Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 17 Jan 2002 03:32:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 17 Jan 2002 03:32:37 -0500 Received: from arm.t19.ds.pwr.wroc.pl ([156.17.236.105]:3588 "EHLO arm.t19.ds.pwr.wroc.pl") by vger.kernel.org with ESMTP id ; Thu, 17 Jan 2002 03:32:17 -0500 To: Andre Hedrick Cc: linux-kernel@vger.kernel.org Subject: Re: Andre IDE patches + Promise, UDMA detection In-Reply-To: X-Attribution: arekm X-URL: http://www.t17.ds.pwr.wroc.pl/~misiek/ipv6/ Organization: PLD Linux Distribution Team From: Arkadiusz Miskiewicz Date: 17 Jan 2002 09:31:55 +0100 In-Reply-To: Message-ID: <87heplcr9g.fsf@arm.t19.ds.pwr.wroc.pl> Lines: 56 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Andre Hedrick writes: > Because sometimes the decay rate of the capacitance check after execute > drive diagnostics command from POST is faster than boot. > > Also if this problem happens only after a cold boot, but a warm boot is > valid, you can set the CONFIG_IDEDMA_IVB=y Unfortunately problem always happens - cold boot, warm boot - no difference. So setting CONFIG_IDEDMA_IVB=y won't help in this case? My IDE config looks that: CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=m # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_IDEDISK_STROKE is not set CONFIG_IDE_TASKFILE_IO=y # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=m # CONFIG_IDE_TASK_IOCTL is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_IDEDMA_PCI_AUTO is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_IDEDMA_IVB is not set CONFIG_BLK_DEV_IDE_MODES=y CONFIG_CD_NO_IDESCSI=y > > Unfortunately it thinks that all my harddrives (connected to promise > > via 80wire cable) are UDMA33! Now _sometimes_ after boot it detects > > these (properly) as UDMA100 and sometimes (seems more frequently) > > as UDMA33. > Andre Hedrick > Linux Disk Certification Project Linux ATA Development -- Arkadiusz Mi?kiewicz IPv6 ready PLD Linux at http://www.pld.org.pl misiek(at)pld.org.pl AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PWr - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/