Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1765466AbYFTUgc (ORCPT ); Fri, 20 Jun 2008 16:36:32 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1762169AbYFTUWb (ORCPT ); Fri, 20 Jun 2008 16:22:31 -0400 Received: from earthlight.etchedpixels.co.uk ([81.2.110.250]:35235 "EHLO lxorguk.ukuu.org.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1762157AbYFTUW1 (ORCPT ); Fri, 20 Jun 2008 16:22:27 -0400 From: Alan Cox Subject: [PATCH 53/70] tty-usb-kl5kusb105: Coding style To: linux-kernel@vger.kernel.org Date: Fri, 20 Jun 2008 21:05:02 +0100 Message-ID: <20080620200500.1479.63072.stgit@localhost.localdomain> In-Reply-To: <20080620195406.1479.12620.stgit@localhost.localdomain> References: <20080620195406.1479.12620.stgit@localhost.localdomain> User-Agent: StGIT/0.14.1 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 30071 Lines: 883 From: Alan Cox Signed-off-by: Alan Cox --- drivers/usb/serial/kl5kusb105.c | 389 +++++++++++++++++++-------------------- 1 files changed, 188 insertions(+), 201 deletions(-) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 4c27ccc..d898dc4 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -15,12 +15,12 @@ * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided * information that was not already available. * - * It seems that KLSI bought some silicon-design information from ScanLogic, + * It seems that KLSI bought some silicon-design information from ScanLogic, * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI. * KLSI has firmware available for their devices; it is probable that the * firmware differs from that used by KLSI in their products. If you have an - * original KLSI device and can provide some information on it, I would be - * most interested in adding support for it here. If you have any information + * original KLSI device and can provide some information on it, I would be + * most interested in adding support for it here. If you have any information * on the protocol used (or find errors in my reverse-engineered stuff), please * let me know. * @@ -40,7 +40,7 @@ * 0.2 - TIOCMGET works, so autopilot(1) can be used! * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l * - * The driver skeleton is mainly based on mct_u232.c and various other + * The driver skeleton is mainly based on mct_u232.c and various other * pieces of code shamelessly copied from the drivers/usb/serial/ directory. */ @@ -53,7 +53,7 @@ #include #include #include -#include +#include #include #include #include @@ -72,37 +72,25 @@ static int debug; /* * Function prototypes */ -static int klsi_105_startup (struct usb_serial *serial); -static void klsi_105_shutdown (struct usb_serial *serial); -static int klsi_105_open (struct tty_struct *tty, - struct usb_serial_port *port, - struct file *filp); -static void klsi_105_close (struct tty_struct *tty, - struct usb_serial_port *port, - struct file *filp); -static int klsi_105_write (struct tty_struct *tty, - struct usb_serial_port *port, - const unsigned char *buf, - int count); -static void klsi_105_write_bulk_callback (struct urb *urb); -static int klsi_105_chars_in_buffer (struct tty_struct *tty); -static int klsi_105_write_room (struct tty_struct *tty); - -static void klsi_105_read_bulk_callback (struct urb *urb); -static void klsi_105_set_termios (struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old); -static void klsi_105_throttle (struct tty_struct *tty); -static void klsi_105_unthrottle (struct tty_struct *tty); -/* -static void klsi_105_break_ctl (struct tty_struct *tty, - int break_state ); - */ -static int klsi_105_tiocmget (struct tty_struct *tty, - struct file *file); -static int klsi_105_tiocmset (struct tty_struct *tty, - struct file *file, unsigned int set, - unsigned int clear); +static int klsi_105_startup(struct usb_serial *serial); +static void klsi_105_shutdown(struct usb_serial *serial); +static int klsi_105_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void klsi_105_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static int klsi_105_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); +static void klsi_105_write_bulk_callback(struct urb *urb); +static int klsi_105_chars_in_buffer(struct tty_struct *tty); +static int klsi_105_write_room(struct tty_struct *tty); +static void klsi_105_read_bulk_callback(struct urb *urb); +static void klsi_105_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static void klsi_105_throttle(struct tty_struct *tty); +static void klsi_105_unthrottle(struct tty_struct *tty); +static int klsi_105_tiocmget((struct tty_struct *tty, struct file *file); +static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); /* * All of the device info needed for the KLSI converters. @@ -113,7 +101,7 @@ static struct usb_device_id id_table [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver kl5kusb105d_driver = { .name = "kl5kusb105d", @@ -138,7 +126,7 @@ static struct usb_serial_driver kl5kusb105d_device = { .write_bulk_callback = klsi_105_write_bulk_callback, .chars_in_buffer = klsi_105_chars_in_buffer, .write_room = klsi_105_write_room, - .read_bulk_callback =klsi_105_read_bulk_callback, + .read_bulk_callback = klsi_105_read_bulk_callback, .set_termios = klsi_105_set_termios, /*.break_ctl = klsi_105_break_ctl,*/ .tiocmget = klsi_105_tiocmget, @@ -165,7 +153,7 @@ struct klsi_105_private { struct ktermios termios; unsigned long line_state; /* modem line settings */ /* write pool */ - struct urb * write_urb_pool[NUM_URBS]; + struct urb *write_urb_pool[NUM_URBS]; spinlock_t lock; unsigned long bytes_in; unsigned long bytes_out; @@ -184,15 +172,15 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port, { int rc; - rc = usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - KL5KUSB105A_SIO_SET_DATA, - USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, /* value */ - 0, /* index */ - settings, - sizeof(struct klsi_105_port_settings), - KLSI_TIMEOUT); + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_SET_DATA, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, + 0, /* value */ + 0, /* index */ + settings, + sizeof(struct klsi_105_port_settings), + KLSI_TIMEOUT); if (rc < 0) err("Change port settings failed (error = %d)", rc); info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d", @@ -200,7 +188,7 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port, settings->pktlen, settings->baudrate, settings->databits, settings->unknown1, settings->unknown2); - return rc; + return rc; } /* klsi_105_chg_port_settings */ /* translate a 16-bit status value from the device to linux's TIO bits */ @@ -214,9 +202,9 @@ static unsigned long klsi_105_status2linestate(const __u16 status) return res; } -/* +/* * Read line control via vendor command and return result through - * *line_state_p + * *line_state_p */ /* It seems that the status buffer has always only 2 bytes length */ #define KLSI_STATUSBUF_LEN 2 @@ -224,14 +212,14 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, unsigned long *line_state_p) { int rc; - __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1}; + __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1}; __u16 status; info("%s - sending SIO Poll request", __func__); - rc = usb_control_msg(port->serial->dev, + rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), KL5KUSB105A_SIO_POLL, - USB_TYPE_VENDOR | USB_DIR_IN, + USB_TYPE_VENDOR | USB_DIR_IN, 0, /* value */ 0, /* index */ status_buf, KLSI_STATUSBUF_LEN, @@ -247,8 +235,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, *line_state_p = klsi_105_status2linestate(status); } - - return rc; + return rc; } @@ -256,7 +243,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, * Driver's tty interface functions */ -static int klsi_105_startup (struct usb_serial *serial) +static int klsi_105_startup(struct usb_serial *serial) { struct klsi_105_private *priv; int i, j; @@ -266,7 +253,7 @@ static int klsi_105_startup (struct usb_serial *serial) */ /* allocate the private data structure */ - for (i=0; inum_ports; i++) { + for (i = 0; i < serial->num_ports; i++) { priv = kmalloc(sizeof(struct klsi_105_private), GFP_KERNEL); if (!priv) { @@ -287,9 +274,9 @@ static int klsi_105_startup (struct usb_serial *serial) priv->bytes_out = 0; usb_set_serial_port_data(serial->port[i], priv); - spin_lock_init (&priv->lock); - for (j=0; jlock); + for (j = 0; j < NUM_URBS; j++) { + struct urb *urb = usb_alloc_urb(0, GFP_KERNEL); priv->write_urb_pool[j] = urb; if (urb == NULL) { @@ -297,10 +284,11 @@ static int klsi_105_startup (struct usb_serial *serial) goto err_cleanup; } - urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, - GFP_KERNEL); + urb->transfer_buffer = + kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s - out of memory for urb buffers.", __func__); + err("%s - out of memory for urb buffers.", + __func__); goto err_cleanup; } } @@ -308,13 +296,13 @@ static int klsi_105_startup (struct usb_serial *serial) /* priv->termios is left uninitalized until port opening */ init_waitqueue_head(&serial->port[i]->write_wait); } - + return 0; err_cleanup: for (; i >= 0; i--) { priv = usb_get_serial_port_data(serial->port[i]); - for (j=0; j < NUM_URBS; j++) { + for (j = 0; j < NUM_URBS; j++) { if (priv->write_urb_pool[j]) { kfree(priv->write_urb_pool[j]->transfer_buffer); usb_free_urb(priv->write_urb_pool[j]); @@ -326,22 +314,23 @@ err_cleanup: } /* klsi_105_startup */ -static void klsi_105_shutdown (struct usb_serial *serial) +static void klsi_105_shutdown(struct usb_serial *serial) { int i; - + dbg("%s", __func__); /* stop reads and writes on all ports */ - for (i=0; i < serial->num_ports; ++i) { - struct klsi_105_private *priv = usb_get_serial_port_data(serial->port[i]); + for (i = 0; i < serial->num_ports; ++i) { + struct klsi_105_private *priv = + usb_get_serial_port_data(serial->port[i]); unsigned long flags; if (priv) { /* kill our write urb pool */ int j; struct urb **write_urbs = priv->write_urb_pool; - spin_lock_irqsave(&priv->lock,flags); + spin_lock_irqsave(&priv->lock, flags); for (j = 0; j < NUM_URBS; j++) { if (write_urbs[j]) { @@ -353,12 +342,10 @@ static void klsi_105_shutdown (struct usb_serial *serial) * oopses. */ /* usb_kill_urb(write_urbs[j]); */ kfree(write_urbs[j]->transfer_buffer); - usb_free_urb (write_urbs[j]); + usb_free_urb(write_urbs[j]); } } - - spin_unlock_irqrestore (&priv->lock, flags); - + spin_unlock_irqrestore(&priv->lock, flags); kfree(priv); usb_set_serial_port_data(serial->port[i], NULL); } @@ -384,7 +371,7 @@ static int klsi_105_open(struct tty_struct *tty, /* Do a defined restart: * Set up sane default baud rate and send the 'READ_ON' - * vendor command. + * vendor command. * FIXME: set modem line control (how?) * Then read the modem line control and store values in * priv->line_state. @@ -395,24 +382,24 @@ static int klsi_105_open(struct tty_struct *tty, cfg.unknown1 = 0; cfg.unknown2 = 1; klsi_105_chg_port_settings(port, &cfg); - + /* set up termios structure */ - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); priv->termios.c_iflag = tty->termios->c_iflag; priv->termios.c_oflag = tty->termios->c_oflag; priv->termios.c_cflag = tty->termios->c_cflag; priv->termios.c_lflag = tty->termios->c_lflag; - for (i=0; itermios.c_cc[i] = tty->termios->c_cc[i]; priv->cfg.pktlen = cfg.pktlen; priv->cfg.baudrate = cfg.baudrate; priv->cfg.databits = cfg.databits; priv->cfg.unknown1 = cfg.unknown1; priv->cfg.unknown2 = cfg.unknown2; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); /* READ_ON and urb submission */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -428,7 +415,7 @@ static int klsi_105_open(struct tty_struct *tty, } rc = usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev,0), + usb_sndctrlpipe(port->serial->dev, 0), KL5KUSB105A_SIO_CONFIGURE, USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE, KL5KUSB105A_SIO_CONFIGURE_READ_ON, @@ -439,14 +426,14 @@ static int klsi_105_open(struct tty_struct *tty, if (rc < 0) { err("Enabling read failed (error = %d)", rc); retval = rc; - } else + } else dbg("%s - enabled reading", __func__); rc = klsi_105_get_line_state(port, &line_state); if (rc >= 0) { - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); priv->line_state = line_state; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore*&priv->lock, flags); dbg("%s - read line state 0x%lx", __func__, line_state); retval = 0; } else @@ -468,14 +455,14 @@ static void klsi_105_close(struct tty_struct *tty, mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { /* send READ_OFF */ - rc = usb_control_msg (port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - KL5KUSB105A_SIO_CONFIGURE, - USB_TYPE_VENDOR | USB_DIR_OUT, - KL5KUSB105A_SIO_CONFIGURE_READ_OFF, - 0, /* index */ - NULL, 0, - KLSI_TIMEOUT); + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR | USB_DIR_OUT, + KL5KUSB105A_SIO_CONFIGURE_READ_OFF, + 0, /* index */ + NULL, 0, + KLSI_TIMEOUT); if (rc < 0) err("Disabling read failed (error = %d)", rc); } @@ -488,12 +475,13 @@ static void klsi_105_close(struct tty_struct *tty, /* FIXME */ /* wgg - do I need this? I think so. */ usb_kill_urb(port->interrupt_in_urb); - info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", priv->bytes_in, priv->bytes_out); + info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", + priv->bytes_in, priv->bytes_out); } /* klsi_105_close */ /* We need to write a complete 64-byte data block and encode the - * number actually sent in the first double-byte, LSB-order. That + * number actually sent in the first double-byte, LSB-order. That * leaves at most 62 bytes of payload. */ #define KLSI_105_DATA_OFFSET 2 /* in the bulk urb data block */ @@ -504,7 +492,7 @@ static int klsi_105_write(struct tty_struct *tty, { struct klsi_105_private *priv = usb_get_serial_port_data(port); int result, size; - int bytes_sent=0; + int bytes_sent = 0; dbg("%s - port %d", __func__, port->number); @@ -513,34 +501,37 @@ static int klsi_105_write(struct tty_struct *tty, struct urb *urb = NULL; unsigned long flags; int i; - /* since the pool is per-port we might not need the spin lock !? */ - spin_lock_irqsave (&priv->lock, flags); - for (i=0; ilock, flags); + for (i = 0; i < NUM_URBS; i++) { if (priv->write_urb_pool[i]->status != -EINPROGRESS) { urb = priv->write_urb_pool[i]; dbg("%s - using pool URB %d", __func__, i); break; } } - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); - if (urb==NULL) { + if (urb == NULL) { dbg("%s - no more free urbs", __func__); goto exit; } if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); + urb->transfer_buffer = + kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); if (urb->transfer_buffer == NULL) { err("%s - no more kernel memory...", __func__); goto exit; } } - size = min (count, port->bulk_out_size - KLSI_105_DATA_OFFSET); - size = min (size, URB_TRANSFER_BUFFER_SIZE - KLSI_105_DATA_OFFSET); + size = min(count, port->bulk_out_size - KLSI_105_DATA_OFFSET); + size = min(size, URB_TRANSFER_BUFFER_SIZE - + KLSI_105_DATA_OFFSET); - memcpy (urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size); + memcpy(urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size); /* write payload size into transfer buffer */ ((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF); @@ -558,7 +549,8 @@ static int klsi_105_write(struct tty_struct *tty, /* send the data out the bulk port */ result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __func__, result); + err("%s - failed submitting write urb, error %d", + __func__, result); goto exit; } buf += size; @@ -567,12 +559,12 @@ static int klsi_105_write(struct tty_struct *tty, } exit: /* lockless, but it's for debug info only... */ - priv->bytes_out+=bytes_sent; + priv->bytes_out += bytes_sent; return bytes_sent; /* that's how much we wrote */ } /* klsi_105_write */ -static void klsi_105_write_bulk_callback ( struct urb *urb) +static void klsi_105_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; int status = urb->status; @@ -590,7 +582,7 @@ static void klsi_105_write_bulk_callback ( struct urb *urb) /* return number of characters currently in the writing process */ -static int klsi_105_chars_in_buffer (struct tty_struct *tty) +static int klsi_105_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; int chars = 0; @@ -598,21 +590,20 @@ static int klsi_105_chars_in_buffer (struct tty_struct *tty) unsigned long flags; struct klsi_105_private *priv = usb_get_serial_port_data(port); - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); for (i = 0; i < NUM_URBS; ++i) { - if (priv->write_urb_pool[i]->status == -EINPROGRESS) { + if (priv->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; - } } - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - returns %d", __func__, chars); - return (chars); + return chars; } -static int klsi_105_write_room (struct tty_struct *tty) +static int klsi_105_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned long flags; @@ -620,22 +611,21 @@ static int klsi_105_write_room (struct tty_struct *tty) int room = 0; struct klsi_105_private *priv = usb_get_serial_port_data(port); - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); for (i = 0; i < NUM_URBS; ++i) { - if (priv->write_urb_pool[i]->status != -EINPROGRESS) { + if (priv->write_urb_pool[i]->status != -EINPROGRESS) room += URB_TRANSFER_BUFFER_SIZE; - } } - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - returns %d", __func__, room); - return (room); + return room; } -static void klsi_105_read_bulk_callback (struct urb *urb) +static void klsi_105_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct klsi_105_private *priv = usb_get_serial_port_data(port); @@ -674,7 +664,7 @@ static void klsi_105_read_bulk_callback (struct urb *urb) * against re-entry an then mixed-up data because of * intermixed tty_flip_buffer_push()s * FIXME - */ + */ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); @@ -694,7 +684,7 @@ static void klsi_105_read_bulk_callback (struct urb *urb) priv->bytes_in += bytes_sent; } /* Continue trying to always read */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -703,13 +693,14 @@ static void klsi_105_read_bulk_callback (struct urb *urb) port); rc = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (rc) - err("%s - failed resubmitting read urb, error %d", __func__, rc); + err("%s - failed resubmitting read urb, error %d", + __func__, rc); } /* klsi_105_read_bulk_callback */ -static void klsi_105_set_termios (struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) +static void klsi_105_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) { struct klsi_105_private *priv = usb_get_serial_port_data(port); unsigned int iflag = tty->termios->c_iflag; @@ -719,65 +710,63 @@ static void klsi_105_set_termios (struct tty_struct *tty, struct klsi_105_port_settings cfg; unsigned long flags; speed_t baud; - + /* lock while we are modifying the settings */ - spin_lock_irqsave (&priv->lock, flags); - + spin_lock_irqsave(&priv->lock, flags); + /* * Update baud rate */ baud = tty_get_baud_rate(tty); - if( (cflag & CBAUD) != (old_cflag & CBAUD) ) { - /* reassert DTR and (maybe) RTS on transition from B0 */ - if( (old_cflag & CBAUD) == B0 ) { + if ((cflag & CBAUD) != (old_cflag & CBAUD)) { + /* reassert DTR and (maybe) RTS on transition from B0 */ + if ((old_cflag & CBAUD) == B0) { dbg("%s: baud was B0", __func__); #if 0 priv->control_state |= TIOCM_DTR; /* don't set RTS if using hardware flow control */ - if (!(old_cflag & CRTSCTS)) { + if (!(old_cflag & CRTSCTS)) priv->control_state |= TIOCM_RTS; - } mct_u232_set_modem_ctrl(serial, priv->control_state); #endif } } - switch(baud) { - case 0: /* handled below */ - break; - case 1200: - priv->cfg.baudrate = kl5kusb105a_sio_b1200; - break; - case 2400: - priv->cfg.baudrate = kl5kusb105a_sio_b2400; - break; - case 4800: - priv->cfg.baudrate = kl5kusb105a_sio_b4800; - break; - case 9600: + switch (baud) { + case 0: /* handled below */ + break; + case 1200: + priv->cfg.baudrate = kl5kusb105a_sio_b1200; + break; + case 2400: + priv->cfg.baudrate = kl5kusb105a_sio_b2400; + break; + case 4800: + priv->cfg.baudrate = kl5kusb105a_sio_b4800; + break; + case 9600: + priv->cfg.baudrate = kl5kusb105a_sio_b9600; + break; + case 19200: + priv->cfg.baudrate = kl5kusb105a_sio_b19200; + break; + case 38400: + priv->cfg.baudrate = kl5kusb105a_sio_b38400; + break; + case 57600: + priv->cfg.baudrate = kl5kusb105a_sio_b57600; + break; + case 115200: + priv->cfg.baudrate = kl5kusb105a_sio_b115200; + break; + default: + dbg("KLSI USB->Serial converter:" + " unsupported baudrate request, using default of 9600"); priv->cfg.baudrate = kl5kusb105a_sio_b9600; - break; - case 19200: - priv->cfg.baudrate = kl5kusb105a_sio_b19200; - break; - case 38400: - priv->cfg.baudrate = kl5kusb105a_sio_b38400; - break; - case 57600: - priv->cfg.baudrate = kl5kusb105a_sio_b57600; - break; - case 115200: - priv->cfg.baudrate = kl5kusb105a_sio_b115200; - break; - default: - dbg("KLSI USB->Serial converter:" - " unsupported baudrate request, using default" - " of 9600"); - priv->cfg.baudrate = kl5kusb105a_sio_b9600; - baud = 9600; - break; + baud = 9600; + break; } - if ((cflag & CBAUD) == B0 ) { + if ((cflag & CBAUD) == B0) { dbg("%s: baud is B0", __func__); /* Drop RTS and DTR */ /* maybe this should be simulated by sending read @@ -786,7 +775,7 @@ static void klsi_105_set_termios (struct tty_struct *tty, ; #if 0 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); - mct_u232_set_modem_ctrl(serial, priv->control_state); + mct_u232_set_modem_ctrl(serial, priv->control_state); #endif } tty_encode_baud_rate(tty, baud, baud); @@ -796,11 +785,11 @@ static void klsi_105_set_termios (struct tty_struct *tty, switch (cflag & CSIZE) { case CS5: dbg("%s - 5 bits/byte not supported", __func__); - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); return ; case CS6: dbg("%s - 6 bits/byte not supported", __func__); - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); return ; case CS7: priv->cfg.databits = kl5kusb105a_dtb_7; @@ -819,8 +808,7 @@ static void klsi_105_set_termios (struct tty_struct *tty, * Update line control register (LCR) */ if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) - || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) { - + || (cflag & CSTOPB) != (old_cflag & CSTOPB)) { /* Not currently supported */ tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB); #if 0 @@ -841,20 +829,18 @@ static void klsi_105_set_termios (struct tty_struct *tty, #endif ; } - /* * Set flow control: well, I do not really now how to handle DTR/RTS. * Just do what we have seen with SniffUSB on Win98. */ - if( (iflag & IXOFF) != (old_iflag & IXOFF) + if ((iflag & IXOFF) != (old_iflag & IXOFF) || (iflag & IXON) != (old_iflag & IXON) - || (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) { - + || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { /* Not currently supported */ tty->termios->c_cflag &= ~CRTSCTS; /* Drop DTR/RTS if no flow control otherwise assert */ #if 0 - if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) ) + if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS)) priv->control_state |= TIOCM_DTR | TIOCM_RTS; else priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); @@ -862,20 +848,21 @@ static void klsi_105_set_termios (struct tty_struct *tty, #endif ; } - memcpy (&cfg, &priv->cfg, sizeof(cfg)); - spin_unlock_irqrestore (&priv->lock, flags); - + memcpy(&cfg, &priv->cfg, sizeof(cfg)); + spin_unlock_irqrestore(&priv->lock, flags); + /* now commit changes to device */ klsi_105_chg_port_settings(port, &cfg); } /* klsi_105_set_termios */ #if 0 -static void mct_u232_break_ctl( struct tty_struct *tty, int break_state ) +static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; - struct mct_u232_private *priv = (struct mct_u232_private *)port->private; + struct mct_u232_private *priv = + (struct mct_u232_private *)port->private; unsigned char lcr = priv->last_lcr; dbg("%sstate=%d", __func__, break_state); @@ -887,7 +874,7 @@ static void mct_u232_break_ctl( struct tty_struct *tty, int break_state ) } /* mct_u232_break_ctl */ #endif -static int klsi_105_tiocmget (struct tty_struct *tty, struct file *file) +static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; struct klsi_105_private *priv = usb_get_serial_port_data(port); @@ -903,18 +890,18 @@ static int klsi_105_tiocmget (struct tty_struct *tty, struct file *file) return rc; } - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); priv->line_state = line_state; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - read line state 0x%lx", __func__, line_state); return (int)line_state; } -static int klsi_105_tiocmset (struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { int retval = -EINVAL; - + dbg("%s", __func__); /* if this ever gets implemented, it should be done something like this: @@ -939,14 +926,14 @@ static int klsi_105_tiocmset (struct tty_struct *tty, struct file *file, return retval; } -static void klsi_105_throttle (struct tty_struct *tty) +static void klsi_105_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); } -static void klsi_105_unthrottle (struct tty_struct *tty) +static void klsi_105_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; int result; @@ -962,7 +949,7 @@ static void klsi_105_unthrottle (struct tty_struct *tty) -static int __init klsi_105_init (void) +static int __init klsi_105_init(void) { int retval; retval = usb_serial_register(&kl5kusb105d_device); @@ -981,19 +968,19 @@ failed_usb_serial_register: } -static void __exit klsi_105_exit (void) +static void __exit klsi_105_exit(void) { - usb_deregister (&kl5kusb105d_driver); - usb_serial_deregister (&kl5kusb105d_device); + usb_deregister(&kl5kusb105d_driver); + usb_serial_deregister(&kl5kusb105d_device); } -module_init (klsi_105_init); -module_exit (klsi_105_exit); +module_init(klsi_105_init); +module_exit(klsi_105_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/