Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755115AbYF2WXr (ORCPT ); Sun, 29 Jun 2008 18:23:47 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751995AbYF2WXg (ORCPT ); Sun, 29 Jun 2008 18:23:36 -0400 Received: from wa-out-1112.google.com ([209.85.146.178]:33617 "EHLO wa-out-1112.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752528AbYF2WXd (ORCPT ); Sun, 29 Jun 2008 18:23:33 -0400 Subject: Re: [BUG RT] 2.6.25.8-rt7 on 8-way From: Sven-Thorsten Dietrich To: Noah Watkins Cc: LKML , Steven Rostedt , RT , Ingo Molnar , Thomas Gleixner , paulmck In-Reply-To: <7618ba960806291432l20b7b6b5lea4b60bafa68c3bf@mail.gmail.com> References: <7618ba960806291432l20b7b6b5lea4b60bafa68c3bf@mail.gmail.com> Content-Type: text/plain Organization: The Big Corporation Date: Sun, 29 Jun 2008 15:23:25 -0700 Message-Id: <1214778205.13292.6.camel@dd.thebigcorporation.com> Mime-Version: 1.0 X-Mailer: Evolution 2.22.1.1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 71158 Lines: 1475 On Sun, 2008-06-29 at 16:32 -0500, Noah Watkins wrote: > My kernel is very, very noisy with the following bug: > > - Full dmesg below > - Please CC me > I found this as well (adding Paul). If you disable CONFIG_PREEMPT_RCU_BOOST, does it go away? Regards, Sven > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > > > Initializing cgroup subsys cpuset > Linux version 2.6.25.8-rt7 (nwatkins@kuspsmp.ittc.ku.edu) (gcc version > 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP PREEMPT RT Sun Jun 29 > 15:42:24 CDT 2008 > Command line: ro root=LABEL=/ rhgb quiet > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000dffa0000 (usable) > BIOS-e820: 00000000dffae000 - 00000000dffb0000 type 9 > BIOS-e820: 00000000dffb0000 - 00000000dffbe000 (ACPI data) > BIOS-e820: 00000000dffbe000 - 00000000dfff0000 (ACPI NVS) > BIOS-e820: 00000000dfff0000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 0000000220000000 (usable) > Entering add_active_range(0, 0, 159) 0 entries of 3200 used > Entering add_active_range(0, 256, 917408) 1 entries of 3200 used > Entering add_active_range(0, 1048576, 2228224) 2 entries of 3200 used > end_pfn_map = 2228224 > DMI present. > ACPI: RSDP 000F9860, 0024 (r2 ACPIAM) > ACPI: XSDT DFFB0100, 007C (r1 042908 XSDT1053 20080429 MSFT 97) > ACPI: FACP DFFB0290, 00F4 (r3 042908 FACP1053 20080429 MSFT 97) > ACPI: DSDT DFFB04D0, 5414 (r1 CLSea CLSea007 7 INTL 20051117) > ACPI: FACS DFFBE000, 0040 > ACPI: APIC DFFB0390, 00AA (r1 042908 APIC1053 20080429 MSFT 97) > ACPI: MCFG DFFB0490, 003C (r1 042908 OEMMCFG 20080429 MSFT 97) > ACPI: OEMB DFFBE040, 0071 (r1 042908 OEMB1053 20080429 MSFT 97) > ACPI: HPET DFFB58F0, 0038 (r1 042908 OEMHPET 20080429 MSFT 97) > ACPI: ASF! DFFB5928, 0083 (r32 AMIASF E7230ASF 1 INTL 20051117) > ACPI: SSDT DFFC0540, 1238 (r1 DpgPmm CpuPm 12 INTL 20051117) > ACPI: EINJ DFFB59B0, 0130 (r1 AMIER AMI_EINJ 20080429 MSFT 97) > ACPI: BERT DFFB5B40, 0030 (r1 AMIER AMI_BERT 20080429 MSFT 97) > ACPI: ERST DFFB5B70, 01B0 (r1 AMIER AMI_ERST 20080429 MSFT 97) > ACPI: HEST DFFB5D20, 00A8 (r1 AMIER AMI_HEST 20080429 MSFT 97) > No NUMA configuration found > Faking a node at 0000000000000000-0000000220000000 > Entering add_active_range(0, 0, 159) 0 entries of 3200 used > Entering add_active_range(0, 256, 917408) 1 entries of 3200 used > Entering add_active_range(0, 1048576, 2228224) 2 entries of 3200 used > Bootmem setup node 0 0000000000000000-0000000220000000 > NODE_DATA [0000000000012000 - 0000000000019fff] > bootmap [000000000001a000 - 000000000005dfff] pages 44 > early res: 0 [0-fff] BIOS data page > early res: 1 [6000-7fff] SMP_TRAMPOLINE > early res: 2 [200000-7c17ff] TEXT DATA BSS > early res: 3 [37cc2000-37fef529] RAMDISK > early res: 4 [9ec00-a0bff] EBDA > early res: 5 [8000-11fff] PGTABLE > [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 > [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0 > [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0 > [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001c00000 on node 0 > [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001e00000 on node 0 > [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002200000 on node 0 > [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002600000 on node 0 > [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002800000 on node 0 > [ffffe20001000000-ffffe200011fffff] PMD ->ffff810002c00000 on node 0 > [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003000000 on node 0 > [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003200000 on node 0 > [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003600000 on node 0 > [ffffe20001800000-ffffe200019fffff] PMD ->ffff810003a00000 on node 0 > [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003c00000 on node 0 > [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004000000 on node 0 > [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004400000 on node 0 > [ffffe20002000000-ffffe200021fffff] PMD ->ffff810004600000 on node 0 > [ffffe20002200000-ffffe200023fffff] PMD ->ffff810004a00000 on node 0 > [ffffe20002400000-ffffe200025fffff] PMD ->ffff810004e00000 on node 0 > [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005000000 on node 0 > [ffffe20002800000-ffffe200029fffff] PMD ->ffff810005400000 on node 0 > [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810005800000 on node 0 > [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810005a00000 on node 0 > [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810005e00000 on node 0 > [ffffe20003000000-ffffe200031fffff] PMD ->ffff810006200000 on node 0 > [ffffe20003200000-ffffe200033fffff] PMD ->ffff810006400000 on node 0 > [ffffe20003400000-ffffe200035fffff] PMD ->ffff810006800000 on node 0 > [ffffe20003600000-ffffe200037fffff] PMD ->ffff810006c00000 on node 0 > [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0 > [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0 > [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0 > [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007800000 on node 0 > [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007c00000 on node 0 > [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008000000 on node 0 > [ffffe20004400000-ffffe200045fffff] PMD ->ffff810008200000 on node 0 > [ffffe20004600000-ffffe200047fffff] PMD ->ffff810008600000 on node 0 > [ffffe20004800000-ffffe200049fffff] PMD ->ffff810008a00000 on node 0 > [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810008c00000 on node 0 > [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810009000000 on node 0 > [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810009400000 on node 0 > [ffffe20005000000-ffffe200051fffff] PMD ->ffff810009600000 on node 0 > [ffffe20005200000-ffffe200053fffff] PMD ->ffff810009a00000 on node 0 > [ffffe20006000000-ffffe200061fffff] PMD ->ffff810009e00000 on node 0 > [ffffe20006200000-ffffe200063fffff] PMD ->ffff81000a000000 on node 0 > [ffffe20006400000-ffffe200065fffff] PMD ->ffff81000a400000 on node 0 > [ffffe20006600000-ffffe200067fffff] PMD ->ffff81000a800000 on node 0 > [ffffe20006800000-ffffe200069fffff] PMD ->ffff81000aa00000 on node 0 > [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000ae00000 on node 0 > [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000b200000 on node 0 > [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000b400000 on node 0 > [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000b800000 on node 0 > [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000bc00000 on node 0 > [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000be00000 on node 0 > [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000c200000 on node 0 > [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000c600000 on node 0 > [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000c800000 on node 0 > [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff81000cc00000 on node 0 > [ffffe20007e00000-ffffe20007ffffff] PMD ->ffff81000d000000 on node 0 > [ffffe20008000000-ffffe200081fffff] PMD ->ffff81000d200000 on node 0 > [ffffe20008200000-ffffe200083fffff] PMD ->ffff81000d600000 on node 0 > [ffffe20008400000-ffffe200085fffff] PMD ->ffff81000da00000 on node 0 > [ffffe20008600000-ffffe200087fffff] PMD ->ffff81000dc00000 on node 0 > [ffffe20008800000-ffffe200089fffff] PMD ->ffff81000e000000 on node 0 > [ffffe20008a00000-ffffe20008bfffff] PMD ->ffff81000e400000 on node 0 > [ffffe20008c00000-ffffe20008dfffff] PMD ->ffff81000e600000 on node 0 > [ffffe20008e00000-ffffe20008ffffff] PMD ->ffff81000ea00000 on node 0 > [ffffe20009000000-ffffe200091fffff] PMD ->ffff81000ee00000 on node 0 > [ffffe20009200000-ffffe200093fffff] PMD ->ffff81000f000000 on node 0 > [ffffe20009400000-ffffe200095fffff] PMD ->ffff81000f400000 on node 0 > [ffffe20009600000-ffffe200097fffff] PMD ->ffff81000f800000 on node 0 > [ffffe20009800000-ffffe200099fffff] PMD ->ffff81000fa00000 on node 0 > [ffffe20009a00000-ffffe20009bfffff] PMD ->ffff81000fe00000 on node 0 > [ffffe20009c00000-ffffe20009dfffff] PMD ->ffff810010200000 on node 0 > [ffffe20009e00000-ffffe20009ffffff] PMD ->ffff810010400000 on node 0 > [ffffe2000a000000-ffffe2000a1fffff] PMD ->ffff810010800000 on node 0 > [ffffe2000a200000-ffffe2000a3fffff] PMD ->ffff810010c00000 on node 0 > [ffffe2000a400000-ffffe2000a5fffff] PMD ->ffff810010e00000 on node 0 > [ffffe2000a600000-ffffe2000a7fffff] PMD ->ffff810011200000 on node 0 > [ffffe2000a800000-ffffe2000a9fffff] PMD ->ffff810011600000 on node 0 > [ffffe2000aa00000-ffffe2000abfffff] PMD ->ffff810011800000 on node 0 > [ffffe2000ac00000-ffffe2000adfffff] PMD ->ffff810011c00000 on node 0 > [ffffe2000ae00000-ffffe2000affffff] PMD ->ffff810012000000 on node 0 > [ffffe2000b000000-ffffe2000b1fffff] PMD ->ffff810012200000 on node 0 > [ffffe2000b200000-ffffe2000b3fffff] PMD ->ffff810012600000 on node 0 > [ffffe2000b400000-ffffe2000b5fffff] PMD ->ffff810012a00000 on node 0 > [ffffe2000b600000-ffffe2000b7fffff] PMD ->ffff810012c00000 on node 0 > [ffffe2000b800000-ffffe2000b9fffff] PMD ->ffff810013000000 on node 0 > [ffffe2000ba00000-ffffe2000bbfffff] PMD ->ffff810013400000 on node 0 > [ffffe2000bc00000-ffffe2000bdfffff] PMD ->ffff810013600000 on node 0 > [ffffe2000be00000-ffffe2000bffffff] PMD ->ffff810013a00000 on node 0 > [ffffe2000c000000-ffffe2000c1fffff] PMD ->ffff810013e00000 on node 0 > [ffffe2000c200000-ffffe2000c3fffff] PMD ->ffff810014000000 on node 0 > [ffffe2000c400000-ffffe2000c5fffff] PMD ->ffff810014400000 on node 0 > [ffffe2000c600000-ffffe2000c7fffff] PMD ->ffff810014800000 on node 0 > [ffffe2000c800000-ffffe2000c9fffff] PMD ->ffff810014a00000 on node 0 > [ffffe2000ca00000-ffffe2000cbfffff] PMD ->ffff810014e00000 on node 0 > Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 2228224 > Movable zone start PFN for each node > early_node_map[3] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 917408 > 0: 1048576 -> 2228224 > On node 0 totalpages: 2096959 > DMA zone: 96 pages used for memmap > DMA zone: 1490 pages reserved > DMA zone: 2413 pages, LIFO batch:0 > DMA32 zone: 24480 pages used for memmap > DMA32 zone: 888832 pages, LIFO batch:31 > Normal zone: 27648 pages used for memmap > Normal zone: 1152000 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 (Bootup-CPU) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > Processor #4 > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) > Processor #1 > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) > Processor #2 > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) > Processor #3 > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > Processor #5 > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) > Processor #6 > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > Processor #7 > ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) > IOAPIC[1]: apic_id 9, address 0xfec88000, GSI 24-47 > ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48]) > IOAPIC[2]: apic_id 10, address 0xfec89000, GSI 48-71 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 > PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 > PM: Registered nosave memory: 00000000dffa0000 - 00000000dffae000 > PM: Registered nosave memory: 00000000dffae000 - 00000000dffb0000 > PM: Registered nosave memory: 00000000dffb0000 - 00000000dffbe000 > PM: Registered nosave memory: 00000000dffbe000 - 00000000dfff0000 > PM: Registered nosave memory: 00000000dfff0000 - 00000000f0000000 > PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000 > PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 > PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 > Allocating PCI resources starting at f1000000 (gap: f0000000:ee00000) > SMP: Allowing 8 CPUs, 0 hotplug CPUs > PERCPU: Allocating 44292 bytes of per cpu data > Real-Time Preemption Support (C) 2004-2007 Ingo Molnar > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043245 > Policy zone: Normal > Kernel command line: ro root=LABEL=/ rhgb quiet > Initializing CPU#0 > Preemptible RCU implementation. > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > TSC calibrated against PM_TIMER > time.c: Detected 2327.489 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Checking aperture... > Calgary: detecting Calgary via BIOS EBDA area > Calgary: Unable to locate Rio Grande table in EBDA - bailing! > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > Placing software IO TLB between 0x15093000 - 0x19093000 > Memory: 8114712k/8912896k available (2575k kernel code, 273124k > reserved, 1438k data, 376k init) > CPA: page pool initialized 1 of 1 pages preallocated > hpet clockevent registered > Calibrating delay using timer specific routine.. 4724.40 BogoMIPS (lpj=2362200) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 6144K > CPU 0/0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring enabled (TM2) > using mwait in idle threads. > ACPI: Core revision 20070126 > Using local APIC timer interrupts. > APIC timer calibration result 20781154 > Detected 20.781 MHz APIC timer. > Booting processor 1/8 APIC 0x4 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327519) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 6144K > CPU 1/4 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 0 > CPU1: Thermal monitoring enabled (TM2) > Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Booting processor 2/8 APIC 0x1 > Initializing CPU#2 > Calibrating delay using timer specific routine.. 4655.02 BogoMIPS (lpj=2327514) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 6144K > CPU 2/1 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU2: Thermal monitoring enabled (TM2) > Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#2]: passed. > Booting processor 3/8 APIC 0x2 > Initializing CPU#3 > Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327507) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 6144K > CPU 3/2 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 2 > CPU3: Thermal monitoring enabled (TM2) > Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#3]: passed. > Booting processor 4/8 APIC 0x3 > Initializing CPU#4 > Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327505) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 6144K > CPU 4/3 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 3 > CPU4: Thermal monitoring enabled (TM2) > Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#4]: passed. > Booting processor 5/8 APIC 0x5 > Initializing CPU#5 > Calibrating delay using timer specific routine.. 4578.90 BogoMIPS (lpj=2289453) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 6144K > CPU 5/5 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 1 > CPU5: Thermal monitoring enabled (TM2) > Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#5]: passed. > Booting processor 6/8 APIC 0x6 > Initializing CPU#6 > Calibrating delay using timer specific routine.. 4654.59 BogoMIPS (lpj=2327298) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 6144K > CPU 6/6 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 2 > CPU6: Thermal monitoring enabled (TM2) > Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#6]: passed. > Booting processor 7/8 APIC 0x7 > Initializing CPU#7 > Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327515) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 6144K > CPU 7/7 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 3 > CPU7: Thermal monitoring enabled (TM2) > Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#7]: passed. > Brought up 8 CPUs > CPU0 attaching sched-domain: > domain 0: span 00000000,00000005 > groups: 00000000,00000001 00000000,00000004 > domain 1: span 00000000,000000ff > groups: 00000000,00000005 00000000,00000022 00000000,00000018 > 00000000,000000c0 > domain 2: span 00000000,000000ff > groups: 00000000,000000ff > CPU1 attaching sched-domain: > domain 0: span 00000000,00000022 > groups: 00000000,00000002 00000000,00000020 > domain 1: span 00000000,000000ff > groups: 00000000,00000022 00000000,00000018 00000000,000000c0 > 00000000,00000005 > domain 2: span 00000000,000000ff > groups: 00000000,000000ff > CPU2 attaching sched-domain: > domain 0: span 00000000,00000005 > groups: 00000000,00000004 00000000,00000001 > domain 1: span 00000000,000000ff > groups: 00000000,00000005 00000000,00000022 00000000,00000018 > 00000000,000000c0 > domain 2: span 00000000,000000ff > groups: 00000000,000000ff > CPU3 attaching sched-domain: > domain 0: span 00000000,00000018 > groups: 00000000,00000008 00000000,00000010 > domain 1: span 00000000,000000ff > groups: 00000000,00000018 00000000,000000c0 00000000,00000005 > 00000000,00000022 > domain 2: span 00000000,000000ff > groups: 00000000,000000ff > CPU4 attaching sched-domain: > domain 0: span 00000000,00000018 > groups: 00000000,00000010 00000000,00000008 > domain 1: span 00000000,000000ff > groups: 00000000,00000018 00000000,000000c0 00000000,00000005 > 00000000,00000022 > domain 2: span 00000000,000000ff > groups: 00000000,000000ff > CPU5 attaching sched-domain: > domain 0: span 00000000,00000022 > groups: 00000000,00000020 00000000,00000002 > domain 1: span 00000000,000000ff > groups: 00000000,00000022 00000000,00000018 00000000,000000c0 > 00000000,00000005 > domain 2: span 00000000,000000ff > groups: 00000000,000000ff > CPU6 attaching sched-domain: > domain 0: span 00000000,000000c0 > groups: 00000000,00000040 00000000,00000080 > domain 1: span 00000000,000000ff > groups: 00000000,000000c0 00000000,00000005 00000000,00000022 > 00000000,00000018 > domain 2: span 00000000,000000ff > groups: 00000000,000000ff > CPU7 attaching sched-domain: > domain 0: span 00000000,000000c0 > groups: 00000000,00000080 00000000,00000040 > domain 1: span 00000000,000000ff > groups: 00000000,000000c0 00000000,00000005 00000000,00000022 > 00000000,00000018 > domain 2: span 00000000,000000ff > groups: 00000000,000000ff > net_namespace: 1176 bytes > NET: Registered protocol family 16 > No dock devices found. > ACPI: bus type pci registered > PCI: Using MMCONFIG at e0000000 - efffffff > PCI: Using configuration type 1 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: Error attaching device data > ACPI: Error attaching device data > ACPI: Error attaching device data > ACPI: Error attaching device data > ACPI: Error attaching device data > ACPI: Error attaching device data > ACPI: Error attaching device data > ACPI: Error attaching device data > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.SPE4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.SPE4.SPE1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.SPE4.P8PC._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.BMPX._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) > ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 39, > should be 36 [20070126] > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > 00:01: mem resource (0xfe000000-0xfebfffff) overlaps 0000:00:09.0 BAR > 8 (0xfde00000-0xfebfffff), disabling > pnp: PnP ACPI: found 16 devices > ACPI: ACPI bus type pnp unregistered > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > PCI-GART: No AMD northbridge found. > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 64-bit timers, 14318180 Hz > system 00:08: ioport range 0xa00-0xa0f has been reserved > system 00:08: ioport range 0xa10-0xa1f has been reserved > system 00:09: ioport range 0x4d0-0x4d1 has been reserved > system 00:09: ioport range 0x800-0x87f has been reserved > system 00:09: ioport range 0x480-0x4bf has been reserved > system 00:09: iomem range 0xfed04000-0xfed1bfff has been reserved > system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:09: iomem range 0xfed20000-0xfed44fff has been reserved > system 00:09: iomem range 0xfed45000-0xfed9ffff has been reserved > system 00:09: iomem range 0xfeda0000-0xfedbffff has been reserved > system 00:09: iomem range 0xfec01000-0xfec7ffff has been reserved > system 00:09: iomem range 0xfec80000-0xfec85fff has been reserved > system 00:09: iomem range 0xfec86000-0xfec8ffff has been reserved > system 00:09: iomem range 0xff000000-0xff3fffff has been reserved > system 00:09: iomem range 0xff400000-0xff7fffff has been reserved > system 00:09: iomem range 0xff800000-0xffbfffff could not be reserved > system 00:09: iomem range 0xffc00000-0xffffffff could not be reserved > system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved > system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved > system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved > system 00:0f: iomem range 0x0-0x9ffff could not be reserved > system 00:0f: iomem range 0xc0000-0xcffff has been reserved > system 00:0f: iomem range 0xe0000-0xfffff could not be reserved > system 00:0f: iomem range 0x100000-0xdfffffff could not be reserved > system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:05.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:07:00.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:07:02.0 > IO window: e000-efff > MEM window: 0xfdf00000-0xfdffffff > PREFETCH window: disabled. > PCI: Bridge: 0000:05:00.0 > IO window: e000-efff > MEM window: 0xfdf00000-0xfebfffff > PREFETCH window: disabled. > PCI: Bridge: 0000:05:00.3 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:09.0 > IO window: e000-efff > MEM window: 0xfde00000-0xfebfffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.2 > IO window: d000-dfff > MEM window: 0xfdd00000-0xfddfffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.3 > IO window: c000-cfff > MEM window: 0xfdc00000-0xfdcfffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: b000-bfff > MEM window: 0xfdb00000-0xfdbfffff > PREFETCH window: 0x00000000f8000000-0x00000000fbffffff > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 48 (level, low) -> IRQ 48 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 52 (level, low) -> IRQ 52 > PCI: Setting latency timer of device 0000:00:05.0 to 64 > ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 56 (level, low) -> IRQ 56 > PCI: Setting latency timer of device 0000:00:09.0 to 64 > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:05:00.0 to 64 > PCI: Setting latency timer of device 0000:07:00.0 to 64 > PCI: Setting latency timer of device 0000:07:02.0 to 64 > PCI: Setting latency timer of device 0000:05:00.3 to 64 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1c.3 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) > TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) > TCP: Hash tables configured (established 524288 bind 65536) > TCP reno registered > checking if image is initramfs... it is > Freeing initrd memory: 3253k freed > audit: initializing netlink socket (disabled) > type=2000 audit(1214756782.001:1): initialized > krcupreemptd setsched 0 > prio = 98 > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > SELinux: Registering netfilter hooks > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:01:02.0: Boot video device > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > Allocate Port Service[0000:00:01.0:pcie01] > PCI: Setting latency timer of device 0000:00:05.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:05.0:pcie00] > Allocate Port Service[0000:00:05.0:pcie01] > PCI: Setting latency timer of device 0000:00:09.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:09.0:pcie00] > Allocate Port Service[0000:00:09.0:pcie01] > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > Allocate Port Service[0000:00:1c.0:pcie03] > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.2:pcie00] > Allocate Port Service[0000:00:1c.2:pcie02] > Allocate Port Service[0000:00:1c.2:pcie03] > PCI: Setting latency timer of device 0000:00:1c.3 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.3:pcie00] > Allocate Port Service[0000:00:1c.3:pcie02] > Allocate Port Service[0000:00:1c.3:pcie03] > PCI: Setting latency timer of device 0000:05:00.0 to 64 > Allocate Port Service[0000:05:00.0:pcie11] > PCI: Setting latency timer of device 0000:07:00.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:07:00.0:pcie21] > PCI: Setting latency timer of device 0000:07:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:07:02.0:pcie21] > AER service couldn't init device 0000:00:01.0:pcie01 - no _OSC support > AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support > AER service couldn't init device 0000:00:09.0:pcie01 - no _OSC support > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > ACPI: SSDT DFFBE0C0, 01F3 (r1 DpgPmm P001Ist 11 INTL 20051117) > ACPI: ACPI0007:00 is registered as cooling_device0 > ACPI: Processor [P001] (supports 8 throttling states) > ACPI: SSDT DFFBE550, 01F3 (r1 DpgPmm P002Ist 12 INTL 20051117) > ACPI: ACPI0007:01 is registered as cooling_device1 > ACPI: SSDT DFFBE9E0, 01F3 (r1 DpgPmm P003Ist 12 INTL 20051117) > ACPI: ACPI0007:02 is registered as cooling_device2 > ACPI: SSDT DFFBEE70, 01F3 (r1 DpgPmm P004Ist 12 INTL 20051117) > ACPI: ACPI0007:03 is registered as cooling_device3 > ACPI: SSDT DFFBF300, 01F3 (r1 DpgPmm P005Ist 12 INTL 20051117) > ACPI: ACPI0007:04 is registered as cooling_device4 > ACPI: SSDT DFFBF790, 01F3 (r1 DpgPmm P006Ist 12 INTL 20051117) > ACPI: ACPI0007:05 is registered as cooling_device5 > ACPI: SSDT DFFBFC20, 01F3 (r1 DpgPmm P007Ist 12 INTL 20051117) > ACPI: ACPI0007:06 is registered as cooling_device6 > ACPI: SSDT DFFC00B0, 01F3 (r1 DpgPmm P008Ist 12 INTL 20051117) > ACPI: ACPI0007:07 is registered as cooling_device7 > Real Time Clock Driver v1.12ac > hpet_resources: 0xfed00000 is busy > Non-volatile memory driver v1.2 > Linux agpgart interface v0.103 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > brd: module loaded > input: Macintosh mouse button emulation as /class/input/input0 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as /class/input/input1 > cpuidle: using governor ladder > cpuidle: using governor menu > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > /home/nwatkins/linux-2.6.25.8/drivers/hid/usbhid/hid-core.c: v2.6:USB > HID core driver > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > registered taskstats version 1 > Freeing unused kernel memory: 376k freed > Write protecting the kernel read-only data: 1152k > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > BUG: swapper:1 task might have lost a preemption check! > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __atomic_notifier_call_chain+0x3c/0x48 > [] notify_write+0x20/0x25 > [] vt_console_print+0x1e3/0x293 > [] __call_console_drivers+0xa8/0xcd > [] release_console_sem+0x11f/0x1b6 > [] vprintk+0x327/0x364 > [] printk+0x4e/0x56 > [] printk+0x4e/0x56 > [] dump_trace+0x25f/0x2ae > [] show_trace+0x53/0x61 > [] dump_stack+0x69/0x6f > [] __printk_ratelimit+0x6d/0xa6 > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __atomic_notifier_call_chain+0x3c/0x48 > [] notify_write+0x20/0x25 > [] vt_console_print+0x1e3/0x293 > [] __call_console_drivers+0xa8/0xcd > [] release_console_sem+0x11f/0x1b6 > [] vprintk+0x327/0x364 > [] printk+0x4e/0x56 > [] printk+0x4e/0x56 > [] dump_trace+0x25f/0x2ae > [] show_trace+0x53/0x61 > [] dump_stack+0x69/0x6f > [] __printk_ratelimit+0x6d/0xa6 > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __atomic_notifier_call_chain+0x3c/0x48 > [] notify_write+0x20/0x25 > [] vt_console_print+0x1e3/0x293 > [] __call_console_drivers+0xa8/0xcd > [] release_console_sem+0x11f/0x1b6 > [] vprintk+0x327/0x364 > [] printk+0x4e/0x56 > [] printk+0x4e/0x56 > [] dump_trace+0x25f/0x2ae > [] show_trace+0x53/0x61 > [] dump_stack+0x69/0x6f > [] __printk_ratelimit+0x6d/0xa6 > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __atomic_notifier_call_chain+0x3c/0x48 > [] notify_write+0x20/0x25 > [] vt_console_print+0x1e3/0x293 > [] __call_console_drivers+0xa8/0xcd > [] release_console_sem+0x11f/0x1b6 > [] vprintk+0x327/0x364 > [] printk+0x4e/0x56 > [] printk+0x4e/0x56 > [] dump_trace+0x25f/0x2ae > [] show_trace+0x53/0x61 > [] dump_stack+0x69/0x6f > [] __printk_ratelimit+0x6d/0xa6 > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __atomic_notifier_call_chain+0x3c/0x48 > [] notify_write+0x20/0x25 > [] vt_console_print+0x1e3/0x293 > [] __call_console_drivers+0xa8/0xcd > [] release_console_sem+0x11f/0x1b6 > [] vprintk+0x327/0x364 > [] printk+0x4e/0x56 > [] printk+0x4e/0x56 > [] dump_trace+0x25f/0x2ae > [] show_trace+0x53/0x61 > [] dump_stack+0x69/0x6f > [] __printk_ratelimit+0x6d/0xa6 > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __atomic_notifier_call_chain+0x3c/0x48 > [] notify_write+0x20/0x25 > [] vt_console_print+0x1e3/0x293 > [] __call_console_drivers+0xa8/0xcd > [] release_console_sem+0x11f/0x1b6 > [] vprintk+0x327/0x364 > [] printk+0x4e/0x56 > [] printk+0x4e/0x56 > [] dump_trace+0x25f/0x2ae > [] show_trace+0x53/0x61 > [] dump_stack+0x69/0x6f > [] __printk_ratelimit+0x6d/0xa6 > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __atomic_notifier_call_chain+0x3c/0x48 > [] notify_write+0x20/0x25 > [] vt_console_print+0x1e3/0x293 > [] __call_console_drivers+0xa8/0xcd > [] release_console_sem+0x11f/0x1b6 > [] vprintk+0x327/0x364 > [] printk+0x4e/0x56 > [] printk+0x4e/0x56 > [] dump_trace+0x25f/0x2ae > [] show_trace+0x53/0x61 > [] dump_stack+0x69/0x6f > [] __printk_ratelimit+0x6d/0xa6 > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __atomic_notifier_call_chain+0x3c/0x48 > [] notify_write+0x20/0x25 > [] vt_console_print+0x1e3/0x293 > [] __call_console_drivers+0xa8/0xcd > [] release_console_sem+0x11f/0x1b6 > [] vprintk+0x327/0x364 > [] printk+0x4e/0x56 > [] printk+0x4e/0x56 > [] dump_trace+0x25f/0x2ae > [] show_trace+0x53/0x61 > [] dump_stack+0x69/0x6f > [] __printk_ratelimit+0x6d/0xa6 > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > Pid: 1, comm: swapper Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] preempt_enable_no_resched+0x57/0x5f > [] debug_smp_processor_id+0xb2/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] avc_has_perm_noaudit+0x39d/0x455 > [] do_try_to_take_rt_mutex+0x165/0x193 > [] avc_has_perm+0x2b/0x5b > [] inode_has_perm+0x65/0x72 > [] __link_path_walk+0x146/0xdb8 > [] __inc_zone_state+0x6a/0x88 > [] __rt_spin_lock+0x27/0x66 > [] path_walk+0x5d/0xb8 > [] do_path_lookup+0x17e/0x1f5 > [] __path_lookup_intent_open+0x56/0x97 > [] open_namei+0x7d/0x681 > [] __smp_call_function_mask+0x86/0xbb > [] __cpa_flush_range+0x0/0x14 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] init_post+0x35/0xfa > [] __spin_unlock+0x10/0x2b > [] finish_task_switch+0x32/0xe4 > [] child_rip+0xa/0x12 > [] child_rip+0x0/0x12 > > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdaff800 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > SCSI subsystem initialized > Driver 'sd' needs updating - please use bus_type methods > libata version 3.00 loaded. > ahci 0000:00:1f.2: version 3.0 > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 > input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdaffd00 irq 19 > ata2: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdaffd80 irq 19 > ata3: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdaffe00 irq 19 > ata4: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdaffe80 irq 19 > ata5: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdafff00 irq 19 > ata6: SATA max UDMA/133 abar m1024@0xfdaffc00 port 0xfdafff80 irq 19 > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-7: WDC WD800JD-00MSA1, 10.01E01, max UDMA/133 > ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) > ata1.00: configured for UDMA/133 > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata2.00: ATAPI: Optiarc DVD RW AD-7190S, 1.01, max UDMA/100 > ata2.00: configured for UDMA/100 > ata3: SATA link down (SStatus 0 SControl 300) > ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata4.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133 > ata4.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) > ata4.00: configured for UDMA/133 > ata5: SATA link down (SStatus 0 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > printk: 6969 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: insmod/676 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 676, comm: insmod Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] cfq_cic_lookup+0x4d/0xe3 > [] cfq_set_request+0x7b/0x31c > [] get_request+0x1a3/0x2d0 > [] get_request_wait+0x28/0x16e > [] kmem_cache_alloc_node+0x129/0x152 > [] :scsi_mod:scsi_execute+0x34/0xe6 > [] :scsi_mod:scsi_execute_req+0xb9/0xde > [] :scsi_mod:scsi_probe_and_add_lun+0x241/0xa9d > [] klist_add_tail+0x35/0x41 > [] kobject_get+0x12/0x17 > [] :scsi_mod:scsi_alloc_target+0x255/0x335 > [] :scsi_mod:__scsi_add_device+0xab/0xe3 > [] :libata:ata_scsi_scan_host+0xa8/0x272 > [] :libata:ata_host_register+0x23f/0x265 > [] :libata:ata_host_activate+0xb5/0xd8 > [] :ahci:ahci_init_one+0x989/0x9c0 > [] pci_device_probe+0xb3/0xfd > [] driver_probe_device+0xd9/0x156 > [] __driver_attach+0x46/0x6d > [] __driver_attach+0x0/0x6d > [] bus_for_each_dev+0x47/0x72 > [] kmem_cache_alloc+0x100/0x127 > [] bus_add_driver+0xb7/0x208 > [] driver_register+0x59/0xcd > [] __pci_register_driver+0x57/0x8b > [] sys_init_module+0x9b/0x196 > [] system_call_after_swapgs+0x7b/0x80 > > scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-00MS 10.0 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 > sd 0:0:0:0: [sda] Attached SCSI disk > scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7190S 1.01 PQ: 0 ANSI: 5 > scsi 3:0:0:0: Direct-Access ATA ST380811AS 3.AA PQ: 0 ANSI: 5 > sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) > sd 3:0:0:0: [sdb] Write Protect is off > sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) > sd 3:0:0:0: [sdb] Write Protect is off > sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sdb: sdb1 sdb2 sdb3 > sd 3:0:0:0: [sdb] Attached SCSI disk > printk: 465 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: init/1 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1, comm: init Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] __fput+0x122/0x18e > [] filp_close+0x5d/0x65 > [] sys_close+0x89/0xcb > [] system_call_after_swapgs+0x7b/0x80 > > ata_piix 0000:00:1f.1: version 2.12 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1f.1 to 64 > scsi6 : ata_piix > scsi7 : ata_piix > ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 > ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: Disabled at runtime. > SELinux: Unregistering netfilter hooks > printk: 22393 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: rhgb-client/765 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 765, comm: rhgb-client Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] find_get_page+0x172/0x182 > [] __lock_page+0xc1/0xc6 > [] find_lock_page+0x15/0x61 > [] filemap_fault+0x75/0x3a2 > [] __do_fault+0x63/0x3f6 > [] handle_mm_fault+0x37c/0x797 > [] __spin_unlock+0x10/0x2b > [] do_page_fault+0x3f7/0x7b2 > [] error_exit+0x0/0x51 > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > scsi 1:0:0:0: Attached scsi generic sg1 type 5 > sd 3:0:0:0: Attached scsi generic sg2 type 0 > Driver 'sr' needs updating - please use bus_type methods > sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > input: PC Speaker as /class/input/input3 > iTCO_vendor_support: vendor-support=0 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) > iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > input: Power Button (FF) as /class/input/input4 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /class/input/input5 > ACPI: Power Button (CM) [PWRB] > ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 > intel_rng: FWH not detected > e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 > e1000e: Copyright (c) 1999-2007 Intel Corporation. > ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:08:00.0 to 64 > eth0: (PCI Express:2.5GB/s:Width x4) 00:1f:c6:e3:40:52 > eth0: Intel(R) PRO/1000 Network Connection > eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff > ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:08:00.1 to 64 > eth1: (PCI Express:2.5GB/s:Width x4) 00:1f:c6:e3:40:53 > eth1: Intel(R) PRO/1000 Network Connection > eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > eth2: (PCI Express:2.5GB/s:Width x1) 00:1f:c6:e3:41:4c > eth2: Intel(R) PRO/1000 Network Connection > eth2: MAC: 2, PHY: 2, PBA No: ffffff-0ff > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > eth3: (PCI Express:2.5GB/s:Width x1) 00:1f:c6:e3:40:f5 > eth3: Intel(R) PRO/1000 Network Connection > eth3: MAC: 2, PHY: 2, PBA No: ffffff-0ff > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com > device-mapper: multipath: version 1.0.5 loaded > printk: 258804 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: fsck/1699 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 1699, comm: fsck Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] find_get_page+0x172/0x182 > [] file_read_actor+0x56/0x12e > [] file_read_actor+0xab/0x12e > [] generic_file_aio_read+0x1b0/0x4cf > [] do_sync_read+0xc9/0x10c > [] __alloc_pages+0x84/0x31a > [] autoremove_wake_function+0x0/0x2e > [] __spin_unlock+0x10/0x2b > [] vfs_read+0xaa/0x152 > [] sys_read+0x48/0x74 > [] system_call_after_swapgs+0x7b/0x80 > > EXT3 FS on sdb2, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sdb1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 522104k swap on /dev/sdb3. Priority:-1 extents:1 across:522104k > IA-32 Microcode Update Driver: v1.14a > warning: process `kudzu' used the deprecated sysctl system call with 1.23. > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ADDRCONF(NETDEV_UP): eth0: link is not ready > printk: 135272 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: usleep/2171 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 2171, comm: usleep Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] find_get_page+0x172/0x182 > [] find_lock_page+0x15/0x61 > [] filemap_fault+0x75/0x3a2 > [] __do_fault+0x63/0x3f6 > [] lock_hrtimer_base+0x1b/0x3c > [] handle_mm_fault+0x37c/0x797 > [] __spin_unlock+0x10/0x2b > [] do_page_fault+0x3f7/0x7b2 > [] do_nanosleep+0x41/0x9c > [] error_exit+0x0/0x51 > > eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > fuse init (API version 7.9) > printk: 165330 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: rsyslogd/2593 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 2593, comm: rsyslogd Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] fget_light+0x94/0x9c > [] sys_write+0x21/0x74 > [] tracesys+0x71/0xe1 > [] tracesys+0xdc/0xe1 > > warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) > Bluetooth: Core ver 2.11 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.9 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > printk: 115847 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: yum-updatesd/2886 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 2886, comm: yum-updatesd Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] find_get_page+0x172/0x182 > [] __lock_page_killable+0xc1/0xc6 > [] file_read_actor+0xab/0x12e > [] generic_file_aio_read+0x1b0/0x4cf > [] do_sync_read+0xc9/0x10c > [] autoremove_wake_function+0x0/0x2e > [] vfs_read+0xaa/0x152 > [] sys_read+0x48/0x74 > [] tracesys+0xdc/0xe1 > > eth0: no IPv6 routers present > printk: 113284 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: gam_server/2959 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 2959, comm: gam_server Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] put_filp+0x1c/0x44 > [] __path_lookup_intent_open+0x87/0x97 > [] open_namei+0x7d/0x681 > [] do_filp_open+0x1c/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] tracesys+0xdc/0xe1 > > printk: 72709 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: pwunconv/3081 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 3081, comm: pwunconv Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] file_move+0x1c/0xa6 > [] __dentry_open+0xf9/0x204 > [] do_filp_open+0x2a/0x38 > [] get_unused_fd_flags+0x111/0x11f > [] do_sys_open+0x46/0xc3 > [] tracesys+0xdc/0xe1 > > printk: 37677 messages suppressed. > BUG: using smp_processor_id() in preemptible [00000000] code: sshd/3097 > caller is __rcu_preempt_unboost+0x1f/0xee > Pid: 3097, comm: sshd Not tainted 2.6.25.8-rt7 #1 > > Call Trace: > [] debug_smp_processor_id+0xad/0xb8 > [] __rcu_preempt_unboost+0x1f/0xee > [] core_sys_select+0x56/0x270 > [] do_sync_read+0xc9/0x10c > [] autoremove_wake_function+0x0/0x2e > [] current_fs_time+0x1e/0x24 > [] sys_select+0xba/0x182 > [] tracesys+0xdc/0xe1 > -- > To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/