt(dev, + usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress)); + usb_clear_halt(dev, + usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); - /*--2: Start reading from the device */ - dbg("%s: setting up bulk read callback",__func__); + /*--2: Start reading from the device */ + dbg("%s: setting up bulk read callback", __func__); usb_fill_bulk_urb(port->read_urb, dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), port->bulk_in_buffer, @@ -243,67 +240,72 @@ static int ipw_open(struct tty_struct *tty, ipw_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result < 0) - dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result); + dbg("%s - usb_submit_urb(read bulk) failed with status %d", + __func__, result); /*--3: Tell the modem to open the floodgates on the rx bulk channel */ - dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__); + dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_RXCTL, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_RXBULK_ON, - 0, /* index */ - NULL, - 0, - 100000); - if (result < 0) - dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result); + IPW_SIO_RXCTL, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_RXBULK_ON, + 0, /* index */ + NULL, + 0, + 100000); + if (result < 0) + dev_err(&port->dev, + "Enabling bulk RxRead failed (error = %d)\n", result); /*--4: setup the initial flowcontrol */ - dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init); + dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_HANDFLOW, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - 0, - 0, - buf_flow_init, - 0x10, - 200000); + IPW_SIO_HANDFLOW, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + 0, + 0, + buf_flow_init, + 0x10, + 200000); if (result < 0) - dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result); + dev_err(&port->dev, + "initial flowcontrol failed (error = %d)\n", result); /*--5: raise the dtr */ - dbg("%s:raising dtr",__func__); + dbg("%s:raising dtr", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_SET_PIN, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_SETDTR, - 0, - NULL, - 0, - 200000); + IPW_SIO_SET_PIN, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_PIN_SETDTR, + 0, + NULL, + 0, + 200000); if (result < 0) - dev_err(&port->dev, "setting dtr failed (error = %d)\n", result); + dev_err(&port->dev, + "setting dtr failed (error = %d)\n", result); /*--6: raise the rts */ - dbg("%s:raising rts",__func__); + dbg("%s:raising rts", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_SET_PIN, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_SETRTS, - 0, - NULL, - 0, - 200000); + IPW_SIO_SET_PIN, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_PIN_SETRTS, + 0, + NULL, + 0, + 200000); if (result < 0) - dev_err(&port->dev, "setting dtr failed (error = %d)\n", result); - + dev_err(&port->dev, + "setting dtr failed (error = %d)\n", result); + kfree(buf_flow_init); return 0; } static void ipw_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file * filp) + struct usb_serial_port *port, struct file *filp) { struct usb_device *dev = port->serial->dev; int result; @@ -314,56 +316,62 @@ static void ipw_close(struct tty_struct *tty, } /*--1: drop the dtr */ - dbg("%s:dropping dtr",__func__); + dbg("%s:dropping dtr", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_SET_PIN, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRDTR, - 0, - NULL, - 0, - 200000); + IPW_SIO_SET_PIN, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_PIN_CLRDTR, + 0, + NULL, + 0, + 200000); if (result < 0) - dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result); + dev_err(&port->dev, "dropping dtr failed (error = %d)\n", + result); /*--2: drop the rts */ - dbg("%s:dropping rts",__func__); + dbg("%s:dropping rts", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRRTS, - 0, - NULL, - 0, - 200000); + IPW_SIO_SET_PIN, USB_TYPE_VENDOR | + USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_PIN_CLRRTS, + 0, + NULL, + 0, + 200000); if (result < 0) - dev_err(&port->dev, "dropping rts failed (error = %d)\n", result); + dev_err(&port->dev, + "dropping rts failed (error = %d)\n", result); /*--3: purge */ - dbg("%s:sending purge",__func__); + dbg("%s:sending purge", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - 0x03, - 0, - NULL, - 0, - 200000); + IPW_SIO_PURGE, USB_TYPE_VENDOR | + USB_RECIP_INTERFACE | USB_DIR_OUT, + 0x03, + 0, + NULL, + 0, + 200000); if (result < 0) dev_err(&port->dev, "purge failed (error = %d)\n", result); - /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */ + /* send RXBULK_off (tell modem to stop transmitting bulk data on + rx chan) */ result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_RXCTL, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_RXBULK_OFF, - 0, /* index */ - NULL, - 0, - 100000); + IPW_SIO_RXCTL, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_RXBULK_OFF, + 0, /* index */ + NULL, + 0, + 100000); if (result < 0) - dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result); + dev_err(&port->dev, + "Disabling bulk RxRead failed (error = %d)\n", result); /* shutdown any in-flight urbs that we know about */ usb_kill_urb(port->read_urb); @@ -393,7 +401,7 @@ static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port, int ret; dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__, - count, in_interrupt() ); + count, in_interrupt()); if (count == 0) { dbg("%s - write request of 0 bytes", __func__); @@ -424,13 +432,14 @@ static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port, ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (ret != 0) { port->write_urb_busy = 0; - dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret); + dbg("%s - usb_submit_urb(write bulk) failed with error = %d", + __func__, ret); return ret; } dbg("%s returning %d", __func__, count); return count; -} +} static int ipw_probe(struct usb_serial_port *port) { @@ -489,8 +498,8 @@ module_init(usb_ipw_init); module_exit(usb_ipw_exit); /* Module information */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/