Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753546AbYF2VdG (ORCPT ); Sun, 29 Jun 2008 17:33:06 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751407AbYF2Vcy (ORCPT ); Sun, 29 Jun 2008 17:32:54 -0400 Received: from wf-out-1314.google.com ([209.85.200.170]:1511 "EHLO wf-out-1314.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751237AbYF2Vcr (ORCPT ); Sun, 29 Jun 2008 17:32:47 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:mime-version:content-type :content-transfer-encoding:content-disposition; b=InAzKVzSVRASDMic6XkfXdBFJ3mpO6V/bBHpPkf7Wl1RHA/EonM+4q74tPwVmlOeOo gmekmh+eeGSehOAApsCrqtRtsEM3JfFITO+8gBhP8j65XacrlfoXk0RgNZVy1DOfPJeA PUxI2iXpx/S4wMEU2xLxwhQyf0lwgewz5ctXU= Message-ID: <7618ba960806291432l20b7b6b5lea4b60bafa68c3bf@mail.gmail.com> Date: Sun, 29 Jun 2008 16:32:45 -0500 From: "Noah Watkins" To: LKML Subject: [BUG RT] 2.6.25.8-rt7 on 8-way Cc: "Steven Rostedt" , RT , "Ingo Molnar" , "Thomas Gleixner" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 67872 Lines: 1461 My kernel is very, very noisy with the following bug: - Full dmesg below - Please CC me BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 Initializing cgroup subsys cpuset Linux version 2.6.25.8-rt7 (nwatkins@kuspsmp.ittc.ku.edu) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP PREEMPT RT Sun Jun 29 15:42:24 CDT 2008 Command line: ro root=LABEL=/ rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffa0000 (usable) BIOS-e820: 00000000dffae000 - 00000000dffb0000 type 9 BIOS-e820: 00000000dffb0000 - 00000000dffbe000 (ACPI data) BIOS-e820: 00000000dffbe000 - 00000000dfff0000 (ACPI NVS) BIOS-e820: 00000000dfff0000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000220000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917408) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2228224) 2 entries of 3200 used end_pfn_map = 2228224 DMI present. ACPI: RSDP 000F9860, 0024 (r2 ACPIAM) ACPI: XSDT DFFB0100, 007C (r1 042908 XSDT1053 20080429 MSFT 97) ACPI: FACP DFFB0290, 00F4 (r3 042908 FACP1053 20080429 MSFT 97) ACPI: DSDT DFFB04D0, 5414 (r1 CLSea CLSea007 7 INTL 20051117) ACPI: FACS DFFBE000, 0040 ACPI: APIC DFFB0390, 00AA (r1 042908 APIC1053 20080429 MSFT 97) ACPI: MCFG DFFB0490, 003C (r1 042908 OEMMCFG 20080429 MSFT 97) ACPI: OEMB DFFBE040, 0071 (r1 042908 OEMB1053 20080429 MSFT 97) ACPI: HPET DFFB58F0, 0038 (r1 042908 OEMHPET 20080429 MSFT 97) ACPI: ASF! DFFB5928, 0083 (r32 AMIASF E7230ASF 1 INTL 20051117) ACPI: SSDT DFFC0540, 1238 (r1 DpgPmm CpuPm 12 INTL 20051117) ACPI: EINJ DFFB59B0, 0130 (r1 AMIER AMI_EINJ 20080429 MSFT 97) ACPI: BERT DFFB5B40, 0030 (r1 AMIER AMI_BERT 20080429 MSFT 97) ACPI: ERST DFFB5B70, 01B0 (r1 AMIER AMI_ERST 20080429 MSFT 97) ACPI: HEST DFFB5D20, 00A8 (r1 AMIER AMI_HEST 20080429 MSFT 97) No NUMA configuration found Faking a node at 0000000000000000-0000000220000000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917408) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2228224) 2 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000220000000 NODE_DATA [0000000000012000 - 0000000000019fff] bootmap [000000000001a000 - 000000000005dfff] pages 44 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-7c17ff] TEXT DATA BSS early res: 3 [37cc2000-37fef529] RAMDISK early res: 4 [9ec00-a0bff] EBDA early res: 5 [8000-11fff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001c00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002200000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002600000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002800000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810002c00000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003000000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003200000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003600000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003c00000 on node 0 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004000000 on node 0 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004400000 on node 0 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810004600000 on node 0 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810004a00000 on node 0 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810004e00000 on node 0 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005000000 on node 0 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810005400000 on node 0 [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810005800000 on node 0 [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810005a00000 on node 0 [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810005e00000 on node 0 [ffffe20003000000-ffffe200031fffff] PMD ->ffff810006200000 on node 0 [ffffe20003200000-ffffe200033fffff] PMD ->ffff810006400000 on node 0 [ffffe20003400000-ffffe200035fffff] PMD ->ffff810006800000 on node 0 [ffffe20003600000-ffffe200037fffff] PMD ->ffff810006c00000 on node 0 [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0 [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0 [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0 [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007800000 on node 0 [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007c00000 on node 0 [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008000000 on node 0 [ffffe20004400000-ffffe200045fffff] PMD ->ffff810008200000 on node 0 [ffffe20004600000-ffffe200047fffff] PMD ->ffff810008600000 on node 0 [ffffe20004800000-ffffe200049fffff] PMD ->ffff810008a00000 on node 0 [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810008c00000 on node 0 [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810009000000 on node 0 [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810009400000 on node 0 [ffffe20005000000-ffffe200051fffff] PMD ->ffff810009600000 on node 0 [ffffe20005200000-ffffe200053fffff] PMD ->ffff810009a00000 on node 0 [ffffe20006000000-ffffe200061fffff] PMD ->ffff810009e00000 on node 0 [ffffe20006200000-ffffe200063fffff] PMD ->ffff81000a000000 on node 0 [ffffe20006400000-ffffe200065fffff] PMD ->ffff81000a400000 on node 0 [ffffe20006600000-ffffe200067fffff] PMD ->ffff81000a800000 on node 0 [ffffe20006800000-ffffe200069fffff] PMD ->ffff81000aa00000 on node 0 [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000ae00000 on node 0 [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000b200000 on node 0 [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000b400000 on node 0 [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000b800000 on node 0 [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000bc00000 on node 0 [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000be00000 on node 0 [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000c200000 on node 0 [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000c600000 on node 0 [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000c800000 on node 0 [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff81000cc00000 on node 0 [ffffe20007e00000-ffffe20007ffffff] PMD ->ffff81000d000000 on node 0 [ffffe20008000000-ffffe200081fffff] PMD ->ffff81000d200000 on node 0 [ffffe20008200000-ffffe200083fffff] PMD ->ffff81000d600000 on node 0 [ffffe20008400000-ffffe200085fffff] PMD ->ffff81000da00000 on node 0 [ffffe20008600000-ffffe200087fffff] PMD ->ffff81000dc00000 on node 0 [ffffe20008800000-ffffe200089fffff] PMD ->ffff81000e000000 on node 0 [ffffe20008a00000-ffffe20008bfffff] PMD ->ffff81000e400000 on node 0 [ffffe20008c00000-ffffe20008dfffff] PMD ->ffff81000e600000 on node 0 [ffffe20008e00000-ffffe20008ffffff] PMD ->ffff81000ea00000 on node 0 [ffffe20009000000-ffffe200091fffff] PMD ->ffff81000ee00000 on node 0 [ffffe20009200000-ffffe200093fffff] PMD ->ffff81000f000000 on node 0 [ffffe20009400000-ffffe200095fffff] PMD ->ffff81000f400000 on node 0 [ffffe20009600000-ffffe200097fffff] PMD ->ffff81000f800000 on node 0 [ffffe20009800000-ffffe200099fffff] PMD ->ffff81000fa00000 on node 0 [ffffe20009a00000-ffffe20009bfffff] PMD ->ffff81000fe00000 on node 0 [ffffe20009c00000-ffffe20009dfffff] PMD ->ffff810010200000 on node 0 [ffffe20009e00000-ffffe20009ffffff] PMD ->ffff810010400000 on node 0 [ffffe2000a000000-ffffe2000a1fffff] PMD ->ffff810010800000 on node 0 [ffffe2000a200000-ffffe2000a3fffff] PMD ->ffff810010c00000 on node 0 [ffffe2000a400000-ffffe2000a5fffff] PMD ->ffff810010e00000 on node 0 [ffffe2000a600000-ffffe2000a7fffff] PMD ->ffff810011200000 on node 0 [ffffe2000a800000-ffffe2000a9fffff] PMD ->ffff810011600000 on node 0 [ffffe2000aa00000-ffffe2000abfffff] PMD ->ffff810011800000 on node 0 [ffffe2000ac00000-ffffe2000adfffff] PMD ->ffff810011c00000 on node 0 [ffffe2000ae00000-ffffe2000affffff] PMD ->ffff810012000000 on node 0 [ffffe2000b000000-ffffe2000b1fffff] PMD ->ffff810012200000 on node 0 [ffffe2000b200000-ffffe2000b3fffff] PMD ->ffff810012600000 on node 0 [ffffe2000b400000-ffffe2000b5fffff] PMD ->ffff810012a00000 on node 0 [ffffe2000b600000-ffffe2000b7fffff] PMD ->ffff810012c00000 on node 0 [ffffe2000b800000-ffffe2000b9fffff] PMD ->ffff810013000000 on node 0 [ffffe2000ba00000-ffffe2000bbfffff] PMD ->ffff810013400000 on node 0 [ffffe2000bc00000-ffffe2000bdfffff] PMD ->ffff810013600000 on node 0 [ffffe2000be00000-ffffe2000bffffff] PMD ->ffff810013a00000 on node 0 [ffffe2000c000000-ffffe2000c1fffff] PMD ->ffff810013e00000 on node 0 [ffffe2000c200000-ffffe2000c3fffff] PMD ->ffff810014000000 on node 0 [ffffe2000c400000-ffffe2000c5fffff] PMD ->ffff810014400000 on node 0 [ffffe2000c600000-ffffe2000c7fffff] PMD ->ffff810014800000 on node 0 [ffffe2000c800000-ffffe2000c9fffff] PMD ->ffff810014a00000 on node 0 [ffffe2000ca00000-ffffe2000cbfffff] PMD ->ffff810014e00000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2228224 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 917408 0: 1048576 -> 2228224 On node 0 totalpages: 2096959 DMA zone: 96 pages used for memmap DMA zone: 1490 pages reserved DMA zone: 2413 pages, LIFO batch:0 DMA32 zone: 24480 pages used for memmap DMA32 zone: 888832 pages, LIFO batch:31 Normal zone: 27648 pages used for memmap Normal zone: 1152000 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) Processor #4 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) Processor #5 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec88000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48]) IOAPIC[2]: apic_id 10, address 0xfec89000, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000dffa0000 - 00000000dffae000 PM: Registered nosave memory: 00000000dffae000 - 00000000dffb0000 PM: Registered nosave memory: 00000000dffb0000 - 00000000dffbe000 PM: Registered nosave memory: 00000000dffbe000 - 00000000dfff0000 PM: Registered nosave memory: 00000000dfff0000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at f1000000 (gap: f0000000:ee00000) SMP: Allowing 8 CPUs, 0 hotplug CPUs PERCPU: Allocating 44292 bytes of per cpu data Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043245 Policy zone: Normal Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 2327.489 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x15093000 - 0x19093000 Memory: 8114712k/8912896k available (2575k kernel code, 273124k reserved, 1438k data, 376k init) CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay using timer specific routine.. 4724.40 BogoMIPS (lpj=2362200) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 20781154 Detected 20.781 MHz APIC timer. Booting processor 1/8 APIC 0x4 Initializing CPU#1 Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327519) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/4 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/8 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 4655.02 BogoMIPS (lpj=2327514) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/8 APIC 0x2 Initializing CPU#3 Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327507) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 3/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Booting processor 4/8 APIC 0x3 Initializing CPU#4 Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327505) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 4/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU4: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#4]: passed. Booting processor 5/8 APIC 0x5 Initializing CPU#5 Calibrating delay using timer specific routine.. 4578.90 BogoMIPS (lpj=2289453) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 5/5 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU5: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#5]: passed. Booting processor 6/8 APIC 0x6 Initializing CPU#6 Calibrating delay using timer specific routine.. 4654.59 BogoMIPS (lpj=2327298) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 6/6 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU6: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#6]: passed. Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327515) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 7/7 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU7: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs CPU0 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000001 00000000,00000004 domain 1: span 00000000,000000ff groups: 00000000,00000005 00000000,00000022 00000000,00000018 00000000,000000c0 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU1 attaching sched-domain: domain 0: span 00000000,00000022 groups: 00000000,00000002 00000000,00000020 domain 1: span 00000000,000000ff groups: 00000000,00000022 00000000,00000018 00000000,000000c0 00000000,00000005 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU2 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000004 00000000,00000001 domain 1: span 00000000,000000ff groups: 00000000,00000005 00000000,00000022 00000000,00000018 00000000,000000c0 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU3 attaching sched-domain: domain 0: span 00000000,00000018 groups: 00000000,00000008 00000000,00000010 domain 1: span 00000000,000000ff groups: 00000000,00000018 00000000,000000c0 00000000,00000005 00000000,00000022 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU4 attaching sched-domain: domain 0: span 00000000,00000018 groups: 00000000,00000010 00000000,00000008 domain 1: span 00000000,000000ff groups: 00000000,00000018 00000000,000000c0 00000000,00000005 00000000,00000022 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU5 attaching sched-domain: domain 0: span 00000000,00000022 groups: 00000000,00000020 00000000,00000002 domain 1: span 00000000,000000ff groups: 00000000,00000022 00000000,00000018 00000000,000000c0 00000000,00000005 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU6 attaching sched-domain: domain 0: span 00000000,000000c0 groups: 00000000,00000040 00000000,00000080 domain 1: span 00000000,000000ff groups: 00000000,000000c0 00000000,00000005 00000000,00000022 00000000,00000018 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU7 attaching sched-domain: domain 0: span 00000000,000000c0 groups: 00000000,00000080 00000000,00000040 domain 1: span 00000000,000000ff groups: 00000000,000000c0 00000000,00000005 00000000,00000022 00000000,00000018 domain 2: span 00000000,000000ff groups: 00000000,000000ff net_namespace: 1176 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.SPE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.SPE4.SPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.SPE4.P8PC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.BMPX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 39, should be 36 [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered 00:01: mem resource (0xfe000000-0xfebfffff) overlaps 0000:00:09.0 BAR 8 (0xfde00000-0xfebfffff), disabling pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:08: ioport range 0xa00-0xa0f has been reserved system 00:08: ioport range 0xa10-0xa1f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x480-0x4bf has been reserved system 00:09: iomem range 0xfed04000-0xfed1bfff has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed20000-0xfed44fff has been reserved system 00:09: iomem range 0xfed45000-0xfed9ffff has been reserved system 00:09: iomem range 0xfeda0000-0xfedbffff has been reserved system 00:09: iomem range 0xfec01000-0xfec7ffff has been reserved system 00:09: iomem range 0xfec80000-0xfec85fff has been reserved system 00:09: iomem range 0xfec86000-0xfec8ffff has been reserved system 00:09: iomem range 0xff000000-0xff3fffff has been reserved system 00:09: iomem range 0xff400000-0xff7fffff has been reserved system 00:09: iomem range 0xff800000-0xffbfffff could not be reserved system 00:09: iomem range 0xffc00000-0xffffffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0xc0000-0xcffff has been reserved system 00:0f: iomem range 0xe0000-0xfffff could not be reserved system 00:0f: iomem range 0x100000-0xdfffffff could not be reserved system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:07:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:07:02.0 IO window: e000-efff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: e000-efff MEM window: 0xfdf00000-0xfebfffff PREFETCH window: disabled. PCI: Bridge: 0000:05:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:09.0 IO window: e000-efff MEM window: 0xfde00000-0xfebfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: d000-dfff MEM window: 0xfdd00000-0xfddfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: c000-cfff MEM window: 0xfdc00000-0xfdcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: b000-bfff MEM window: 0xfdb00000-0xfdbfffff PREFETCH window: 0x00000000f8000000-0x00000000fbffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 48 (level, low) -> IRQ 48 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 52 (level, low) -> IRQ 52 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 56 (level, low) -> IRQ 56 PCI: Setting latency timer of device 0000:00:09.0 to 64 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:07:00.0 to 64 PCI: Setting latency timer of device 0000:07:02.0 to 64 PCI: Setting latency timer of device 0000:05:00.3 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3253k freed audit: initializing netlink socket (disabled) type=2000 audit(1214756782.001:1): initialized krcupreemptd setsched 0 prio = 98 Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:02.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:09.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:09.0:pcie00] Allocate Port Service[0000:00:09.0:pcie01] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] PCI: Setting latency timer of device 0000:05:00.0 to 64 Allocate Port Service[0000:05:00.0:pcie11] PCI: Setting latency timer of device 0000:07:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:07:00.0:pcie21] PCI: Setting latency timer of device 0000:07:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:07:02.0:pcie21] AER service couldn't init device 0000:00:01.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:09.0:pcie01 - no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: SSDT DFFBE0C0, 01F3 (r1 DpgPmm P001Ist 11 INTL 20051117) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [P001] (supports 8 throttling states) ACPI: SSDT DFFBE550, 01F3 (r1 DpgPmm P002Ist 12 INTL 20051117) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: SSDT DFFBE9E0, 01F3 (r1 DpgPmm P003Ist 12 INTL 20051117) ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: SSDT DFFBEE70, 01F3 (r1 DpgPmm P004Ist 12 INTL 20051117) ACPI: ACPI0007:03 is registered as cooling_device3 ACPI: SSDT DFFBF300, 01F3 (r1 DpgPmm P005Ist 12 INTL 20051117) ACPI: ACPI0007:04 is registered as cooling_device4 ACPI: SSDT DFFBF790, 01F3 (r1 DpgPmm P006Ist 12 INTL 20051117) ACPI: ACPI0007:05 is registered as cooling_device5 ACPI: SSDT DFFBFC20, 01F3 (r1 DpgPmm P007Ist 12 INTL 20051117) ACPI: ACPI0007:06 is registered as cooling_device6 ACPI: SSDT DFFC00B0, 01F3 (r1 DpgPmm P008Ist 12 INTL 20051117) ACPI: ACPI0007:07 is registered as cooling_device7 Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid /home/nwatkins/linux-2.6.25.8/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 376k freed Write protecting the kernel read-only data: 1152k BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 BUG: swapper:1 task might have lost a preemption check! BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __atomic_notifier_call_chain+0x3c/0x48 [] notify_write+0x20/0x25 [] vt_console_print+0x1e3/0x293 [] __call_console_drivers+0xa8/0xcd [] release_console_sem+0x11f/0x1b6 [] vprintk+0x327/0x364 [] printk+0x4e/0x56 [] printk+0x4e/0x56 [] dump_trace+0x25f/0x2ae [] show_trace+0x53/0x61 [] dump_stack+0x69/0x6f [] __printk_ratelimit+0x6d/0xa6 [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __atomic_notifier_call_chain+0x3c/0x48 [] notify_write+0x20/0x25 [] vt_console_print+0x1e3/0x293 [] __call_console_drivers+0xa8/0xcd [] release_console_sem+0x11f/0x1b6 [] vprintk+0x327/0x364 [] printk+0x4e/0x56 [] printk+0x4e/0x56 [] dump_trace+0x25f/0x2ae [] show_trace+0x53/0x61 [] dump_stack+0x69/0x6f [] __printk_ratelimit+0x6d/0xa6 [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __atomic_notifier_call_chain+0x3c/0x48 [] notify_write+0x20/0x25 [] vt_console_print+0x1e3/0x293 [] __call_console_drivers+0xa8/0xcd [] release_console_sem+0x11f/0x1b6 [] vprintk+0x327/0x364 [] printk+0x4e/0x56 [] printk+0x4e/0x56 [] dump_trace+0x25f/0x2ae [] show_trace+0x53/0x61 [] dump_stack+0x69/0x6f [] __printk_ratelimit+0x6d/0xa6 [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __atomic_notifier_call_chain+0x3c/0x48 [] notify_write+0x20/0x25 [] vt_console_print+0x1e3/0x293 [] __call_console_drivers+0xa8/0xcd [] release_console_sem+0x11f/0x1b6 [] vprintk+0x327/0x364 [] printk+0x4e/0x56 [] printk+0x4e/0x56 [] dump_trace+0x25f/0x2ae [] show_trace+0x53/0x61 [] dump_stack+0x69/0x6f [] __printk_ratelimit+0x6d/0xa6 [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __atomic_notifier_call_chain+0x3c/0x48 [] notify_write+0x20/0x25 [] vt_console_print+0x1e3/0x293 [] __call_console_drivers+0xa8/0xcd [] release_console_sem+0x11f/0x1b6 [] vprintk+0x327/0x364 [] printk+0x4e/0x56 [] printk+0x4e/0x56 [] dump_trace+0x25f/0x2ae [] show_trace+0x53/0x61 [] dump_stack+0x69/0x6f [] __printk_ratelimit+0x6d/0xa6 [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __atomic_notifier_call_chain+0x3c/0x48 [] notify_write+0x20/0x25 [] vt_console_print+0x1e3/0x293 [] __call_console_drivers+0xa8/0xcd [] release_console_sem+0x11f/0x1b6 [] vprintk+0x327/0x364 [] printk+0x4e/0x56 [] printk+0x4e/0x56 [] dump_trace+0x25f/0x2ae [] show_trace+0x53/0x61 [] dump_stack+0x69/0x6f [] __printk_ratelimit+0x6d/0xa6 [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __atomic_notifier_call_chain+0x3c/0x48 [] notify_write+0x20/0x25 [] vt_console_print+0x1e3/0x293 [] __call_console_drivers+0xa8/0xcd [] release_console_sem+0x11f/0x1b6 [] vprintk+0x327/0x364 [] printk+0x4e/0x56 [] printk+0x4e/0x56 [] dump_trace+0x25f/0x2ae [] show_trace+0x53/0x61 [] dump_stack+0x69/0x6f [] __printk_ratelimit+0x6d/0xa6 [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __atomic_notifier_call_chain+0x3c/0x48 [] notify_write+0x20/0x25 [] vt_console_print+0x1e3/0x293 [] __call_console_drivers+0xa8/0xcd [] release_console_sem+0x11f/0x1b6 [] vprintk+0x327/0x364 [] printk+0x4e/0x56 [] printk+0x4e/0x56 [] dump_trace+0x25f/0x2ae [] show_trace+0x53/0x61 [] dump_stack+0x69/0x6f [] __printk_ratelimit+0x6d/0xa6 [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 Call Trace: [] preempt_enable_no_resched+0x57/0x5f [] debug_smp_processor_id+0xb2/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] avc_has_perm_noaudit+0x39d/0x455 [] do_try_to_take_rt_mutex+0x165/0x193 [] avc_has_perm+0x2b/0x5b [] inode_has_perm+0x65/0x72 [] __link_path_walk+0x146/0xdb8 [] __inc_zone_state+0x6a/0x88 [] __rt_spin_lock+0x27/0x66 [] path_walk+0x5d/0xb8 [] do_path_lookup+0x17e/0x1f5 [] __path_lookup_intent_open+0x56/0x97 [] open_namei+0x7d/0x681 [] __smp_call_function_mask+0x86/0xbb [] __cpa_flush_range+0x0/0x14 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] init_post+0x35/0xfa [] __spin_unlock+0x10/0x2b [] finish_task_switch+0x32/0xe4 [] child_rip+0xa/0x12 [] child_rip+0x0/0x12 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdaff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdaffd00 irq 19 ata2: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdaffd80 irq 19 ata3: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdaffe00 irq 19 ata4: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdaffe80 irq 19 ata5: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdafff00 irq 19 ata6: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdafff80 irq 19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: WDC WD800JD-00MSA1, 10.01E01, max UDMA/133 ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: Optiarc DVD RW AD-7190S, 1.01, max UDMA/100 ata2.00: configured for UDMA/100 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133 ata4.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) printk: 6969 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: insmod/676 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 676, comm: insmod Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] cfq_cic_lookup+0x4d/0xe3 [] cfq_set_request+0x7b/0x31c [] get_request+0x1a3/0x2d0 [] get_request_wait+0x28/0x16e [] kmem_cache_alloc_node+0x129/0x152 [] :scsi_mod:scsi_execute+0x34/0xe6 [] :scsi_mod:scsi_execute_req+0xb9/0xde [] :scsi_mod:scsi_probe_and_add_lun+0x241/0xa9d [] klist_add_tail+0x35/0x41 [] kobject_get+0x12/0x17 [] :scsi_mod:scsi_alloc_target+0x255/0x335 [] :scsi_mod:__scsi_add_device+0xab/0xe3 [] :libata:ata_scsi_scan_host+0xa8/0x272 [] :libata:ata_host_register+0x23f/0x265 [] :libata:ata_host_activate+0xb5/0xd8 [] :ahci:ahci_init_one+0x989/0x9c0 [] pci_device_probe+0xb3/0xfd [] driver_probe_device+0xd9/0x156 [] __driver_attach+0x46/0x6d [] __driver_attach+0x0/0x6d [] bus_for_each_dev+0x47/0x72 [] kmem_cache_alloc+0x100/0x127 [] bus_add_driver+0xb7/0x208 [] driver_register+0x59/0xcd [] __pci_register_driver+0x57/0x8b [] sys_init_module+0x9b/0x196 [] system_call_after_swapgs+0x7b/0x80 scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-00MS 10.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7190S 1.01 PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA ST380811AS 3.AA PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 3:0:0:0: [sdb] Attached SCSI disk printk: 465 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: init/1 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1, comm: init Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] __fput+0x122/0x18e [] filp_close+0x5d/0x65 [] sys_close+0x89/0xcb [] system_call_after_swapgs+0x7b/0x80 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi6 : ata_piix scsi7 : ata_piix ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks printk: 22393 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: rhgb-client/765 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 765, comm: rhgb-client Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] find_get_page+0x172/0x182 [] __lock_page+0xc1/0xc6 [] find_lock_page+0x15/0x61 [] filemap_fault+0x75/0x3a2 [] __do_fault+0x63/0x3f6 [] handle_mm_fault+0x37c/0x797 [] __spin_unlock+0x10/0x2b [] do_page_fault+0x3f7/0x7b2 [] error_exit+0x0/0x51 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 sd 3:0:0:0: Attached scsi generic sg2 type 0 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 input: PC Speaker as /class/input/input3 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 intel_rng: FWH not detected e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:08:00.0 to 64 eth0: (PCI Express:2.5GB/s:Width x4) 00:1f:c6:e3:40:52 eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:08:00.1 to 64 eth1: (PCI Express:2.5GB/s:Width x4) 00:1f:c6:e3:40:53 eth1: Intel(R) PRO/1000 Network Connection eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth2: (PCI Express:2.5GB/s:Width x1) 00:1f:c6:e3:41:4c eth2: Intel(R) PRO/1000 Network Connection eth2: MAC: 2, PHY: 2, PBA No: ffffff-0ff ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth3: (PCI Express:2.5GB/s:Width x1) 00:1f:c6:e3:40:f5 eth3: Intel(R) PRO/1000 Network Connection eth3: MAC: 2, PHY: 2, PBA No: ffffff-0ff device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded printk: 258804 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: fsck/1699 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 1699, comm: fsck Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] find_get_page+0x172/0x182 [] file_read_actor+0x56/0x12e [] file_read_actor+0xab/0x12e [] generic_file_aio_read+0x1b0/0x4cf [] do_sync_read+0xc9/0x10c [] __alloc_pages+0x84/0x31a [] autoremove_wake_function+0x0/0x2e [] __spin_unlock+0x10/0x2b [] vfs_read+0xaa/0x152 [] sys_read+0x48/0x74 [] system_call_after_swapgs+0x7b/0x80 EXT3 FS on sdb2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 522104k swap on /dev/sdb3. Priority:-1 extents:1 across:522104k IA-32 Microcode Update Driver: v1.14a warning: process `kudzu' used the deprecated sysctl system call with 1.23. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready printk: 135272 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: usleep/2171 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 2171, comm: usleep Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] find_get_page+0x172/0x182 [] find_lock_page+0x15/0x61 [] filemap_fault+0x75/0x3a2 [] __do_fault+0x63/0x3f6 [] lock_hrtimer_base+0x1b/0x3c [] handle_mm_fault+0x37c/0x797 [] __spin_unlock+0x10/0x2b [] do_page_fault+0x3f7/0x7b2 [] do_nanosleep+0x41/0x9c [] error_exit+0x0/0x51 eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready RPC: Registered udp transport module. RPC: Registered tcp transport module. fuse init (API version 7.9) printk: 165330 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: rsyslogd/2593 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 2593, comm: rsyslogd Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] fget_light+0x94/0x9c [] sys_write+0x21/0x74 [] tracesys+0x71/0xe1 [] tracesys+0xdc/0xe1 warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 printk: 115847 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: yum-updatesd/2886 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 2886, comm: yum-updatesd Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] find_get_page+0x172/0x182 [] __lock_page_killable+0xc1/0xc6 [] file_read_actor+0xab/0x12e [] generic_file_aio_read+0x1b0/0x4cf [] do_sync_read+0xc9/0x10c [] autoremove_wake_function+0x0/0x2e [] vfs_read+0xaa/0x152 [] sys_read+0x48/0x74 [] tracesys+0xdc/0xe1 eth0: no IPv6 routers present printk: 113284 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: gam_server/2959 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 2959, comm: gam_server Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] put_filp+0x1c/0x44 [] __path_lookup_intent_open+0x87/0x97 [] open_namei+0x7d/0x681 [] do_filp_open+0x1c/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] tracesys+0xdc/0xe1 printk: 72709 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: pwunconv/3081 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 3081, comm: pwunconv Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] file_move+0x1c/0xa6 [] __dentry_open+0xf9/0x204 [] do_filp_open+0x2a/0x38 [] get_unused_fd_flags+0x111/0x11f [] do_sys_open+0x46/0xc3 [] tracesys+0xdc/0xe1 printk: 37677 messages suppressed. BUG: using smp_processor_id() in preemptible [00000000] code: sshd/3097 caller is __rcu_preempt_unboost+0x1f/0xee Pid: 3097, comm: sshd Not tainted 2.6.25.8-rt7 #1 Call Trace: [] debug_smp_processor_id+0xad/0xb8 [] __rcu_preempt_unboost+0x1f/0xee [] core_sys_select+0x56/0x270 [] do_sync_read+0xc9/0x10c [] autoremove_wake_function+0x0/0x2e [] current_fs_time+0x1e/0x24 [] sys_select+0xba/0x182 [] tracesys+0xdc/0xe1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/