Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1764734AbYF3Vrh (ORCPT ); Mon, 30 Jun 2008 17:47:37 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932666AbYF3VlT (ORCPT ); Mon, 30 Jun 2008 17:41:19 -0400 Received: from aeryn.fluff.org.uk ([87.194.8.8]:50415 "EHLO kira.home.fluff.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S933465AbYF3VlL (ORCPT ); Mon, 30 Jun 2008 17:41:11 -0400 Message-Id: <20080630214109.845271182@fluff.org.uk> References: <20080630214023.140288591@fluff.org.uk> User-Agent: quilt/0.46-1 Date: Mon, 30 Jun 2008 22:40:29 +0100 From: ben@fluff.org.uk To: linux-kernel@vger.kernel.org, drzeus-mmc@drzeus.cx Cc: laforge@openmoko.org, tk@maintech.de, Ben Dooks Subject: [patch v5 06/16] MMC: S3C24XX: Add platform data for MMC/SD driver Content-Disposition: inline; filename=thirdparty/openmoko-mci/s3c_mci_platform.patch Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5411 Lines: 163 This patch adds platform data support to the s3mci driver. This allows flexible board-specific configuration of set_power, card detect and read only pins. Signed-off-by: Ben Dooks Index: linux-2.6.26-rc8-next20080627/drivers/mmc/host/s3cmci.c =================================================================== --- linux-2.6.26-rc8-next20080627.orig/drivers/mmc/host/s3cmci.c 2008-06-30 12:31:15.000000000 +0100 +++ linux-2.6.26-rc8-next20080627/drivers/mmc/host/s3cmci.c 2008-06-30 12:31:46.000000000 +0100 @@ -21,6 +21,8 @@ #include #include +#include + #include "s3cmci.h" #define DRIVER_NAME "s3c-mci" @@ -1011,6 +1013,9 @@ static void s3cmci_set_ios(struct mmc_ho s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + if (!host->is2440) mci_con |= S3C2410_SDICON_FIFORESET; @@ -1024,6 +1029,9 @@ static void s3cmci_set_ios(struct mmc_ho if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + break; } @@ -1072,9 +1080,25 @@ static void s3cmci_reset(struct s3cmci_h writel(con, host->base + S3C2410_SDICON); } +static int s3cmci_get_ro(struct mmc_host *mmc) +{ + struct s3cmci_host *host = mmc_priv(mmc); + + if (host->pdata->gpio_wprotect == 0) + return 0; + + return s3c2410_gpio_getpin(host->pdata->gpio_wprotect); +} + static struct mmc_host_ops s3cmci_ops = { .request = s3cmci_request, .set_ios = s3cmci_set_ios, + .get_ro = s3cmci_get_ro, +}; + +static struct s3c24xx_mci_pdata s3cmci_def_pdata = { + /* This is currently here to avoid a number of if (host->pdata) + * checks. Any zero fields to ensure reaonable defaults are picked. */ }; static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) @@ -1094,6 +1118,12 @@ static int __devinit s3cmci_probe(struct host->pdev = pdev; host->is2440 = is2440; + host->pdata = pdev->dev.platform_data; + if (!host->pdata) { + pdev->dev.platform_data = &s3cmci_def_pdata; + host->pdata = &s3cmci_def_pdata; + } + spin_lock_init(&host->complete_lock); tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); @@ -1112,7 +1142,8 @@ static int __devinit s3cmci_probe(struct host->pio_active = XFER_NONE; host->dma = S3CMCI_DMA; - host->irq_cd = IRQ_EINT2; + host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); + s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { @@ -1158,7 +1189,7 @@ static int __devinit s3cmci_probe(struct disable_irq(host->irq); - s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2); + s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); set_irq_type(host->irq_cd, IRQT_BOTHEDGE); if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) { @@ -1168,6 +1199,10 @@ static int __devinit s3cmci_probe(struct goto probe_free_irq; } + if (host->pdata->gpio_wprotect) + s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, + S3C2410_GPIO_INPUT); + if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) { dev_err(&pdev->dev, "unable to get DMA channel.\n"); ret = -EBUSY; @@ -1191,11 +1226,14 @@ static int __devinit s3cmci_probe(struct host->clk_rate = clk_get_rate(host->clk); mmc->ops = &s3cmci_ops; - mmc->ocr_avail = MMC_VDD_32_33; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; mmc->caps = MMC_CAP_4_BIT_DATA; mmc->f_min = host->clk_rate / (host->clk_div * 256); mmc->f_max = host->clk_rate / host->clk_div; + if (host->pdata->ocr_avail) + mmc->ocr_avail = host->pdata->ocr_avail; + mmc->max_blk_count = 4095; mmc->max_blk_size = 4095; mmc->max_req_size = 4095 * 512; Index: linux-2.6.26-rc8-next20080627/drivers/mmc/host/s3cmci.h =================================================================== --- linux-2.6.26-rc8-next20080627.orig/drivers/mmc/host/s3cmci.h 2008-06-30 12:31:15.000000000 +0100 +++ linux-2.6.26-rc8-next20080627/drivers/mmc/host/s3cmci.h 2008-06-30 12:31:37.000000000 +0100 @@ -22,6 +22,7 @@ enum s3cmci_waitfor { struct s3cmci_host { struct platform_device *pdev; + struct s3c24xx_mci_pdata *pdata; struct mmc_host *mmc; struct resource *mem; struct clk *clk; Index: linux-2.6.26-rc8-next20080627/include/asm-arm/plat-s3c24xx/mci.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.26-rc8-next20080627/include/asm-arm/plat-s3c24xx/mci.h 2008-06-30 12:31:37.000000000 +0100 @@ -0,0 +1,12 @@ +#ifndef _ARCH_MCI_H +#define _ARCH_MCI_H + +struct s3c24xx_mci_pdata { + unsigned int gpio_detect; + unsigned int gpio_wprotect; + unsigned long ocr_avail; + void (*set_power)(unsigned char power_mode, + unsigned short vdd); +}; + +#endif /* _ARCH_NCI_H */ -- Ben (ben@fluff.org, http://www.fluff.org/) 'a smiley only costs 4 bytes' -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/