Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761189AbYF0OxH (ORCPT ); Fri, 27 Jun 2008 10:53:07 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757042AbYF0Owh (ORCPT ); Fri, 27 Jun 2008 10:52:37 -0400 Received: from g4t0015.houston.hp.com ([15.201.24.18]:28766 "EHLO g4t0015.houston.hp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755256AbYF0Owe (ORCPT ); Fri, 27 Jun 2008 10:52:34 -0400 Message-Id: <20080627144753.610931382@ldl.fc.hp.com> References: <20080627144538.743154341@ldl.fc.hp.com> User-Agent: quilt/0.46-1 Date: Fri, 27 Jun 2008 08:45:42 -0600 From: Bjorn Helgaas To: Len Brown To: Andi Kleen To: Jesse Barnes To: Thomas Gleixner To: Ingo Molnar To: "H. Peter Anvin" Cc: linux-acpi@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Andrew Morton Subject: [patch 4/6] PCIE: aer: use dev_printk when possible Content-Disposition: inline; filename=pci-aer-dev_printk X-Brightmail-Tracker: AAAAAQAAAAI= X-Whitelist: TRUE Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5055 Lines: 133 Convert printks to use dev_printk(). Signed-off-by: Bjorn Helgaas --- drivers/pci/pcie/aer/aerdrv.c | 8 +++----- drivers/pci/pcie/aer/aerdrv_acpi.c | 8 ++++---- drivers/pci/pcie/aer/aerdrv_core.c | 24 ++++++++++++------------ 3 files changed, 19 insertions(+), 21 deletions(-) Index: work11/drivers/pci/pcie/aer/aerdrv.c =================================================================== --- work11.orig/drivers/pci/pcie/aer/aerdrv.c 2008-06-26 12:27:39.000000000 -0600 +++ work11/drivers/pci/pcie/aer/aerdrv.c 2008-06-26 12:30:14.000000000 -0600 @@ -219,8 +219,7 @@ static int __devinit aer_probe (struct p /* Alloc rpc data structure */ if (!(rpc = aer_alloc_rpc(dev))) { - printk(KERN_DEBUG "%s: Alloc rpc fails on PCIE device[%s]\n", - __func__, device->bus_id); + dev_printk(KERN_DEBUG, device, "alloc rpc failed\n"); aer_remove(dev); return -ENOMEM; } @@ -228,8 +227,7 @@ static int __devinit aer_probe (struct p /* Request IRQ ISR */ if ((status = request_irq(dev->irq, aer_irq, IRQF_SHARED, "aerdrv", dev))) { - printk(KERN_DEBUG "%s: Request ISR fails on PCIE device[%s]\n", - __func__, device->bus_id); + dev_printk(KERN_DEBUG, device, "request IRQ failed\n"); aer_remove(dev); return status; } @@ -273,7 +271,7 @@ static pci_ers_result_t aer_root_reset(s * to issue Configuration Requests to those devices. */ msleep(200); - printk(KERN_DEBUG "Complete link reset at Root[%s]\n", dev->dev.bus_id); + dev_printk(KERN_DEBUG, &dev->dev, "Root Port link has been reset\n"); /* Enable Root Port's interrupt in response to error messages */ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status); Index: work11/drivers/pci/pcie/aer/aerdrv_acpi.c =================================================================== --- work11.orig/drivers/pci/pcie/aer/aerdrv_acpi.c 2008-06-26 12:27:39.000000000 -0600 +++ work11/drivers/pci/pcie/aer/aerdrv_acpi.c 2008-06-26 12:30:14.000000000 -0600 @@ -50,10 +50,10 @@ int aer_osc_setup(struct pcie_device *pc } if (ACPI_FAILURE(status)) { - printk(KERN_DEBUG "AER service couldn't init device %s - %s\n", - pciedev->device.bus_id, - (status == AE_SUPPORT || status == AE_NOT_FOUND) ? - "no _OSC support" : "Run ACPI _OSC fails"); + dev_printk(KERN_DEBUG, &pciedev->device, "AER service couldn't " + "init device: %s\n", + (status == AE_SUPPORT || status == AE_NOT_FOUND) ? + "no _OSC support" : "_OSC failed"); return -1; } Index: work11/drivers/pci/pcie/aer/aerdrv_core.c =================================================================== --- work11.orig/drivers/pci/pcie/aer/aerdrv_core.c 2008-06-26 12:27:39.000000000 -0600 +++ work11/drivers/pci/pcie/aer/aerdrv_core.c 2008-06-26 12:30:14.000000000 -0600 @@ -221,9 +221,9 @@ static void report_error_detected(struct * of a driver for this device is unaware of * its hw state. */ - printk(KERN_DEBUG "Device ID[%s] has %s\n", - dev->dev.bus_id, (dev->driver) ? - "no AER-aware driver" : "no driver"); + dev_printk(KERN_DEBUG, &dev->dev, "device has %s\n", + dev->driver ? + "no AER-aware driver" : "no driver"); } return; } @@ -304,7 +304,7 @@ static pci_ers_result_t broadcast_error_ { struct aer_broadcast_data result_data; - printk(KERN_DEBUG "Broadcast %s message\n", error_mesg); + dev_printk(KERN_DEBUG, &dev->dev, "broadcast %s message\n", error_mesg); result_data.state = state; if (cb == report_error_detected) result_data.result = PCI_ERS_RESULT_CAN_RECOVER; @@ -404,18 +404,16 @@ static pci_ers_result_t reset_link(struc data.aer_driver = to_service_driver(aerdev->device.driver); } else { - printk(KERN_DEBUG "No link-reset support to Device ID" - "[%s]\n", - dev->dev.bus_id); + dev_printk(KERN_DEBUG, &dev->dev, "no link-reset " + "support\n"); return PCI_ERS_RESULT_DISCONNECT; } } status = data.aer_driver->reset_link(udev); if (status != PCI_ERS_RESULT_RECOVERED) { - printk(KERN_DEBUG "Link reset at upstream Device ID" - "[%s] failed\n", - udev->dev.bus_id); + dev_printk(KERN_DEBUG, &dev->dev, "link reset at upstream " + "device %s failed\n", pci_name(udev)); return PCI_ERS_RESULT_DISCONNECT; } @@ -511,10 +509,12 @@ static void handle_error_source(struct p } else { status = do_recovery(aerdev, dev, info.severity); if (status == PCI_ERS_RESULT_RECOVERED) { - printk(KERN_DEBUG "AER driver successfully recovered\n"); + dev_printk(KERN_DEBUG, &dev->dev, "AER driver " + "successfully recovered\n"); } else { /* TODO: Should kernel panic here? */ - printk(KERN_DEBUG "AER driver didn't recover\n"); + dev_printk(KERN_DEBUG, &dev->dev, "AER driver didn't " + "recover\n"); } } } -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/