Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755039AbYGKQrY (ORCPT ); Fri, 11 Jul 2008 12:47:24 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752431AbYGKQrP (ORCPT ); Fri, 11 Jul 2008 12:47:15 -0400 Received: from 1-1-12-13a.han.sth.bostream.se ([82.182.30.168]:53887 "EHLO palpatine.hardeman.nu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751789AbYGKQrM (ORCPT ); Fri, 11 Jul 2008 12:47:12 -0400 Date: Fri, 11 Jul 2008 18:47:06 +0200 From: David =?iso-8859-1?Q?H=E4rdeman?= To: Pierre Ossman Cc: linux-kernel@vger.kernel.org Subject: Re: sdhci: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter - disabling IRQ Message-ID: <20080711164706.GA8943@hardeman.nu> Mail-Followup-To: Pierre Ossman , linux-kernel@vger.kernel.org References: <20080624181656.GB14243@hardeman.nu> <20080710083457.7887d363@mjolnir.drzeus.cx> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20080710083457.7887d363@mjolnir.drzeus.cx> User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 54913 Lines: 899 On Thu, Jul 10, 2008 at 08:34:57AM +0200, Pierre Ossman wrote: >On Tue, 24 Jun 2008 20:16:56 +0200 David H?rdeman wrote: >> >> I'm using my brand new HP 8510w laptop with kernel 2.6.25 (Debian kernel >> 2.6.25-2-amd64 version 2.6.25-5 to be exact) and the integrated memory >> card reader is detected by the sdhci kernel module. >> >> However, about 10 minutes after boot I get the following message in >> dmesg (pid and process may change of course): >> >> [ 697.844419] irq 19: nobody cared (try booting with the "irqpoll" option) > >Do you have a card in at this point? No, no card present during the entire time from boot until the above message. >And can you give me a complete >dmesg dump. The sdhci hardware might not be the culprit, but just a >trigger in that it enables that interrupt line. Attached below....and /proc/interrupts says: CPU0 CPU1 0: 250547 290540 IO-APIC-edge timer 1: 4700 4438 IO-APIC-edge i8042 7: 0 0 IO-APIC-edge parport0 8: 1 0 IO-APIC-edge rtc 9: 2960 2887 IO-APIC-fasteoi acpi 12: 371395 342127 IO-APIC-edge i8042 14: 92 78 IO-APIC-edge ide0 16: 176056 155841 IO-APIC-fasteoi uhci_hcd:usb3, yenta 17: 59 54 IO-APIC-fasteoi uhci_hcd:usb4, yenta, HDA Intel 18: 28 27 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7, firewire_ohci 19: 40955 59046 IO-APIC-fasteoi sdhc0:slot0 20: 448 457 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5 22: 0 0 IO-APIC-fasteoi uhci_hcd:usb6 1273: 1068 598 PCI-MSI-edge eth0 1274: 41396 39036 PCI-MSI-edge iwl4965 1275: 18013 12556 PCI-MSI-edge ahci NMI: 0 0 Non-maskable interrupts LOC: 256042 253255 Local timer interrupts RES: 80030 85162 Rescheduling interrupts CAL: 222 300 function call interrupts TLB: 1925 1993 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-5) (waldi@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Fri Jun 20 19:16:03 CEST 2008 [ 0.000000] Command line: root=/dev/mapper/mainvg-mainlv ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved) [ 0.000000] BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786352) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1294336 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F7AF0, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT BFFC81CC, 0084 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: FACP BFFC8084, 00F4 (r4 HP 30C5 3 HP 1) [ 0.000000] ACPI: DSDT BFFC8544, 12E41 (r1 HP 8510x 10000 MSFT 3000001) [ 0.000000] ACPI: FACS BFFE7D80, 0040 [ 0.000000] ACPI: SLIC BFFC8250, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: HPET BFFC83C8, 0038 (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: APIC BFFC8400, 0068 (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: MCFG BFFC8468, 003C (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: TCPA BFFC84A4, 0032 (r2 HP 30C5 1 HP 1) [ 0.000000] ACPI: ASF! BFFC84D8, 0069 (r16 HP CHIMAYU 1 HP 0) [ 0.000000] ACPI: SSDT BFFDB385, 0328 (r1 HP HPQSAT 1 MSFT 3000001) [ 0.000000] ACPI: SSDT BFFDB6AD, 017C (r1 HP HPQMRM 1 MSFT 3000001) [ 0.000000] ACPI: SSDT BFFDC231, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT BFFDC490, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT BFFDC536, 04D7 (r1 HP CpuPm 3000 INTL 20060317) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013c000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786352) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000013c000000 [ 0.000000] NODE_DATA [000000000000e000 - 0000000000014fff] [ 0.000000] bootmap [0000000000015000 - 000000000003c7ff] pages 28 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE [ 0.000000] early res: 2 [200000-64f2f7] TEXT DATA BSS [ 0.000000] early res: 3 [3781b000-37fefd7e] RAMDISK [ 0.000000] early res: 4 [9fc00-a0bff] EBDA [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] No mptable found. [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006600000 on node 0 [ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810006a00000 on node 0 [ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810006e00000 on node 0 [ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007200000 on node 0 [ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007600000 on node 0 [ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810007a00000 on node 0 [ 0.000000] [ffffe20004400000-ffffe200045fffff] PMD ->ffff810007e00000 on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1294336 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786352 [ 0.000000] 0: 1048576 -> 1294336 [ 0.000000] On node 0 totalpages: 1032015 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1113 pages reserved [ 0.000000] DMA zone: 2830 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767976 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc5000 [ 0.000000] PM: Registered nosave memory: 00000000bffc5000 - 00000000bffc6000 [ 0.000000] PM: Registered nosave memory: 00000000bffc6000 - 00000000bffe7000 [ 0.000000] PM: Registered nosave memory: 00000000bffe7000 - 00000000bffe8000 [ 0.000000] PM: Registered nosave memory: 00000000bffe8000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000 [ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000 [ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013206 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mapper/mainvg-mainlv ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000001] time.c: Detected 2393.988 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x8021000 - 0xc021000 [ 0.004000] Memory: 3991888k/5177344k available (2184k kernel code, 136172k reserved, 1088k data, 372k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.080007] Calibrating delay using timer specific routine.. 4792.82 BogoMIPS (lpj=9585655) [ 0.080197] Security Framework initialized [ 0.080277] SELinux: Disabled at boot. [ 0.080355] Capability LSM initialized [ 0.080741] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.083353] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.084753] Mount-cache hash table entries: 256 [ 0.084971] Initializing cgroup subsys ns [ 0.085051] Initializing cgroup subsys cpuacct [ 0.085145] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.085283] CPU: L2 cache: 4096K [ 0.085359] CPU 0/0 -> Node 0 [ 0.085434] CPU: Physical Processor ID: 0 [ 0.085510] CPU: Processor Core ID: 0 [ 0.085594] CPU0: Thermal monitoring handled by SMI [ 0.085595] using mwait in idle threads. [ 0.086369] ACPI: Core revision 20070126 [ 0.093327] ACPI: Override [DSDT- 8510x], this is unsafe: tainting kernel [ 0.093410] ACPI: Table DSDT replaced by host OS [ 0.093608] ACPI: DSDT 00000000, 12E41 (r1 HP 8510x 10000 MSFT 3000001) [ 0.093822] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>Using local APIC timer interrupts. [ 0.144010] APIC timer calibration result 12468669 [ 0.144011] Detected 12.468 MHz APIC timer. [ 0.144224] Booting processor 1/2 APIC 0x1 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4787.97 BogoMIPS (lpj=9575950) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b [ 0.232584] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.236047] Brought up 2 CPUs [ 0.236204] CPU0 attaching sched-domain: [ 0.236206] domain 0: span 00000003 [ 0.236207] groups: 00000001 00000002 [ 0.236210] domain 1: span 00000003 [ 0.236211] groups: 00000003 [ 0.236213] CPU1 attaching sched-domain: [ 0.236214] domain 0: span 00000003 [ 0.236216] groups: 00000002 00000001 [ 0.236218] domain 1: span 00000003 [ 0.236219] groups: 00000003 [ 0.236458] net_namespace: 1016 bytes [ 0.236538] Booting paravirtualized kernel on bare hardware [ 0.236780] NET: Registered protocol family 16 [ 0.237019] ACPI: bus type pci registered [ 0.237169] PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved [ 0.237249] PCI: Not using MMCONFIG. [ 0.237325] PCI: Using configuration type 1 [ 0.240289] ACPI: EC: Look up EC in DSDT [ 0.005184] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.302028] ACPI: Interpreter enabled [ 0.302106] ACPI: (supports S0 S3 S4 S5) [ 0.302441] ACPI: Using IOAPIC for interrupt routing [ 0.314099] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.314181] ACPI: EC: driver started in interrupt mode [ 0.314312] ACPI: PCI Root Bridge [C003] (0000:00) [ 0.315653] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.315747] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.316869] PCI: Transparent bridge - 0000:00:1e.0 [ 0.317033] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.317483] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT] [ 0.317600] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] [ 0.317773] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] [ 0.317913] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] [ 0.318055] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] [ 0.366117] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 0.366647] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.367174] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.367701] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5 [ 0.368237] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.368763] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5 [ 0.372237] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11) [ 0.372658] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] [ 0.373179] ACPI: Power Resource [C238] (on) [ 0.373302] ACPI: Power Resource [C254] (on) [ 0.373433] ACPI: Power Resource [C17C] (off) [ 0.376141] ACPI: Power Resource [C362] (off) [ 0.376316] ACPI: Power Resource [C365] (off) [ 0.376489] ACPI: Power Resource [C366] (off) [ 0.376662] ACPI: Power Resource [C367] (off) [ 0.376834] ACPI: Power Resource [C368] (off) [ 0.376954] ACPI: Power Resource [C369] (off) [ 0.377129] ACPI: Power Resource [C382] (off) [ 0.377303] ACPI: Power Resource [C383] (off) [ 0.377476] ACPI: Power Resource [C384] (off) [ 0.377649] ACPI: Power Resource [C385] (off) [ 0.377823] ACPI: Power Resource [C386] (off) [ 0.378080] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.378181] pnp: PnP ACPI init [ 0.378261] ACPI: bus type pnp registered [ 0.378467] 00:00: calling quirk 0xffffffff8035b9ee: quirk_system_pci_resources+0x0/0x173() [ 0.378507] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.381619] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.382791] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.382988] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.383030] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.383069] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.383107] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.383150] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.383334] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.383377] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.383420] pnp 00:0a: Plug and Play ACPI device, IDs SYN0136 SYN0100 SYN0002 PNP0f13 (active) [ 0.383729] 00:0b: calling quirk 0xffffffff8035b9ee: quirk_system_pci_resources+0x0/0x173() [ 0.383770] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.385875] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.385930] 00:0d: calling quirk 0xffffffff8035b9ee: quirk_system_pci_resources+0x0/0x173() [ 0.385979] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.387331] 00:0e: calling quirk 0xffffffff8035b9ee: quirk_system_pci_resources+0x0/0x173() [ 0.387386] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.387406] pnp: PnP ACPI: found 15 devices [ 0.387484] ACPI: ACPI bus type pnp unregistered [ 0.387699] usbcore: registered new interface driver usbfs [ 0.387818] usbcore: registered new interface driver hub [ 0.387926] usbcore: registered new device driver usb [ 0.388112] PCI: Using ACPI for IRQ routing [ 0.388190] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.404048] PCI-GART: No AMD northbridge found. [ 0.404130] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.404457] hpet0: 3 64-bit timers, 14318180 Hz [ 0.405568] ACPI: RTC can wake from S4 [ 0.420043] pnp: the driver 'system' has been registered [ 0.420051] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.420131] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.420213] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved [ 0.420304] system 00:00: driver attached [ 0.420311] system 00:0b: ioport range 0x500-0x55f has been reserved [ 0.420392] system 00:0b: ioport range 0x800-0x80f has been reserved [ 0.420473] system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.420565] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.420656] system 00:0b: driver attached [ 0.420660] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved [ 0.420741] system 00:0d: ioport range 0x1000-0x107f has been reserved [ 0.420822] system 00:0d: ioport range 0x1100-0x113f has been reserved [ 0.420903] system 00:0d: ioport range 0x1200-0x121f has been reserved [ 0.420984] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.421066] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved [ 0.421158] system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.421249] system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.421340] system 00:0d: iomem range 0xfed90000-0xfed99fff could not be reserved [ 0.421432] system 00:0d: driver attached [ 0.421436] system 00:0e: iomem range 0xcd200-0xcffff has been reserved [ 0.421516] system 00:0e: iomem range 0xd2000-0xd3fff has been reserved [ 0.421598] system 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved [ 0.421689] system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.421781] system 00:0e: driver attached [ 0.422104] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 [ 0.422195] PCI: Bridge: 0000:00:01.0 [ 0.422272] IO window: 4000-4fff [ 0.422351] MEM window: 0xe5000000-0xe7ffffff [ 0.422430] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.422512] PCI: Bridge: 0000:00:1c.0 [ 0.422589] IO window: disabled. [ 0.422669] MEM window: disabled. [ 0.422747] PREFETCH window: disabled. [ 0.422828] PCI: Bridge: 0000:00:1c.1 [ 0.422905] IO window: disabled. [ 0.422985] MEM window: 0xe4000000-0xe40fffff [ 0.423065] PREFETCH window: disabled. [ 0.423147] PCI: Bridge: 0000:00:1c.4 [ 0.423225] IO window: 2000-3fff [ 0.423306] MEM window: 0xe0000000-0xe3ffffff [ 0.423386] PREFETCH window: disabled. [ 0.423470] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [ 0.423548] IO window: 0x00006000-0x000060ff [ 0.423629] IO window: 0x00006400-0x000064ff [ 0.423710] PREFETCH window: 0xc4000000-0xc7ffffff [ 0.423792] MEM window: 0xcc000000-0xcfffffff [ 0.423873] PCI: Bus 4, cardbus bridge: 0000:02:06.1 [ 0.423951] IO window: 0x00006800-0x000068ff [ 0.424040] IO window: 0x00006c00-0x00006cff [ 0.424121] PREFETCH window: 0xc8000000-0xcbffffff [ 0.424202] MEM window: 0xec000000-0xefffffff [ 0.424284] PCI: Bridge: 0000:00:1e.0 [ 0.424362] IO window: 6000-6fff [ 0.424443] MEM window: 0xe4100000-0xe43fffff [ 0.424523] PREFETCH window: 0x00000000c4000000-0x00000000cbffffff [ 0.424618] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.424774] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.424795] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.424951] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.424973] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.425129] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.425151] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.425308] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.425321] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.425338] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.425509] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.425685] NET: Registered protocol family 2 [ 0.464163] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.465303] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.469987] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.470745] TCP: Hash tables configured (established 524288 bind 65536) [ 0.470827] TCP reno registered [ 0.480216] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.504046] Switched to high resolution mode on CPU 0 [ 0.747848] it is [ 1.032652] Freeing initrd memory: 8019k freed [ 0.800179] audit: initializing netlink socket (disabled) [ 0.800276] type=2000 audit(1215791369.036:1): initialized [ 0.800664] Total HugeTLB memory allocated, 0 [ 0.800824] VFS: Disk quotas dquot_6.5.1 [ 0.800921] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.801072] io scheduler noop registered [ 0.801150] io scheduler anticipatory registered [ 0.801227] io scheduler deadline registered [ 0.801314] io scheduler cfq registered (default) [ 0.801534] pci 0000:01:00.0: Boot video device [ 0.801627] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.801652] assign_interrupt_mode Found MSI capability [ 0.801755] Allocate Port Service[0000:00:01.0:pcie00] [ 0.801828] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.801869] assign_interrupt_mode Found MSI capability [ 0.801988] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.802083] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.802125] assign_interrupt_mode Found MSI capability [ 0.802245] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.802273] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.802366] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.802408] assign_interrupt_mode Found MSI capability [ 0.802528] Allocate Port Service[0000:00:1c.4:pcie00] [ 0.802556] Allocate Port Service[0000:00:1c.4:pcie02] [ 0.804687] Real Time Clock Driver v1.12ac [ 0.804976] hpet_resources: 0xfed00000 is busy [ 0.805055] Linux agpgart interface v0.103 [ 0.805134] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.805454] pnp: the driver 'serial' has been registered [ 0.805607] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.805840] 0000:00:03.3: ttyS0 at I/O 0x5030 (irq = 17) is a 16550A [ 0.806524] brd: module loaded [ 0.806652] input: Macintosh mouse button emulation as /class/input/input0 [ 0.806803] pnp: the driver 'i8042 kbd' has been registered [ 0.806816] i8042 kbd 00:09: driver attached [ 0.806840] pnp: the driver 'i8042 aux' has been registered [ 0.806855] i8042 aux 00:0a: driver attached [ 0.806877] PNP: PS/2 Controller [PNP0303:C251,PNP0f13:C252] at 0x60,0x64 irq 1,12 [ 0.808800] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.809636] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.809717] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.809796] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.809875] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.809954] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.828142] mice: PS/2 mouse device common for all mice [ 0.828250] cpuidle: using governor ladder [ 0.828328] cpuidle: using governor menu [ 0.828686] TCP cubic registered [ 0.828769] NET: Registered protocol family 1 [ 0.828853] NET: Registered protocol family 17 [ 0.829027] registered taskstats version 1 [ 0.829211] Freeing unused kernel memory: 372k freed [ 0.849990] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.140410] ACPI: Transitioning device [C36A] to D3 [ 1.140524] ACPI: PNP0C0B:00 is registered as cooling_device0 [ 1.140606] ACPI: Fan [C36A] (off) [ 1.140870] ACPI: Transitioning device [C36B] to D3 [ 1.140973] ACPI: PNP0C0B:01 is registered as cooling_device1 [ 1.141054] ACPI: Fan [C36B] (off) [ 1.141318] ACPI: Transitioning device [C36C] to D3 [ 1.141421] ACPI: PNP0C0B:02 is registered as cooling_device2 [ 1.141502] ACPI: Fan [C36C] (off) [ 1.141764] ACPI: Transitioning device [C36D] to D3 [ 1.141866] ACPI: PNP0C0B:03 is registered as cooling_device3 [ 1.141948] ACPI: Fan [C36D] (off) [ 1.142209] ACPI: Transitioning device [C36E] to D3 [ 1.142312] ACPI: PNP0C0B:04 is registered as cooling_device4 [ 1.142394] ACPI: Fan [C36E] (off) [ 1.142551] ACPI: Transitioning device [C36F] to D3 [ 1.142653] ACPI: PNP0C0B:05 is registered as cooling_device5 [ 1.142735] ACPI: Fan [C36F] (off) [ 1.142999] ACPI: Transitioning device [C387] to D3 [ 1.143101] ACPI: PNP0C0B:06 is registered as cooling_device6 [ 1.144098] ACPI: Fan [C387] (off) [ 1.144360] ACPI: Transitioning device [C388] to D3 [ 1.144463] ACPI: PNP0C0B:07 is registered as cooling_device7 [ 1.144544] ACPI: Fan [C388] (off) [ 1.144806] ACPI: Transitioning device [C389] to D3 [ 1.144908] ACPI: PNP0C0B:08 is registered as cooling_device8 [ 1.144991] ACPI: Fan [C389] (off) [ 1.145253] ACPI: Transitioning device [C38A] to D3 [ 1.145355] ACPI: PNP0C0B:09 is registered as cooling_device9 [ 1.145437] ACPI: Fan [C38A] (off) [ 1.145699] ACPI: Transitioning device [C38B] to D3 [ 1.145801] ACPI: PNP0C0B:0a is registered as cooling_device10 [ 1.145883] ACPI: Fan [C38B] (off) [ 0.917373] ACPI: SSDT BFFDB8F1, 02C1 (r1 HP Cpu0Ist 3000 INTL 20060317) [ 0.917954] ACPI: SSDT BFFDBC37, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317) [ 1.161160] Monitor-Mwait will be used to enter C-1 state [ 1.161163] Monitor-Mwait will be used to enter C-2 state [ 1.161257] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.161548] ACPI: ACPI0007:00 is registered as cooling_device11 [ 1.161628] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.162118] ACPI: SSDT BFFDB829, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) [ 1.162571] ACPI: SSDT BFFDBBB2, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) [ 0.930878] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 1.164085] Marking TSC unstable due to TSC halts in idle [ 0.931291] ACPI: ACPI0007:01 is registered as cooling_device12 [ 0.931378] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.936455] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.180893] ACPI: Thermal Zone [TZ2] (54 C) [ 1.183746] ACPI: LNXTHERM:02 is registered as thermal_zone1 [ 1.184560] ACPI: Thermal Zone [TZ3] (46 C) [ 1.193676] ACPI: LNXTHERM:03 is registered as thermal_zone2 [ 0.968264] ACPI: Thermal Zone [TZ4] (27 C) [ 0.972272] ACPI: LNXTHERM:04 is registered as thermal_zone3 [ 0.976191] ACPI: Thermal Zone [TZ5] (30 C) [ 1.226944] ACPI: LNXTHERM:05 is registered as thermal_zone4 [ 1.246699] ACPI: Thermal Zone [TZ0] (65 C) [ 1.246755] ACPI: LNXTHERM:06 is registered as thermal_zone5 [ 1.246755] ACPI: Thermal Zone [TZ1] (61 C) [ 1.264636] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 [ 1.264724] e1000e: Copyright (c) 1999-2007 Intel Corporation. [ 1.264858] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 1.265024] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 1.494756] USB Universal Host Controller Interface driver v3.0 [ 1.266346] No dock devices found. [ 1.271163] SCSI subsystem initialized [ 1.285533] libata version 3.00 loaded. [ 1.350548] sdhci: Secure Digital Host Controller Interface driver [ 1.350555] sdhci: Copyright(c) Pierre Ossman [ 1.596004] ricoh-mmc: Ricoh MMC Controller disabling driver [ 1.596092] ricoh-mmc: Copyright(c) Philip Langdale [ 1.388896] eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:4b:80:af:5c [ 1.388980] eth0: Intel(R) PRO/1000 Network Connection [ 1.389086] eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff [ 1.389248] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.389413] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 1.389417] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.389651] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.393658] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.393743] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 1.393754] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8041000 [ 1.410568] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.410758] usb usb1: configuration #1 chosen from 1 choice [ 1.410856] hub 1-0:1.0: USB hub found [ 1.410938] hub 1-0:1.0: 4 ports detected [ 1.513508] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.513591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.513681] usb usb1: Product: EHCI Host Controller [ 1.513760] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd [ 1.513839] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.513955] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 1.514120] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.514123] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.514233] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.521297] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.521379] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 1.521390] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8048000 [ 1.533452] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.533616] usb usb2: configuration #1 chosen from 1 choice [ 1.533712] hub 2-0:1.0: USB hub found [ 1.533791] hub 2-0:1.0: 6 ports detected [ 1.636307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.636394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.636484] usb usb2: Product: EHCI Host Controller [ 1.636563] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd [ 1.636643] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.862463] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.862463] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 1.862463] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.862463] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.862463] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005060 [ 1.862463] usb usb3: configuration #1 chosen from 1 choice [ 1.862463] hub 3-0:1.0: USB hub found [ 1.862463] hub 3-0:1.0: 2 ports detected [ 1.962327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.962411] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.962501] usb usb3: Product: UHCI Host Controller [ 1.962580] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd [ 1.962658] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.962772] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 1.962941] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 1.962944] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.963061] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.963182] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005080 [ 1.963357] usb usb4: configuration #1 chosen from 1 choice [ 1.963451] hub 4-0:1.0: USB hub found [ 1.963530] hub 4-0:1.0: 2 ports detected [ 1.978272] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1.982256] Clocksource tsc unstable (delta = -295181074 ns) [ 2.066106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.066193] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.066284] usb usb4: Product: UHCI Host Controller [ 2.066362] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd [ 2.066441] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.066547] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 2.066721] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.066724] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.066830] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.066943] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000050a0 [ 2.067110] usb usb5: configuration #1 chosen from 1 choice [ 2.067209] hub 5-0:1.0: USB hub found [ 2.067290] hub 5-0:1.0: 2 ports detected [ 2.169296] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.169384] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.169475] usb usb5: Product: UHCI Host Controller [ 2.169553] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd [ 2.169632] usb usb5: SerialNumber: 0000:00:1d.0 [ 2.169736] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 2.169910] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 2.169913] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.170021] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.170136] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000050c0 [ 2.170302] usb usb6: configuration #1 chosen from 1 choice [ 2.170401] hub 6-0:1.0: USB hub found [ 2.170481] hub 6-0:1.0: 2 ports detected [ 2.217176] hub 2-0:1.0: unable to enumerate USB device on port 2 [ 2.273076] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.273163] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.273254] usb usb6: Product: UHCI Host Controller [ 2.273332] usb usb6: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd [ 2.273412] usb usb6: SerialNumber: 0000:00:1d.1 [ 2.273514] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 2.273688] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 2.273691] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.273798] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.273910] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0 [ 2.274075] usb usb7: configuration #1 chosen from 1 choice [ 2.274174] hub 7-0:1.0: USB hub found [ 2.274254] hub 7-0:1.0: 2 ports detected [ 2.376862] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.376949] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.377040] usb usb7: Product: UHCI Host Controller [ 2.377118] usb usb7: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd [ 2.377197] usb usb7: SerialNumber: 0000:00:1d.2 [ 2.157441] ahci 0000:00:1f.2: version 3.0 [ 2.157441] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 21 [ 2.456828] usb 2-3: new high speed USB device using ehci_hcd and address 3 [ 2.368916] usb 2-3: configuration #1 chosen from 1 choice [ 2.369152] usb 2-3: New USB device found, idVendor=4146, idProduct=ba01 [ 2.369233] usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [ 2.369314] usb 2-3: Product: USB Mass Storage Device [ 2.369390] usb 2-3: SerialNumber: 00A00000000142 [ 2.601071] Initializing USB Mass Storage driver... [ 2.607551] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.778052] usb 3-1: configuration #1 chosen from 1 choice [ 2.779740] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d [ 2.783337] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.783419] usb 3-1: Product: HP Integrated Module [ 2.783496] usb 3-1: Manufacturer: Broadcom Corp [ 3.077922] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 3.157738] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 3.157835] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part [ 3.157930] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.158107] scsi0 : ahci [ 3.158290] scsi1 : ahci [ 3.158442] scsi2 : ahci [ 3.158572] ata1: SATA max UDMA/133 abar m2048@0xe8049000 port 0xe8049100 irq 1275 [ 3.158664] ata2: DUMMY [ 3.161713] ata3: DUMMY [ 3.462821] usb 5-2: configuration #1 chosen from 1 choice [ 3.465336] usb 5-2: New USB device found, idVendor=08ff, idProduct=2580 [ 3.465417] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.465499] usb 5-2: Product: Fingerprint Sensor [ 3.593258] scsi3 : SCSI emulation for USB Mass Storage devices [ 3.374086] usb-storage: device found at 3 [ 3.374086] usb-storage: waiting for device to settle before scanning [ 3.593559] usbcore: registered new interface driver usb-storage [ 3.593647] USB Mass Storage support registered. [ 3.856517] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.638465] ata1.00: ATA-7: ST9200420ASG, 3.AAA, max UDMA/133 [ 3.638465] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.859757] ata1.00: configured for UDMA/133 [ 3.640195] scsi 0:0:0:0: Direct-Access ATA ST9200420ASG 3.AA PQ: 0 ANSI: 5 [ 3.642751] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.643039] Uniform Multi-Platform E-IDE driver [ 3.643118] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.871414] Driver 'sd' needs updating - please use bus_type methods [ 3.872542] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 3.872641] sd 0:0:0:0: [sda] Write Protect is off [ 3.872719] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.872737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.872875] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 3.872965] sd 0:0:0:0: [sda] Write Protect is off [ 3.873043] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.873061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.873154] sda: sda1 sda2 [ 3.887359] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.720245] firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10 [ 3.720642] sdhci: SDHCI controller found at 0000:02:06.3 [1180:0822] (rev 20) [ 3.720763] ACPI: PCI Interrupt 0000:02:06.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 3.720930] sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.721059] mmc0: SDHCI at 0xe4103000 irq 19 DMA [ 3.942461] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10) [ 3.942567] ricoh-mmc: Controller is now disabled. [ 3.943097] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1 [ 3.943194] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.943354] ICH8M: not 100% native mode: will probe irqs later [ 3.943441] ICH8M: IDE port disabled [ 3.943520] ide0: BM-DMA at 0x5100-0x5107, BIOS settings: hda:DMA, hdb:PIO [ 3.943680] Probing IDE interface ide0... [ 4.439353] firewire_core: created device fw0: GUID 00023f99293d1810, S400 [ 4.675079] hda: MATSHITADVD-RAM UJ-861H, ATAPI CD/DVD-ROM drive [ 5.010127] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.010432] hda: MWDMA2 mode selected [ 5.010831] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.800209] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 4.800672] Uniform CD-ROM driver Revision: 3.20 [ 5.067896] device-mapper: uevent: version 1.0.3 [ 5.068258] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 8.585331] usb-storage: device scan complete [ 8.586298] scsi 3:0:0:0: Direct-Access I0MEGA UMni1GB*IOM2K4 1.01 PQ: 0 ANSI: 2 [ 8.586944] sd 3:0:0:0: [sdb] 2048000 512-byte hardware sectors (1049 MB) [ 8.587548] sd 3:0:0:0: [sdb] Write Protect is off [ 8.587548] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 8.587548] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 8.589064] sd 3:0:0:0: [sdb] 2048000 512-byte hardware sectors (1049 MB) [ 8.589797] sd 3:0:0:0: [sdb] Write Protect is off [ 8.589876] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 8.589877] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 8.589961] sdb: sdb1 [ 8.590864] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 9.165396] PM: Starting manual resume from disk [ 9.422219] kjournald starting. Commit interval 5 seconds [ 9.215032] EXT3-fs: mounted filesystem with ordered data mode. [ 11.627738] udevd version 124 started [ 12.117547] input: Power Button (FF) as /class/input/input2 [ 12.181070] ACPI: Power Button (FF) [PWRF] [ 12.181245] input: Sleep Button (CM) as /class/input/input3 [ 12.245069] ACPI: Sleep Button (CM) [C274] [ 12.245201] input: Lid Switch as /class/input/input4 [ 12.277177] ACPI: Lid Switch [C26E] [ 12.534039] ACPI: Battery Slot [C1F4] (battery present) [ 12.534319] ACPI: Battery Slot [C1F3] (battery absent) [ 12.535054] ACPI: AC Adapter [C1F2] (on-line) [ 12.535206] ACPI: WMI: Mapper loaded [ 12.449296] ACPI: device:03 is registered as cooling_device13 [ 12.450177] input: Video Bus as /class/input/input5 [ 12.509356] ACPI: Video Device [C14B] (multi-head: yes rom: no post: no) [ 12.758228] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 12.758384] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 12.758509] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.906091] Bluetooth: Core ver 2.11 [ 12.743655] NET: Registered protocol family 31 [ 12.743759] Bluetooth: HCI device and connection manager initialized [ 12.743846] Bluetooth: HCI socket layer initialized [ 12.900042] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c5] [ 13.181488] input: PC Speaker as /class/input/input6 [ 13.024509] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 [ 13.024591] Socket status: 30000006 [ 13.024669] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 13.024750] pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 13.024830] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff [ 13.025157] Yenta: CardBus bridge found at 0000:02:06.1 [103c:30c5] [ 13.265781] Bluetooth: HCI USB driver ver 2.9 [ 13.267856] usbcore: registered new interface driver hci_usb [ 13.152530] Yenta: ISA IRQ mask 0x0000, PCI irq 17 [ 13.152612] Socket status: 30000810 [ 13.152690] Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 13.152784] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 13.152865] pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 13.152946] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff [ 13.220625] pnp: the driver 'tpm_inf_pnp' has been registered [ 13.220639] tpm_inf_pnp 00:03: Found C239 with ID IFX0102 [ 13.220772] tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 13.221117] tpm_inf_pnp 00:03: driver attached [ 13.573639] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks [ 13.573740] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 13.573913] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 13.574094] PCI: Setting latency timer of device 0000:10:00.0 to 64 [ 13.574117] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 13.623043] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels [ 13.430525] phy0: Selected rate control algorithm 'iwl-4965-rs' [ 13.529028] ACPI: PCI interrupt for device 0000:10:00.0 disabled [ 13.791215] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 13.791390] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 13.981201] pccard: PCMCIA card inserted into slot 1 [ 13.801815] cs: memory probe 0xc4000000-0xcbffffff: excluding 0xc4000000-0xcbffffff [ 13.802112] cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff [ 13.807235] pcmcia: registering new device pcmcia1.0 [ 13.819246] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000 [ 13.819348] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 14.056385] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 13.896260] pnp: the driver 'parport_pc' has been registered [ 13.896274] parport_pc 00:02: reported by Plug and Play ACPI [ 13.896433] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 14.180927] parport_pc 00:02: driver attached [ 14.004125] Probing IDE interface ide1... [ 14.665058] Probing IDE interface ide1... [ 15.327306] Probing IDE interface ide1... [ 15.987508] Probing IDE interface ide1... [ 16.653878] Probing IDE interface ide1... [ 17.323745] Probing IDE interface ide1... [ 17.986282] Probing IDE interface ide1... [ 18.538784] input: PS/2 Generic Mouse as /class/input/input8 [ 18.647155] Probing IDE interface ide1... [ 19.320789] Probing IDE interface ide1... [ 19.994254] Probing IDE interface ide1... [ 20.666661] ide-cs: ide_register() at 0x6100 & 0x610e, irq 17 failed [ 20.921659] Probing IDE interface ide1... [ 21.590141] Probing IDE interface ide1... [ 22.260238] Probing IDE interface ide1... [ 22.930242] Probing IDE interface ide1... [ 23.600538] Probing IDE interface ide1... [ 24.268936] Probing IDE interface ide1... [ 24.939216] Probing IDE interface ide1... [ 25.608802] Probing IDE interface ide1... [ 26.278791] Probing IDE interface ide1... [ 26.947439] Probing IDE interface ide1... [ 27.617566] ide-cs: ide_register() at 0x6100 & 0x610e, irq 17 failed [ 29.011590] EXT3 FS on dm-2, internal journal [ 29.688449] loop: module loaded [ 30.711493] kjournald starting. Commit interval 5 seconds [ 30.716598] EXT3 FS on sda1, internal journal [ 30.716744] EXT3-fs: mounted filesystem with ordered data mode. [ 30.972323] Adding 4194296k swap on /dev/mapper/mainvg-swaplv. Priority:-1 extents:1 across:4194296k [ 33.243517] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 33.243615] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) [ 38.780696] NET: Registered protocol family 10 [ 38.781203] lo: Disabled Privacy Extensions [ 38.781671] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.782122] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.004386] lp0: using parport0 (interrupt-driven). [ 40.264224] ppdev: user-space parallel port driver [ 45.634857] Bluetooth: L2CAP ver 2.9 [ 45.634968] Bluetooth: L2CAP socket layer initialized [ 45.524961] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 45.839788] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 45.839871] Bluetooth: BNEP filters: protocol multicast [ 45.634542] Bridge firewalling registered [ 45.635739] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 45.869858] Bluetooth: RFCOMM socket layer initialized [ 45.869981] Bluetooth: RFCOMM TTY layer initialized [ 45.870093] Bluetooth: RFCOMM ver 1.8 [ 50.125136] wlan0: Initial auth_alg=0 [ 50.125142] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX [ 50.326066] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX [ 50.526077] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX [ 50.726090] wlan0: authentication with AP XX:XX:XX:XX:XX:XX timed out [ 52.898902] wlan0: Initial auth_alg=0 [ 52.898906] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX [ 52.904090] wlan0: Initial auth_alg=0 [ 52.904094] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX [ 52.907002] wlan0: Initial auth_alg=0 [ 52.907005] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX [ 52.909904] wlan0: RX authentication from XX:XX:XX:XX:XX:XX (alg=0 transaction=2 status=0) [ 52.909909] wlan0: authenticated [ 52.909911] wlan0: associate with AP XX:XX:XX:XX:XX:XX [ 52.912175] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=4) [ 52.912179] wlan0: associated [ 52.912181] wlan0: switched to short barker preamble (BSSID=XX:XX:XX:XX:XX:XX) [ 52.912742] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 62.999277] wlan0: no IPv6 routers present [ 74.388846] CPU0 attaching NULL sched-domain. [ 74.388859] CPU1 attaching NULL sched-domain. [ 74.408739] CPU0 attaching sched-domain: [ 74.408751] domain 0: span 00000003 [ 74.408755] groups: 00000001 00000002 [ 74.408763] domain 1: span 00000003 [ 74.408767] groups: 00000003 [ 74.408773] CPU1 attaching sched-domain: [ 74.408777] domain 0: span 00000003 [ 74.408781] groups: 00000002 00000001 [ 74.408787] domain 1: span 00000003 [ 74.408791] groups: 00000003 [ 637.730290] irq 19: nobody cared (try booting with the "irqpoll" option) [ 637.730290] Pid: 0, comm: swapper Tainted: G A 2.6.25-2-amd64 #1 [ 637.730290] [ 637.730290] Call Trace: [ 637.730290] [] __update_rq_clock+0x1a/0xcf [ 637.730290] [] __report_bad_irq+0x30/0x72 [ 637.730290] [] note_interrupt+0x1fd/0x23f [ 637.730290] [] handle_fasteoi_irq+0xa5/0xc8 [ 637.730290] [] do_IRQ+0x6d/0xd9 [ 637.730290] [] ret_from_intr+0x0/0x19 [ 637.730290] [] hpet_legacy_next_event+0x0/0x34 [ 637.730290] [] :processor:acpi_idle_enter_simple+0x18d/0x1ff [ 637.730290] [] cpuidle_idle_call+0x7a/0xb3 [ 637.730290] [] cpuidle_idle_call+0x0/0xb3 [ 637.730290] [] cpu_idle+0x89/0xb3 [ 637.730290] [ 637.730290] handlers: [ 637.730290] [] (sdhci_irq+0x0/0x609 [sdhci]) [ 637.730290] Disabling IRQ #19 -- David H?rdeman -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/