Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753489AbYGET2x (ORCPT ); Sat, 5 Jul 2008 15:28:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752393AbYGET2l (ORCPT ); Sat, 5 Jul 2008 15:28:41 -0400 Received: from lucidpixels.com ([75.144.35.66]:53175 "EHLO lucidpixels.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752193AbYGET2g (ORCPT ); Sat, 5 Jul 2008 15:28:36 -0400 Date: Sat, 5 Jul 2008 15:28:34 -0400 (EDT) From: Justin Piszcz To: Robert Hancock cc: linux-kernel@vger.kernel.org, linux-raid@vger.kernel.org, linux-ide@vger.kernel.org, xfs@oss.sgi.com, Alan Piszcz Subject: Re: Lots of con-current I/O = resets SATA link? (2.6.25.10) In-Reply-To: <486FBFAB.5050303@shaw.ca> Message-ID: References: <486FBFAB.5050303@shaw.ca> User-Agent: Alpine 1.10 (DEB 962 2008-03-14) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 61573 Lines: 998 On Sat, 5 Jul 2008, Robert Hancock wrote: > Justin Piszcz wrote: >> I've read the best way to 'deal' with this issue is to turn off apic/acpi >> etc, is there any downside to turning them off? Particularly APIC for IRQ >> routing? > > It's not the best way to deal with it, more just a workaround, and if it does > help it should be reported because it indicates something else is wrong. The > main downsides to disabling APIC is that all interrupts will be handled by > one core and you'll end up with much more IRQ sharing. Disabling ACPI on > modern systems tends to be a bad idea, you'll get no multi-core support, for > one. > >> [115787.446158] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [115788.133592] ata6.00: configured for UDMA/133 >> [115788.133628] ata6: EH complete >> [115787.877547] sd 5:0:0:0: [sdf] 586072368 512-byte hardware sectors >> (300069 MB) >> [115787.877689] sd 5:0:0:0: [sdf] Write Protect is off >> [115787.877692] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 >> [115787.878746] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: >> enabled, doesn't support DPO or FUA >> >> What is the true cause of this, is there anyway to get more information? >> >> I will test soon with apic/acpi=off. > > Can you post your dmesg from bootup with the controller/drive detection? Below: [ 0.000000] Linux version 2.6.25.10 (root@p34.internal.lan) (gcc version 4.3.1 (Debian 4.3.1-2) ) #1 SMP Thu Jul 3 04:57:42 EDT 2008 [ 0.000000] Command line: auto BOOT_IMAGE=2.6.25.10-1 ro root=902 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable) [ 0.000000] BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved) [ 0.000000] BIOS-e820: 00000000cf59c000 - 00000000cf639000 (usable) [ 0.000000] BIOS-e820: 00000000cf639000 - 00000000cf694000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf694000 - 00000000cf697000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf697000 - 00000000cf6ef000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable) [ 0.000000] BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) [ 0.000000] BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 849295) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 849308, 849465) 2 entries of 256 used [ 0.000000] Entering add_active_range(0, 849649, 849650) 3 entries of 256 used [ 0.000000] Entering add_active_range(0, 849663, 849664) 4 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 2277376) 5 entries of 256 used [ 0.000000] end_pfn_map = 2277376 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) [ 0.000000] ACPI: RSDT CF6FD038, 0050 (r1 INTEL DG965WH 6CA 1000013) [ 0.000000] ACPI: FACP CF6FC000, 0074 (r1 INTEL DG965WH 6CA MSFT 1000013) [ 0.000000] ACPI: DSDT CF6F7000, 442C (r1 INTEL DG965WH 6CA MSFT 1000013) [ 0.000000] ACPI: FACS CF697000, 0040 [ 0.000000] ACPI: APIC CF6F6000, 0078 (r1 INTEL DG965WH 6CA MSFT 1000013) [ 0.000000] ACPI: WDDT CF6F5000, 0040 (r1 INTEL DG965WH 6CA MSFT 1000013) [ 0.000000] ACPI: MCFG CF6F4000, 003C (r1 INTEL DG965WH 6CA MSFT 1000013) [ 0.000000] ACPI: ASF! CF6F3000, 00A6 (r32 INTEL DG965WH 6CA MSFT 1000013) [ 0.000000] ACPI: HPET CF6F2000, 0038 (r1 INTEL DG965WH 6CA MSFT 1000013) [ 0.000000] ACPI: SSDT CF6F0000, 020C (r1 INTEL CpuPm 6CA MSFT 1000013) [ 0.000000] ACPI: SSDT CF6EF000, 0175 (r1 INTEL Cpu0Ist 6CA MSFT 1000013) [ 0.000000] ACPI: SSDT CF696000, 0175 (r1 INTEL Cpu1Ist 6CA MSFT 1000013) [ 0.000000] ACPI: SSDT CF695000, 0175 (r1 INTEL Cpu2Ist 6CA MSFT 1000013) [ 0.000000] ACPI: SSDT CF694000, 0175 (r1 INTEL Cpu3Ist 6CA MSFT 1000013) [ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 849295) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 849308, 849465) 2 entries of 256 used [ 0.000000] Entering add_active_range(0, 849649, 849650) 3 entries of 256 used [ 0.000000] Entering add_active_range(0, 849663, 849664) 4 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 2277376) 5 entries of 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE [ 0.000000] early res: 2 [200000-7c93a7] TEXT DATA BSS [ 0.000000] early res: 3 [9a400-a03ff] EBDA [ 0.000000] early res: 4 [8000-11fff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ 0.000000] [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0 [ 0.000000] [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0 [ 0.000000] [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0 [ 0.000000] [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0 [ 0.000000] [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0 [ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0 [ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0 [ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0 [ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0 [ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0 [ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0 [ 0.000000] [ffffe20004400000-ffffe200045fffff] PMD ->ffff810009a00000 on node 0 [ 0.000000] [ffffe20004600000-ffffe200047fffff] PMD ->ffff810009e00000 on node 0 [ 0.000000] [ffffe20004800000-ffffe200049fffff] PMD ->ffff81000a200000 on node 0 [ 0.000000] [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff81000a600000 on node 0 [ 0.000000] [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff81000aa00000 on node 0 [ 0.000000] [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff81000ae00000 on node 0 [ 0.000000] [ffffe20005000000-ffffe200051fffff] PMD ->ffff81000b200000 on node 0 [ 0.000000] [ffffe20005200000-ffffe200053fffff] PMD ->ffff81000b600000 on node 0 [ 0.000000] [ffffe20005400000-ffffe200055fffff] PMD ->ffff81000ba00000 on node 0 [ 0.000000] [ffffe20005600000-ffffe200057fffff] PMD ->ffff81000be00000 on node 0 [ 0.000000] [ffffe20005800000-ffffe200059fffff] PMD ->ffff81000c200000 on node 0 [ 0.000000] [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000c600000 on node 0 [ 0.000000] [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff81000ca00000 on node 0 [ 0.000000] [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff81000ce00000 on node 0 [ 0.000000] [ffffe20006000000-ffffe200061fffff] PMD ->ffff81000d200000 on node 0 [ 0.000000] [ffffe20006200000-ffffe200063fffff] PMD ->ffff81000d600000 on node 0 [ 0.000000] [ffffe20006400000-ffffe200065fffff] PMD ->ffff81000da00000 on node 0 [ 0.000000] [ffffe20006600000-ffffe200067fffff] PMD ->ffff81000de00000 on node 0 [ 0.000000] [ffffe20006800000-ffffe200069fffff] PMD ->ffff81000e200000 on node 0 [ 0.000000] [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000e600000 on node 0 [ 0.000000] [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000ea00000 on node 0 [ 0.000000] [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000ee00000 on node 0 [ 0.000000] [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000f200000 on node 0 [ 0.000000] [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000f600000 on node 0 [ 0.000000] [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000fa00000 on node 0 [ 0.000000] [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000fe00000 on node 0 [ 0.000000] [ffffe20007800000-ffffe200079fffff] PMD ->ffff810010200000 on node 0 [ 0.000000] [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff810010600000 on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 2277376 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0 -> 143 [ 0.000000] 0: 256 -> 849295 [ 0.000000] 0: 849308 -> 849465 [ 0.000000] 0: 849649 -> 849650 [ 0.000000] 0: 849663 -> 849664 [ 0.000000] 0: 1048576 -> 2277376 [ 0.000000] On node 0 totalpages: 2078141 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1502 pages reserved [ 0.000000] DMA zone: 2425 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 831078 pages, LIFO batch:31 [ 0.000000] Normal zone: 16800 pages used for memmap [ 0.000000] Normal zone: 1212000 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] Processor #2 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] Processor #3 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at d2000000 (gap: d0000000:20000000) [ 0.000000] PERCPU: Allocating 21960 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045503 [ 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.25.10-1 ro root=902 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000001] time.c: Detected 2397.601 MHz processor. [ 0.000017] Console: colour dummy device 80x25 [ 0.000020] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000999] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000999] Checking aperture... [ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000999] Placing software IO TLB between 0x11433000 - 0x15433000 [ 0.000999] Memory: 8100044k/9109504k available (3999k kernel code, 211796k reserved, 1251k data, 256k init) [ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.000999] hpet clockevent registered [ 0.059992] Calibrating delay using timer specific routine.. 4797.82 BogoMIPS (lpj=2398913) [ 0.060037] Mount-cache hash table entries: 256 [ 0.060140] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.060143] CPU: L2 cache: 4096K [ 0.060146] CPU: Physical Processor ID: 0 [ 0.060148] CPU: Processor Core ID: 0 [ 0.060155] CPU0: Thermal monitoring enabled (TM2) [ 0.060157] using mwait in idle threads. [ 0.060165] Freeing SMP alternatives: 35k freed [ 0.060183] ACPI: Core revision 20070126 [ 0.077084] Using local APIC timer interrupts. [ 0.077989] APIC timer calibration result 16649993 [ 0.077990] Detected 16.649 MHz APIC timer. [ 0.078079] Booting processor 1/4 APIC 0x2 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4794.99 BogoMIPS (lpj=2397499) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 2 [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.149473] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.150050] Booting processor 2/4 APIC 0x1 [ 0.000999] Initializing CPU#2 [ 0.000999] Calibrating delay using timer specific routine.. 4795.02 BogoMIPS (lpj=2397514) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] CPU2: Thermal monitoring enabled (TM2) [ 0.000999] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.221461] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.222057] Booting processor 3/4 APIC 0x3 [ 0.000999] Initializing CPU#3 [ 0.000999] Calibrating delay using timer specific routine.. 4794.98 BogoMIPS (lpj=2397491) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 3 [ 0.000999] CPU3: Thermal monitoring enabled (TM2) [ 0.000999] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.293467] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.293961] Brought up 4 CPUs [ 0.294306] net_namespace: 880 bytes [ 0.294415] xor: automatically using best checksumming function: generic_sse [ 0.298955] generic_sse: 8536.000 MB/sec [ 0.298957] xor: using function: generic_sse (8536.000 MB/sec) [ 0.299014] NET: Registered protocol family 16 [ 0.299181] No dock devices found. [ 0.299286] ACPI: bus type pci registered [ 0.303042] PCI: Using MMCONFIG at f0000000 - f7ffffff [ 0.303044] PCI: Using configuration type 1 [ 0.306292] ACPI: EC: Look up EC in DSDT [ 0.308191] ACPI: Interpreter enabled [ 0.308194] ACPI: (supports S0 S5) [ 0.308211] ACPI: Using IOAPIC for interrupt routing [ 0.312322] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.313000] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.313005] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.313823] PCI: Transparent bridge - 0000:00:1e.0 [ 0.313853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.314182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.314416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.314506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.314596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.314685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.314774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.319373] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.319459] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.319555] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.319639] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.319722] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) [ 0.319804] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.319887] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) [ 0.319951] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.320223] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.320284] pnp: PnP ACPI init [ 0.320293] ACPI: bus type pnp registered [ 0.323494] pnp: PnP ACPI: found 11 devices [ 0.323498] ACPI: ACPI bus type pnp unregistered [ 0.323753] SCSI subsystem initialized [ 0.323851] libata version 3.00 loaded. [ 0.323950] usbcore: registered new interface driver usbfs [ 0.323960] usbcore: registered new interface driver hub [ 0.324020] usbcore: registered new device driver usb [ 0.324274] PCI: Using ACPI for IRQ routing [ 0.324277] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.328963] PCI-GART: No AMD northbridge found. [ 0.328970] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.328976] hpet0: 3 64-bit timers, 14318180 Hz [ 0.332963] system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved [ 0.332969] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 0.332974] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.332978] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.332983] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.332987] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.332991] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.332996] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 0.333000] system 00:01: iomem range 0xc0000-0xdffff has been reserved [ 0.333004] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 0.333014] system 00:06: ioport range 0x500-0x53f has been reserved [ 0.333018] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.333022] system 00:06: ioport range 0x360-0x361 has been reserved [ 0.333026] system 00:06: ioport range 0x680-0x6ff has been reserved [ 0.333686] PCI: Bridge: 0000:00:1c.0 [ 0.333689] IO window: disabled. [ 0.333693] MEM window: disabled. [ 0.333696] PREFETCH window: disabled. [ 0.333701] PCI: Bridge: 0000:00:1c.1 [ 0.333703] IO window: 5000-5fff [ 0.333708] MEM window: 0xe0400000-0xe04fffff [ 0.333711] PREFETCH window: disabled. [ 0.333716] PCI: Bridge: 0000:00:1c.2 [ 0.333719] IO window: 4000-4fff [ 0.333723] MEM window: 0xe0300000-0xe03fffff [ 0.333727] PREFETCH window: 0x00000000e0700000-0x00000000e07fffff [ 0.333732] PCI: Bridge: 0000:00:1c.3 [ 0.333735] IO window: 3000-3fff [ 0.333739] MEM window: 0xe0200000-0xe02fffff [ 0.333742] PREFETCH window: 0x00000000e0800000-0x00000000e08fffff [ 0.333748] PCI: Bridge: 0000:00:1c.4 [ 0.333750] IO window: 2000-2fff [ 0.333754] MEM window: 0xe0100000-0xe01fffff [ 0.333758] PREFETCH window: 0x00000000e0900000-0x00000000e09fffff [ 0.333764] PCI: Bridge: 0000:00:1e.0 [ 0.333766] IO window: 1000-1fff [ 0.333770] MEM window: 0xe0000000-0xe00fffff [ 0.333774] PREFETCH window: 0x00000000e0a00000-0x00000000e0afffff [ 0.333794] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.333800] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.333814] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.333820] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.333833] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.333839] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.333872] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 0.333878] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.333891] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.333896] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.333904] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.333949] NET: Registered protocol family 2 [ 0.345005] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.345590] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.347184] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.347731] TCP: Hash tables configured (established 262144 bind 65536) [ 0.347735] TCP reno registered [ 0.056035] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.056134] SGI XFS with large block/inode numbers, no debug enabled [ 0.056622] async_tx: api initialized (sync-only) [ 0.056625] io scheduler noop registered [ 0.056649] io scheduler cfq registered (default) [ 0.056657] pci 0000:00:02.0: Boot video device [ 0.056993] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.057019] assign_interrupt_mode Found MSI capability [ 0.057048] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.057106] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.057152] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.057246] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.057276] assign_interrupt_mode Found MSI capability [ 0.057308] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.057348] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.057386] Allocate Port Service[0000:00:1c.1:pcie03] [ 0.057468] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.057498] assign_interrupt_mode Found MSI capability [ 0.057530] Allocate Port Service[0000:00:1c.2:pcie00] [ 0.057570] Allocate Port Service[0000:00:1c.2:pcie02] [ 0.057607] Allocate Port Service[0000:00:1c.2:pcie03] [ 0.057712] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.057737] assign_interrupt_mode Found MSI capability [ 0.057763] Allocate Port Service[0000:00:1c.3:pcie00] [ 0.057815] Allocate Port Service[0000:00:1c.3:pcie02] [ 0.057861] Allocate Port Service[0000:00:1c.3:pcie03] [ 0.057957] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.057986] assign_interrupt_mode Found MSI capability [ 0.057991] Allocate Port Service[0000:00:1c.4:pcie00] [ 0.057991] Allocate Port Service[0000:00:1c.4:pcie02] [ 0.058031] Allocate Port Service[0000:00:1c.4:pcie03] [ 0.058403] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20008100000, using 2560k, total 7616k [ 0.058407] vesafb: mode is 1280x1024x8, linelength=1280, pages=4 [ 0.058409] vesafb: scrolling: redraw [ 0.058412] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 0.069212] Console: switching to colour frame buffer device 160x64 [ 0.079909] fb0: VESA VGA frame buffer device [ 0.080054] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.080170] ACPI: Power Button (FF) [PWRF] [ 0.080298] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.080417] ACPI: Sleep Button (CM) [SLPB] [ 0.090085] Real Time Clock Driver v1.12ac [ 0.090232] hpet_resources: 0xfed00000 is busy [ 0.090273] Linux agpgart interface v0.103 [ 0.090341] agpgart: Detected an Intel 965G Chipset. [ 0.091700] agpgart: Detected 7676K stolen memory. [ 0.104465] agpgart: AGP aperture is 256M @ 0xd0000000 [ 0.104650] [drm] Initialized drm 1.1.0 20060810 [ 0.104735] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.104840] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.104982] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 0.105433] loop: module loaded [ 0.105552] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 0.105640] Copyright (c) 1999-2006 Intel Corporation. [ 0.105738] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 0.388945] Switched to high resolution mode on CPU 1 [ 0.208970] Switched to high resolution mode on CPU 3 [ 0.296959] Switched to high resolution mode on CPU 2 [ 0.500925] Switched to high resolution mode on CPU 0 [ 0.353439] e1000: 0000:06:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:29:37:db [ 0.379214] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 0.379323] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 0.641506] e1000: 0000:06:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:00:cd:b1 [ 0.789084] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 0.789212] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 [ 0.789288] e1000e: Copyright (c) 1999-2007 Intel Corporation. [ 0.789393] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 0.789502] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 0.889198] eth2: (PCI Express:2.5GB/s:Width x1) 00:19:d1:6e:9d:43 [ 0.889282] eth2: Intel(R) PRO/1000 Network Connection [ 0.889371] eth2: MAC: 4, PHY: 6, PBA No: ffffff-0ff [ 0.889485] console [netcon0] enabled [ 0.889555] netconsole: network logging started [ 0.889660] Driver 'sd' needs updating - please use bus_type methods [ 0.889819] Driver 'sr' needs updating - please use bus_type methods [ 0.889917] ahci 0000:00:1f.2: version 3.0 [ 0.889931] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 1.890735] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.890845] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part [ 1.890940] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.891185] scsi0 : ahci [ 1.891310] scsi1 : ahci [ 1.891419] scsi2 : ahci [ 1.891527] scsi3 : ahci [ 1.891806] scsi4 : ahci [ 1.892805] scsi5 : ahci [ 1.893844] ata1: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625100 irq 378 [ 1.894714] ata2: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625180 irq 378 [ 1.895713] ata3: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625200 irq 378 [ 1.896713] ata4: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625280 irq 378 [ 1.897723] ata5: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625300 irq 378 [ 1.898713] ata6: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625380 irq 378 [ 2.356649] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.673654] ata1.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 2.674595] ata1.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.679961] ata1.00: configured for UDMA/133 [ 2.836575] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.155395] ata2.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 3.155521] ata2.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.161112] ata2.00: configured for UDMA/133 [ 3.322501] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.633983] ata3.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 3.634449] ata3.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.640394] ata3.00: configured for UDMA/133 [ 3.806428] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.112403] ata4.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 4.113376] ata4.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.119137] ata4.00: configured for UDMA/133 [ 4.397339] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.591563] ata5.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 4.592303] ata5.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.598246] ata5.00: configured for UDMA/133 [ 4.881265] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.069692] ata6.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 5.070230] ata6.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.076402] ata6.00: configured for UDMA/133 [ 4.805409] scsi 0:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 4.806411] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 4.808276] sd 0:0:0:0: [sda] Write Protect is off [ 4.809270] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.809285] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.810314] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 4.811277] sd 0:0:0:0: [sda] Write Protect is off [ 4.812269] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.812284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.813271] sda: sda1 sda2 sda3 [ 5.107470] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.108393] scsi 1:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 5.109362] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 5.110233] sd 1:0:0:0: [sdb] Write Protect is off [ 5.111224] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.111239] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.112256] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 5.113230] sd 1:0:0:0: [sdb] Write Protect is off [ 5.114223] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.114238] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.115223] sdb: sdb1 sdb2 sdb3 [ 5.183395] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.184338] scsi 2:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 5.185346] sd 2:0:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 5.186220] sd 2:0:0:0: [sdc] Write Protect is off [ 5.187213] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.187227] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.188239] sd 2:0:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 5.189219] sd 2:0:0:0: [sdc] Write Protect is off [ 5.190212] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.190226] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.191212] sdc: sdc1 [ 5.196323] sd 2:0:0:0: [sdc] Attached SCSI disk [ 5.197334] scsi 3:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 5.198338] sd 3:0:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 5.199218] sd 3:0:0:0: [sdd] Write Protect is off [ 5.200211] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.200225] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.201238] sd 3:0:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 5.202217] sd 3:0:0:0: [sdd] Write Protect is off [ 5.203210] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.203224] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.204210] sdd: sdd1 [ 5.210279] sd 3:0:0:0: [sdd] Attached SCSI disk [ 5.211333] scsi 4:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 5.212335] sd 4:0:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB) [ 5.213216] sd 4:0:0:0: [sde] Write Protect is off [ 5.214209] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 5.214223] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.215236] sd 4:0:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB) [ 5.216215] sd 4:0:0:0: [sde] Write Protect is off [ 5.217208] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 5.217222] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.218208] sde: sde1 [ 5.226329] sd 4:0:0:0: [sde] Attached SCSI disk [ 5.227335] scsi 5:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 5.228332] sd 5:0:0:0: [sdf] 586072368 512-byte hardware sectors (300069 MB) [ 5.229214] sd 5:0:0:0: [sdf] Write Protect is off [ 5.230206] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 5.230221] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.231234] sd 5:0:0:0: [sdf] 586072368 512-byte hardware sectors (300069 MB) [ 5.232213] sd 5:0:0:0: [sdf] Write Protect is off [ 5.233205] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 5.233220] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.234205] sdf: sdf1 [ 5.240317] sd 5:0:0:0: [sdf] Attached SCSI disk [ 5.241403] sata_sil24 0000:03:00.0: version 1.1 [ 5.241433] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 5.242246] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 5.243248] scsi6 : sata_sil24 [ 5.245287] scsi7 : sata_sil24 [ 5.247256] ata7: SATA max UDMA/100 host m128@0xe0304000 port 0xe0300000 irq 18 [ 5.248205] ata8: SATA max UDMA/100 host m128@0xe0304000 port 0xe0302000 irq 18 [ 7.228923] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 7.400910] ata7.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 7.401876] ata7.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.407950] ata7.00: configured for UDMA/100 [ 9.394593] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 9.561003] ata8.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 9.561548] ata8.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.567892] ata8.00: configured for UDMA/100 [ 9.568598] scsi 6:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 9.569683] sd 6:0:0:0: [sdg] 586072368 512-byte hardware sectors (300069 MB) [ 9.570561] sd 6:0:0:0: [sdg] Write Protect is off [ 9.571546] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 9.572553] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.573575] sd 6:0:0:0: [sdg] 586072368 512-byte hardware sectors (300069 MB) [ 9.574553] sd 6:0:0:0: [sdg] Write Protect is off [ 9.575545] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 9.575560] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.576546] sdg: sdg1 [ 9.609654] sd 6:0:0:0: [sdg] Attached SCSI disk [ 9.610670] scsi 7:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 9.611677] sd 7:0:0:0: [sdh] 586072368 512-byte hardware sectors (300069 MB) [ 9.612547] sd 7:0:0:0: [sdh] Write Protect is off [ 9.613540] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 9.613554] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.614566] sd 7:0:0:0: [sdh] 586072368 512-byte hardware sectors (300069 MB) [ 9.615546] sd 7:0:0:0: [sdh] Write Protect is off [ 9.616539] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 9.616553] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.617539] sdh: sdh1 [ 9.620650] sd 7:0:0:0: [sdh] Attached SCSI disk [ 9.621631] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 9.622573] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 9.622685] scsi8 : sata_sil24 [ 9.623643] scsi9 : sata_sil24 [ 9.624621] ata9: SATA max UDMA/100 host m128@0xe0204000 port 0xe0200000 irq 19 [ 9.625539] ata10: SATA max UDMA/100 host m128@0xe0204000 port 0xe0202000 irq 19 [ 11.684245] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 11.780237] ata9.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 11.781210] ata9.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 11.789115] ata9.00: configured for UDMA/100 [ 13.852915] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 13.937011] ata10.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 13.938882] ata10.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.945218] ata10.00: configured for UDMA/100 [ 13.945947] scsi 8:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 13.947020] sd 8:0:0:0: [sdi] 586072368 512-byte hardware sectors (300069 MB) [ 13.947889] sd 8:0:0:0: [sdi] Write Protect is off [ 13.948881] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 13.948895] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.949909] sd 8:0:0:0: [sdi] 586072368 512-byte hardware sectors (300069 MB) [ 13.950887] sd 8:0:0:0: [sdi] Write Protect is off [ 13.951880] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 13.951894] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.952880] sdi: sdi1 [ 13.988990] sd 8:0:0:0: [sdi] Attached SCSI disk [ 13.990005] scsi 9:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 13.991004] sd 9:0:0:0: [sdj] 586072368 512-byte hardware sectors (300069 MB) [ 13.991881] sd 9:0:0:0: [sdj] Write Protect is off [ 13.992874] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 13.992889] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.993901] sd 9:0:0:0: [sdj] 586072368 512-byte hardware sectors (300069 MB) [ 13.994881] sd 9:0:0:0: [sdj] Write Protect is off [ 13.995873] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 13.995887] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.996873] sdj: sdj1 [ 14.003988] sd 9:0:0:0: [sdj] Attached SCSI disk [ 14.004964] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.006907] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 14.007021] scsi10 : sata_sil24 [ 14.007976] scsi11 : sata_sil24 [ 14.008943] ata11: SATA max UDMA/100 host m128@0xe0104000 port 0xe0100000 irq 16 [ 14.009873] ata12: SATA max UDMA/100 host m128@0xe0104000 port 0xe0102000 irq 16 [ 16.144568] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 16.161178] ata11.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 16.161544] ata11.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 16.167968] ata11.00: configured for UDMA/100 [ 18.309238] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 18.319689] ata12.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 18.320216] ata12.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 18.326309] ata12.00: configured for UDMA/100 [ 18.327263] scsi 10:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 18.328352] sd 10:0:0:0: [sdk] 586072368 512-byte hardware sectors (300069 MB) [ 18.329222] sd 10:0:0:0: [sdk] Write Protect is off [ 18.330215] sd 10:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 18.330229] sd 10:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.331252] sd 10:0:0:0: [sdk] 586072368 512-byte hardware sectors (300069 MB) [ 18.332221] sd 10:0:0:0: [sdk] Write Protect is off [ 18.333214] sd 10:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 18.333228] sd 10:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.334214] sdk: sdk1 [ 18.368324] sd 10:0:0:0: [sdk] Attached SCSI disk [ 18.369335] scsi 11:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 18.370336] sd 11:0:0:0: [sdl] 586072368 512-byte hardware sectors (300069 MB) [ 18.371216] sd 11:0:0:0: [sdl] Write Protect is off [ 18.372208] sd 11:0:0:0: [sdl] Mode Sense: 00 3a 00 00 [ 18.372223] sd 11:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.373235] sd 11:0:0:0: [sdl] 586072368 512-byte hardware sectors (300069 MB) [ 18.374215] sd 11:0:0:0: [sdl] Write Protect is off [ 18.375207] sd 11:0:0:0: [sdl] Mode Sense: 00 3a 00 00 [ 18.375222] sd 11:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.376207] sdl: sdl1 [ 18.380321] sd 11:0:0:0: [sdl] Attached SCSI disk [ 18.381333] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 18.382224] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 18.382298] scsi12 : pata_marvell [ 18.383309] scsi13 : pata_marvell [ 18.384281] ata13: PATA max UDMA/100 cmd 0x5018 ctl 0x5024 bmdma 0x5000 irq 17 [ 18.385206] ata14: DUMMY [ 18.466560] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 [ 18.772535] ata13.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33 [ 18.930500] ata13.00: configured for UDMA/33 [ 18.861800] scsi 12:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5 [ 18.865373] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 18.866133] Uniform CD-ROM driver Revision: 3.20 [ 18.867235] sr 12:0:0:0: Attached scsi CD-ROM sr0 [ 18.867611] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 18.918810] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0084000-e00847ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 18.919278] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 18.920130] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 18.920143] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 18.921206] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 18.926036] ehci_hcd 0000:00:1a.7: debug port 1 [ 18.926127] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 18.926131] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0625c00 [ 18.937125] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.938335] usb usb1: configuration #1 chosen from 1 choice [ 18.939201] hub 1-0:1.0: USB hub found [ 18.940135] hub 1-0:1.0: 4 ports detected [ 19.042249] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 19.043110] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 19.043113] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 19.044174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 19.049012] ehci_hcd 0000:00:1d.7: debug port 1 [ 19.049108] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 19.049114] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0625800 [ 19.060107] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.062156] usb usb2: configuration #1 chosen from 1 choice [ 19.063169] hub 2-0:1.0: USB hub found [ 19.064106] hub 2-0:1.0: 6 ports detected [ 19.166238] USB Universal Host Controller Interface driver v3.0 [ 19.168113] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 19.169090] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 19.169092] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 19.170155] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 19.171104] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0 [ 19.172265] usb usb3: configuration #1 chosen from 1 choice [ 19.173151] hub 3-0:1.0: USB hub found [ 19.174089] hub 3-0:1.0: 2 ports detected [ 19.276199] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 19.277073] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 19.277076] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 19.278138] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 19.279091] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0 [ 19.280226] usb usb4: configuration #1 chosen from 1 choice [ 19.281135] hub 4-0:1.0: USB hub found [ 19.282073] hub 4-0:1.0: 2 ports detected [ 19.464056] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 19.384175] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 19.385057] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 19.385059] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 19.386124] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 19.387070] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080 [ 19.388214] usb usb5: configuration #1 chosen from 1 choice [ 19.389120] hub 5-0:1.0: USB hub found [ 19.390056] hub 5-0:1.0: 2 ports detected [ 19.672020] hub 2-0:1.0: unable to enumerate USB device on port 4 [ 19.492163] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 19.493040] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 19.493043] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 19.494105] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 19.495056] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060 [ 19.497094] usb usb6: configuration #1 chosen from 1 choice [ 19.498103] hub 6-0:1.0: USB hub found [ 19.499040] hub 6-0:1.0: 2 ports detected [ 19.601147] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 19.602024] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 19.602026] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 19.603090] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 19.605028] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 [ 19.606177] usb usb7: configuration #1 chosen from 1 choice [ 19.607085] hub 7-0:1.0: USB hub found [ 19.608023] hub 7-0:1.0: 2 ports detected [ 19.893981] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 19.710157] Initializing USB Mass Storage driver... [ 19.827405] usb 5-1: configuration #1 chosen from 1 choice [ 20.023123] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001c5be9f] [ 20.036960] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 20.196959] usb 6-2: configuration #1 chosen from 1 choice [ 20.203891] hub 6-2:1.0: USB hub found [ 20.204409] hub 6-2:1.0: 3 ports detected [ 20.488800] usb 6-2.1: new full speed USB device using uhci_hcd and address 3 [ 20.614902] usb 6-2.1: configuration #1 chosen from 1 choice [ 20.801753] usb 6-2.2: new low speed USB device using uhci_hcd and address 4 [ 20.921856] usb 6-2.2: configuration #1 chosen from 1 choice [ 20.928781] usbcore: registered new interface driver usb-storage [ 20.928826] USB Mass Storage support registered. [ 20.930025] PNP: No PS/2 controller found. Probing ports directly. [ 20.933984] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.934820] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 20.935892] mice: PS/2 mouse device common for all mice [ 21.267717] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 21.347193] coretemp coretemp.0: Using relative temperature scale! [ 21.347866] coretemp coretemp.1: Using relative temperature scale! [ 21.348895] coretemp coretemp.2: Using relative temperature scale! [ 21.349863] coretemp coretemp.3: Using relative temperature scale! [ 21.351816] md: raid0 personality registered for level 0 [ 21.352755] md: raid1 personality registered for level 1 [ 21.370766] raid6: int64x1 2277 MB/s [ 21.388751] raid6: int64x2 3000 MB/s [ 21.406758] raid6: int64x4 2789 MB/s [ 21.424753] raid6: int64x8 2089 MB/s [ 21.442750] raid6: sse2x1 3730 MB/s [ 21.460752] raid6: sse2x2 4285 MB/s [ 21.478742] raid6: sse2x4 6664 MB/s [ 21.479735] raid6: using algorithm sse2x4 (6664 MB/s) [ 21.480736] md: raid6 personality registered for level 6 [ 21.481735] md: raid5 personality registered for level 5 [ 21.482735] md: raid4 personality registered for level 4 [ 21.483797] usbcore: registered new interface driver hiddev [ 21.880059] hiddev96: USB HID v1.00 Device [ UPS] on usb-0000:00:1d.0-1 [ 21.883920] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.1/6-2.1:1.0/input/input3 [ 21.888678] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-2.1 [ 21.895665] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.1/6-2.1:1.1/input/input4 [ 21.899676] input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-2.1 [ 21.913811] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.2/6-2.2:1.0/input/input5 [ 21.918715] input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2.2 [ 21.919727] usbcore: registered new interface driver usbhid [ 21.920680] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 21.921741] Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC). [ 21.923773] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 21.924681] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 21.962235] ALSA device list: [ 21.962662] #0: HDA Intel at 0xe0620000 irq 22 [ 21.963692] u32 classifier [ 21.964661] Actions configured [ 21.965716] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.967776] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.968682] TCP cubic registered [ 21.969680] NET: Registered protocol family 1 [ 21.970670] NET: Registered protocol family 17 [ 21.971846] RPC: Registered udp transport module. [ 21.972661] RPC: Registered tcp transport module. [ 21.974046] md: Autodetecting RAID arrays. [ 22.130876] md: Scanned 16 and added 16 devices. [ 22.131636] md: autorun ... [ 22.132636] md: considering sdl1 ... [ 22.133639] md: adding sdl1 ... [ 22.134638] md: adding sdk1 ... [ 22.135638] md: adding sdj1 ... [ 22.137637] md: adding sdi1 ... [ 22.138637] md: adding sdh1 ... [ 22.139637] md: adding sdg1 ... [ 22.140637] md: adding sdf1 ... [ 22.141637] md: adding sde1 ... [ 22.142637] md: adding sdd1 ... [ 22.143636] md: adding sdc1 ... [ 22.144636] md: sdb3 has different UUID to sdl1 [ 22.145635] md: sdb2 has different UUID to sdl1 [ 22.146635] md: sdb1 has different UUID to sdl1 [ 22.147635] md: sda3 has different UUID to sdl1 [ 22.148634] md: sda2 has different UUID to sdl1 [ 22.149634] md: sda1 has different UUID to sdl1 [ 22.151643] md: created md3 [ 22.152633] md: bind [ 22.153639] md: bind [ 22.154640] md: bind [ 22.155638] md: bind [ 22.156639] md: bind [ 22.157638] md: bind [ 22.158638] md: bind [ 22.159637] md: bind [ 22.160638] md: bind [ 22.161638] md: bind [ 22.162637] md: running: [ 22.163652] md: kicking non-fresh sdd1 from array! [ 22.164633] md: unbind [ 22.165633] md: export_rdev(sdd1) [ 22.166637] raid5: device sdl1 operational as raid disk 9 [ 22.167631] raid5: device sdk1 operational as raid disk 8 [ 22.168631] raid5: device sdj1 operational as raid disk 7 [ 22.169630] raid5: device sdi1 operational as raid disk 6 [ 22.170630] raid5: device sdh1 operational as raid disk 5 [ 22.171630] raid5: device sdg1 operational as raid disk 4 [ 22.172630] raid5: device sdf1 operational as raid disk 3 [ 22.173630] raid5: device sde1 operational as raid disk 2 [ 22.174630] raid5: device sdc1 operational as raid disk 0 [ 22.176994] raid5: allocated 10574kB for md3 [ 22.177629] raid5: raid level 5 set md3 active with 9 out of 10 devices, algorithm 2 [ 22.178629] RAID5 conf printout: [ 22.179629] --- rd:10 wd:9 [ 22.180651] disk 0, o:1, dev:sdc1 [ 22.181629] disk 2, o:1, dev:sde1 [ 22.182629] disk 3, o:1, dev:sdf1 [ 22.183628] disk 4, o:1, dev:sdg1 [ 22.184628] disk 5, o:1, dev:sdh1 [ 22.185628] disk 6, o:1, dev:sdi1 [ 22.186628] disk 7, o:1, dev:sdj1 [ 22.187628] disk 8, o:1, dev:sdk1 [ 22.187629] disk 9, o:1, dev:sdl1 [ 22.190980] md: considering sdb3 ... [ 22.191631] md: adding sdb3 ... [ 22.192628] md: sdb2 has different UUID to sdb3 [ 22.193628] md: sdb1 has different UUID to sdb3 [ 22.194629] md: adding sda3 ... [ 22.195628] md: sda2 has different UUID to sdb3 [ 22.196627] md: sda1 has different UUID to sdb3 [ 22.197712] md: created md2 [ 22.198626] md: bind [ 22.199632] md: bind [ 22.200631] md: running: [ 22.201702] raid1: raid set md2 active with 2 out of 2 mirrors [ 22.202691] md: considering sdb2 ... [ 22.203628] md: adding sdb2 ... [ 22.204626] md: sdb1 has different UUID to sdb2 [ 22.205627] md: adding sda2 ... [ 22.206626] md: sda1 has different UUID to sdb2 [ 22.207703] md: created md1 [ 22.208625] md: bind [ 22.209630] md: bind [ 22.210629] md: running: [ 22.212700] raid1: raid set md1 active with 2 out of 2 mirrors [ 22.213690] md: considering sdb1 ... [ 22.214626] md: adding sdb1 ... [ 22.215626] md: adding sda1 ... [ 22.216624] md: created md0 [ 22.217623] md: bind [ 22.218630] md: bind [ 22.219629] md: running: [ 22.220700] raid1: raid set md0 active with 2 out of 2 mirrors [ 22.221690] md: ... autorun DONE. [ 22.259336] UDF-fs: No VRS found [ 22.259957] Filesystem "md2": Disabling barriers, not supported by the underlying device [ 22.260618] XFS: correcting sb_features alignment problem [ 22.272582] XFS mounting filesystem md2 [ 22.377567] Ending clean XFS mount for filesystem: md2 [ 22.377598] VFS: Mounted root (xfs filesystem) readonly. [ 22.377609] Freeing unused kernel memory: 256k freed [ 24.720255] Adding 16787768k swap on /dev/md0. Priority:-1 extents:1 across:16787768k [ 24.824654] Filesystem "md2": Disabling barriers, not supported by the underlying device [ 26.944903] kjournald starting. Commit interval 5 seconds [ 26.518955] EXT3 FS on md1, internal journal [ 26.518959] EXT3-fs: mounted filesystem with ordered data mode. [ 26.519307] Filesystem "md3": Disabling barriers, not supported by the underlying device [ 26.519447] XFS mounting filesystem md3 [ 26.683692] Ending clean XFS mount for filesystem: md3 [ 28.560034] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 28.734046] e1000: eth2: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 30.053502] eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 33.513766] warning: `named' uses 32-bit capabilities (legacy support in use) [ 185.127945] md: bind [ 185.150226] RAID5 conf printout: [ 185.150230] --- rd:10 wd:9 [ 185.150232] disk 0, o:1, dev:sdc1 [ 185.150235] disk 1, o:1, dev:sdd1 [ 185.150238] disk 2, o:1, dev:sde1 [ 185.150241] disk 3, o:1, dev:sdf1 [ 185.150244] disk 4, o:1, dev:sdg1 [ 185.150247] disk 5, o:1, dev:sdh1 [ 185.150250] disk 6, o:1, dev:sdi1 [ 185.150253] disk 7, o:1, dev:sdj1 [ 185.150256] disk 8, o:1, dev:sdk1 [ 185.150258] disk 9, o:1, dev:sdl1 [ 185.053336] md: recovery of RAID array md3 [ 185.053361] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 185.053362] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 185.053371] md: using 128k window, over a total of 293032960 blocks. [ 5832.879634] md: md3: recovery done. [ 5833.870866] RAID5 conf printout: [ 5833.870875] --- rd:10 wd:10 [ 5833.870878] disk 0, o:1, dev:sdc1 [ 5833.870882] disk 1, o:1, dev:sdd1 [ 5833.870885] disk 2, o:1, dev:sde1 [ 5833.870888] disk 3, o:1, dev:sdf1 [ 5833.870891] disk 4, o:1, dev:sdg1 [ 5833.870893] disk 5, o:1, dev:sdh1 [ 5833.870896] disk 6, o:1, dev:sdi1 [ 5833.870909] disk 7, o:1, dev:sdj1 [ 5833.870911] disk 8, o:1, dev:sdk1 [ 5833.870913] disk 9, o:1, dev:sdl1 [55164.325258] md: data-check of RAID array md0 [55164.325266] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [55164.325268] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check. [55164.325271] md: using 128k window, over a total of 16787776 blocks. [55165.960235] md: delaying data-check of md1 until md0 has finished (they share one or more physical units) [55166.383909] md: delaying data-check of md2 until md0 has finished (they share one or more physical units) [55166.964687] md: delaying data-check of md1 until md2 has finished (they share one or more physical units) [55167.386914] md: data-check of RAID array md3 [55167.386919] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [55167.386921] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check. [55167.386928] md: using 128k window, over a total of 293032960 blocks. [55315.529779] md: md0: data-check done. [55315.445302] md: delaying data-check of md1 until md2 has finished (they share one or more physical units) [55315.445319] md: data-check of RAID array md2 [55315.445321] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [55315.445322] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check. [55315.445327] md: using 128k window, over a total of 276109056 blocks. [55315.556313] RAID1 conf printout: [55315.556321] --- wd:2 rd:2 [55315.556322] disk 0, wo:0, o:1, dev:sda1 [55315.556324] disk 1, wo:0, o:1, dev:sdb1 [58682.444937] md: md2: data-check done. [58682.365721] md: data-check of RAID array md1 [58682.365729] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [58682.365730] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check. [58682.365734] md: using 128k window, over a total of 136448 blocks. [58682.485403] RAID1 conf printout: [58682.485408] --- wd:2 rd:2 [58682.485420] disk 0, wo:0, o:1, dev:sda3 [58682.485422] disk 1, wo:0, o:1, dev:sdb3 [58683.793698] md: md1: data-check done. [58683.831793] RAID1 conf printout: [58683.831798] --- wd:2 rd:2 [58683.831800] disk 0, wo:0, o:1, dev:sda2 [58683.831801] disk 1, wo:0, o:1, dev:sdb2 [61891.936511] md: md3: data-check done. [61893.152803] RAID5 conf printout: [61893.152812] --- rd:10 wd:10 [61893.152815] disk 0, o:1, dev:sdc1 [61893.152817] disk 1, o:1, dev:sdd1 [61893.152819] disk 2, o:1, dev:sde1 [61893.152821] disk 3, o:1, dev:sdf1 [61893.152822] disk 4, o:1, dev:sdg1 [61893.152824] disk 5, o:1, dev:sdh1 [61893.152826] disk 6, o:1, dev:sdi1 [61893.152827] disk 7, o:1, dev:sdj1 [61893.152829] disk 8, o:1, dev:sdk1 [61893.152831] disk 9, o:1, dev:sdl1 [86349.168562] kvm: emulating exchange as write [87546.433705] apic write: bad size=1 fee00030 [87546.433814] Ignoring de-assert INIT to vcpu 0 [89725.513763] handle_exception: unexpected, vectoring info 0x80000306 intr info 0x80000b0d [89725.514930] pending exception: not handled yet [89725.517367] pending exception: not handled yet [107360.796671] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [107360.796680] ata4.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [107360.796681] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [107360.796685] ata4.00: status: { DRDY } [107361.099615] ata4: soft resetting link [107361.252599] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [107361.273562] ata4.00: configured for UDMA/133 [107361.273604] ata4: EH complete [107361.018520] sd 3:0:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [107361.018683] sd 3:0:0:0: [sdd] Write Protect is off [107361.018687] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [107361.040887] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/