Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758301AbYFZXRu (ORCPT ); Thu, 26 Jun 2008 19:17:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753961AbYFZXRi (ORCPT ); Thu, 26 Jun 2008 19:17:38 -0400 Received: from casper.infradead.org ([85.118.1.10]:35047 "EHLO casper.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751966AbYFZXRc (ORCPT ); Thu, 26 Jun 2008 19:17:32 -0400 Date: Thu, 26 Jun 2008 16:15:51 -0700 From: Greg KH To: mchehab@infradead.org Cc: v4l-dvb-maintainer@linuxtv.org, video4linux-list@redhat.com, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, dean@sensoray.com Subject: [PATCH] add Sensoray 2255 v4l driver Message-ID: <20080626231551.GA20012@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.16 (2007-06-09) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 69492 Lines: 2542 From: Dean Anderson This driver adds support for the Sensoray 2255 devices. It was primarily developed by Dean Anderson with only a little bit of guidance and cleanup by Greg. Signed-off-by: Dean Anderson Signed-off-by: Greg Kroah-Hartman --- All of the previous review comments have been addressed in this version. Mauro, can you apply this to your tree if there are no other objections? drivers/media/video/Kconfig | 9 drivers/media/video/Makefile | 1 drivers/media/video/s2255drv.c | 2486 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 2496 insertions(+) --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -897,6 +897,15 @@ config USB_STKWEBCAM To compile this driver as a module, choose M here: the module will be called stkwebcam. +config USB_S2255 + tristate "USB Sensoray 2255 video capture device" + depends on VIDEO_V4L2 + select VIDEOBUF_VMALLOC + default n + help + Say Y here if you want support for the Sensoray 2255 USB device. + This driver can be compiled as a module, called s2255drv. + endif # V4L_USB_DRIVERS config SOC_CAMERA --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -122,6 +122,7 @@ obj-$(CONFIG_USB_IBMCAM) += usbvi obj-$(CONFIG_USB_KONICAWC) += usbvideo/ obj-$(CONFIG_USB_VICAM) += usbvideo/ obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/ +obj-$(CONFIG_USB_S2255) += s2255drv.o obj-$(CONFIG_VIDEO_IVTV) += ivtv/ obj-$(CONFIG_VIDEO_CX18) += cx18/ --- /dev/null +++ b/drivers/media/video/s2255drv.c @@ -0,0 +1,2486 @@ +/* + * s2255drv.c - a driver for the Sensoray 2255 USB video capture device + * + * Copyright (C) 2007-2008 by Sensoray Company Inc. + * Dean Anderson + * + * Some video buffer code based on vivi driver: + * + * Sensoray 2255 device supports 4 simultaneous channels. + * The channels are not "crossbar" inputs, they are physically + * attached to separate video decoders. + * + * Because of USB2.0 bandwidth limitations. There is only a + * certain amount of data which may be transferred at one time. + * + * Example maximum bandwidth utilization: + * + * -full size, color mode YUYV or YUV422P: 2 channels at once + * + * -full or half size Grey scale: all 4 channels at once + * + * -half size, color mode YUYV or YUV422P: all 4 channels at once + * + * -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels + * at once. + * (TODO: Incorporate videodev2 frame rate(FR) enumeration, + * which is currently experimental.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define FIRMWARE_FILE_NAME "f2255usb.bin" + + + +/* vendor request in */ +#define S2255_VR_IN 0 +/* vendor request out */ +#define S2255_VR_OUT 1 +/* firmware query */ +#define S2255_VR_FW 0x30 +/* USB endpoint number for configuring the device */ +#define S2255_CONFIG_EP 2 +/* maximum time for DSP to start responding after last FW word loaded(ms) */ +#define S2255_DSP_BOOTTIME 400 +/* maximum time to wait for firmware to load (ms) */ +#define S2255_LOAD_TIMEOUT (5000+S2255_DSP_BOOTTIME) +#define S2255_DEF_BUFS 16 +#define MAX_CHANNELS 4 +#define FRAME_MARKER 0x2255DA4AL +#define MAX_PIPE_USBBLOCK (40*1024) +#define DEFAULT_PIPE_USBBLOCK (16*1024) +#define MAX_CHANNELS 4 +#define MAX_PIPE_BUFFERS 1 +#define SYS_FRAMES 4 +/* maximum size is PAL full size plus room for the marker header(s) */ +#define SYS_FRAMES_MAXSIZE (720*288*2*2 + 4096) +#define DEF_USB_BLOCK (4096) +#define LINE_SZ_4CIFS_NTSC 640 +#define LINE_SZ_2CIFS_NTSC 640 +#define LINE_SZ_1CIFS_NTSC 320 +#define LINE_SZ_4CIFS_PAL 704 +#define LINE_SZ_2CIFS_PAL 704 +#define LINE_SZ_1CIFS_PAL 352 +#define NUM_LINES_4CIFS_NTSC 240 +#define NUM_LINES_2CIFS_NTSC 240 +#define NUM_LINES_1CIFS_NTSC 240 +#define NUM_LINES_4CIFS_PAL 288 +#define NUM_LINES_2CIFS_PAL 288 +#define NUM_LINES_1CIFS_PAL 288 +#define LINE_SZ_DEF 640 +#define NUM_LINES_DEF 240 + + +/* predefined settings */ +#define FORMAT_NTSC 1 +#define FORMAT_PAL 2 + +#define SCALE_4CIFS 1 /* 640x480(NTSC) or 704x576(PAL) */ +#define SCALE_2CIFS 2 /* 640x240(NTSC) or 704x288(PAL) */ +#define SCALE_1CIFS 3 /* 320x240(NTSC) or 352x288(PAL) */ + +#define COLOR_YUVPL 1 /* YUV planar */ +#define COLOR_YUVPK 2 /* YUV packed */ +#define COLOR_Y8 4 /* monochrome */ + +/* frame decimation. Not implemented by V4L yet(experimental in V4L) */ +#define FDEC_1 1 /* capture every frame. default */ +#define FDEC_2 2 /* capture every 2nd frame */ +#define FDEC_3 3 /* capture every 3rd frame */ +#define FDEC_5 5 /* capture every 5th frame */ + +/*------------------------------------------------------- + * Default mode parameters. + *-------------------------------------------------------*/ +#define DEF_SCALE SCALE_4CIFS +#define DEF_COLOR COLOR_YUVPL +#define DEF_FDEC FDEC_1 +#define DEF_BRIGHT 0 +#define DEF_CONTRAST 0x5c +#define DEF_SATURATION 0x80 +#define DEF_HUE 0 + +/* usb config commands */ +#define IN_DATA_TOKEN 0x2255c0de +#define CMD_2255 0xc2255000 +#define CMD_SET_MODE (CMD_2255 | 0x10) +#define CMD_START (CMD_2255 | 0x20) +#define CMD_STOP (CMD_2255 | 0x30) +#define CMD_STATUS (CMD_2255 | 0x40) + +struct s2255_mode { + u32 format; /* input video format (NTSC, PAL) */ + u32 scale; /* output video scale */ + u32 color; /* output video color format */ + u32 fdec; /* frame decimation */ + u32 bright; /* brightness */ + u32 contrast; /* contrast */ + u32 saturation; /* saturation */ + u32 hue; /* hue (NTSC only)*/ + u32 single; /* capture 1 frame at a time (!=0), continuously (==0)*/ + u32 usb_block; /* block size. should be 4096 of DEF_USB_BLOCK */ + u32 restart; /* if DSP requires restart */ +}; + +/* frame structure */ +#define FRAME_STATE_UNUSED 0 +#define FRAME_STATE_FILLING 1 +#define FRAME_STATE_FULL 2 + + +struct s2255_framei { + unsigned long size; + + unsigned long ulState; /* ulState ==0 unused, 1 being filled, 2 full */ + void *lpvbits; /* image data */ + unsigned long cur_size; /* current data copied to it */ +}; + +/* image buffer structure */ +struct s2255_bufferi { + unsigned long dwFrames; /* number of frames in buffer */ + struct s2255_framei frame[SYS_FRAMES]; /* array of FRAME structures */ +}; + +#define DEF_MODEI_NTSC_CONT {FORMAT_NTSC, DEF_SCALE, DEF_COLOR, \ + DEF_FDEC, DEF_BRIGHT, DEF_CONTRAST, DEF_SATURATION, \ + DEF_HUE, 0, DEF_USB_BLOCK, 0 } + +struct s2255_dmaqueue { + struct list_head active; + /* thread for acquisition */ + struct task_struct *kthread; + int frame; + struct s2255_dev *dev; + int channel; +}; + +/* for firmware loading, fw_state */ +#define S2255_FW_NOTLOADED 0 +#define S2255_FW_LOADED_DSPWAIT 1 +#define S2255_FW_SUCCESS 2 +#define S2255_FW_FAILED 3 + +struct s2255_fw { + int fw_loaded; + int fw_size; + struct urb *fw_urb; + atomic_t fw_state; + void *pfw_data; + wait_queue_head_t wait_fw; + struct timer_list dsp_wait; + const struct firmware *fw; +}; + +struct s2255_pipeinfo { + u32 max_transfer_size; + u32 cur_transfer_size; + u8 *transfer_buffer; + u32 transfer_flags;; + u32 state; + u32 prev_state; + u32 urb_size; + void *stream_urb; + void *dev; /* back pointer to s2255_dev struct*/ + u32 err_count; + u32 buf_index; + u32 idx; + u32 priority_set; +}; + +struct s2255_fmt; /*forward declaration */ + +struct s2255_dev { + int frames; + int users[MAX_CHANNELS]; + struct mutex lock; + struct mutex open_lock; + int resources[MAX_CHANNELS]; + struct usb_device *udev; + struct usb_interface *interface; + u8 read_endpoint; + + struct s2255_dmaqueue vidq[MAX_CHANNELS]; + struct video_device *vdev[MAX_CHANNELS]; + struct list_head s2255_devlist; + struct timer_list timer; + struct s2255_fw *fw_data; + int board_num; + int is_open; + struct s2255_pipeinfo pipes[MAX_PIPE_BUFFERS]; + struct s2255_bufferi buffer[MAX_CHANNELS]; + struct s2255_mode mode[MAX_CHANNELS]; + const struct s2255_fmt *cur_fmt[MAX_CHANNELS]; + int cur_frame[MAX_CHANNELS]; + int last_frame[MAX_CHANNELS]; + u32 cc; /* current channel */ + int b_acquire[MAX_CHANNELS]; + unsigned long req_image_size[MAX_CHANNELS]; + int bad_payload[MAX_CHANNELS]; + unsigned long frame_count[MAX_CHANNELS]; + int frame_ready; + struct kref kref; + spinlock_t slock; +}; +#define to_s2255_dev(d) container_of(d, struct s2255_dev, kref) + +struct s2255_fmt { + char *name; + u32 fourcc; + int depth; +}; + +/* buffer for one video frame */ +struct s2255_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + const struct s2255_fmt *fmt; +}; + +struct s2255_fh { + struct s2255_dev *dev; + unsigned int resources; + const struct s2255_fmt *fmt; + unsigned int width; + unsigned int height; + struct videobuf_queue vb_vidq; + enum v4l2_buf_type type; + int channel; + /* mode below is the desired mode. + mode in s2255_dev is the current mode that was last set */ + struct s2255_mode mode; +}; + +#define S2255_MAX_USERS 1 + +#define CUR_USB_FWVER 774 /* current cypress EEPROM firmware version */ +#define S2255_MAJOR_VERSION 1 +#define S2255_MINOR_VERSION 13 +#define S2255_RELEASE 0 +#define S2255_VERSION KERNEL_VERSION(S2255_MAJOR_VERSION, \ + S2255_MINOR_VERSION, \ + S2255_RELEASE) + +/* vendor ids */ +#define USB_S2255_VENDOR_ID 0x1943 +#define USB_S2255_PRODUCT_ID 0x2255 +#define S2255_NORMS (V4L2_STD_PAL | V4L2_STD_NTSC) +/* frame prefix size (sent once every frame) */ +#define PREFIX_SIZE 512 + +/* Channels on box are in reverse order */ +static unsigned long G_chnmap[MAX_CHANNELS] = { 3, 2, 1, 0 }; + +static LIST_HEAD(s2255_devlist); + +static int debug; +static int *s2255_debug = &debug; + +static int s2255_start_readpipe(struct s2255_dev *dev); +static void s2255_stop_readpipe(struct s2255_dev *dev); +static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn); +static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn); +static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, + int chn); +static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, + struct s2255_mode *mode); +static int s2255_board_shutdown(struct s2255_dev *dev); +static void s2255_exit_v4l(struct s2255_dev *dev); +static void s2255_fwload_start(struct s2255_dev *dev); + +#define dprintk(level, fmt, arg...) \ + do { \ + if (*s2255_debug >= (level)) { \ + printk(KERN_DEBUG "s2255: " fmt, ##arg); \ + } \ + } while (0) + + +static struct usb_driver s2255_driver; + + +/* Declare static vars that will be used as parameters */ +static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ + +/* start video number */ +static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level(0-100) default 0"); +module_param(vid_limit, int, 0); +MODULE_PARM_DESC(vid_limit, "video memory limit(Mb)"); +module_param(video_nr, int, 0); +MODULE_PARM_DESC(video_nr, "start video minor(-1 default autodetect)"); + +/* USB device table */ +static struct usb_device_id s2255_table[] = { + {USB_DEVICE(USB_S2255_VENDOR_ID, USB_S2255_PRODUCT_ID)}, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, s2255_table); + + +#define BUFFER_TIMEOUT msecs_to_jiffies(400) + +/* supported controls */ +static struct v4l2_queryctrl s2255_qctrl[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = -127, + .maximum = 128, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = DEF_CONTRAST, + .flags = 0, + }, { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = DEF_SATURATION, + .flags = 0, + }, { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = DEF_HUE, + .flags = 0, + } +}; + +static int qctl_regs[ARRAY_SIZE(s2255_qctrl)]; + +/* image formats. */ +static const struct s2255_fmt formats[] = { + { + .name = "4:2:2, planar, YUV422P", + .fourcc = V4L2_PIX_FMT_YUV422P, + .depth = 16 + + }, { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16 + + }, { + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16 + }, { + .name = "8bpp GREY", + .fourcc = V4L2_PIX_FMT_GREY, + .depth = 8 + } +}; + +static int norm_maxw(struct video_device *vdev) +{ + return (vdev->current_norm & V4L2_STD_NTSC) ? + LINE_SZ_4CIFS_NTSC : LINE_SZ_4CIFS_PAL; +} + +static int norm_maxh(struct video_device *vdev) +{ + return (vdev->current_norm & V4L2_STD_NTSC) ? + (NUM_LINES_1CIFS_NTSC * 2) : (NUM_LINES_1CIFS_PAL * 2); +} + +static int norm_minw(struct video_device *vdev) +{ + return (vdev->current_norm & V4L2_STD_NTSC) ? + LINE_SZ_1CIFS_NTSC : LINE_SZ_1CIFS_PAL; +} + +static int norm_minh(struct video_device *vdev) +{ + return (vdev->current_norm & V4L2_STD_NTSC) ? + (NUM_LINES_1CIFS_NTSC) : (NUM_LINES_1CIFS_PAL); +} + + +/* converts 2255 planar format to yuyv or uyvy */ +static void planar422p_to_yuv_packed(const unsigned char *in, + unsigned char *out, + int width, int height, + int fmt) +{ + unsigned char *pY; + unsigned char *pCb; + unsigned char *pCr; + unsigned long size = height * width; + unsigned int i; + pY = (unsigned char *)in; + pCr = (unsigned char *)in + height * width; + pCb = (unsigned char *)in + height * width + (height * width / 2); + for (i = 0; i < size * 2; i += 4) { + out[i] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCr++; + out[i + 1] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCr++ : *pY++; + out[i + 2] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCb++; + out[i + 3] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCb++ : *pY++; + } + return; +} + + +/* kickstarts the firmware loading. from probe + */ +static void s2255_timer(unsigned long user_data) +{ + struct s2255_fw *data = (struct s2255_fw *)user_data; + dprintk(100, "s2255 timer\n"); + if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) { + printk(KERN_ERR "s2255: can't submit urb\n"); + if (data->fw) { + release_firmware(data->fw); + data->fw = NULL; + } + return; + } +} + +/* called when DSP is up and running. DSP is guaranteed to + be running after S2255_DSP_BOOTTIME */ +static void s2255_dsp_running(unsigned long user_data) +{ + struct s2255_fw *data = (struct s2255_fw *)user_data; + dprintk(1, "dsp running\n"); + atomic_set(&data->fw_state, S2255_FW_SUCCESS); + wake_up(&data->wait_fw); + printk(KERN_INFO "s2255: firmware loaded successfully\n"); + return; +} + + +/* this loads the firmware asynchronously. + Originally this was done synchroously in probe. + But it is better to load it asynchronously here than block + inside the probe function. Blocking inside probe affects boot time. + FW loading is triggered by the timer in the probe function +*/ +static void s2255_fwchunk_complete(struct urb *urb) +{ + struct s2255_fw *data = urb->context; + struct usb_device *udev = urb->dev; + int len; + dprintk(100, "udev %p urb %p", udev, urb); + + if (urb->status) { + dev_err(&udev->dev, "URB failed with status %d", urb->status); + return; + } + if (data->fw_urb == NULL) { + dev_err(&udev->dev, "early disconncect\n"); + return; + } +#define CHUNK_SIZE 512 + /* all USB transfers must be done with continuous kernel memory. + can't allocate more than 128k in current linux kernel, so + upload the firmware in chunks + */ + if (data->fw_loaded < data->fw_size) { + len = (data->fw_loaded + CHUNK_SIZE) > data->fw_size ? + data->fw_size % CHUNK_SIZE : CHUNK_SIZE; + + if (len < CHUNK_SIZE) + memset(data->pfw_data, 0, CHUNK_SIZE); + + dprintk(100, "completed len %d, loaded %d \n", len, + data->fw_loaded); + + memcpy(data->pfw_data, + (char *) data->fw->data + data->fw_loaded, len); + + usb_fill_bulk_urb(data->fw_urb, udev, usb_sndbulkpipe(udev, 2), + data->pfw_data, CHUNK_SIZE, + s2255_fwchunk_complete, data); + if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) { + dev_err(&udev->dev, "failed submit URB\n"); + atomic_set(&data->fw_state, S2255_FW_FAILED); + /* wake up anything waiting for the firmware */ + wake_up(&data->wait_fw); + return; + } + data->fw_loaded += len; + } else { + init_timer(&data->dsp_wait); + data->dsp_wait.function = s2255_dsp_running; + data->dsp_wait.data = (unsigned long)data; + atomic_set(&data->fw_state, S2255_FW_LOADED_DSPWAIT); + mod_timer(&data->dsp_wait, msecs_to_jiffies(S2255_DSP_BOOTTIME) + + jiffies); + } + dprintk(100, "2255 complete done\n"); + return; + +} + +static int s2255_got_frame(struct s2255_dev *dev, int chn) +{ + struct s2255_dmaqueue *dma_q = &dev->vidq[chn]; + struct s2255_buffer *buf; + unsigned long flags = 0; + int rc = 0; + dprintk(2, "wakeup: %p channel: %d\n", &dma_q, chn); + spin_lock_irqsave(&dev->slock, flags); + + if (list_empty(&dma_q->active)) { + dprintk(1, "No active queue to serve\n"); + rc = -1; + goto unlock; + } + buf = list_entry(dma_q->active.next, + struct s2255_buffer, vb.queue); + + if (!waitqueue_active(&buf->vb.done)) { + /* no one active */ + rc = -1; + goto unlock; + } + list_del(&buf->vb.queue); + do_gettimeofday(&buf->vb.ts); + dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i); + + s2255_fillbuff(dev, buf, dma_q->channel); + wake_up(&buf->vb.done); + dprintk(2, "wakeup [buf/i] [%p/%d]\n", buf, buf->vb.i); +unlock: + spin_unlock_irqrestore(&dev->slock, flags); + return 0; +} + + +static const struct s2255_fmt *format_by_fourcc(int fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + if (-1 == formats[i].fourcc) + continue; + if (formats[i].fourcc == fourcc) + return formats + i; + } + return NULL; +} + + + + +/* video buffer vmalloc implementation based partly on VIVI driver which is + * Copyright (c) 2006 by + * Mauro Carvalho Chehab + * Ted Walther + * John Sokol + * http://v4l.videotechnology.com/ + * + */ +static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, + int chn) +{ + int pos = 0; + struct timeval ts; + const char *tmpbuf; + char *vbuf = videobuf_to_vmalloc(&buf->vb); + unsigned long last_frame; + struct s2255_framei *frm; + + if (!vbuf) + return; + + last_frame = dev->last_frame[chn]; + if (last_frame != -1) { + frm = &dev->buffer[chn].frame[last_frame]; + tmpbuf = + (const char *)dev->buffer[chn].frame[last_frame].lpvbits; + switch (buf->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + planar422p_to_yuv_packed((const unsigned char *)tmpbuf, + vbuf, buf->vb.width, + buf->vb.height, + buf->fmt->fourcc); + break; + case V4L2_PIX_FMT_GREY: + memcpy(vbuf, tmpbuf, buf->vb.width * buf->vb.height); + break; + case V4L2_PIX_FMT_YUV422P: + memcpy(vbuf, tmpbuf, + buf->vb.width * buf->vb.height * 2); + break; + default: + printk(KERN_DEBUG "s2255: unknown format?\n"); + } + dev->last_frame[chn] = -1; + /* done with the frame, free it */ + frm->ulState = 0; + dprintk(4, "freeing buffer\n"); + } else { + printk(KERN_ERR "s2255: =======no frame\n"); + return; + + } + dprintk(2, "s2255fill at : Buffer 0x%08lx size= %d\n", + (unsigned long)vbuf, pos); + /* tell v4l buffer was filled */ + + buf->vb.field_count++; + do_gettimeofday(&ts); + buf->vb.ts = ts; + buf->vb.state = VIDEOBUF_DONE; +} + + +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ + +static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, + unsigned int *size) +{ + struct s2255_fh *fh = vq->priv_data; + + *size = fh->width * fh->height * (fh->fmt->depth >> 3); + + if (0 == *count) + *count = S2255_DEF_BUFS; + + while (*size * *count > vid_limit * 1024 * 1024) + (*count)--; + + return 0; +} + +static void free_buffer(struct videobuf_queue *vq, struct s2255_buffer *buf) +{ + dprintk(4, "%s\n", __func__); + + videobuf_waiton(&buf->vb, 0, 0); + videobuf_vmalloc_free(&buf->vb); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct s2255_fh *fh = vq->priv_data; + struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); + int rc; + dprintk(4, "%s, field=%d\n", __func__, field); + if (fh->fmt == NULL) + return -EINVAL; + + if ((fh->width < norm_minw(fh->dev->vdev[fh->channel])) || + (fh->width > norm_maxw(fh->dev->vdev[fh->channel])) || + (fh->height < norm_minh(fh->dev->vdev[fh->channel])) || + (fh->height > norm_maxh(fh->dev->vdev[fh->channel]))) { + dprintk(4, "invalid buffer prepare\n"); + return -EINVAL; + } + + buf->vb.size = fh->width * fh->height * (fh->fmt->depth >> 3); + + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) { + dprintk(4, "invalid buffer prepare\n"); + return -EINVAL; + } + + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + rc = videobuf_iolock(vq, &buf->vb, NULL); + if (rc < 0) + goto fail; + } + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; +fail: + free_buffer(vq, buf); + return rc; +} + +static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); + struct s2255_fh *fh = vq->priv_data; + struct s2255_dev *dev = fh->dev; + struct s2255_dmaqueue *vidq = &dev->vidq[fh->channel]; + + dprintk(1, "%s\n", __func__); + + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue, &vidq->active); +} + +static void buffer_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); + struct s2255_fh *fh = vq->priv_data; + dprintk(4, "%s %d\n", __func__, fh->channel); + free_buffer(vq, buf); +} + +static struct videobuf_queue_ops s2255_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + + +static int res_get(struct s2255_dev *dev, struct s2255_fh *fh) +{ + /* is it free? */ + mutex_lock(&dev->lock); + if (dev->resources[fh->channel]) { + /* no, someone else uses it */ + mutex_unlock(&dev->lock); + return 0; + } + /* it's free, grab it */ + dev->resources[fh->channel] = 1; + dprintk(1, "res: get\n"); + mutex_unlock(&dev->lock); + return 1; +} + +static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh) +{ + return (dev->resources[fh->channel]); +} + +static void res_free(struct s2255_dev *dev, struct s2255_fh *fh) +{ + dev->resources[fh->channel] = 0; + dprintk(1, "res: put\n"); +} + + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct s2255_fh *fh = file->private_data; + struct s2255_dev *dev = fh->dev; + strlcpy(cap->driver, "s2255", sizeof(cap->driver)); + strlcpy(cap->card, "s2255", sizeof(cap->card)); + strlcpy(cap->bus_info, dev_name(&dev->udev->dev), sizeof(cap->bus_info)); + cap->version = S2255_VERSION; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + return 0; +} + +static int vidioc_enum_fmt_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + int index = 0; + if (f) + index = f->index; + + if (index >= ARRAY_SIZE(formats)) + return -EINVAL; + + dprintk(4, "name %s\n", formats[index].name); + strlcpy(f->description, formats[index].name, sizeof(f->description)); + f->pixelformat = formats[index].fourcc; + return 0; +} + +static int vidioc_g_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct s2255_fh *fh = priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vb_vidq.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.bytesperline = f->fmt.pix.width * (fh->fmt->depth >> 3); + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + return (0); +} + +static int vidioc_try_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + const struct s2255_fmt *fmt; + enum v4l2_field field; + int b_any_field = 0; + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + int is_ntsc; + + is_ntsc = + (dev->vdev[fh->channel]->current_norm & V4L2_STD_NTSC) ? 1 : 0; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + + if (fmt == NULL) + return -EINVAL; + + field = f->fmt.pix.field; + if (field == V4L2_FIELD_ANY) + b_any_field = 1; + + dprintk(4, "try format %d \n", is_ntsc); + /* supports 3 sizes. see s2255drv.h */ + dprintk(50, "width test %d, height %d\n", + f->fmt.pix.width, f->fmt.pix.height); + if (is_ntsc) { + /* NTSC */ + if (f->fmt.pix.height >= NUM_LINES_1CIFS_NTSC * 2) { + f->fmt.pix.height = NUM_LINES_1CIFS_NTSC * 2; + if (b_any_field) { + field = V4L2_FIELD_SEQ_TB; + } else if (!((field == V4L2_FIELD_INTERLACED) || + (field == V4L2_FIELD_SEQ_TB) || + (field == V4L2_FIELD_INTERLACED_TB))) { + dprintk(1, "unsupported field setting\n"); + return -EINVAL; + } + } else { + f->fmt.pix.height = NUM_LINES_1CIFS_NTSC; + if (b_any_field) { + field = V4L2_FIELD_TOP; + } else if (!((field == V4L2_FIELD_TOP) || + (field == V4L2_FIELD_BOTTOM))) { + dprintk(1, "unsupported field setting\n"); + return -EINVAL; + } + + } + if (f->fmt.pix.width >= LINE_SZ_4CIFS_NTSC) + f->fmt.pix.width = LINE_SZ_4CIFS_NTSC; + else if (f->fmt.pix.width >= LINE_SZ_2CIFS_NTSC) + f->fmt.pix.width = LINE_SZ_2CIFS_NTSC; + else if (f->fmt.pix.width >= LINE_SZ_1CIFS_NTSC) + f->fmt.pix.width = LINE_SZ_1CIFS_NTSC; + else + f->fmt.pix.width = LINE_SZ_1CIFS_NTSC; + } else { + /* PAL */ + if (f->fmt.pix.height >= NUM_LINES_1CIFS_PAL * 2) { + f->fmt.pix.height = NUM_LINES_1CIFS_PAL * 2; + if (b_any_field) { + field = V4L2_FIELD_SEQ_TB; + } else if (!((field == V4L2_FIELD_INTERLACED) || + (field == V4L2_FIELD_SEQ_TB) || + (field == V4L2_FIELD_INTERLACED_TB))) { + dprintk(1, "unsupported field setting\n"); + return -EINVAL; + } + } else { + f->fmt.pix.height = NUM_LINES_1CIFS_PAL; + if (b_any_field) { + field = V4L2_FIELD_TOP; + } else if (!((field == V4L2_FIELD_TOP) || + (field == V4L2_FIELD_BOTTOM))) { + dprintk(1, "unsupported field setting\n"); + return -EINVAL; + } + } + if (f->fmt.pix.width >= LINE_SZ_4CIFS_PAL) { + dprintk(50, "pal 704\n"); + f->fmt.pix.width = LINE_SZ_4CIFS_PAL; + field = V4L2_FIELD_SEQ_TB; + } else if (f->fmt.pix.width >= LINE_SZ_2CIFS_PAL) { + dprintk(50, "pal 352A\n"); + f->fmt.pix.width = LINE_SZ_2CIFS_PAL; + field = V4L2_FIELD_TOP; + } else if (f->fmt.pix.width >= LINE_SZ_1CIFS_PAL) { + dprintk(50, "pal 352B\n"); + f->fmt.pix.width = LINE_SZ_1CIFS_PAL; + field = V4L2_FIELD_TOP; + } else { + dprintk(50, "pal 352C\n"); + f->fmt.pix.width = LINE_SZ_1CIFS_PAL; + field = V4L2_FIELD_TOP; + } + } + + dprintk(50, "width %d height %d field %d \n", f->fmt.pix.width, + f->fmt.pix.height, f->fmt.pix.field); + f->fmt.pix.field = field; + f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + return 0; +} + +static int vidioc_s_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct s2255_fh *fh = priv; + const struct s2255_fmt *fmt; + struct videobuf_queue *q = &fh->vb_vidq; + int ret; + int norm; + + ret = vidioc_try_fmt_cap(file, fh, f); + + if (ret < 0) + return (ret); + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + + if (fmt == NULL) + return -EINVAL; + + mutex_lock(&q->vb_lock); + + if (videobuf_queue_is_busy(&fh->vb_vidq)) { + dprintk(1, "queue busy\n"); + ret = -EBUSY; + goto out_s_fmt; + } + + if (res_locked(fh->dev, fh)) { + dprintk(1, "can't change format after started\n"); + ret = -EBUSY; + goto out_s_fmt; + } + + fh->fmt = fmt; + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->vb_vidq.field = f->fmt.pix.field; + fh->type = f->type; + norm = norm_minw(fh->dev->vdev[fh->channel]); + if (fh->width > norm_minw(fh->dev->vdev[fh->channel])) { + if (fh->height > norm_minh(fh->dev->vdev[fh->channel])) + fh->mode.scale = SCALE_4CIFS; + else + fh->mode.scale = SCALE_2CIFS; + + } else { + fh->mode.scale = SCALE_1CIFS; + } + + /* color mode */ + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_GREY: + fh->mode.color = COLOR_Y8; + break; + case V4L2_PIX_FMT_YUV422P: + fh->mode.color = COLOR_YUVPL; + break; + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + default: + fh->mode.color = COLOR_YUVPK; + break; + } + ret = 0; +out_s_fmt: + mutex_unlock(&q->vb_lock); + return ret; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + int rc; + struct s2255_fh *fh = priv; + rc = videobuf_reqbufs(&fh->vb_vidq, p); + return rc; +} + +static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + int rc; + struct s2255_fh *fh = priv; + rc = videobuf_querybuf(&fh->vb_vidq, p); + return rc; +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + int rc; + struct s2255_fh *fh = priv; + rc = videobuf_qbuf(&fh->vb_vidq, p); + return rc; +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + int rc; + struct s2255_fh *fh = priv; + rc = videobuf_dqbuf(&fh->vb_vidq, p, file->f_flags & O_NONBLOCK); + return rc; +} + +#ifdef CONFIG_VIDEO_V4L1_COMPAT +static int vidioc_cgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) +{ + struct s2255_fh *fh = priv; + + return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8); +} +#endif + +/* write to the configuration pipe, synchronously */ +static int s2255_write_config(struct usb_device *udev, unsigned char *pbuf, + int size) +{ + int pipe; + int done; + long retval = -1; + if (udev) { + pipe = usb_sndbulkpipe(udev, S2255_CONFIG_EP); + retval = usb_bulk_msg(udev, pipe, pbuf, size, &done, 500); + } + return retval; +} + +static u32 get_transfer_size(struct s2255_mode *mode) +{ + int linesPerFrame = LINE_SZ_DEF; + int pixelsPerLine = NUM_LINES_DEF; + u32 outImageSize; + u32 usbInSize; + unsigned int mask_mult; + + if (mode == NULL) + return 0; + + if (mode->format == FORMAT_NTSC) { + switch (mode->scale) { + case SCALE_4CIFS: + linesPerFrame = NUM_LINES_4CIFS_NTSC * 2; + pixelsPerLine = LINE_SZ_4CIFS_NTSC; + break; + case SCALE_2CIFS: + linesPerFrame = NUM_LINES_2CIFS_NTSC; + pixelsPerLine = LINE_SZ_2CIFS_NTSC; + break; + case SCALE_1CIFS: + linesPerFrame = NUM_LINES_1CIFS_NTSC; + pixelsPerLine = LINE_SZ_1CIFS_NTSC; + break; + default: + break; + } + } else if (mode->format == FORMAT_PAL) { + switch (mode->scale) { + case SCALE_4CIFS: + linesPerFrame = NUM_LINES_4CIFS_PAL * 2; + pixelsPerLine = LINE_SZ_4CIFS_PAL; + break; + case SCALE_2CIFS: + linesPerFrame = NUM_LINES_2CIFS_PAL; + pixelsPerLine = LINE_SZ_2CIFS_PAL; + break; + case SCALE_1CIFS: + linesPerFrame = NUM_LINES_1CIFS_PAL; + pixelsPerLine = LINE_SZ_1CIFS_PAL; + break; + default: + break; + } + } + outImageSize = linesPerFrame * pixelsPerLine; + if (mode->color != COLOR_Y8) { + /* 2 bytes/pixel if not monochrome */ + outImageSize *= 2; + } + + /* total bytes to send including prefix and 4K padding; + must be a multiple of USB_READ_SIZE */ + usbInSize = outImageSize + PREFIX_SIZE; /* always send prefix */ + mask_mult = 0xffffffffUL - DEF_USB_BLOCK + 1; + /* if size not a multiple of USB_READ_SIZE */ + if (usbInSize & ~mask_mult) + usbInSize = (usbInSize & mask_mult) + (DEF_USB_BLOCK); + return usbInSize; +} + +static void dump_verify_mode(struct s2255_dev *sdev, struct s2255_mode *mode) +{ + struct device *dev = &sdev->udev->dev; + dev_info(dev, "------------------------------------------------\n"); + dev_info(dev, "verify mode\n"); + dev_info(dev, "format: %d\n", mode->format); + dev_info(dev, "scale: %d\n", mode->scale); + dev_info(dev, "fdec: %d\n", mode->fdec); + dev_info(dev, "color: %d\n", mode->color); + dev_info(dev, "bright: 0x%x\n", mode->bright); + dev_info(dev, "restart: 0x%x\n", mode->restart); + dev_info(dev, "usb_block: 0x%x\n", mode->usb_block); + dev_info(dev, "single: 0x%x\n", mode->single); + dev_info(dev, "------------------------------------------------\n"); +} + +/* + * set mode is the function which controls the DSP. + * the restart parameter in struct s2255_mode should be set whenever + * the image size could change via color format, video system or image + * size. + * When the restart parameter is set, we sleep for ONE frame to allow the + * DSP time to get the new frame + */ +static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, + struct s2255_mode *mode) +{ + int res; + u32 *buffer; + unsigned long chn_rev; + + chn_rev = G_chnmap[chn]; + dprintk(3, "mode scale [%ld] %p %d\n", chn, mode, mode->scale); + dprintk(3, "mode scale [%ld] %p %d\n", chn, &dev->mode[chn], + dev->mode[chn].scale); + dprintk(2, "mode contrast %x\n", mode->contrast); + + /* save the mode */ + dev->mode[chn] = *mode; + dev->req_image_size[chn] = get_transfer_size(mode); + dprintk(1, "transfer size %ld\n", dev->req_image_size[chn]); + + buffer = kzalloc(512, GFP_KERNEL); + if (buffer == NULL) { + dev_err(&dev->udev->dev, "out of mem\n"); + return -ENOMEM; + } + + /* set the mode */ + buffer[0] = IN_DATA_TOKEN; + buffer[1] = (u32) chn_rev; + buffer[2] = CMD_SET_MODE; + memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode)); + res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); + if (debug) + dump_verify_mode(dev, mode); + kfree(buffer); + dprintk(1, "set mode done chn %lu, %d\n", chn, res); + + /* wait at least 3 frames before continuing */ + if (mode->restart) + msleep(125); + + /* clear the restart flag */ + dev->mode[chn].restart = 0; + + return res; +} + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + int res; + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + struct s2255_mode *new_mode; + struct s2255_mode *old_mode; + int chn; + int j; + dprintk(4, "%s\n", __func__); + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dev_err(&dev->udev->dev, "invalid fh type0\n"); + return -EINVAL; + } + if (i != fh->type) { + dev_err(&dev->udev->dev, "invalid fh type1\n"); + return -EINVAL; + } + + if (!res_get(dev, fh)) { + dev_err(&dev->udev->dev, "res get busy\n"); + return -EBUSY; + } + + /* send a set mode command everytime with restart. + in case we switch resolutions or other parameters */ + chn = fh->channel; + new_mode = &fh->mode; + old_mode = &fh->dev->mode[chn]; + + if (new_mode->color != old_mode->color) + new_mode->restart = 1; + else if (new_mode->scale != old_mode->scale) + new_mode->restart = 1; + else if (new_mode->format != old_mode->format) + new_mode->restart = 1; + + s2255_set_mode(dev, chn, new_mode); + new_mode->restart = 0; + *old_mode = *new_mode; + dev->cur_fmt[chn] = fh->fmt; + dprintk(1, "%s[%d]\n", __func__, chn); + dev->last_frame[chn] = -1; + dev->bad_payload[chn] = 0; + dev->cur_frame[chn] = 0; + for (j = 0; j < SYS_FRAMES; j++) { + dev->buffer[chn].frame[j].ulState = 0; + dev->buffer[chn].frame[j].cur_size = 0; + } + res = videobuf_streamon(&fh->vb_vidq); + if (res == 0) { + s2255_start_acquire(dev, chn); + dev->b_acquire[chn] = 1; + } else { + res_free(dev, fh); + } + return res; +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + int res; + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + + dprintk(4, "%s\n, channel: %d", __func__, fh->channel); + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + printk(KERN_ERR "invalid fh type0\n"); + return -EINVAL; + } + if (i != fh->type) { + printk(KERN_ERR "invalid type i\n"); + return -EINVAL; + } + s2255_stop_acquire(dev, fh->channel); + res = videobuf_streamoff(&fh->vb_vidq); + res_free(dev, fh); + return res; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i) +{ + struct s2255_fh *fh = priv; + struct s2255_mode *mode; + struct videobuf_queue *q = &fh->vb_vidq; + int ret = 0; + + mutex_lock(&q->vb_lock); + if (videobuf_queue_is_busy(q)) { + dprintk(1, "queue busy\n"); + ret = -EBUSY; + goto out_s_std; + } + + if (res_locked(fh->dev, fh)) { + dprintk(1, "can't change standard after started\n"); + ret = -EBUSY; + goto out_s_std; + } + mode = &fh->mode; + + if (*i & V4L2_STD_NTSC) { + dprintk(4, "vidioc_s_std NTSC\n"); + mode->format = FORMAT_NTSC; + } else if (*i & V4L2_STD_PAL) { + dprintk(4, "vidioc_s_std PAL\n"); + mode->format = FORMAT_PAL; + } else { + ret = -EINVAL; + } +out_s_std: + mutex_unlock(&q->vb_lock); + return ret; +} + +/* Sensoray 2255 is a multiple channel capture device. + It does not have a "crossbar" of inputs. + We use one V4L device per channel. The user must + be aware that certain combinations are not allowed. + For instance, you cannot do full FPS on more than 2 channels(2 videodevs) + at once in color(you can do full fps on 4 channels with greyscale. +*/ +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + if (inp->index != 0) + return -EINVAL; + + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = S2255_NORMS; + strlcpy(inp->name, "Camera", sizeof(inp->name)); + return (0); +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + if (i > 0) + return -EINVAL; + return 0; +} + +/* --- controls ---------------------------------------------- */ +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) + if (qc->id && qc->id == s2255_qctrl[i].id) { + memcpy(qc, &(s2255_qctrl[i]), sizeof(*qc)); + return (0); + } + + dprintk(4, "query_ctrl -EINVAL %d\n", qc->id); + return -EINVAL; +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) + if (ctrl->id == s2255_qctrl[i].id) { + ctrl->value = qctl_regs[i]; + return (0); + } + dprintk(4, "g_ctrl -EINVAL\n"); + + return -EINVAL; +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + int i; + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + struct s2255_mode *mode; + mode = &fh->mode; + dprintk(4, "vidioc_s_ctrl\n"); + for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) { + if (ctrl->id == s2255_qctrl[i].id) { + if (ctrl->value < s2255_qctrl[i].minimum || + ctrl->value > s2255_qctrl[i].maximum) + return (-ERANGE); + + qctl_regs[i] = ctrl->value; + /* update the mode to the corresponding value */ + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + mode->bright = ctrl->value; + break; + case V4L2_CID_CONTRAST: + mode->contrast = ctrl->value; + break; + case V4L2_CID_HUE: + mode->hue = ctrl->value; + break; + case V4L2_CID_SATURATION: + mode->saturation = ctrl->value; + break; + } + mode->restart = 0; + /* set mode here. Note: stream does not need restarted. + some V4L programs restart stream unnecessarily + after a s_crtl. + */ + s2255_set_mode(dev, fh->channel, mode); + return 0; + } + } + return -EINVAL; +} + +static int s2255_open(struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + struct s2255_dev *h, *dev = NULL; + struct s2255_fh *fh; + struct list_head *list; + enum v4l2_buf_type type = 0; + int i = 0; + int cur_channel = -1; + dprintk(1, "s2255: open called (minor=%d)\n", minor); + + list_for_each(list, &s2255_devlist) { + h = list_entry(list, struct s2255_dev, s2255_devlist); + for (i = 0; i < MAX_CHANNELS; i++) { + if (h->vdev[i]->minor == minor) { + cur_channel = i; + dev = h; + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + } + } + + if ((NULL == dev) || (cur_channel == -1)) { + dprintk(1, "s2255: openv4l no dev\n"); + return -ENODEV; + } + + mutex_lock(&dev->open_lock); + + dev->users[cur_channel]++; + if (dev->users[cur_channel] > S2255_MAX_USERS) { + dev->users[cur_channel]--; + mutex_unlock(&dev->open_lock); + printk(KERN_INFO "s2255drv: too many open handles!\n"); + return -EBUSY; + } + + if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_FAILED) { + err("2255 firmware load failed. retrying.\n"); + s2255_fwload_start(dev); + wait_event_timeout(dev->fw_data->wait_fw, + (atomic_read(&dev->fw_data->fw_state) + != S2255_FW_NOTLOADED), + msecs_to_jiffies(S2255_LOAD_TIMEOUT)); + if (atomic_read(&dev->fw_data->fw_state) + != S2255_FW_SUCCESS) { + printk(KERN_INFO "2255 FW load failed after 2 tries\n"); + mutex_unlock(&dev->open_lock); + return -EFAULT; + } + } else if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_NOTLOADED) { + /* give S2255_LOAD_TIMEOUT time for firmware to load in case + driver loaded and then device immediately opened */ + printk(KERN_INFO "%s waiting for firmware load\n", __func__); + wait_event_timeout(dev->fw_data->wait_fw, + (atomic_read(&dev->fw_data->fw_state) + != S2255_FW_NOTLOADED), + msecs_to_jiffies(S2255_LOAD_TIMEOUT)); + if (atomic_read(&dev->fw_data->fw_state) + != S2255_FW_SUCCESS) { + printk(KERN_INFO "2255 firmware not loaded" + "try again\n"); + mutex_unlock(&dev->open_lock); + return -EBUSY; + } + } + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) { + mutex_unlock(&dev->open_lock); + return -ENOMEM; + } + + file->private_data = fh; + fh->dev = dev; + fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + fh->mode = dev->mode[cur_channel]; + fh->fmt = dev->cur_fmt[cur_channel]; + /* default 4CIF NTSC */ + fh->width = LINE_SZ_4CIFS_NTSC; + fh->height = NUM_LINES_4CIFS_NTSC * 2; + fh->channel = cur_channel; + + /* Put all controls at a sane state */ + for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) + qctl_regs[i] = s2255_qctrl[i].default_value; + + dprintk(1, "s2255drv: open minor=%d type=%s users=%d\n", + minor, v4l2_type_names[type], dev->users[cur_channel]); + dprintk(2, "s2255drv: open: fh=0x%08lx, dev=0x%08lx, vidq=0x%08lx\n", + (unsigned long)fh, (unsigned long)dev, + (unsigned long)&dev->vidq[cur_channel]); + dprintk(4, "s2255drv: open: list_empty active=%d\n", + list_empty(&dev->vidq[cur_channel].active)); + + videobuf_queue_vmalloc_init(&fh->vb_vidq, &s2255_video_qops, + NULL, &dev->slock, + fh->type, + V4L2_FIELD_INTERLACED, + sizeof(struct s2255_buffer), fh); + + kref_get(&dev->kref); + mutex_unlock(&dev->open_lock); + return 0; +} + + +static unsigned int s2255_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct s2255_fh *fh = file->private_data; + int rc; + dprintk(100, "%s\n", __func__); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + return POLLERR; + + rc = videobuf_poll_stream(file, &fh->vb_vidq, wait); + return rc; +} + +static void s2255_destroy(struct kref *kref) +{ + struct s2255_dev *dev = to_s2255_dev(kref); + if (!dev) { + printk(KERN_ERR "s2255drv: kref problem\n"); + return; + } + /* prevent s2255_disconnect from racing s2255_open */ + mutex_lock(&dev->open_lock); + s2255_exit_v4l(dev); + /* device unregistered so no longer possible to open. open_mutex + can be unlocked */ + mutex_unlock(&dev->open_lock); + + /* board shutdown stops the read pipe if it is running */ + s2255_board_shutdown(dev); + + /* make sure firmware still not trying to load */ + if (dev->fw_data->fw_urb) { + dprintk(2, "kill fw_urb\n"); + usb_kill_urb(dev->fw_data->fw_urb); + usb_free_urb(dev->fw_data->fw_urb); + dev->fw_data->fw_urb = NULL; + } + + /* make sure we aren't waiting for the DSP */ + if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_LOADED_DSPWAIT) { + /* if we are, wait for the wakeup for fw_success or timeout */ + wait_event_timeout(dev->fw_data->wait_fw, + (atomic_read(&dev->fw_data->fw_state) + == S2255_FW_SUCCESS), + msecs_to_jiffies(S2255_LOAD_TIMEOUT)); + } + + if (dev->fw_data) { + kfree(dev->fw_data->pfw_data); + kfree(dev->fw_data); + } + + if (dev->fw_data->fw) { + release_firmware(dev->fw_data->fw); + dev->fw_data->fw = NULL; + } + + usb_put_dev(dev->udev); + dprintk(1, "%s", __func__); + kfree(dev); +} + +static int s2255_close(struct inode *inode, struct file *file) +{ + struct s2255_fh *fh = file->private_data; + struct s2255_dev *dev = fh->dev; + int minor = iminor(inode); + if (!dev) + return -ENODEV; + + mutex_lock(&dev->open_lock); + + if (dev->b_acquire[fh->channel]) + s2255_stop_acquire(dev, fh->channel); + res_free(dev, fh); + videobuf_mmap_free(&fh->vb_vidq); + kfree(fh); + dev->users[fh->channel]--; + mutex_unlock(&dev->open_lock); + + kref_put(&dev->kref, s2255_destroy); + dprintk(1, "s2255: close called (minor=%d, users=%d)\n", + minor, dev->users[fh->channel]); + return 0; +} + +static int s2255_mmap_v4l(struct file *file, struct vm_area_struct *vma) +{ + struct s2255_fh *fh = file->private_data; + int ret; + + if (!fh) + return -ENODEV; + dprintk(4, "mmap called, vma=0x%08lx\n", (unsigned long)vma); + + ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); + + dprintk(4, "vma start=0x%08lx, size=%ld, ret=%d\n", + (unsigned long)vma->vm_start, + (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, ret); + + return ret; +} + +static const struct file_operations s2255_fops_v4l = { + .owner = THIS_MODULE, + .open = s2255_open, + .release = s2255_close, + .poll = s2255_poll, + .ioctl = video_ioctl2, /* V4L2 ioctl handler */ + .compat_ioctl = v4l_compat_ioctl32, + .mmap = s2255_mmap_v4l, + .llseek = no_llseek, +}; + +static struct video_device template = { + .name = "s2255v", + .type = VID_TYPE_CAPTURE, + .fops = &s2255_fops_v4l, + .minor = -1, + .release = video_device_release, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap, + .vidioc_g_fmt_cap = vidioc_g_fmt_cap, + .vidioc_try_fmt_cap = vidioc_try_fmt_cap, + .vidioc_s_fmt_cap = vidioc_s_fmt_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = vidioc_cgmbuf, +#endif + .tvnorms = S2255_NORMS, + .current_norm = V4L2_STD_NTSC_M, +}; + +static int s2255_probe_v4l(struct s2255_dev *dev) +{ + int ret; + int i; + int cur_nr = video_nr; + + /* initialize all video 4 linux */ + list_add_tail(&dev->s2255_devlist, &s2255_devlist); + /* register 4 video devices */ + for (i = 0; i < MAX_CHANNELS; i++) { + INIT_LIST_HEAD(&dev->vidq[i].active); + dev->vidq[i].dev = dev; + dev->vidq[i].channel = i; + dev->vidq[i].kthread = NULL; + /* register 4 video devices */ + dev->vdev[i] = video_device_alloc(); + memcpy(dev->vdev[i], &template, sizeof(struct video_device)); + dev->vdev[i]->dev = &dev->interface->dev; + if (video_nr == -1) + ret = video_register_device(dev->vdev[i], + VFL_TYPE_GRABBER, + video_nr); + else + ret = video_register_device(dev->vdev[i], + VFL_TYPE_GRABBER, + cur_nr + i); + dev->vdev[i]->priv = dev; + + if (ret != 0) { + dev_err(&dev->udev->dev, + "failed to register video device!\n"); + return ret; + } + } + printk(KERN_INFO "Sensoray 2255 V4L driver\n"); + return ret; +} + +static void s2255_exit_v4l(struct s2255_dev *dev) +{ + struct list_head *list; + int i; + /* unregister the video devices */ + while (!list_empty(&s2255_devlist)) { + list = s2255_devlist.next; + list_del(list); + } + for (i = 0; i < MAX_CHANNELS; i++) { + if (-1 != dev->vdev[i]->minor) + video_unregister_device(dev->vdev[i]); + else + video_device_release(dev->vdev[i]); + } +} + +/* this function moves the usb stream read pipe data + * into the system buffers. + * returns 0 on success, EAGAIN if more data to process( call this + * function again). + * + * Received frame structure: + * bytes 0-3: marker : 0x2255DA4AL (FRAME_MARKER) + * bytes 4-7: channel: 0-3 + * bytes 8-11: payload size: size of the frame + * bytes 12-payloadsize+12: frame data + */ +static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) +{ + static int dbgsync; /* = 0; */ + char *pdest; + u32 offset = 0; + int bsync = 0; + int btrunc = 0; + char *psrc; + unsigned long copy_size; + unsigned long size; + s32 idx = -1; + struct s2255_framei *frm; + unsigned char *pdata; + unsigned long cur_size; + int bsearch = 0; + struct s2255_bufferi *buf; + dprintk(100, "buffer to user\n"); + + idx = dev->cur_frame[dev->cc]; + buf = &dev->buffer[dev->cc]; + frm = &buf->frame[idx]; + + if (frm->ulState == 0) { + frm->ulState = 1; + frm->cur_size = 0; + bsearch = 1; + } else if (frm->ulState == 2) { + /* system frame was not freed */ + dprintk(2, "sys frame not free. overrun ringbuf\n"); + bsearch = 1; + frm->ulState = 1; + frm->cur_size = 0; + } + + if (bsearch) { + if (*(s32 *) pipe_info->transfer_buffer != FRAME_MARKER) { + u32 jj; + if (dbgsync == 0) { + dprintk(3, "not synched, discarding all packets" + "until marker\n"); + + dbgsync++; + } + pdata = (unsigned char *)pipe_info->transfer_buffer; + for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); + jj++) { + if (*(s32 *) pdata == FRAME_MARKER) { + int cc; + dprintk(3, + "found frame marker at offset:" + " %d [%x %x]\n", jj, pdata[0], + pdata[1]); + offset = jj; + bsync = 1; + cc = *(u32 *) (pdata + sizeof(u32)); + if (cc >= MAX_CHANNELS) { + printk(KERN_ERR + "bad channel\n"); + return -EINVAL; + } + /* reverse it */ + dev->cc = G_chnmap[cc]; + break; + } + pdata++; + } + if (bsync == 0) + return -EINVAL; + } else { + u32 *pword; + u32 payload; + int cc; + dbgsync = 0; + bsync = 1; + pword = (u32 *) pipe_info->transfer_buffer; + cc = pword[1]; + + if (cc >= MAX_CHANNELS) { + printk("invalid channel found. " + "throwing out data!\n"); + return -EINVAL; + } + dev->cc = G_chnmap[cc]; + payload = pword[2]; + if (payload != dev->req_image_size[dev->cc]) { + dprintk(1, "[%d][%d]unexpected payload: %d" + "required: %lu \n", cc, dev->cc, + payload, dev->req_image_size[dev->cc]); + dev->bad_payload[dev->cc]++; + /* discard the bad frame */ + return -EINVAL; + } + + } + } + /* search done. now find out if should be acquiring + on this channel */ + if (!dev->b_acquire[dev->cc]) { + frm->ulState = 0; + return -EINVAL; + } + + idx = dev->cur_frame[dev->cc]; + frm = &dev->buffer[dev->cc].frame[idx]; + + if (frm->ulState == 0) { + frm->ulState = 1; + frm->cur_size = 0; + } else if (frm->ulState == 2) { + /* system frame ring buffer overrun */ + dprintk(2, "sys frame overrun. overwriting frame %d %d\n", + dev->cc, idx); + frm->ulState = 1; + frm->cur_size = 0; + } + + if (bsync) { + /* skip the marker 512 bytes (and offset if out of sync) */ + psrc = (u8 *)pipe_info->transfer_buffer + offset + PREFIX_SIZE; + } else { + psrc = (u8 *)pipe_info->transfer_buffer; + } + + if (frm->lpvbits == NULL) { + dprintk(1, "s2255 frame buffer == NULL.%p %p %d %d", + frm, dev, dev->cc, idx); + return -ENOMEM; + } + + pdest = frm->lpvbits + frm->cur_size; + + if (bsync) { + copy_size = + (pipe_info->cur_transfer_size - offset) - PREFIX_SIZE; + if (copy_size > pipe_info->cur_transfer_size) { + printk("invalid copy size, overflow!\n"); + return -ENOMEM; + } + } else { + copy_size = pipe_info->cur_transfer_size; + } + + cur_size = frm->cur_size; + size = dev->req_image_size[dev->cc]; + + if ((copy_size + cur_size) > size) { + copy_size = size - cur_size; + btrunc = 1; + } + + memcpy(pdest, psrc, copy_size); + cur_size += copy_size; + frm->cur_size += copy_size; + dprintk(50, "cur_size size %lu size %lu \n", cur_size, size); + + if (cur_size >= (size - PREFIX_SIZE)) { + u32 cc = dev->cc; + frm->ulState = 2; + dprintk(2, "****************[%d]Buffer[%d]full*************\n", + cc, idx); + dev->last_frame[cc] = dev->cur_frame[cc]; + dev->cur_frame[cc]++; + /* end of system frame ring buffer, start at zero */ + if ((dev->cur_frame[cc] == SYS_FRAMES) || + (dev->cur_frame[cc] == dev->buffer[cc].dwFrames)) + dev->cur_frame[cc] = 0; + + /* signal the semaphore for this channel */ + if (dev->b_acquire[cc]) + s2255_got_frame(dev, cc); + dev->frame_count[cc]++; + } + /* frame was truncated */ + if (btrunc) { + /* return more data to process */ + return EAGAIN; + } + /* done successfully */ + return 0; +} + +static void s2255_read_video_callback(struct s2255_dev *dev, + struct s2255_pipeinfo *pipe_info) +{ + int res; + dprintk(50, "callback read video \n"); + + if (dev->cc >= MAX_CHANNELS) { + dev->cc = 0; + dev_err(&dev->udev->dev, "invalid channel\n"); + return; + } + /* otherwise copy to the system buffers */ + res = save_frame(dev, pipe_info); + if (res == EAGAIN) + save_frame(dev, pipe_info); + + dprintk(50, "callback read video done\n"); + return; +} + +static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request, + u16 Index, u16 Value, void *TransferBuffer, + s32 TransferBufferLength, int bOut) +{ + int r; + if (!bOut) { + r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), + Request, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_IN, + Value, Index, TransferBuffer, + TransferBufferLength, HZ * 5); + } else { + r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), + Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE, + Value, Index, TransferBuffer, + TransferBufferLength, HZ * 5); + } + return r; +} + +/* + * retrieve FX2 firmware version. future use. + * @param dev pointer to device extension + * @return -1 for fail, else returns firmware version as an int(16 bits) + */ +static int s2255_get_fx2fw(struct s2255_dev *dev) +{ + int fw; + int ret; + unsigned char transBuffer[64]; + ret = s2255_vendor_req(dev, S2255_VR_FW, 0, 0, transBuffer, 2, + S2255_VR_IN); + if (ret < 0) + dprintk(2, "get fw error: %x\n", ret); + fw = transBuffer[0] + (transBuffer[1] << 8); + dprintk(2, "Get FW %x %x\n", transBuffer[0], transBuffer[1]); + return fw; +} + +/* + * Create the system ring buffer to copy frames into from the + * usb read pipe. + */ +static int s2255_create_sys_buffers(struct s2255_dev *dev, unsigned long chn) +{ + unsigned long i; + unsigned long reqsize; + dprintk(1, "create sys buffers\n"); + if (chn >= MAX_CHANNELS) + return -1; + + dev->buffer[chn].dwFrames = SYS_FRAMES; + + /* always allocate maximum size(PAL) for system buffers */ + reqsize = SYS_FRAMES_MAXSIZE; + + if (reqsize > SYS_FRAMES_MAXSIZE) + reqsize = SYS_FRAMES_MAXSIZE; + + for (i = 0; i < SYS_FRAMES; i++) { + /* allocate the frames */ + dev->buffer[chn].frame[i].lpvbits = vmalloc(reqsize); + + dprintk(1, "valloc %p chan %lu, idx %lu, pdata %p\n", + &dev->buffer[chn].frame[i], chn, i, + dev->buffer[chn].frame[i].lpvbits); + dev->buffer[chn].frame[i].size = reqsize; + if (dev->buffer[chn].frame[i].lpvbits == NULL) { + printk(KERN_INFO "out of memory. using less frames\n"); + dev->buffer[chn].dwFrames = i; + break; + } + } + + /* make sure internal states are set */ + for (i = 0; i < SYS_FRAMES; i++) { + dev->buffer[chn].frame[i].ulState = 0; + dev->buffer[chn].frame[i].cur_size = 0; + } + + dev->cur_frame[chn] = 0; + dev->last_frame[chn] = -1; + return 0; +} + +static int s2255_release_sys_buffers(struct s2255_dev *dev, + unsigned long channel) +{ + unsigned long i; + dprintk(1, "release sys buffers\n"); + for (i = 0; i < SYS_FRAMES; i++) { + if (dev->buffer[channel].frame[i].lpvbits) { + dprintk(1, "vfree %p\n", + dev->buffer[channel].frame[i].lpvbits); + vfree(dev->buffer[channel].frame[i].lpvbits); + } + dev->buffer[channel].frame[i].lpvbits = NULL; + } + return 0; +} + +static int s2255_board_init(struct s2255_dev *dev) +{ + int j; + struct s2255_mode mode_def = DEF_MODEI_NTSC_CONT; + int fw_ver; + dprintk(4, "board init: %p", dev); + + for (j = 0; j < MAX_PIPE_BUFFERS; j++) { + struct s2255_pipeinfo *pipe = &dev->pipes[j]; + + memset(pipe, 0, sizeof(*pipe)); + pipe->dev = dev; + pipe->cur_transfer_size = DEFAULT_PIPE_USBBLOCK; + pipe->max_transfer_size = MAX_PIPE_USBBLOCK; + + if (pipe->cur_transfer_size > pipe->max_transfer_size) + pipe->cur_transfer_size = pipe->max_transfer_size; + pipe->transfer_buffer = kzalloc(pipe->max_transfer_size, + GFP_KERNEL); + if (pipe->transfer_buffer == NULL) { + dprintk(1, "out of memory!\n"); + return -ENOMEM; + } + + } + + /* query the firmware */ + fw_ver = s2255_get_fx2fw(dev); + + printk(KERN_INFO "2255 usb firmware version %d \n", fw_ver); + if (fw_ver < CUR_USB_FWVER) + err("usb firmware not up to date %d\n", fw_ver); + + for (j = 0; j < MAX_CHANNELS; j++) { + dev->b_acquire[j] = 0; + dev->mode[j] = mode_def; + dev->cur_fmt[j] = &formats[0]; + dev->mode[j].restart = 1; + dev->req_image_size[j] = get_transfer_size(&mode_def); + dev->frame_count[j] = 0; + /* create the system buffers */ + s2255_create_sys_buffers(dev, j); + } + /* start read pipe */ + s2255_start_readpipe(dev); + + dprintk(1, "S2255: board initialized\n"); + return 0; +} + +static int s2255_board_shutdown(struct s2255_dev *dev) +{ + u32 i; + + dprintk(1, "S2255: board shutdown: %p", dev); + + for (i = 0; i < MAX_CHANNELS; i++) { + if (dev->b_acquire[i]) + s2255_stop_acquire(dev, i); + } + + s2255_stop_readpipe(dev); + + for (i = 0; i < MAX_CHANNELS; i++) + s2255_release_sys_buffers(dev, i); + + /* release transfer buffers */ + for (i = 0; i < MAX_PIPE_BUFFERS; i++) { + struct s2255_pipeinfo *pipe = &dev->pipes[i]; + kfree(pipe->transfer_buffer); + } + return 0; +} + +static void read_pipe_completion(struct urb *purb) +{ + struct s2255_pipeinfo *pipe_info; + struct s2255_dev *dev; + int status; + int pipe; + + pipe_info = purb->context; + dprintk(100, "read pipe completion %p, status %d\n", purb, + purb->status); + if (pipe_info == NULL) { + err("no context !"); + return; + } + + dev = pipe_info->dev; + if (dev == NULL) { + err("no context !"); + return; + } + status = purb->status; + if (status != 0) { + dprintk(2, "read_pipe_completion: err\n"); + return; + } + + if (pipe_info->state == 0) { + dprintk(2, "exiting USB pipe"); + return; + } + + s2255_read_video_callback(dev, pipe_info); + + pipe_info->err_count = 0; + pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint); + /* reuse urb */ + usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev, + pipe, + pipe_info->transfer_buffer, + pipe_info->cur_transfer_size, + read_pipe_completion, pipe_info); + + if (pipe_info->state != 0) { + if (usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL)) { + dev_err(&dev->udev->dev, "error submitting urb\n"); + usb_free_urb(pipe_info->stream_urb); + } + } else { + dprintk(2, "read pipe complete state 0\n"); + } + return; +} + +static int s2255_start_readpipe(struct s2255_dev *dev) +{ + int pipe; + int retval; + int i; + struct s2255_pipeinfo *pipe_info = dev->pipes; + pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint); + dprintk(2, "start pipe IN %d\n", dev->read_endpoint); + + for (i = 0; i < MAX_PIPE_BUFFERS; i++) { + pipe_info->state = 1; + pipe_info->buf_index = (u32) i; + pipe_info->priority_set = 0; + pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!pipe_info->stream_urb) { + dev_err(&dev->udev->dev, + "ReadStream: Unable to alloc URB"); + return -ENOMEM; + } + /* transfer buffer allocated in board_init */ + usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev, + pipe, + pipe_info->transfer_buffer, + pipe_info->cur_transfer_size, + read_pipe_completion, pipe_info); + + pipe_info->urb_size = sizeof(pipe_info->stream_urb); + dprintk(4, "submitting URB %p\n", pipe_info->stream_urb); + retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL); + if (retval) { + printk(KERN_ERR "s2255: start read pipe failed\n"); + return retval; + } + } + + return 0; +} + +/* starts acquisition process */ +static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn) +{ + unsigned char *buffer; + int res; + unsigned long chn_rev; + int j; + if (chn >= MAX_CHANNELS) { + dprintk(2, "start acquire failed, bad channel %lu\n", chn); + return -1; + } + + chn_rev = G_chnmap[chn]; + dprintk(1, "S2255: start acquire %lu \n", chn); + + buffer = kzalloc(512, GFP_KERNEL); + if (buffer == NULL) { + dev_err(&dev->udev->dev, "out of mem\n"); + return -ENOMEM; + } + + dev->last_frame[chn] = -1; + dev->bad_payload[chn] = 0; + dev->cur_frame[chn] = 0; + for (j = 0; j < SYS_FRAMES; j++) { + dev->buffer[chn].frame[j].ulState = 0; + dev->buffer[chn].frame[j].cur_size = 0; + } + + /* send the start command */ + *(u32 *) buffer = IN_DATA_TOKEN; + *((u32 *) buffer + 1) = (u32) chn_rev; + *((u32 *) buffer + 2) = (u32) CMD_START; + res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); + if (res != 0) + dev_err(&dev->udev->dev, "CMD_START error\n"); + + dprintk(2, "start acquire exit[%lu] %d \n", chn, res); + kfree(buffer); + return 0; +} + +static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn) +{ + unsigned char *buffer; + int res; + unsigned long chn_rev; + + if (chn >= MAX_CHANNELS) { + dprintk(2, "stop acquire failed, bad channel %lu\n", chn); + return -1; + } + chn_rev = G_chnmap[chn]; + + buffer = kzalloc(512, GFP_KERNEL); + if (buffer == NULL) { + dev_err(&dev->udev->dev, "out of mem\n"); + return -ENOMEM; + } + + /* send the stop command */ + dprintk(4, "stop acquire %lu\n", chn); + *(u32 *) buffer = IN_DATA_TOKEN; + *((u32 *) buffer + 1) = (u32) chn_rev; + *((u32 *) buffer + 2) = CMD_STOP; + res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); + + if (res != 0) + dev_err(&dev->udev->dev, "CMD_STOP error\n"); + + dprintk(4, "stop acquire: releasing states \n"); + + kfree(buffer); + dev->b_acquire[chn] = 0; + + return 0; +} + +static void s2255_stop_readpipe(struct s2255_dev *dev) +{ + int j; + + if (dev == NULL) { + err("s2255: invalid device"); + return; + } + dprintk(4, "stop read pipe\n"); + for (j = 0; j < MAX_PIPE_BUFFERS; j++) { + struct s2255_pipeinfo *pipe_info = &dev->pipes[j]; + if (pipe_info) { + if (pipe_info->state == 0) + continue; + pipe_info->state = 0; + pipe_info->prev_state = 1; + + } + } + + for (j = 0; j < MAX_PIPE_BUFFERS; j++) { + struct s2255_pipeinfo *pipe_info = &dev->pipes[j]; + if (pipe_info->stream_urb) { + /* cancel urb */ + usb_kill_urb(pipe_info->stream_urb); + usb_free_urb(pipe_info->stream_urb); + pipe_info->stream_urb = NULL; + } + } + dprintk(2, "s2255 stop read pipe: %d\n", j); + return; +} + +static void s2255_fwload_start(struct s2255_dev *dev) +{ + dev->fw_data->fw_size = dev->fw_data->fw->size; + atomic_set(&dev->fw_data->fw_state, S2255_FW_NOTLOADED); + memcpy(dev->fw_data->pfw_data, + dev->fw_data->fw->data, CHUNK_SIZE); + dev->fw_data->fw_loaded = CHUNK_SIZE; + usb_fill_bulk_urb(dev->fw_data->fw_urb, dev->udev, + usb_sndbulkpipe(dev->udev, 2), + dev->fw_data->pfw_data, + CHUNK_SIZE, s2255_fwchunk_complete, + dev->fw_data); + mod_timer(&dev->timer, jiffies + HZ); +} + +/* standard usb probe function */ +static int s2255_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct s2255_dev *dev = NULL; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int i; + int retval = -ENOMEM; + + dprintk(2, "s2255: probe\n"); + + /* allocate memory for our device state and initialize it to zero */ + dev = kzalloc(sizeof(struct s2255_dev), GFP_KERNEL); + if (dev == NULL) { + err("s2255: out of memory"); + goto error; + } + + dev->fw_data = kzalloc(sizeof(struct s2255_fw), GFP_KERNEL); + if (!dev->fw_data) + goto error; + + mutex_init(&dev->lock); + mutex_init(&dev->open_lock); + + /* grab usb_device and save it */ + dev->udev = usb_get_dev(interface_to_usbdev(interface)); + if (dev->udev == NULL) { + dev_err(&interface->dev, "null usb device\n"); + retval = -ENODEV; + goto error; + } + kref_init(&dev->kref); + dprintk(1, "dev: %p, kref: %p udev %p interface %p\n", dev, &dev->kref, + dev->udev, interface); + dev->interface = interface; + /* set up the endpoint information */ + iface_desc = interface->cur_altsetting; + dprintk(1, "num endpoints %d\n", iface_desc->desc.bNumEndpoints); + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + if (!dev->read_endpoint && usb_endpoint_is_bulk_in(endpoint)) { + /* we found the bulk in endpoint */ + dev->read_endpoint = endpoint->bEndpointAddress; + } + } + + if (!dev->read_endpoint) { + dev_err(&interface->dev, "Could not find bulk-in endpoint"); + goto error; + } + + /* set intfdata */ + usb_set_intfdata(interface, dev); + + dprintk(100, "after intfdata %p\n", dev); + + init_timer(&dev->timer); + dev->timer.function = s2255_timer; + dev->timer.data = (unsigned long)dev->fw_data; + + init_waitqueue_head(&dev->fw_data->wait_fw); + + + dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL); + + if (!dev->fw_data->fw_urb) { + dev_err(&interface->dev, "out of memory!\n"); + goto error; + } + dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL); + if (!dev->fw_data->pfw_data) { + dev_err(&interface->dev, "out of memory!\n"); + goto error; + } + /* load the first chunk */ + if (request_firmware(&dev->fw_data->fw, + FIRMWARE_FILE_NAME, &dev->udev->dev)) { + printk(KERN_ERR "sensoray 2255 failed to get firmware\n"); + goto error; + } + + /* loads v4l specific */ + s2255_probe_v4l(dev); + /* load 2255 board specific */ + s2255_board_init(dev); + + dprintk(4, "before probe done %p\n", dev); + spin_lock_init(&dev->slock); + + s2255_fwload_start(dev); + dev_info(&interface->dev, "Sensoray 2255 detected\n"); + return 0; +error: + return retval; +} + +/* disconnect routine. when board is removed physically or with rmmod */ +static void s2255_disconnect(struct usb_interface *interface) +{ + struct s2255_dev *dev = NULL; + dprintk(1, "s2255: disconnect interface %p\n", interface); + dev = usb_get_intfdata(interface); + if (dev) { + kref_put(&dev->kref, s2255_destroy); + dprintk(1, "s2255drv: disconnect\n"); + dev_info(&interface->dev, "s2255usb now disconnected\n"); + } + usb_set_intfdata(interface, NULL); +} + +static struct usb_driver s2255_driver = { + .name = "s2255", + .probe = s2255_probe, + .disconnect = s2255_disconnect, + .id_table = s2255_table, +}; + +static int __init usb_s2255_init(void) +{ + int result; + + /* register this driver with the USB subsystem */ + result = usb_register(&s2255_driver); + + if (result) + err("usb_register failed. Error number %d", result); + + dprintk(2, "s2255_init: done\n"); + return result; +} + +static void __exit usb_s2255_exit(void) +{ + usb_deregister(&s2255_driver); +} + +module_init(usb_s2255_init); +module_exit(usb_s2255_exit); + +MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver"); +MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)"); +MODULE_LICENSE("GPL"); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/