Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753689AbYGLFKh (ORCPT ); Sat, 12 Jul 2008 01:10:37 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751722AbYGLFKR (ORCPT ); Sat, 12 Jul 2008 01:10:17 -0400 Received: from smtp1.linux-foundation.org ([140.211.169.13]:33124 "EHLO smtp1.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751470AbYGLFKO (ORCPT ); Sat, 12 Jul 2008 01:10:14 -0400 Date: Fri, 11 Jul 2008 22:09:01 -0700 From: Andrew Morton To: Stephen Harker Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org Subject: Re: PROBLEM: module a100u2w (SCSI, Initio) on ppc Message-Id: <20080711220901.e1b69adb.akpm@linux-foundation.org> In-Reply-To: <20080712033040.GA8086@h42136.pems.adfa.edu.au> References: <20080712033040.GA8086@h42136.pems.adfa.edu.au> X-Mailer: Sylpheed 2.4.8 (GTK+ 2.12.5; x86_64-redhat-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23724 Lines: 456 (cc linux-scsi) On Sat, 12 Jul 2008 13:30:41 +1000 Stephen Harker wrote: > The SCSI Initio a100u2w driver compiles as a module, loads, but > hangs on a powerpc machine. > > I am running linux (YellowDog 5.0) on a PowerMac 7600. I am using > self-compiled kernels. The initio a100u2w card runs successfully > under Mac OSX and OS9. In the past when I tried the a100u2w module > under kernel 2.4 and early 2.6 it would hang for at least 30 minutes > (in the end I rebooted the machine). > > I thought I would try again recently using 2.6.23.14 and 2.6.25.4 > kernels. This was more successful in that the machine did not hang > seemingly forever. However, the module seems to fail in > initialisation and no drive partitions are seen/mounted. I tried > removing the module (rmmod), the reloading it (modprobe) and similar > issues are noted. Output from dmesg shows the problems. The > following is the output from dmesg under 2.6.25.4, look for scsi2 and > initio and inia100. I am afraid that I am away from home at present > and don't have all the information that may be desirable. I hope the > following is adequate. The kernel and system run well except for this > one module. > > Using PowerMac machine description > Total memory = 768MB; using 2048kB for hash table (at cfe00000) > Linux version 2.6.25.4 (root@wonnangatta) (gcc version 4.1.1 20060525 (Yellow Dog 4.1.1-1)) #5 Sat Jul 5 11:02:58 EST 2008 > Found a Grand Central mac-io controller, rev: 2, mapped at 0xfdf00000 > PowerMac motherboard: PowerMac 7500 > console [udbg0] enabled > Entering add_active_range(0, 0, 196608) 0 entries of 256 used > Cache coherency enabled for bandit/PSX > Found Bandit PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1 > PCI host bridge /bandit (primary) ranges: > MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 > IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 > MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 > Found Chaos PCI host bridge at 0x00000000f0000000. Firmware bus number: 2->2 > PCI host bridge /chaos ranges: > MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 > IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 > MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 > nvram: OF partition at 0x1800 > nvram: XP partition at 0x1300 > nvram: NR partition at 0x1400 > Top of RAM: 0x30000000, Total RAM: 0x30000000 > Memory hole size: 0MB > Zone PFN ranges: > DMA 0 -> 196608 > Normal 196608 -> 196608 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 196608 > On node 0 totalpages: 196608 > DMA zone: 1536 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 195072 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072 > Kernel command line: root=/dev/sda8 video=atyfb:vmode:16,cmode:32, lcr=0xB9180000 > irq: Found primary Apple PIC /bandit/gc for 32 irqs > irq: System has 32 possible interrupts > PID hash table entries: 4096 (order: 12, 16384 bytes) > GMT Delta read from XPRAM: 600 minutes, DST: off > time_init: decrementer frequency = 12.498833 MHz > time_init: processor frequency = 455.000000 MHz > clocksource: timebase mult[14007a61] shift[22] registered > clockevent: decrementer mult[333] shift[16] cpu[0] > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [tty0] > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 766336k/786432k available (4328k kernel code, 19760k reserved, 160k data, 137k bss, 208k init) > SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 > Calibrating delay loop... 24.96 BogoMIPS (lpj=49920) > Mount-cache hash table entries: 512 > device-tree: Duplicate name in /bandit/pci-bridge, renamed to "pci3592,35#1" > net_namespace: 536 bytes > NET: Registered protocol family 16 > PCI: Probing PCI hardware > PCI: Cannot allocate resource region 0 of device 0001:02:0d.0, will remap > PCI: Bridge: 0000:00:0f.0 > IO window: disabled. > MEM window: 0x80800000-0x808fffff > PREFETCH window: disabled. > Registering pmac pic with sysfs... > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > NET: Registered protocol family 2 > Switched to high resolution mode on CPU 0 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 6, 262144 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > Thermal assist unit using timers, shrink_timer: 500 jiffies > audit: initializing netlink socket (disabled) > type=2000 audit(1215242654.320:1): initialized > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > PCI: Enabling device 0000:00:0e.0 (0086 -> 0087) > aty128fb: Found Open Firmware ROM Image > aty128fb: BIOS not located, guessing timings. > aty128fb: Rage128 RE PCI [chip rev 0x2] 16M 128-bit SDR SGRAM (1:1) > Console: switching to colour frame buffer device 128x48 > fb0: ATY Rage128 frame buffer device on Rage128 RE PCI > controlfb: VRAM Total = 4MB (2MB @ bank 1, 2MB @ bank 2) > controlfb: using video mode 6 and color mode 0. > fb1: control display adapter > Generic RTC Driver v1.07 > Macintosh non-volatile memory driver v1.1 > brd: module loaded > loop: module loaded > pcnet32.c:v1.34 14.Aug.2007 tsbogend@alpha.franken.de > PPP generic driver version 2.4.2 > PPP Deflate Compression module registered > MacIO PCI driver attached to Grand Central chipset > eth0: MACE at 00:05:02:ae:83:28, chip revision 25.64 > input: Macintosh mouse button emulation as /class/input/input0 > Macintosh CUDA driver v0.5 for Unified ADB. > Uniform Multi-Platform E-IDE driver > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > adb: starting probe task... > ide-floppy driver 1.00 > mesh: configured for synchronous 10 MB/s > adb devices: [2]: 2 2 [3]: 3 1 > ADB keyboard at 2, handler set to 3 > Detected ADB keyboard, type ANSI. > input: ADB keyboard as /class/input/input1 > mesh: performing initial bus reset... > ADB mouse at 3, handler set to 2 > input: ADB mouse as /class/input/input2 > adb: finished probe task... > scsi0 : MESH > scsi1 : 53C94 > st: Version 20080221, fixed bufsize 32768, s/g segs 256 > Driver 'st' needs updating - please use bus_type methods > Driver 'sd' needs updating - please use bus_type methods > Driver 'sr' needs updating - please use bus_type methods > usbmon: debugfs is not available > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > PCI: Enabling device 0000:01:00.0 (0014 -> 0016) > ohci_hcd 0000:01:00.0: OHCI Host Controller > ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:01:00.0: irq 25, io mem 0x80803000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 3 ports detected > mesh: target 2 synchronous at 10.0 MB/s > scsi 0:0:2:0: Direct-Access IBM-PSG DNES-318350Y !# SA30 PQ: 0 ANSI: 3 > mesh: target 3 synchronous at 10.0 MB/s > scsi 0:0:3:0: CD-ROM SONY CD-RW CRX160S 1.0a PQ: 0 ANSI: 4 > PCI: Enabling device 0000:01:00.1 (0014 -> 0016) > ohci_hcd 0000:01:00.1: OHCI Host Controller > ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:01:00.1: irq 25, io mem 0x80802000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > usb 1-2: new low speed USB device using ohci_hcd and address 2 > sd 0:0:2:0: [sda] 35548320 512-byte hardware sectors (18201 MB) > sd 0:0:2:0: [sda] Write Protect is off > sd 0:0:2:0: [sda] Mode Sense: c3 00 00 08 > usb 1-2: configuration #1 chosen from 1 choice > sd 0:0:2:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:2:0: [sda] 35548320 512-byte hardware sectors (18201 MB) > sd 0:0:2:0: [sda] Write Protect is off > sd 0:0:2:0: [sda] Mode Sense: c3 00 00 08 > sd 0:0:2:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 > sd 0:0:2:0: [sda] Attached SCSI disk > sd 0:0:2:0: Attached scsi generic sg0 type 0 > mice: PS/2 mouse device common for all mice > APM Battery Driver > input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:01:00.0-2 > usb 2-2: new full speed USB device using ohci_hcd and address 2 > usb 2-2: configuration #1 chosen from 1 choice > usbcore: registered new interface driver usbhid > drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > oprofile: using timer interrupt. > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > NET: Registered protocol family 15 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > scsi: waiting for bus probes to complete ... > sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 0:0:3:0: Attached scsi CD-ROM sr0 > sr 0:0:3:0: Attached scsi generic sg1 type 5 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 208k init > pmac_zilog: 0.6 (Benjamin Herrenschmidt ) > ttyS0 at MMIO 0xf3013020 (irq = 36) is a Z85c30 ESCC - Serial port > ttyS1 at MMIO 0xf3013000 (irq = 39) is a Z85c30 ESCC - Serial port > Linux agpgart interface v0.103 > scsi2 : Initio INI-A100U2W SCSI device driver; Revision: 1.02d > Initializing USB Mass Storage driver... > scsi3 : SCSI emulation for USB Mass Storage devices > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > usbcore: registered new interface driver ub > usb-storage: device scan complete > scsi 3:0:0:0: Direct-Access ST320082 2A PQ: 0 ANSI: 0 > PCI: Enabling device 0000:01:00.2 (0014 -> 0016) > ehci_hcd 0000:01:00.2: EHCI Host Controller > ehci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:01:00.2: irq 25, io mem 0x80800000 > usb 1-2: USB disconnect, address 2 > ehci_hcd 0000:01:00.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 5 ports detected > usb 2-2: USB disconnect, address 2 > PCI: Enabling device 0000:01:01.0 (0014 -> 0016) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[25] MMIO=[80801000-808017ff] Max Packet=[2048] IR/IT contexts=[4/4] > ieee1394: Node added: ID:BUS[0-00:1023] GUID[0001a37050300510] > ieee1394: Host added: ID:BUS[0-01:1023] GUID[00004ce0b000280e] > IEEE 1394 device has ROM CRC error > scsi4 : SBP-2 IEEE-1394 > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com > ieee1394: sbp2: Logged into SBP-2 device > ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048] > scsi: waiting for bus probes to complete ... > EXT3 FS on sda8, internal journal > kjournald starting. Commit interval 5 seconds > EXT3-fs warning: maximal mount count reached, running e2fsck is recommended > EXT3 FS on sda10, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda11, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda12, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda9, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > scsi 2:0:0:0: Device offlined - not ready after error recovery > Adding 262136k swap on /dev/sda7. Priority:-1 extents:1 across:262136k > Adding 713700k swap on /dev/sda13. Priority:-2 extents:1 across:713700k > warning: process `kudzu' used the deprecated sysctl system call with 1.23. > ip_tables: (C) 2000-2006 Netfilter Core Team > scsi 2:0:1:0: Device offlined - not ready after error recovery > scsi 2:0:2:0: Device offlined - not ready after error recovery > scsi 2:0:3:0: Device offlined - not ready after error recovery > scsi 2:0:4:0: Device offlined - not ready after error recovery > warning: `named' uses 32-bit capabilities (legacy support in use) > scsi 2:0:5:0: Device offlined - not ready after error recovery > scsi 2:0:6:0: Device offlined - not ready after error recovery > scsi 2:0:8:0: Device offlined - not ready after error recovery > scsi 2:0:9:0: Device offlined - not ready after error recovery > scsi 2:0:10:0: Device offlined - not ready after error recovery > scsi 2:0:11:0: Device offlined - not ready after error recovery > scsi 2:0:12:0: Device offlined - not ready after error recovery > scsi 2:0:13:0: Device offlined - not ready after error recovery > scsi 2:0:14:0: Device offlined - not ready after error recovery > scsi 2:0:15:0: Device offlined - not ready after error recovery > sd 3:0:0:0: [sdb] READ CAPACITY failed > sd 3:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK > sd 3:0:0:0: [sdb] Sense not available. > sd 3:0:0:0: [sdb] Write Protect is off > sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00 > sd 3:0:0:0: [sdb] Assuming drive cache: write through > sd 3:0:0:0: [sdb] Attached SCSI disk > sd 3:0:0:0: Attached scsi generic sg2 type 0 > scsi 4:0:0:0: CD-ROM LITE-ON COMBO SOHC-5232K NK0G PQ: 0 ANSI: 0 > sr1: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray > sr 4:0:0:0: Attached scsi CD-ROM sr1 > sr 4:0:0:0: Attached scsi generic sg2 type 5 > fd0: SWIM3 floppy controller > hub 3-0:1.0: unable to enumerate USB device on port 3 > usb 3-4: new high speed USB device using ehci_hcd and address 3 > usb 3-4: configuration #1 chosen from 1 choice > scsi5 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > usb 1-2: new low speed USB device using ohci_hcd and address 3 > usb 1-2: configuration #1 chosen from 1 choice > input: Logitech USB-PS/2 Optical Mouse as /class/input/input4 > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:01:00.0-2 > input: PowerMac Beep as /class/input/input5 > usb-storage: device scan complete > scsi 5:0:0:0: Direct-Access ST320082 2A PQ: 0 ANSI: 0 > sd 5:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) > sd 5:0:0:0: [sdb] Write Protect is off > sd 5:0:0:0: [sdb] Mode Sense: 33 00 00 00 > sd 5:0:0:0: [sdb] Assuming drive cache: write through > sd 5:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) > sd 5:0:0:0: [sdb] Write Protect is off > sd 5:0:0:0: [sdb] Mode Sense: 33 00 00 00 > sd 5:0:0:0: [sdb] Assuming drive cache: write through > sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 > sd 5:0:0:0: [sdb] Attached SCSI disk > sd 5:0:0:0: Attached scsi generic sg3 type 0 > [drm] Initialized drm 1.1.0 20060810 > [drm] Initialized r128 2.5.0 20030725 on minor 0 > kjournald starting. Commit interval 5 seconds > EXT3 FS on sdb12, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > inia100: initial orchid fail!! > > The following is the output of cat /proc/cpuinfo > > processor : 0 > cpu : 7400, altivec supported > temperature : 27-29 C (uncalibrated) > clock : 455.000000MHz > revision : 2.9 (pvr 000c 0209) > bogomips : 24.96 > timebase : 12498833 > platform : PowerMac > machine : Power Macintosh > motherboard : AAPL,7500 MacRISC > detected as : 16 (PowerMac 7500) > pmac flags : 00000000 > pmac-generation : OldWorld > > The following is the output of lspci -vvv (as root) > > 00:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge (rev 03) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, Cache Line Size 08 > Interrupt: pin ? routed to IRQ 22 > > 00:0d.0 SCSI storage controller: Initio Corporation INI-A100U2W (rev 01) > Subsystem: Initio Corporation INI-A100U2W > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, Cache Line Size 08 > Interrupt: pin A routed to IRQ 23 > Region 0: I/O ports at 1000 [size=256] > Region 1: Memory at 80900000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at f3040000 [disabled] [size=64K] > Capabilities: [50] Power Management version 1 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0e.0 VGA compatible controller: ATI Technologies Inc Rage 128 RE/SG (prog-if 00 [VGA]) > Subsystem: Unknown device b530:0408 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (2000ns min), Cache Line Size 08 > Interrupt: pin A routed to IRQ 24 > Region 0: Memory at 88000000 (32-bit, prefetchable) [size=64M] > Region 1: I/O ports at 0400 [size=256] > Region 2: Memory at 80904000 (32-bit, non-prefetchable) [size=16K] > Expansion ROM at f3020000 [disabled] [size=128K] > Capabilities: [5c] Power Management version 1 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0f.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 11) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, Cache Line Size 08 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: 80800000-808fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [90] #06 [0000] > > 00:10.0 Class ff00: Apple Computer Inc. Grand Central I/O (rev 02) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, Cache Line Size 08 > Interrupt: pin ? routed to IRQ 22 > Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=128K] > > 01:00.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) > Subsystem: Unknown device 3592:0035 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (250ns min, 10500ns max), Cache Line Size 08 > Interrupt: pin A routed to IRQ 25 > Region 0: Memory at 80803000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) > Subsystem: Unknown device 3592:0035 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (250ns min, 10500ns max), Cache Line Size 08 > Interrupt: pin B routed to IRQ 25 > Region 0: Memory at 80802000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI]) > Subsystem: Unknown device 3592:2050 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (4000ns min, 8500ns max), Cache Line Size 08 > Interrupt: pin C routed to IRQ 25 > Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:01.0 FireWire (IEEE 1394): NEC Corporation uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr (rev 01) (prog-if 10 [OHCI]) > Subsystem: NEC Corporation uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (5000ns min, 11000ns max), Cache Line Size 08 > Interrupt: pin A routed to IRQ 25 > Region 0: Memory at 80801000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > > 0001:02:0b.0 Non-VGA unclassified device: Apple Computer Inc. Control Video > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Interrupt: pin ? routed to IRQ 26 > Region 1: Memory at 90000000 (32-bit, non-prefetchable) [disabled] [size=64K] > Region 2: Memory at 94000000 (32-bit, non-prefetchable) [disabled] [size=64M] > > 0001:02:0d.0 Class ff00: Apple Computer Inc. PlanB Video-In (rev 01) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32, Cache Line Size 08 > Interrupt: pin ? routed to IRQ 28 > Region 0: Memory at f1000000 (32-bit, non-prefetchable) [disabled] [size=1K] > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/