Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755424AbYFZHST (ORCPT ); Thu, 26 Jun 2008 03:18:19 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752712AbYFZHSK (ORCPT ); Thu, 26 Jun 2008 03:18:10 -0400 Received: from mxsec.euro-web.fr ([81.93.243.199]:42853 "EHLO mxsec.euro-web.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752300AbYFZHSG convert rfc822-to-8bit (ORCPT ); Thu, 26 Jun 2008 03:18:06 -0400 From: David CHANIAL Organization: Euro Web To: Francois Romieu Subject: Re: weird bug on r8169 with usb Date: Thu, 26 Jun 2008 09:18:02 +0200 User-Agent: KMail/1.9.7 Cc: linux-kernel@vger.kernel.org References: <200806250018.37617.david.ml@euro-web.fr> <20080625185234.GA30834@electric-eye.fr.zoreil.com> In-Reply-To: <20080625185234.GA30834@electric-eye.fr.zoreil.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-Id: <200806260918.03073.david.ml@euro-web.fr> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 35266 Lines: 755 Le Wednesday 25 June 2008 20:52:34 Francois Romieu, vous avez ?crit?: > Yes, please send the unabbreviated output of 'lspci -vx' and 'dmesg'. Hi Francois, thanks for your time, Both are below. (After a boot without usb devices plugger, devices was plugger after the end of boot) # lspci -vx 00:00.0 Host bridge: Intel Corporation DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00: 86 80 c0 29 06 00 90 20 02 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge: Intel Corporation PCI Express Root Port (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-feafffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000 Capabilities: [80] Power Management version 3 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Kernel driver in use: pcieport-driver 00: 86 80 c1 29 07 01 10 00 02 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 d0 d0 00 00 20: 00 fa a0 fe 01 d0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 88 00 00 00 00 00 00 00 05 01 1a 00 00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at b400 [size=32] Capabilities: [50] PCIe advanced features Kernel driver in use: uhci_hcd 00: 86 80 37 29 05 00 90 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 b4 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0, IRQ 21 I/O ports at b480 [size=32] Capabilities: [50] PCIe advanced features Kernel driver in use: uhci_hcd 00: 86 80 38 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 b4 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 02 00 00 00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at f9efec00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features Kernel driver in use: ehci_hcd 00: 86 80 3c 29 06 00 90 02 02 20 03 0c 00 00 00 00 10: 00 ec ef f9 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 03 00 00 00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at f9ef4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: HDA Intel 00: 86 80 3e 29 06 00 10 00 02 00 03 04 08 00 00 00 10: 04 40 ef f9 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00 00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 2a6f Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport-driver 00: 86 80 40 29 04 01 10 00 02 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 02 00 00:1c.2 PCI bridge: Intel Corporation PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 2a6f Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport-driver 00: 86 80 44 29 07 01 10 00 02 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 e0 e0 00 00 20: b0 fe b0 fe f1 f8 f1 f8 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 02 00 00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at b800 [size=32] Capabilities: [50] PCIe advanced features Kernel driver in use: uhci_hcd 00: 86 80 34 29 05 00 90 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 b8 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 0e 01 00 00 00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at b880 [size=32] Capabilities: [50] PCIe advanced features Kernel driver in use: uhci_hcd 00: 86 80 35 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 b8 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 02 00 00 00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at bc00 [size=32] Capabilities: [50] PCIe advanced features Kernel driver in use: uhci_hcd 00: 86 80 36 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 bc 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 03 00 00 00:1d.3 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at c000 [size=32] Capabilities: [50] PCIe advanced features Kernel driver in use: uhci_hcd 00: 86 80 39 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 c0 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 00 00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f9eff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features Kernel driver in use: ehci_hcd 00: 86 80 3a 29 06 00 90 02 02 20 03 0c 00 00 00 00 10: 00 f8 ef f9 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 50 00 00 00 00 00 00 00 0e 01 00 00 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: f9f00000-f9ffffff Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 2a6f 00: 86 80 4e 24 06 01 10 00 92 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 22 20: f0 f9 f0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 02 00 00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00: 86 80 16 29 07 00 10 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at c880 [size=8] I/O ports at c800 [size=4] I/O ports at c480 [size=8] I/O ports at c400 [size=4] I/O ports at c080 [size=32] Memory at f9eff000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA Capabilities: [b0] PCIe advanced features Kernel driver in use: ahci 00: 86 80 22 28 07 00 b0 02 02 00 04 01 00 00 00 00 10: 81 c8 00 00 01 c8 00 00 81 c4 00 00 01 c4 00 00 20: 81 c0 00 00 00 f0 ef f9 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00 00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: medium devsel, IRQ 10 Memory at f9effc00 (64-bit, non-prefetchable) [size=256] I/O ports at 0400 [size=32] 00: 86 80 30 29 03 00 80 02 02 00 05 0c 00 00 00 00 10: 04 fc ef f9 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00 01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at f9fff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci1394 00: c1 11 11 58 16 00 90 02 70 10 00 0c 08 40 00 00 10: 00 f0 ff f9 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 00 00 44 00 00 00 00 00 00 00 04 01 0c 18 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Hewlett-Packard Company Unknown device 2a6f Flags: bus master, fast devsel, latency 0, IRQ 18 I/O ports at e800 [size=256] Memory at febff000 (64-bit, non-prefetchable) [size=4K] Memory at f8ff0000 (64-bit, prefetchable) [size=64K] Expansion ROM at febc0000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2 Capabilities: [d0] Vital Product Data Kernel driver in use: r8169 00: ec 10 68 81 07 00 10 00 02 00 00 02 08 00 00 00 10: 01 e8 00 00 00 00 00 00 04 f0 bf fe 00 00 00 00 20: 0c 00 ff f8 00 00 00 00 00 00 00 00 3c 10 6f 2a 30: 00 00 bc fe 40 00 00 00 00 00 00 00 0a 01 00 00 04:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Unknown device 034e Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] Expansion ROM at feae0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: nvidia Kernel modules: nvidia 00: de 10 02 04 07 00 10 00 a1 00 00 03 00 00 00 00 10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fa 20: 00 00 00 00 01 dc 00 00 00 00 00 00 43 10 4e 03 30: 00 00 ae fe 60 00 00 00 00 00 00 00 05 01 00 00 # dmesg PI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 6:15 APIC version 20 ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227584 Kernel command line: root=/dev/sda3 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2400.082 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 903184k/917504k available (3795k kernel code, 13828k reserved, 1361k data, 284k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB) vmalloc : 0xf8800000 - 0xfffb3000 ( 119 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0611000 - 0xc0658000 ( 284 kB) .data : 0xc04b4eaa - 0xc060937c (1361 kB) .text : 0xc0100000 - 0xc04b4eaa (3795 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 4804.11 BogoMIPS (lpj=9608236) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Booting processor 1/1 ip 4000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.21 BogoMIPS (lpj=9600435) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Booting processor 2/2 ip 4000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4800.16 BogoMIPS (lpj=9600335) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Booting processor 3/3 ip 4000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4800.40 BogoMIPS (lpj=9600808) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Total of 4 processors activated (19204.90 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. checking TSC synchronization [CPU#0 -> CPU#2]: passed. checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs net_namespace: 544 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0x800-0x87f has been reserved system 00:06: ioport range 0x480-0x4bf has been reserved system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:09: ioport range 0xa00-0xadf has been reserved system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff could not be reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved system 00:0d: iomem range 0x0-0x0 could not be reserved PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: 0xfa000000-0xfeafffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: e000-efff MEM window: 0xfeb00000-0xfebfffff PREFETCH window: 0x00000000f8f00000-0x00000000f8ffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 0xf9f00000-0xf9ffffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1214343094.560:1): initialized NTFS driver 2.1.29 [Flags: R/W]. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:04:00.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] lp: driver loaded but no devices found Linux agpgart interface v0.103 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: SSDT CFFC0270, 0277 (r1 HPQOEM SLIC-CPC 11 INTL 20051117) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: SSDT CFFC0700, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: SSDT CFFC0B90, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117) ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: SSDT CFFC1020, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117) ACPI: ACPI0007:03 is registered as cooling_device3 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled brd: module loaded loop: module loaded tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:00.0 to 64 r8169 0000:02:00.0: no MSI. Back to INTx. eth0: RTL8168c/8111c at 0xf8828000, 00:1e:8c:c4:66:7d, XID 3c2000c0 IRQ 18 Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 19 ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 19 ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 19 ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 19 ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 19 ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVD-RW GSA-H60L, DC08, max UDMA/100 ata2.00: configured for UDMA/100 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: Hitachi HDS721075KLA330, GK8OA87A, max UDMA/133 ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GSA-H60L DC08 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72107 GK8O PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 2:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg2 type 0 ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 20 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[f9fff000-f9fff7ff] Max Packet=[1024] IR/IT contexts=[8/8] ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9efec00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9eff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new high speed USB device using ehci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 1-1: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 2-5: new high speed USB device using ehci_hcd and address 2 usb 2-5: configuration #1 chosen from 1 choice hub 2-5:1.0: USB hub found hub 2-5:1.0: 4 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000106b1f9] hub 2-0:1.0: unable to enumerate USB device on port 8 usb 8-2: new low speed USB device using uhci_hcd and address 2 usb 8-2: configuration #1 chosen from 1 choice usb 2-5.1: new low speed USB device using ehci_hcd and address 4 usb 2-5.1: configuration #1 chosen from 1 choice usb 2-5.2: new high speed USB device using ehci_hcd and address 5 usb 2-5.2: configuration #1 chosen from 1 choice usb 2-5.4: new full speed USB device using ehci_hcd and address 6 usb 2-5.4: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input2 input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.3-2 input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input3 input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.3-2 HID device claimed by neither input, hiddev nor hidraw input: Logitech USB Receiver as /class/input/input4 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-5.4 input: Logitech USB Receiver as /class/input/input5 input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-5.4 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC). ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ALSA device list: #0: HDA Intel at 0xf9ef4000 irq 22 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Starting balanced_irq Using IPI No-Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 284k freed nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:04:00.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008 EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 506036k swap on /dev/sda2. Priority:-1 extents:1 across:506036k scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS sd 6:0:0:0: [sdc] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg3 type 0 usb-storage: device scan complete r8169: eth0: link up r8169: eth0: link up eth0: no IPv6 routers present -- David CHANIAL - Euro Web SARL http://www.euro-web.fr/ Conseil & Infog?rance Location de serveurs -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/