Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757354AbYFUCMQ (ORCPT ); Fri, 20 Jun 2008 22:12:16 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751277AbYFUCMA (ORCPT ); Fri, 20 Jun 2008 22:12:00 -0400 Received: from smtpq2.groni1.gr.home.nl ([213.51.130.201]:49125 "EHLO smtpq2.groni1.gr.home.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753267AbYFUCLx (ORCPT ); Fri, 20 Jun 2008 22:11:53 -0400 Message-ID: <485C6388.1050903@keyaccess.nl> Date: Sat, 21 Jun 2008 04:12:24 +0200 From: Rene Herman User-Agent: Thunderbird 2.0.0.14 (X11/20080421) MIME-Version: 1.0 To: Bjorn Helgaas CC: Linux Kernel Subject: regression, 2.6.26-rc7, pnp: quirk_system_pci_resources() Content-Type: multipart/mixed; boundary="------------070205030407070909080304" X-Spam-Score: 1.1 (+) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 96414 Lines: 2804 This is a multi-part message in MIME format. --------------070205030407070909080304 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Hi Bjorn. I have been running with pnpacpi=off due to testing ISAPnP/PnPBIOS but when testing some other ACPI related problem tonight I removed that and found that unfortunately something seems to have regressed. My soundcard driver (snd-es1968) won't load anymore on current mainline: === ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Unable to reserve I/O region #1:100@de00 for device 0000:00:0a.0 ACPI: PCI interrupt for device 0000:00:0a.0 disabled ES1968 (ESS Maestro): probe of 0000:00:0a.0 failed with error -16 === 00:01 (PNP0c02) is keeping its I/O region occupied: === # cat /sys/bus/pnp/devices/00\:01/resources state = active io 0xde00-0xde03 === Sound used to work back when I wasn't yet booting with pnpacpi=off but I don't quite recall when I started doing that nor have I looked yet at why quirk_system_pci_resources() isn't doing its job. I'll investigate if you need me to but thought I'd first throw a heap of information your way and hope you'll have a patch for me when I wake up :-/ This is vanilla mainline, 2.6.26-rc7. dmesg, dmesg with pnpacpi=off, lspci -vv and .config attached. Also available at http://members.home.nl/rene.herman/2.6.26-rc7/ Rene. --------------070205030407070909080304 Content-Type: text/plain; name="dmesg-2.6.26-rc7-7ixe4" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.6.26-rc7-7ixe4" Linux version 2.6.26-rc7-7ixe4 (rene@7ixe4) (gcc version 4.2.3) #1 PREEMPT Sat Jun 21 03:38:55 CEST 2008 PAT disabled. Not yet verified on this CPU type. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 767MB LOWMEM available. Entering add_active_range(0, 0, 196592) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 196592 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 196592 On node 0 totalpages: 196592 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1504 pages used for memmap Normal zone: 190992 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000FABB0, 0014 (r0 AMI ) ACPI: RSDT 2FFF0000, 0028 (r1 AMIINT 10 MSFT 97) ACPI: FACP 2FFF0030, 0074 (r1 AMIINT 11 MSFT 97) ACPI: DSDT 2FFF00B0, 1E4B (r1 AMD75X IRONGATE 1000 MSFT 100000B) ACPI: FACS 2FFF8000, 0040 ACPI: PM-Timer IO Port: 0x5008 Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195056 Kernel command line: auto BOOT_IMAGE=rc ro root=806 reboot=w Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (0193e000) Enabling fast FPU save and restore... done. Initializing CPU#0 CPU 0 irqstacks, hard=c12d6000 soft=c12d5000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1312.974 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 775520k/786368k available (1771k kernel code, 10260k reserved, 951k data, 160k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffff5000 - 0xfffff000 ( 40 kB) vmalloc : 0xf0800000 - 0xffff3000 ( 247 MB) lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) .init : 0xc12aa000 - 0xc12d2000 ( 160 kB) .data : 0xc11bafdb - 0xc12a8d70 ( 951 kB) .text : 0xc1000000 - 0xc11bafdb (1771 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 2628.89 BogoMIPS (lpj=5257783) Mount-cache hash table entries: 512 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Duron(tm) Processor stepping 01 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20080321 ACPI: setting ELCR to 0800 (from 1c08) net_namespace: 192 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1 PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: parse allocated resources pnp 00:00: add io 0xcf8-0xcff flags 0x1 pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: parse allocated resources pnp 00:01: add io 0xde00-0xde03 flags 0x1 pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15d pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: parse allocated resources pnp 00:02: add dma 4 flags 0x4 pnp 00:02: add io 0x0-0xf flags 0x0 pnp 00:02: add io 0x81-0x83 flags 0x0 pnp 00:02: add io 0x87-0x87 flags 0x0 pnp 00:02: add io 0x89-0x8b flags 0x0 pnp 00:02: add io 0x8f-0x8f flags 0x0 pnp 00:02: add io 0xc0-0xdf flags 0x0 pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: parse allocated resources pnp 00:03: add io 0x70-0x71 flags 0x0 pnp 00:03: add irq 8 flags 0x1 pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: parse allocated resources pnp 00:04: add io 0x61-0x61 flags 0x0 pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: parse allocated resources pnp 00:05: add io 0xf0-0xff flags 0x0 pnp 00:05: add irq 13 flags 0x1 pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: parse allocated resources pnp 00:06: add io 0x60-0x60 flags 0x0 pnp 00:06: add io 0x64-0x64 flags 0x0 pnp 00:06: add irq 1 flags 0x1 pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:07: parse allocated resources pnp 00:07: add io 0x3f2-0x3f3 flags 0x1 pnp 00:07: add io 0x3f4-0x3f5 flags 0x1 pnp 00:07: add io 0x3f7-0x3f7 flags 0x1 pnp 00:07: add irq 6 flags 0x1 pnp 00:07: add dma 2 flags 0x0 pnp 00:07: parse resource options pnp 00:07: new independent option pnp 00:07: new dependent option (priority 0x0) pnp 00:07: io min 0x3f2 max 0x3f2 align 1 size 2 flags 0x1 pnp 00:07: io min 0x3f4 max 0x3f4 align 1 size 2 flags 0x1 pnp 00:07: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1 pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1 pnp 00:07: dma bitmask 0x4 flags 0x0 pnp 00:07: end dependent options pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:08: parse allocated resources pnp 00:08: add io 0x3f8-0x3ff flags 0x1 pnp 00:08: add irq 4 flags 0x1 pnp 00:08: parse resource options pnp 00:08: new independent option pnp 00:08: new dependent option (priority 0x0) pnp 00:08: io min 0x3f8 max 0x3f8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1 pnp 00:08: new dependent option (priority 0x1) pnp 00:08: io min 0x3f8 max 0x3f8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000c18 flags 0x1 pnp 00:08: new dependent option (priority 0x1) pnp 00:08: io min 0x2f8 max 0x2f8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000c18 flags 0x1 pnp 00:08: new dependent option (priority 0x1) pnp 00:08: io min 0x3e8 max 0x3e8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000c18 flags 0x1 pnp 00:08: new dependent option (priority 0x1) pnp 00:08: io min 0x2e8 max 0x2e8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000c18 flags 0x1 pnp 00:08: end dependent options pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:09: parse allocated resources pnp 00:09: add io 0x378-0x37f flags 0x1 pnp 00:09: add io 0x778-0x77b flags 0x1 pnp 00:09: add irq 7 flags 0x1 pnp 00:09: add dma 3 flags 0x0 pnp 00:09: parse resource options pnp 00:09: new independent option pnp 00:09: new dependent option (priority 0x0) pnp 00:09: io min 0x378 max 0x378 align 1 size 8 flags 0x1 pnp 00:09: io min 0x778 max 0x778 align 1 size 4 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000080 flags 0x1 pnp 00:09: dma bitmask 0x2 flags 0x0 pnp 00:09: new dependent option (priority 0x1) pnp 00:09: io min 0x378 max 0x378 align 1 size 8 flags 0x1 pnp 00:09: io min 0x778 max 0x778 align 1 size 4 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: dma bitmask 0xb flags 0x0 pnp 00:09: new dependent option (priority 0x1) pnp 00:09: io min 0x278 max 0x278 align 1 size 8 flags 0x1 pnp 00:09: io min 0x678 max 0x678 align 1 size 4 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: dma bitmask 0xb flags 0x0 pnp 00:09: new dependent option (priority 0x1) pnp 00:09: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 pnp 00:09: io min 0x7bc max 0x7bc align 1 size 4 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: dma bitmask 0xb flags 0x0 pnp 00:09: new dependent option (priority 0x1) pnp 00:09: io min 0x378 max 0x378 align 1 size 8 flags 0x1 pnp 00:09: io min 0x778 max 0x778 align 1 size 4 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: new dependent option (priority 0x1) pnp 00:09: io min 0x278 max 0x278 align 1 size 8 flags 0x1 pnp 00:09: io min 0x678 max 0x678 align 1 size 4 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: new dependent option (priority 0x1) pnp 00:09: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 pnp 00:09: io min 0x7bc max 0x7bc align 1 size 4 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: end dependent options pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: the driver 'system' has been registered system 00:01: ioport range 0xde00-0xde03 has been reserved system 00:01: driver attached PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: 0xeee00000-0xefefffff PREFETCH window: 0x00000000e2c00000-0x00000000e6cfffff NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Machine check exception polling timer started. msgmni has been set to 1515 io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:05.0: Boot video device input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (FF) as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 ACPI: Sleep Button (FF) [SLPF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: ACPI0007:00 is registered as cooling_device0 isapnp: Scanning for PnP cards... pnp 01:00: new independent option pnp 01:01.00: new dependent option (priority 0x100) pnp 01:01.00: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000020 flags 0x1 pnp 01:01.00: dma bitmask 0x2 flags 0xcc pnp 01:01.00: dma bitmask 0x1 flags 0xcc pnp 01:01.00: io min 0x534 max 0x534 align 4 size 4 flags 0x1 pnp 01:01.00: io min 0x388 max 0x388 align 8 size 4 flags 0x1 pnp 01:01.00: io min 0x220 max 0x220 align 32 size 16 flags 0x1 pnp 01:01.00: end dependent options pnp 01:01: new independent option pnp 01:01.01: new dependent option (priority 0x100) pnp 01:01.01: io min 0x201 max 0x201 align 1 size 1 flags 0x1 pnp 01:01.01: end dependent options pnp 01:02: new independent option pnp 01:01.02: new dependent option (priority 0x100) pnp 01:01.02: io min 0x538 max 0x538 align 8 size 8 flags 0x1 pnp 01:01.02: end dependent options pnp 01:03: new independent option pnp 01:01.03: new dependent option (priority 0x100) pnp 01:01.03: io min 0x300 max 0x300 align 8 size 2 flags 0x1 pnp 01:01.03: end dependent options pnp 01:04: new independent option pnp 01:01.04: new dependent option (priority 0x100) pnp 01:01.04: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000200 flags 0x1 pnp 01:01.04: io min 0x330 max 0x330 align 8 size 4 flags 0x1 pnp 01:01.04: end dependent options pnp 01:05: new independent option pnp 01:01.05: new dependent option (priority 0x100) pnp 01:01.05: io min 0x328 max 0x328 align 8 size 1 flags 0x1 pnp 01:01.05: end dependent options pnp 01:00: new independent option pnp 01:02.00: new dependent option (priority 0x100) pnp 01:02.00: io min 0x590 max 0x590 align 1 size 1 flags 0x1 pnp 01:02.00: io min 0x591 max 0x591 align 1 size 1 flags 0x1 pnp 01:02.00: new dependent option (priority 0x101) pnp 01:02.00: io min 0x590 max 0x5a8 align 8 size 1 flags 0x1 pnp 01:02.00: io min 0x591 max 0x5a9 align 8 size 1 flags 0x1 pnp 01:02.00: new dependent option (priority 0x102) pnp 01:02.00: io min 0x590 max 0x5c8 align 8 size 1 flags 0x1 pnp 01:02.00: io min 0x591 max 0x5c9 align 8 size 1 flags 0x1 pnp 01:02.00: end dependent options 01:02: invalid checksum 0x52 01:01: card 'AudioSystem EWS64' 01:02: card 'TerraTec ActiveRadio' isapnp: 2 Plug & Play cards detected total Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 agpgart: Detected AMD Irongate chipset agpgart: AGP aperture is 64M @ 0xe8000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized mga 3.2.1 20051102 on minor 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ 3 3c59x: Donald Becker and others. 0000:00:08.0: 3Com PCI 3c905C Tornado at f0818e80. console [netcon0] enabled netconsole: network logging started Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods pata_amd 0000:00:07.1: version 0.3.10 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Switched to high resolution mode on CPU 0 ata1.00: ATA-8: WDC WD5000AAKB-00YSA0, 12.01C02, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 ata1.00: configured for UDMA/66 ata2.00: ATAPI: PLEXTOR CD-R PREMIUM, 1.07, max UDMA/33 ata2.01: ATAPI: PLEXTOR DVD-ROM PX-116A, 1.00, max UDMA/66 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/66 scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 12.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM PLEXTOR CD-R PREMIUM 1.07 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 1:0:1:0: CD-ROM PLEXTOR DVD-ROM PX-116A 1.00 PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr 1:0:1:0: Attached scsi CD-ROM sr1 sr 1:0:1:0: Attached scsi generic sg2 type 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:09.2[C] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ehci_hcd 0000:00:09.2: EHCI Host Controller ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:09.2: irq 12, io mem 0xefffff00 ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:07.4[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:07.4: OHCI Host Controller ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:07.4: irq 12, io mem 0xefffc000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:09.0: OHCI Host Controller ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:09.0: irq 11, io mem 0xefffd000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:09.1[B] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:09.1: OHCI Host Controller ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:09.1: irq 10, io mem 0xefffe000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: new low speed USB device using ohci_hcd and address 2 Initializing USB Mass Storage driver... usb 2-1: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using ohci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected usbcore: registered new interface driver usb-storage USB Mass Storage support registered. pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:06: driver attached pnp: the driver 'i8042 aux' has been registered PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 cpuidle: using governor ladder cpuidle: using governor menu input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.4/usb2/2-1/2-1:1.0/input/input4 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:07.4-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 6 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 160k freed Adding 8388600k swap on /dev/sda5. Priority:-1 extents:1 across:8388600k EXT3 FS on sda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: setting full-duplex. RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). --------------070205030407070909080304 Content-Type: text/plain; name="dmesg-2.6.26-rc7-7ixe4-pnpbios" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.6.26-rc7-7ixe4-pnpbios" Linux version 2.6.26-rc7-7ixe4 (rene@7ixe4) (gcc version 4.2.3) #1 PREEMPT Sat Jun 21 03:38:55 CEST 2008 PAT disabled. Not yet verified on this CPU type. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 767MB LOWMEM available. Entering add_active_range(0, 0, 196592) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 196592 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 196592 On node 0 totalpages: 196592 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1504 pages used for memmap Normal zone: 190992 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000FABB0, 0014 (r0 AMI ) ACPI: RSDT 2FFF0000, 0028 (r1 AMIINT 10 MSFT 97) ACPI: FACP 2FFF0030, 0074 (r1 AMIINT 11 MSFT 97) ACPI: DSDT 2FFF00B0, 1E4B (r1 AMD75X IRONGATE 1000 MSFT 100000B) ACPI: FACS 2FFF8000, 0040 ACPI: PM-Timer IO Port: 0x5008 Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195056 Kernel command line: BOOT_IMAGE=rc ro root=806 reboot=w pnpacpi=off Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (0193e000) Enabling fast FPU save and restore... done. Initializing CPU#0 CPU 0 irqstacks, hard=c12d6000 soft=c12d5000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1313.094 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 775520k/786368k available (1771k kernel code, 10260k reserved, 951k data, 160k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffff5000 - 0xfffff000 ( 40 kB) vmalloc : 0xf0800000 - 0xffff3000 ( 247 MB) lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) .init : 0xc12aa000 - 0xc12d2000 ( 160 kB) .data : 0xc11bafdb - 0xc12a8d70 ( 951 kB) .text : 0xc1000000 - 0xc11bafdb (1771 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 2628.91 BogoMIPS (lpj=5257820) Mount-cache hash table entries: 512 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Duron(tm) Processor stepping 01 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20080321 ACPI: setting ELCR to 0800 (from 1c08) net_namespace: 192 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1 PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f7740 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6634, dseg 0xf0000 pnp 00:00: parse allocated resources pnp 00:00: add mem 0x0-0x9fbff flags 0x0 pnp 00:00: add mem 0x9fc00-0x9ffff flags 0x0 pnp 00:00: add mem 0xf0000-0xfffff flags 0x0 pnp 00:00: add mem 0x100000-0x2ffeffff flags 0x0 pnp 00:00: add mem 0x2fff0000-0x2fff7fff flags 0x0 pnp 00:00: add mem 0x2fff8000-0x2fffffff flags 0x0 pnp 00:00: add mem 0xffff0000-0xffffffff flags 0x0 pnp 00:00: parse resource options pnp 00:00: new independent option pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x15d pnp 00:00: Plug and Play BIOS device, IDs PNP0c01 (active) pnp 00:01: parse allocated resources pnp 00:01: add io 0x20-0x21 flags 0x0 pnp 00:01: add io 0xa0-0xa1 flags 0x0 pnp 00:01: add irq 2 flags 0x0 pnp 00:01: parse resource options pnp 00:01: new independent option pnp 00:01: Plug and Play BIOS device, IDs PNP0000 (active) pnp 00:02: parse allocated resources pnp 00:02: add dma 4 flags 0x0 pnp 00:02: add io 0x0-0xf flags 0x0 pnp 00:02: add io 0x80-0x90 flags 0x0 pnp 00:02: add io 0x94-0x9f flags 0x0 pnp 00:02: add io 0xc0-0xde flags 0x0 pnp 00:02: parse resource options pnp 00:02: new independent option pnp 00:02: Plug and Play BIOS device, IDs PNP0200 (active) pnp 00:03: parse allocated resources pnp 00:03: add irq 0 flags 0x0 pnp 00:03: add io 0x40-0x43 flags 0x0 pnp 00:03: parse resource options pnp 00:03: new independent option pnp 00:03: Plug and Play BIOS device, IDs PNP0100 (active) pnp 00:04: parse allocated resources pnp 00:04: add irq 8 flags 0x0 pnp 00:04: add io 0x70-0x71 flags 0x0 pnp 00:04: parse resource options pnp 00:04: new independent option pnp 00:04: Plug and Play BIOS device, IDs PNP0b00 (active) pnp 00:05: parse allocated resources pnp 00:05: add irq 1 flags 0x0 pnp 00:05: add io 0x60-0x60 flags 0x0 pnp 00:05: add io 0x64-0x64 flags 0x0 pnp 00:05: parse resource options pnp 00:05: new independent option pnp 00:05: Plug and Play BIOS device, IDs PNP0303 (active) pnp 00:06: parse allocated resources pnp 00:06: add io 0x61-0x61 flags 0x0 pnp 00:06: parse resource options pnp 00:06: new independent option pnp 00:06: Plug and Play BIOS device, IDs PNP0800 (active) pnp 00:07: parse allocated resources pnp 00:07: add irq 13 flags 0x0 pnp 00:07: add io 0xf0-0xff flags 0x0 pnp 00:07: parse resource options pnp 00:07: new independent option pnp 00:07: Plug and Play BIOS device, IDs PNP0c04 (active) pnp 00:08: parse allocated resources pnp 00:08: add io 0x3f8-0x3ff flags 0x0 pnp 00:08: add irq 4 flags 0x0 pnp 00:08: parse resource options pnp 00:08: new independent option pnp 00:08: new dependent option (priority 0x101) pnp 00:08: io min 0x3f8 max 0x3f8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1 pnp 00:08: new dependent option (priority 0x101) pnp 00:08: io min 0x2f8 max 0x2f8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1 pnp 00:08: new dependent option (priority 0x101) pnp 00:08: io min 0x3e8 max 0x3e8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1 pnp 00:08: new dependent option (priority 0x101) pnp 00:08: io min 0x2e8 max 0x2e8 align 4 size 8 flags 0x1 pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1 pnp 00:08: Plug and Play BIOS device, IDs PNP0501 (active) pnp 00:09: parse allocated resources pnp 00:09: add io 0x378-0x37f flags 0x0 pnp 00:09: add io 0x778-0x77a flags 0x0 pnp 00:09: add irq 7 flags 0x0 pnp 00:09: add dma 3 flags 0x0 pnp 00:09: parse resource options pnp 00:09: new independent option pnp 00:09: new dependent option (priority 0x101) pnp 00:09: io min 0x378 max 0x378 align 4 size 8 flags 0x1 pnp 00:09: io min 0x778 max 0x778 align 4 size 3 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: dma bitmask 0xb flags 0xc pnp 00:09: new dependent option (priority 0x101) pnp 00:09: io min 0x278 max 0x278 align 4 size 8 flags 0x1 pnp 00:09: io min 0x678 max 0x678 align 4 size 3 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: dma bitmask 0xb flags 0xc pnp 00:09: new dependent option (priority 0x101) pnp 00:09: io min 0x3bc max 0x3bc align 4 size 4 flags 0x1 pnp 00:09: io min 0x7bc max 0x7bc align 4 size 3 flags 0x1 pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000a0 flags 0x1 pnp 00:09: dma bitmask 0xb flags 0xc pnp 00:09: Plug and Play BIOS device, IDs PNP0401 (active) pnp 00:0a: parse allocated resources pnp 00:0a: add io 0x3f0-0x3f5 flags 0x0 pnp 00:0a: add irq 6 flags 0x0 pnp 00:0a: add dma 2 flags 0x0 pnp 00:0a: parse resource options pnp 00:0a: new independent option pnp 00:0a: new dependent option (priority 0x101) pnp 00:0a: io min 0x3f0 max 0x3f0 align 4 size 6 flags 0x1 pnp 00:0a: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1 pnp 00:0a: dma bitmask 0x4 flags 0xc pnp 00:0a: Plug and Play BIOS device, IDs PNP0700 (active) pnp 00:0b: parse allocated resources pnp 00:0b: add io 0x5000-0x507f flags 0x0 pnp 00:0b: add io 0x5080-0x50ff flags 0x0 pnp 00:0b: add io 0x4d0-0x4d1 flags 0x0 pnp 00:0b: add io 0xcf8-0xcff flags 0x0 pnp 00:0b: add io 0x294-0x297 flags 0x0 pnp 00:0b: parse resource options pnp 00:0b: new independent option pnp 00:0b: Plug and Play BIOS device, IDs PNP0a03 (active) PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: the driver 'system' has been registered system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved system 00:00: iomem range 0x2fff0000-0x2fff7fff could not be reserved system 00:00: iomem range 0x2fff8000-0x2fffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved system 00:00: driver attached PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: 0xeee00000-0xefefffff PREFETCH window: 0x00000000e2c00000-0x00000000e6cfffff NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Machine check exception polling timer started. msgmni has been set to 1515 io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:05.0: Boot video device input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (FF) as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 ACPI: Sleep Button (FF) [SLPF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: ACPI0007:00 is registered as cooling_device0 isapnp: Scanning for PnP cards... pnp 01:00: new independent option pnp 01:01.00: new dependent option (priority 0x100) pnp 01:01.00: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000020 flags 0x1 pnp 01:01.00: dma bitmask 0x2 flags 0xcc pnp 01:01.00: dma bitmask 0x1 flags 0xcc pnp 01:01.00: io min 0x534 max 0x534 align 4 size 4 flags 0x1 pnp 01:01.00: io min 0x388 max 0x388 align 8 size 4 flags 0x1 pnp 01:01.00: io min 0x220 max 0x220 align 32 size 16 flags 0x1 pnp 01:01.00: end dependent options pnp 01:01: new independent option pnp 01:01.01: new dependent option (priority 0x100) pnp 01:01.01: io min 0x201 max 0x201 align 1 size 1 flags 0x1 pnp 01:01.01: end dependent options pnp 01:02: new independent option pnp 01:01.02: new dependent option (priority 0x100) pnp 01:01.02: io min 0x538 max 0x538 align 8 size 8 flags 0x1 pnp 01:01.02: end dependent options pnp 01:03: new independent option pnp 01:01.03: new dependent option (priority 0x100) pnp 01:01.03: io min 0x300 max 0x300 align 8 size 2 flags 0x1 pnp 01:01.03: end dependent options pnp 01:04: new independent option pnp 01:01.04: new dependent option (priority 0x100) pnp 01:01.04: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000200 flags 0x1 pnp 01:01.04: io min 0x330 max 0x330 align 8 size 4 flags 0x1 pnp 01:01.04: end dependent options pnp 01:05: new independent option pnp 01:01.05: new dependent option (priority 0x100) pnp 01:01.05: io min 0x328 max 0x328 align 8 size 1 flags 0x1 pnp 01:01.05: end dependent options pnp 01:00: new independent option pnp 01:02.00: new dependent option (priority 0x100) pnp 01:02.00: io min 0x590 max 0x590 align 1 size 1 flags 0x1 pnp 01:02.00: io min 0x591 max 0x591 align 1 size 1 flags 0x1 pnp 01:02.00: new dependent option (priority 0x101) pnp 01:02.00: io min 0x590 max 0x5a8 align 8 size 1 flags 0x1 pnp 01:02.00: io min 0x591 max 0x5a9 align 8 size 1 flags 0x1 pnp 01:02.00: new dependent option (priority 0x102) pnp 01:02.00: io min 0x590 max 0x5c8 align 8 size 1 flags 0x1 pnp 01:02.00: io min 0x591 max 0x5c9 align 8 size 1 flags 0x1 pnp 01:02.00: end dependent options 01:02: invalid checksum 0x52 01:01: card 'AudioSystem EWS64' 01:02: card 'TerraTec ActiveRadio' isapnp: 2 Plug & Play cards detected total Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 agpgart: Detected AMD Irongate chipset agpgart: AGP aperture is 64M @ 0xe8000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized mga 3.2.1 20051102 on minor 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ 3 3c59x: Donald Becker and others. 0000:00:08.0: 3Com PCI 3c905C Tornado at f0818e80. console [netcon0] enabled netconsole: network logging started Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods pata_amd 0000:00:07.1: version 0.3.10 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata1.00: ATA-8: WDC WD5000AAKB-00YSA0, 12.01C02, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 Switched to high resolution mode on CPU 0 ata1.00: configured for UDMA/66 ata2.00: ATAPI: PLEXTOR CD-R PREMIUM, 1.07, max UDMA/33 ata2.01: ATAPI: PLEXTOR DVD-ROM PX-116A, 1.00, max UDMA/66 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/66 scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 12.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM PLEXTOR CD-R PREMIUM 1.07 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 1:0:1:0: CD-ROM PLEXTOR DVD-ROM PX-116A 1.00 PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr 1:0:1:0: Attached scsi CD-ROM sr1 sr 1:0:1:0: Attached scsi generic sg2 type 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:09.2[C] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ehci_hcd 0000:00:09.2: EHCI Host Controller ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:09.2: irq 12, io mem 0xefffff00 ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:07.4[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:07.4: OHCI Host Controller ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:07.4: irq 12, io mem 0xefffc000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:09.0: OHCI Host Controller ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:09.0: irq 11, io mem 0xefffd000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:09.1[B] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:09.1: OHCI Host Controller ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:09.1: irq 10, io mem 0xefffe000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: new low speed USB device using ohci_hcd and address 2 Initializing USB Mass Storage driver... usb 2-1: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using ohci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected usbcore: registered new interface driver usb-storage USB Mass Storage support registered. pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:05: driver attached pnp: the driver 'i8042 aux' has been registered PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 cpuidle: using governor ladder cpuidle: using governor menu input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.4/usb2/2-1/2-1:1.0/input/input4 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:07.4-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 6 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 160k freed Adding 8388600k swap on /dev/sda5. Priority:-1 extents:1 across:8388600k EXT3 FS on sda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: setting full-duplex. RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). --------------070205030407070909080304 Content-Type: text/plain; name="lspci-2.6.26-rc7-7ixe4" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="lspci-2.6.26-rc7-7ixe4" 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-