Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753329AbYGSD27 (ORCPT ); Fri, 18 Jul 2008 23:28:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750763AbYGSD2v (ORCPT ); Fri, 18 Jul 2008 23:28:51 -0400 Received: from bromo.msbb.uc.edu ([129.137.3.146]:39479 "HELO bromo.msbb.uc.edu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1750704AbYGSD2s (ORCPT ); Fri, 18 Jul 2008 23:28:48 -0400 Date: Fri, 18 Jul 2008 23:28:45 -0400 From: Jack Howarth To: Yinghai Lu Cc: Ingo Molnar , Thomas Gleixner , "H. Peter Anvin" , jbarnes@virtuousgeek.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf Message-ID: <20080719032845.GA9662@bromo.msbb.uc.edu> References: <200807180941.09779.yhlu.kernel@gmail.com> <20080718202118.GC24122@elte.hu> <86802c440807181326l489b7763sdb040f5b6e575d8c@mail.gmail.com> <20080719005849.GA9055@bromo.msbb.uc.edu> <86802c440807181822l5138ff85k7d8c2e2702a11025@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <86802c440807181822l5138ff85k7d8c2e2702a11025@mail.gmail.com> User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 93619 Lines: 2004 YH, The mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch both applied cleanly to the current linus kernel git and solve my problems with MMCONFIG not starting. I am attaching a dmesg log below of a boot with 'debug apic=verbose initcall_debug pci=routeirq'. If you look at the section immediately before the line... pci 0000:00:1e.0: transparent bridge you will see that it is radically different from what I posted for the freeze under PCIEASPM with MMCONFIG (using your original mmconfig patch)... PCI: 0000:00:1f.1 reg 10 io port: [ 40d8, 40df] PCI: 0000:00:1f.1 reg 14 io port: [ 40ec, 40ef] PCI: 0000:00:1f.1 reg 18 io port: [ 40d0, 40d7] PCI: 0000:00:1f.1 reg 1c io port: [ 40e8, 40eb] PCI: 0000:00:1f.1 reg 20 io port: [ 40b0, 40bf] pci 0000:00.1f.1: calling pci_fixup_transparent_bridge+0x0/0x2a PCI: Found 0000:00:1f.2 [8086/27c4] 000101 00 PCI: 0000:00:1f.2 reg 10 io port: [ 40c8, 40cf] PCI: 0000:00:1f.2 reg 14 io port: [ 40e4, 40e7] PCI: 0000:00:1f.2 reg 18 io port: [ 40c0, 40c7] PCI: 0000:00:1f.2 reg 1c io port: [ 40e0, 40e3] PCI: 0000:00:1f.2 reg 20 io port: [ 40a0, 40af] PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff] pci: 0000:00:1f.2 calling pci_fixup_transparent_bridge+0x0/0x2a PCI: Found 0000:00:1f.3 [8086/27da] 000c05 00 PCI: 0000:00:1f.3 reg 20 io port: [ efa0, efbf] PCI: 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a PCI: Fixups for bus 0000:00 PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0 PCI: Scanning bus 0000:01 PCI: Found 0000:01:00.0 [1002/71c5] 000300 00 PCI: 0000:00:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff] PCI: 0000:00:01:00.0 reg 14 io port: [ 3000, 30ff] PCI: 0000:00:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff] Perhaps one of the PCIEASPM experts can explain why there are so many calls to pci_fixup_transparent_bridge and a scan behind the bridge. Nothing like that appears in the dmesg from your latest patch without PCIEASPM. Jack Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27-0.156.rc0.git4.fc9.x86_64 (howarth@localhost.localdomain) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jul 18 22:02:40 EDT 2008 Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable) BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS) BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data) BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS) BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data) BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 00bf000000 page 2M 00bf000000 - 00bf0e9000 page 4k kernel direct mapping tables up to bf0e9000 @ 8000-d000 last_map_addr: bf0e9000 end: bf0e9000 RAMDISK: 37d35000 - 37fef5d1 DMI 2.4 present. ACPI: RSDP 000FE020, 0024 (r2 APPLE ) ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309) ACPI: FACS BFEC0000, 0040 ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) ACPI: DMI detected: Apple No NUMA configuration found Faking a node at 0000000000000000-00000000bf0e9000 Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used Bootmem setup node 0 0000000000000000-00000000bf0e9000 NODE_DATA [000000000000b000 - 000000000001ffff] bootmap [0000000000020000 - 0000000000037e1f] pages 18 (6 early reservations) ==> bootmem #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000e5fe68] TEXT DATA BSS ==> [0000200000 - 0000e5fe68] #3 [0037d35000 - 0037fef5d1] RAMDISK ==> [0037d35000 - 0037fef5d1] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bf0e9 On node 0 totalpages: 782472 DMA zone: 96 pages used for memmap DMA zone: 3269 pages reserved DMA zone: 634 pages, LIFO batch:0 DMA32 zone: 18246 pages used for memmap DMA32 zone: 760227 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffffffff5fc000 ( fee00000) mapped IOAPIC to ffffffffff5fb000 (00000000fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) PERCPU: Allocating 442304 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 760861 Policy zone: DMA32 Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 2327.490 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1840 kB per task-struct memory footprint: 3456 bytes Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3039268k/3130276k available (3099k kernel code, 90620k reserved, 1746k data, 1544k init) CPA: page pool initialized 48 of 48 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4654.98 BogoMIPS (lpj=2327490) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080609 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0 not connected. IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06 Using local APIC timer interrupts. APIC timer calibration result 10390580 Detected 10.390 MHz APIC timer. lockdep: fixing up alternatives. Booting processor 1/1 ip 6000 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. <6>4654.79 BogoMIPS (lpj=2327398) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9309.77 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=96 bytes sizeof(inode)=1088 bytes sizeof(dentry)=256 bytes sizeof(ext3inode)=1488 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=9528 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 khelper used greatest stack depth: 5648 bytes left calling init_cpufreq_transition_notifier_list+0x0/0x20 initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs calling net_ns_init+0x0/0x134 net_namespace: 1352 bytes initcall net_ns_init+0x0/0x134 returned 0 after 0 msecs calling cpufreq_tsc+0x0/0x16 initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs calling init_smp_flush+0x0/0x6b initcall init_smp_flush+0x0/0x6b returned 0 after 0 msecs calling print_banner+0x0/0x13 Booting paravirtualized kernel on bare hardware initcall print_banner+0x0/0x13 returned 0 after 0 msecs calling sysctl_init+0x0/0x37 initcall sysctl_init+0x0/0x37 returned 0 after 0 msecs calling ksysfs_init+0x0/0xc0 initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs calling init_jiffies_clocksource+0x0/0x17 initcall init_jiffies_clocksource+0x0/0x17 returned 0 after 0 msecs calling pm_init+0x0/0x39 initcall pm_init+0x0/0x39 returned 0 after 0 msecs calling pm_disk_init+0x0/0x1e initcall pm_disk_init+0x0/0x1e returned 0 after 0 msecs calling swsusp_header_init+0x0/0x31 initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs calling ftrace_dynamic_init+0x0/0xd7 initcall ftrace_dynamic_init+0x0/0xd7 returned 0 after 0 msecs calling filelock_init+0x0/0x33 initcall filelock_init+0x0/0x33 returned 0 after 0 msecs calling init_misc_binfmt+0x0/0x44 initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 msecs calling init_script_binfmt+0x0/0x17 initcall init_script_binfmt+0x0/0x17 returned 0 after 0 msecs calling init_elf_binfmt+0x0/0x17 initcall init_elf_binfmt+0x0/0x17 returned 0 after 0 msecs calling init_compat_elf_binfmt+0x0/0x17 initcall init_compat_elf_binfmt+0x0/0x17 returned 0 after 0 msecs calling debugfs_init+0x0/0x56 initcall debugfs_init+0x0/0x56 returned 0 after 0 msecs calling securityfs_init+0x0/0x56 initcall securityfs_init+0x0/0x56 returned 0 after 0 msecs calling random32_init+0x0/0x5f initcall random32_init+0x0/0x5f returned 0 after 0 msecs calling early_resume_init+0x0/0x1d4 Time: 3:06:17 Date: 07/19/08 initcall early_resume_init+0x0/0x1d4 returned 0 after 0 msecs calling cpufreq_core_init+0x0/0x8f initcall cpufreq_core_init+0x0/0x8f returned 0 after 0 msecs calling cpuidle_init+0x0/0x45 initcall cpuidle_init+0x0/0x45 returned 0 after 0 msecs calling sock_init+0x0/0x63 initcall sock_init+0x0/0x63 returned 0 after 0 msecs calling netpoll_init+0x0/0x46 initcall netpoll_init+0x0/0x46 returned 0 after 0 msecs calling netlink_proto_init+0x0/0x150 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x150 returned 0 after 0 msecs calling bdi_class_init+0x0/0x42 initcall bdi_class_init+0x0/0x42 returned 0 after 0 msecs calling kobject_uevent_init+0x0/0x47 initcall kobject_uevent_init+0x0/0x47 returned 0 after 0 msecs calling pcibus_class_init+0x0/0x17 initcall pcibus_class_init+0x0/0x17 returned 0 after 0 msecs calling pci_driver_init+0x0/0x17 initcall pci_driver_init+0x0/0x17 returned 0 after 0 msecs calling backlight_class_init+0x0/0x4e initcall backlight_class_init+0x0/0x4e returned 0 after 0 msecs calling dock_init+0x0/0x5f No dock devices found. initcall dock_init+0x0/0x5f returned 0 after 0 msecs calling tty_class_init+0x0/0x2f initcall tty_class_init+0x0/0x2f returned 0 after 0 msecs calling vtconsole_class_init+0x0/0xbf khelper used greatest stack depth: 4904 bytes left initcall vtconsole_class_init+0x0/0xbf returned 0 after 0 msecs calling register_node_type+0x0/0x83 initcall register_node_type+0x0/0x83 returned 0 after 0 msecs calling enable_pci_io_ecs+0x0/0x33 initcall enable_pci_io_ecs+0x0/0x33 returned 0 after 0 msecs calling early_fill_mp_bus_info+0x0/0x80c initcall early_fill_mp_bus_info+0x0/0x80c returned 0 after 0 msecs calling arch_kdebugfs_init+0x0/0x1e0 initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 msecs calling mtrr_if_init+0x0/0x7e initcall mtrr_if_init+0x0/0x7e returned 0 after 0 msecs calling ffh_cstate_init+0x0/0x36 initcall ffh_cstate_init+0x0/0x36 returned 0 after 0 msecs calling acpi_pci_init+0x0/0x45 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x45 returned 0 after 0 msecs calling init_acpi_device_notify+0x0/0x50 initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs calling dmi_id_init+0x0/0x2f1 initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 msecs calling pci_arch_init+0x0/0x53 PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in E820 PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x53 returned 0 after 14 msecs calling topology_init+0x0/0x96 initcall topology_init+0x0/0x96 returned 0 after 0 msecs calling mtrr_init_finialize+0x0/0x42 initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 msecs calling param_sysfs_init+0x0/0x1f3 initcall param_sysfs_init+0x0/0x1f3 returned 0 after 9 msecs calling pm_sysrq_init+0x0/0x1e initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs calling readahead_init+0x0/0x3d initcall readahead_init+0x0/0x3d returned 0 after 0 msecs calling init_bio+0x0/0xca initcall init_bio+0x0/0xca returned 0 after 0 msecs calling integrity_init+0x0/0x3f initcall integrity_init+0x0/0x3f returned 0 after 0 msecs calling blk_settings_init+0x0/0x2f initcall blk_settings_init+0x0/0x2f returned 0 after 0 msecs calling blk_ioc_init+0x0/0x2f initcall blk_ioc_init+0x0/0x2f returned 0 after 0 msecs calling genhd_device_init+0x0/0x5a initcall genhd_device_init+0x0/0x5a returned 0 after 0 msecs calling blk_dev_integrity_init+0x0/0x2f initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 msecs calling pci_slot_init+0x0/0x4c initcall pci_slot_init+0x0/0x4c returned 0 after 0 msecs calling fbmem_init+0x0/0x8f initcall fbmem_init+0x0/0x8f returned 0 after 0 msecs calling acpi_init+0x0/0x226 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing initcall acpi_init+0x0/0x226 returned 0 after 25 msecs calling acpi_scan_init+0x0/0x10f initcall acpi_scan_init+0x0/0x10f returned 0 after 52 msecs calling acpi_ec_init+0x0/0x66 ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs calling acpi_pci_root_init+0x0/0x2d ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:07.0 reg 10 32bit mmio: [d8404000, d8404fff] PCI: 0000:00:1b.0 reg 10 64bit mmio: [d8400000, d8403fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f] PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f] PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f] PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [d8405400, d84057ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [40d8, 40df] PCI: 0000:00:1f.1 reg 14 io port: [40ec, 40ef] PCI: 0000:00:1f.1 reg 18 io port: [40d0, 40d7] PCI: 0000:00:1f.1 reg 1c io port: [40e8, 40eb] PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf] PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf] PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7] PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7] PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3] PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af] PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf] PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff] PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff] PCI: 0000:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: bridge 0000:00:01.0 io port: [3000, 3fff] PCI: bridge 0000:00:01.0 32bit mmio: [d8300000, d83fffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff] PCI: 0000:02:00.0 reg 10 64bit mmio: [d8200000, d8203fff] PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled PCI: bridge 0000:00:1c.0 io port: [2000, 2fff] PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d82fffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [d8100000, d810ffff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled PCI: bridge 0000:00:1c.1 32bit mmio: [d8100000, d81fffff] PCI: bridge 0000:00:1c.2 io port: [1000, 1fff] PCI: bridge 0000:00:1c.2 32bit mmio: [d4100000, d80fffff] PCI: bridge 0000:00:1c.2 64bit mmio pref: [d0000000, d3ffffff] PCI: 0000:0c:03.0 reg 10 32bit mmio: [d4004000, d40047ff] PCI: 0000:0c:03.0 reg 14 32bit mmio: [d4000000, d4003fff] pci 0000:0c:03.0: supports D1 pci 0000:0c:03.0: supports D2 pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:0c:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [d4000000, d40fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 78 msecs calling acpi_pci_link_init+0x0/0x4d ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) initcall acpi_pci_link_init+0x0/0x4d returned 0 after 14 msecs calling acpi_power_init+0x0/0x7c initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs calling acpi_system_init+0x0/0x265 initcall acpi_system_init+0x0/0x265 returned 0 after 0 msecs calling acpi_cm_sbs_init+0x0/0xd initcall acpi_cm_sbs_init+0x0/0xd returned 0 after 0 msecs calling pnp_init+0x0/0x25 Linux Plug and Play Support v0.97 (c) Adam Belay initcall pnp_init+0x0/0x25 returned 0 after 0 msecs calling pnpacpi_init+0x0/0x91 pnp: PnP ACPI init ACPI: bus type pnp registered IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x91 returned 0 after 20 msecs calling misc_init+0x0/0x9d initcall misc_init+0x0/0x9d returned 0 after 0 msecs calling cn_init+0x0/0xf3 initcall cn_init+0x0/0xf3 returned 0 after 0 msecs calling init_scsi+0x0/0x96 SCSI subsystem initialized initcall init_scsi+0x0/0x96 returned 0 after 1 msecs calling ata_init+0x0/0x368 libata version 3.00 loaded. initcall ata_init+0x0/0x368 returned 0 after 0 msecs calling init_pcmcia_cs+0x0/0x2d initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 msecs calling usb_init+0x0/0x131 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x131 returned 0 after 1 msecs calling serio_init+0x0/0x8e initcall serio_init+0x0/0x8e returned 0 after 0 msecs calling input_init+0x0/0x10c initcall input_init+0x0/0x10c returned 0 after 0 msecs calling rtc_init+0x0/0x75 initcall rtc_init+0x0/0x75 returned 0 after 0 msecs calling power_supply_class_init+0x0/0x39 initcall power_supply_class_init+0x0/0x39 returned 0 after 0 msecs calling thermal_init+0x0/0x56 initcall thermal_init+0x0/0x56 returned 0 after 0 msecs calling md_init+0x0/0xd5 initcall md_init+0x0/0xd5 returned 0 after 0 msecs calling leds_init+0x0/0x2f initcall leds_init+0x0/0x2f returned 0 after 0 msecs calling dma_bus_init+0x0/0x31 initcall dma_bus_init+0x0/0x31 returned 0 after 0 msecs calling pci_subsys_init+0x0/0x126 PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified IOAPIC[0]: Set routing entry (1-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 IOAPIC[0]: Set routing entry (1-22 -> 0x51 -> IRQ 22 Mode:1 Active:1) pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 IOAPIC[0]: Set routing entry (1-17 -> 0x59 -> IRQ 17 Mode:1 Active:1) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 IOAPIC[0]: Set routing entry (1-18 -> 0x61 -> IRQ 18 Mode:1 Active:1) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 IOAPIC[0]: Set routing entry (1-23 -> 0x69 -> IRQ 23 Mode:1 Active:1) pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 IOAPIC[0]: Set routing entry (1-19 -> 0x71 -> IRQ 19 Mode:1 Active:1) pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 number of MP IRQ sources: 15. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 00000000 ....... : physical APIC id: 00 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 .... register #02: 00170020 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 003 0 0 0 0 0 1 1 31 02 003 0 0 0 0 0 1 1 30 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 0 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 0 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 0 0 0 0 0 1 1 3A 0b 003 0 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 003 1 1 0 1 0 1 1 49 11 003 1 1 0 1 0 1 1 59 12 003 1 1 0 1 0 1 1 61 13 003 1 1 0 1 0 1 1 71 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 003 1 1 0 1 0 1 1 51 17 003 1 1 0 1 0 1 1 69 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. initcall pci_subsys_init+0x0/0x126 returned 0 after 21 msecs calling proto_init+0x0/0x33 initcall proto_init+0x0/0x33 returned 0 after 0 msecs calling net_dev_init+0x0/0x1f3 initcall net_dev_init+0x0/0x1f3 returned 0 after 0 msecs calling neigh_init+0x0/0x76 initcall neigh_init+0x0/0x76 returned 0 after 0 msecs calling fib_rules_init+0x0/0xab initcall fib_rules_init+0x0/0xab returned 0 after 0 msecs calling pktsched_init+0x0/0xc9 initcall pktsched_init+0x0/0xc9 returned 0 after 0 msecs calling tc_filter_init+0x0/0x51 initcall tc_filter_init+0x0/0x51 returned 0 after 0 msecs calling tc_action_init+0x0/0x51 initcall tc_action_init+0x0/0x51 returned 0 after 0 msecs calling genl_init+0x0/0xdd initcall genl_init+0x0/0xdd returned 0 after 3 msecs calling cipso_v4_init+0x0/0x8d initcall cipso_v4_init+0x0/0x8d returned 0 after 0 msecs calling wireless_nlevent_init+0x0/0x46 initcall wireless_nlevent_init+0x0/0x46 returned 0 after 0 msecs calling netlbl_init+0x0/0x86 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x86 returned 0 after 0 msecs calling sysctl_init+0x0/0x32 initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs calling pci_iommu_init+0x0/0x21 PCI-GART: No AMD northbridge found. initcall pci_iommu_init+0x0/0x21 returned 0 after 0 msecs calling hpet_late_init+0x0/0x107 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz initcall hpet_late_init+0x0/0x107 returned 0 after 1 msecs calling clocksource_done_booting+0x0/0x17 initcall clocksource_done_booting+0x0/0x17 returned 0 after 0 msecs calling ftrace_init_debugfs+0x0/0xfd initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs calling tracer_alloc_buffers+0x0/0x5a1 tracer: 1286 pages allocated for 65536 entries of 80 bytes actual entries 65586 initcall tracer_alloc_buffers+0x0/0x5a1 returned 0 after 19 msecs calling init_pipe_fs+0x0/0x51 initcall init_pipe_fs+0x0/0x51 returned 0 after 0 msecs calling init_mnt_writers+0x0/0x95 initcall init_mnt_writers+0x0/0x95 returned 0 after 0 msecs calling eventpoll_init+0x0/0x9a initcall eventpoll_init+0x0/0x9a returned 0 after 0 msecs calling anon_inode_init+0x0/0x11c initcall anon_inode_init+0x0/0x11c returned 0 after 0 msecs calling acpi_rtc_init+0x0/0xf9 ACPI: RTC can wake from S4 initcall acpi_rtc_init+0x0/0xf9 returned 0 after 0 msecs calling acpi_event_init+0x0/0x85 initcall acpi_event_init+0x0/0x85 returned 0 after 2 msecs calling pnp_system_init+0x0/0x17 system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved system 00:07: ioport range 0x680-0x6ef has been reserved system 00:07: ioport range 0x800-0x80f has been reserved system 00:07: ioport range 0x810-0x817 has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x500-0x53f has been reserved system 00:07: ioport range 0x1640-0x164f has been reserved initcall pnp_system_init+0x0/0x17 returned 0 after 2 msecs calling chr_dev_init+0x0/0x9d initcall chr_dev_init+0x0/0x9d returned 0 after 2 msecs calling firmware_class_init+0x0/0x77 initcall firmware_class_init+0x0/0x77 returned 0 after 0 msecs calling loopback_init+0x0/0x17 initcall loopback_init+0x0/0x17 returned 0 after 1 msecs calling init_pcmcia_bus+0x0/0x89 initcall init_pcmcia_bus+0x0/0x89 returned 0 after 0 msecs calling cpufreq_gov_performance_init+0x0/0x17 initcall cpufreq_gov_performance_init+0x0/0x17 returned 0 after 0 msecs calling cpufreq_gov_userspace_init+0x0/0x17 initcall cpufreq_gov_userspace_init+0x0/0x17 returned 0 after 0 msecs calling init_acpi_pm_clocksource+0x0/0xae initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs calling pcibios_assign_resources+0x0/0x8d pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x3000-0x3fff pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff pci 0000:00:1c.0: PREFETCH window: 0x000000d8500000-0x000000d85fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 pci 0000:00:1c.2: IO window: 0x1000-0x1fff pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d3ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 pci 0000:00:1e.0: power state changed by ACPI to D0 PCI: Setting latency timer of device 0000:00:1e.0 to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [3000, 3fff] bus: 01 index 1 mmio: [d8300000, d83fffff] bus: 01 index 2 mmio: [c0000000, cfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [d8200000, d82fffff] bus: 02 index 2 mmio: [d8500000, d85fffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [d8100000, d81fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [1000, 1fff] bus: 04 index 1 mmio: [d4100000, d80fffff] bus: 04 index 2 mmio: [d0000000, d3ffffff] bus: 04 index 3 mmio: [0, 0] bus: 0c index 0 mmio: [0, 0] bus: 0c index 1 mmio: [d4000000, d40fffff] bus: 0c index 2 mmio: [0, 0] bus: 0c index 3 io port: [0, ffff] bus: 0c index 4 mmio: [0, ffffffffffffffff] initcall pcibios_assign_resources+0x0/0x8d returned 0 after 10 msecs calling inet_init+0x0/0x354 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered initcall inet_init+0x0/0x354 returned 0 after 39 msecs calling af_unix_init+0x0/0x5a NET: Registered protocol family 1 initcall af_unix_init+0x0/0x5a returned 0 after 0 msecs calling populate_rootfs+0x0/0xf3 checking if image is initramfs... it is debug: unmapping init memory ffff880037d35000..ffff880037ff0000 initcall populate_rootfs+0x0/0xf3 returned 0 after 262 msecs calling calgary_fixup_tce_spaces+0x0/0xfe initcall calgary_fixup_tce_spaces+0x0/0xfe returned -19 after 0 msecs calling i8259A_init_sysfs+0x0/0x27 initcall i8259A_init_sysfs+0x0/0x27 returned 0 after 0 msecs calling vsyscall_init+0x0/0x71 initcall vsyscall_init+0x0/0x71 returned 0 after 0 msecs calling sbf_init+0x0/0xf4 initcall sbf_init+0x0/0xf4 returned 0 after 0 msecs calling i8237A_init_sysfs+0x0/0x27 initcall i8237A_init_sysfs+0x0/0x27 returned 0 after 0 msecs calling add_rtc_cmos+0x0/0x1d initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs calling cache_sysfs_init+0x0/0x62 initcall cache_sysfs_init+0x0/0x62 returned 0 after 2 msecs calling mce_init_device+0x0/0x8a initcall mce_init_device+0x0/0x8a returned 0 after 1 msecs calling periodic_mcheck_init+0x0/0x44 initcall periodic_mcheck_init+0x0/0x44 returned 0 after 0 msecs calling thermal_throttle_init_device+0x0/0x92 initcall thermal_throttle_init_device+0x0/0x92 returned 0 after 0 msecs calling threshold_init_device+0x0/0x4e initcall threshold_init_device+0x0/0x4e returned 0 after 0 msecs calling msr_init+0x0/0x124 initcall msr_init+0x0/0x124 returned 0 after 0 msecs calling cpuid_init+0x0/0x124 initcall cpuid_init+0x0/0x124 returned 0 after 0 msecs calling init_lapic_sysfs+0x0/0x32 initcall init_lapic_sysfs+0x0/0x32 returned 0 after 0 msecs calling ioapic_init_sysfs+0x0/0xac initcall ioapic_init_sysfs+0x0/0xac returned 0 after 0 msecs calling add_pcspkr+0x0/0x45 initcall add_pcspkr+0x0/0x45 returned 0 after 0 msecs calling uv_ptc_init+0x0/0x7a initcall uv_ptc_init+0x0/0x7a returned 0 after 0 msecs calling uv_bau_init+0x0/0x604 initcall uv_bau_init+0x0/0x604 returned 0 after 0 msecs calling audit_classes_init+0x0/0xb4 initcall audit_classes_init+0x0/0xb4 returned 0 after 0 msecs calling debug_pagealloc_proc_init+0x0/0x30 initcall debug_pagealloc_proc_init+0x0/0x30 returned 0 after 0 msecs calling pt_dump_init+0x0/0x30 initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs calling init_vdso_vars+0x0/0x219 initcall init_vdso_vars+0x0/0x219 returned 0 after 0 msecs calling ia32_binfmt_init+0x0/0x19 initcall ia32_binfmt_init+0x0/0x19 returned 0 after 0 msecs calling sysenter_setup+0x0/0x2ad initcall sysenter_setup+0x0/0x2ad returned 0 after 0 msecs calling init_sched_debug_procfs+0x0/0x2c initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs calling create_proc_profile+0x0/0x2cf initcall create_proc_profile+0x0/0x2cf returned 0 after 0 msecs calling ioresources_init+0x0/0x41 initcall ioresources_init+0x0/0x41 returned 0 after 0 msecs calling uid_cache_init+0x0/0x92 initcall uid_cache_init+0x0/0x92 returned 0 after 0 msecs calling init_posix_timers+0x0/0xa0 initcall init_posix_timers+0x0/0xa0 returned 0 after 0 msecs calling init_posix_cpu_timers+0x0/0xb5 initcall init_posix_cpu_timers+0x0/0xb5 returned 0 after 0 msecs calling nsproxy_cache_init+0x0/0x32 initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 msecs calling timekeeping_init_device+0x0/0x27 initcall timekeeping_init_device+0x0/0x27 returned 0 after 0 msecs calling init_clocksource_sysfs+0x0/0x55 initcall init_clocksource_sysfs+0x0/0x55 returned 0 after 0 msecs calling init_timer_list_procfs+0x0/0x31 initcall init_timer_list_procfs+0x0/0x31 returned 0 after 0 msecs calling init_tstats_procfs+0x0/0x31 initcall init_tstats_procfs+0x0/0x31 returned 0 after 0 msecs calling lockdep_proc_init+0x0/0x7c initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 msecs calling futex_init+0x0/0xcc initcall futex_init+0x0/0xcc returned 0 after 0 msecs calling proc_dma_init+0x0/0x27 initcall proc_dma_init+0x0/0x27 returned 0 after 0 msecs calling percpu_modinit+0x0/0x79 initcall percpu_modinit+0x0/0x79 returned 0 after 0 msecs calling kallsyms_init+0x0/0x2a initcall kallsyms_init+0x0/0x2a returned 0 after 0 msecs calling snapshot_device_init+0x0/0x17 initcall snapshot_device_init+0x0/0x17 returned 0 after 0 msecs calling crash_save_vmcoreinfo_init+0x0/0x430 initcall crash_save_vmcoreinfo_init+0x0/0x430 returned 0 after 0 msecs calling crash_notes_memory_init+0x0/0x44 initcall crash_notes_memory_init+0x0/0x44 returned 0 after 0 msecs calling pid_namespaces_init+0x0/0x32 initcall pid_namespaces_init+0x0/0x32 returned 0 after 0 msecs calling audit_init+0x0/0x172 audit: initializing netlink socket (disabled) type=2000 audit(1216436777.860:1): initialized initcall audit_init+0x0/0x172 returned 0 after 0 msecs calling audit_tree_init+0x0/0x4e initcall audit_tree_init+0x0/0x4e returned 0 after 0 msecs calling init_kprobes+0x0/0x124 initcall init_kprobes+0x0/0x124 returned 0 after 4 msecs calling relay_init+0x0/0x19 initcall relay_init+0x0/0x19 returned 0 after 0 msecs calling utsname_sysctl_init+0x0/0x19 initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs calling init_lstats_procfs+0x0/0x2a initcall init_lstats_procfs+0x0/0x2a returned 0 after 0 msecs calling init_sched_switch_trace+0x0/0x41 initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs calling init_stack_trace+0x0/0x12 initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs calling init_function_trace+0x0/0x12 initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs calling init_irqsoff_tracer+0x0/0x14 initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 msecs calling init_wakeup_tracer+0x0/0x12 initcall init_wakeup_tracer+0x0/0x12 returned 0 after 0 msecs calling init_per_zone_pages_min+0x0/0x46 initcall init_per_zone_pages_min+0x0/0x46 returned 0 after 0 msecs calling pdflush_init+0x0/0x17 initcall pdflush_init+0x0/0x17 returned 0 after 0 msecs calling kswapd_init+0x0/0x7d initcall kswapd_init+0x0/0x7d returned 0 after 0 msecs calling setup_vmstat+0x0/0x4f initcall setup_vmstat+0x0/0x4f returned 0 after 0 msecs calling procswaps_init+0x0/0x27 initcall procswaps_init+0x0/0x27 returned 0 after 0 msecs calling hugetlb_init+0x0/0xa0 Total HugeTLB memory allocated, 0 initcall hugetlb_init+0x0/0xa0 returned 0 after 0 msecs calling init_tmpfs+0x0/0xdf initcall init_tmpfs+0x0/0xdf returned 0 after 0 msecs calling slab_sysfs_init+0x0/0xf5 initcall slab_sysfs_init+0x0/0xf5 returned 0 after 30 msecs calling fasync_init+0x0/0x2f initcall fasync_init+0x0/0x2f returned 0 after 0 msecs calling aio_setup+0x0/0x78 initcall aio_setup+0x0/0x78 returned 0 after 0 msecs calling inotify_setup+0x0/0x17 initcall inotify_setup+0x0/0x17 returned 0 after 0 msecs calling inotify_user_setup+0x0/0xbd initcall inotify_user_setup+0x0/0xbd returned 0 after 0 msecs calling init_sys32_ioctl+0x0/0x8a initcall init_sys32_ioctl+0x0/0x8a returned 0 after 0 msecs calling dquot_init+0x0/0x108 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0x108 returned 0 after 0 msecs calling init_v2_quota_format+0x0/0x17 initcall init_v2_quota_format+0x0/0x17 returned 0 after 0 msecs calling dnotify_init+0x0/0x2f initcall dnotify_init+0x0/0x2f returned 0 after 0 msecs calling vmcore_init+0x0/0x860 initcall vmcore_init+0x0/0x860 returned 0 after 0 msecs calling init_devpts_fs+0x0/0x44 initcall init_devpts_fs+0x0/0x44 returned 0 after 0 msecs calling init_ramfs_fs+0x0/0x17 initcall init_ramfs_fs+0x0/0x17 returned 0 after 0 msecs calling init_hugetlbfs_fs+0x0/0x9d initcall init_hugetlbfs_fs+0x0/0x9d returned 0 after 0 msecs calling init_iso9660_fs+0x0/0x76 initcall init_iso9660_fs+0x0/0x76 returned 0 after 0 msecs calling init_nls_cp437+0x0/0x17 initcall init_nls_cp437+0x0/0x17 returned 0 after 0 msecs calling init_nls_ascii+0x0/0x17 initcall init_nls_ascii+0x0/0x17 returned 0 after 0 msecs calling ipc_init+0x0/0x28 msgmni has been set to 5936 initcall ipc_init+0x0/0x28 returned 0 after 0 msecs calling ipc_sysctl_init+0x0/0x19 initcall ipc_sysctl_init+0x0/0x19 returned 0 after 0 msecs calling init_mqueue_fs+0x0/0xdb initcall init_mqueue_fs+0x0/0xdb returned 0 after 0 msecs calling key_proc_init+0x0/0x5e initcall key_proc_init+0x0/0x5e returned 0 after 0 msecs calling selinux_nf_ip_init+0x0/0x7f SELinux: Registering netfilter hooks initcall selinux_nf_ip_init+0x0/0x7f returned 0 after 0 msecs calling init_sel_fs+0x0/0x6d initcall init_sel_fs+0x0/0x6d returned 0 after 1 msecs calling selnl_init+0x0/0x52 initcall selnl_init+0x0/0x52 returned 0 after 0 msecs calling sel_netif_init+0x0/0x6b initcall sel_netif_init+0x0/0x6b returned 0 after 0 msecs calling sel_netnode_init+0x0/0x78 initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs calling sel_netport_init+0x0/0x78 initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs calling aurule_init+0x0/0x3c initcall aurule_init+0x0/0x3c returned 0 after 0 msecs calling crypto_algapi_init+0x0/0x12 initcall crypto_algapi_init+0x0/0x12 returned 0 after 0 msecs calling cryptomgr_init+0x0/0x17 initcall cryptomgr_init+0x0/0x17 returned 0 after 0 msecs calling hmac_module_init+0x0/0x17 initcall hmac_module_init+0x0/0x17 returned 0 after 0 msecs calling md5_mod_init+0x0/0x17 initcall md5_mod_init+0x0/0x17 returned 0 after 0 msecs calling sha1_generic_mod_init+0x0/0x17 initcall sha1_generic_mod_init+0x0/0x17 returned 0 after 0 msecs calling bsg_init+0x0/0x128 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) initcall bsg_init+0x0/0x128 returned 0 after 0 msecs calling noop_init+0x0/0x19 io scheduler noop registered initcall noop_init+0x0/0x19 returned 0 after 0 msecs calling as_init+0x0/0x19 io scheduler anticipatory registered initcall as_init+0x0/0x19 returned 0 after 0 msecs calling deadline_init+0x0/0x19 io scheduler deadline registered initcall deadline_init+0x0/0x19 returned 0 after 0 msecs calling cfq_init+0x0/0x99 io scheduler cfq registered (default) initcall cfq_init+0x0/0x99 returned 0 after 0 msecs calling debug_objects_init_debugfs+0x0/0x64 initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 msecs calling percpu_counter_startup+0x0/0x14 initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs calling pci_init+0x0/0x3a pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.2: Performing full reset pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.3: Performing full reset pci 0000:01:00.0: Boot video device initcall pci_init+0x0/0x3a returned 0 after 1 msecs calling pci_proc_init+0x0/0x70 initcall pci_proc_init+0x0/0x70 returned 0 after 0 msecs calling pcie_portdrv_init+0x0/0x52 PCI: Setting latency timer of device 0000:00:01.0 to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service PCI: Setting latency timer of device 0000:00:1c.0 to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service PCI: Setting latency timer of device 0000:00:1c.1 to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service PCI: Setting latency timer of device 0000:00:1c.2 to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service initcall pcie_portdrv_init+0x0/0x52 returned 0 after 7 msecs calling aer_service_init+0x0/0x25 initcall aer_service_init+0x0/0x25 returned 0 after 0 msecs calling pci_hotplug_init+0x0/0x22 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x22 returned 0 after 0 msecs calling fb_console_init+0x0/0x12b initcall fb_console_init+0x0/0x12b returned 0 after 0 msecs calling vesafb_init+0x0/0x23f initcall vesafb_init+0x0/0x23f returned 0 after 0 msecs calling efifb_init+0x0/0x1f2 initcall efifb_init+0x0/0x1f2 returned -19 after 0 msecs calling acpi_reserve_resources+0x0/0xf0 initcall acpi_reserve_resources+0x0/0xf0 returned 0 after 0 msecs calling acpi_button_init+0x0/0x63 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 ACPI: Sleep Button (CM) [SLPB] initcall acpi_button_init+0x0/0x63 returned 0 after 4 msecs calling acpi_fan_init+0x0/0x63 initcall acpi_fan_init+0x0/0x63 returned 0 after 0 msecs calling irqrouter_init_sysfs+0x0/0x3d initcall irqrouter_init_sysfs+0x0/0x3d returned 0 after 0 msecs calling acpi_processor_init+0x0/0x10f ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309) ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) initcall acpi_processor_init+0x0/0x10f returned 0 after 22 msecs calling acpi_container_init+0x0/0x47 initcall acpi_container_init+0x0/0x47 returned 0 after 17 msecs calling acpi_thermal_init+0x0/0x88 initcall acpi_thermal_init+0x0/0x88 returned 0 after 0 msecs calling rand_initialize+0x0/0x31 initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs calling tty_init+0x0/0x1ca initcall tty_init+0x0/0x1ca returned 0 after 29 msecs calling pty_init+0x0/0x278 initcall pty_init+0x0/0x278 returned 0 after 0 msecs calling hpet_init+0x0/0x6f hpet_resources: 0xfed00000 is busy initcall hpet_init+0x0/0x6f returned 0 after 1 msecs calling nvram_init+0x0/0x8f Non-volatile memory driver v1.2 initcall nvram_init+0x0/0x8f returned 0 after 0 msecs calling agp_init+0x0/0x2b Linux agpgart interface v0.103 initcall agp_init+0x0/0x2b returned 0 after 0 msecs calling agp_intel_init+0x0/0x2e initcall agp_intel_init+0x0/0x2e returned 0 after 0 msecs calling agp_sis_init+0x0/0x2e initcall agp_sis_init+0x0/0x2e returned 0 after 0 msecs calling agp_via_init+0x0/0x2e initcall agp_via_init+0x0/0x2e returned 0 after 0 msecs calling cn_proc_init+0x0/0x42 initcall cn_proc_init+0x0/0x42 returned 0 after 0 msecs calling serial8250_init+0x0/0x148 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled initcall serial8250_init+0x0/0x148 returned 0 after 2 msecs calling serial8250_pnp_init+0x0/0x17 initcall serial8250_pnp_init+0x0/0x17 returned 0 after 0 msecs calling serial8250_pci_init+0x0/0x20 initcall serial8250_pci_init+0x0/0x20 returned 0 after 0 msecs calling init_kgdboc+0x0/0x1b initcall init_kgdboc+0x0/0x1b returned 0 after 0 msecs calling topology_sysfs_init+0x0/0x5e initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 msecs calling brd_init+0x0/0x172 brd: module loaded initcall brd_init+0x0/0x172 returned 0 after 11 msecs calling init_kgdbts+0x0/0x1b initcall init_kgdbts+0x0/0x1b returned 0 after 0 msecs calling net_olddevs_init+0x0/0xa3 initcall net_olddevs_init+0x0/0xa3 returned 0 after 0 msecs calling mac_hid_init+0x0/0xd7 input: Macintosh mouse button emulation as /devices/virtual/input/input4 initcall mac_hid_init+0x0/0xd7 returned 0 after 0 msecs calling init_sd+0x0/0xfd Driver 'sd' needs updating - please use bus_type methods initcall init_sd+0x0/0xfd returned 0 after 0 msecs calling init_sg+0x0/0x145 initcall init_sg+0x0/0x145 returned 0 after 0 msecs calling nonstatic_sysfs_init+0x0/0x17 initcall nonstatic_sysfs_init+0x0/0x17 returned 0 after 0 msecs calling yenta_socket_init+0x0/0x20 initcall yenta_socket_init+0x0/0x20 returned 0 after 0 msecs calling mon_init+0x0/0x11c initcall mon_init+0x0/0x11c returned 0 after 0 msecs calling i8042_init+0x0/0x371 PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. initcall i8042_init+0x0/0x371 returned -19 after 2 msecs calling serport_init+0x0/0x39 initcall serport_init+0x0/0x39 returned 0 after 0 msecs calling mousedev_init+0x0/0x67 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x67 returned 0 after 4 msecs calling evdev_init+0x0/0x17 initcall evdev_init+0x0/0x17 returned 0 after 21 msecs calling atkbd_init+0x0/0x2c initcall atkbd_init+0x0/0x2c returned 0 after 0 msecs calling psmouse_init+0x0/0x78 initcall psmouse_init+0x0/0x78 returned 0 after 0 msecs calling cmos_init+0x0/0x35 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k initcall cmos_init+0x0/0x35 returned 0 after 1 msecs calling init_ladder+0x0/0x17 cpuidle: using governor ladder initcall init_ladder+0x0/0x17 returned 0 after 2 msecs calling init_menu+0x0/0x17 cpuidle: using governor menu initcall init_menu+0x0/0x17 returned 0 after 4 msecs calling efivars_init+0x0/0x1f5 initcall efivars_init+0x0/0x1f5 returned -19 after 0 msecs calling hid_init+0x0/0x10 initcall hid_init+0x0/0x10 returned 0 after 0 msecs calling hid_init+0x0/0x67 Marking TSC unstable due to TSC halts in idle usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0x67 returned 0 after 1 msecs calling sysctl_core_init+0x0/0x17 initcall sysctl_core_init+0x0/0x17 returned 0 after 0 msecs calling flow_cache_init+0x0/0x1ca initcall flow_cache_init+0x0/0x1ca returned 0 after 0 msecs calling llc_init+0x0/0x25 initcall llc_init+0x0/0x25 returned 0 after 0 msecs calling snap_init+0x0/0x36 initcall snap_init+0x0/0x36 returned 0 after 0 msecs calling rif_init+0x0/0x9a initcall rif_init+0x0/0x9a returned 0 after 0 msecs calling blackhole_module_init+0x0/0x17 initcall blackhole_module_init+0x0/0x17 returned 0 after 0 msecs calling sysctl_ipv4_init+0x0/0x53 initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 1 msecs calling init_syncookies+0x0/0x1e initcall init_syncookies+0x0/0x1e returned 0 after 0 msecs calling ipv4_netfilter_init+0x0/0x17 initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs calling cubictcp_register+0x0/0x6a TCP cubic registered initcall cubictcp_register+0x0/0x6a returned 0 after 0 msecs calling xfrm_user_init+0x0/0x5e Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x5e returned 0 after 0 msecs calling packet_init+0x0/0x4c NET: Registered protocol family 17 initcall packet_init+0x0/0x4c returned 0 after 0 msecs calling hpet_insert_resource+0x0/0x28 initcall hpet_insert_resource+0x0/0x28 returned 0 after 0 msecs calling update_mp_table+0x0/0x61b initcall update_mp_table+0x0/0x61b returned 0 after 0 msecs calling lapic_insert_resource+0x0/0x45 initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 msecs calling init_lapic_nmi_sysfs+0x0/0x3d initcall init_lapic_nmi_sysfs+0x0/0x3d returned 0 after 0 msecs calling ioapic_insert_resources+0x0/0x54 initcall ioapic_insert_resources+0x0/0x54 returned 0 after 0 msecs calling check_early_ioremap_leak+0x0/0x49 initcall check_early_ioremap_leak+0x0/0x49 returned 0 after 0 msecs calling sched_init_debug+0x0/0x24 initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs calling init_oops_id+0x0/0x28 initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs calling disable_boot_consoles+0x0/0x3f initcall disable_boot_consoles+0x0/0x3f returned 0 after 0 msecs calling pm_qos_power_init+0x0/0xcf initcall pm_qos_power_init+0x0/0xcf returned 0 after 0 msecs calling software_resume+0x0/0x1ba initcall software_resume+0x0/0x1ba returned -2 after 0 msecs initcall software_resume+0x0/0x1ba returned with error code -2 calling debugfs_kprobe_init+0x0/0x8e initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 0 msecs calling taskstats_init+0x0/0x9a registered taskstats version 1 initcall taskstats_init+0x0/0x9a returned 0 after 0 msecs calling fail_page_alloc_debugfs+0x0/0xe9 initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 msecs calling fail_make_request_debugfs+0x0/0x1e initcall fail_make_request_debugfs+0x0/0x1e returned 0 after 0 msecs calling random32_reseed+0x0/0x7e initcall random32_reseed+0x0/0x7e returned 0 after 0 msecs calling pci_sysfs_init+0x0/0x51 initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 msecs calling acpi_wakeup_device_init+0x0/0xb6 initcall acpi_wakeup_device_init+0x0/0xb6 returned 0 after 0 msecs calling acpi_sleep_proc_init+0x0/0x5a initcall acpi_sleep_proc_init+0x0/0x5a returned 0 after 0 msecs calling seqgen_init+0x0/0x14 initcall seqgen_init+0x0/0x14 returned 0 after 0 msecs calling late_resume_init+0x0/0x112 Magic number: 0:812:108 initcall late_resume_init+0x0/0x112 returned 0 after 0 msecs calling scsi_complete_async_scans+0x0/0xf4 initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 0 msecs calling memmap_init+0x0/0x9d initcall memmap_init+0x0/0x9d returned 0 after 0 msecs calling pci_mmcfg_late_insert_resources+0x0/0x48 initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned 0 after 0 msecs calling tcp_congestion_default+0x0/0x17 initcall tcp_congestion_default+0x0/0x17 returned 0 after 0 msecs debug: unmapping init memory ffffffff814eb000..ffffffff8166d000 Write protecting the kernel read-only data: 1368k ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub Clocksource tsc unstable (delta = -305979950 ns) hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s modprobe used greatest stack depth: 3792 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 80 td 96 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: port 2 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s drivers/usb/core/inode.c: creating file '001' usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.3: Performing full reset uhci_hcd 0000:00:1d.3: supports USB remote wakeup uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: port 4 high speed ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT usb 1-4: new high speed USB device using ehci_hcd and address 3 drivers/usb/core/inode.c: creating file '001' usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 modprobe used greatest stack depth: 3744 bytes left ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ehci_hcd 0000:00:1d.7: port 4 high speed ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 usb 1-4: uevent usb 1-4: usb_probe_device usb 1-4: configuration #1 chosen from 1 choice usb 1-4: adding 1-4:1.0 (config #1, interface 0) usb 1-4:1.0: uevent drivers/usb/core/inode.c: creating file '003' usb 1-4: New USB device found, idVendor=05ac, idProduct=8300 usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s ata1.00: ATAPI: MATSHITADVD-R UJ-85J, FAV1, max UDMA/66 ata1.00: configured for UDMA/66 hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:1d.7: port 6 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 6 not reset yet, waiting 50ms ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s isa bounce pool size: 16 pages scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5 scsi 0:0:0:0: Attached scsi generic sg0 type 5 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:1d.7: port 7 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 7 not reset yet, waiting 50ms ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00 hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100 ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4) ata3.01: configured for UDMA/100 usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 2-2: ep0 maxpacket = 8 usb 2-2: USB quirks for this device: 2 scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5 sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 2:0:1:0: [sda] Write Protect is off sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 2:0:1:0: [sda] Write Protect is off sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<7>usb 2-2: skipped 1 descriptor after interface usb 2-2: skipped 1 descriptor after interface usb 2-2: skipped 1 descriptor after interface usb 2-2: default language 0x0409 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent usbhid 2-2:1.0: usb_probe_interface usbhid 2-2:1.0: usb_probe_interface - got id input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 usb 2-2: adding 2-2:1.1 (config #1, interface 1) usb 2-2:1.1: uevent usbhid 2-2:1.1: usb_probe_interface usbhid 2-2:1.1: usb_probe_interface - got id usb 2-2: adding 2-2:1.2 (config #1, interface 2) usb 2-2:1.2: uevent usbhid 2-2:1.2: usb_probe_interface usbhid 2-2:1.2: usb_probe_interface - got id input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6 uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us sda1 sda2 sda3 sda4 sda5 input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 sd 2:0:1:0: [sda] Attached SCSI disk sd 2:0:1:0: Attached scsi generic sg1 type 0 modprobe used greatest stack depth: 2304 bytes left drivers/usb/core/inode.c: creating file '002' usb 2-2: New USB device found, idVendor=05ac, idProduct=021a usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Apple Internal Keyboard / Trackpad usb 2-2: Manufacturer: Apple Computer hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00 hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00 hub 4-0:1.0: port 2, status 0101, change 0003, 12 Mb/s hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: ep0 maxpacket = 8 usb 4-2: skipped 1 descriptor after interface usb 4-2: default language 0x0409 usb 4-2: uevent usb 4-2: usb_probe_device usb 4-2: configuration #1 chosen from 1 choice usb 4-2: adding 4-2:1.0 (config #1, interface 0) usb 4-2:1.0: uevent usbhid 4-2:1.0: usb_probe_interface usbhid 4-2:1.0: usb_probe_interface - got id drivers/usb/core/file.c: looking for a minor, starting at 96 hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 drivers/usb/core/inode.c: creating file '002' usb 4-2: New USB device found, idVendor=05ac, idProduct=8240 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: IR Receiver usb 4-2: Manufacturer: Apple Computer, Inc. hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00 hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: skipped 1 descriptor after interface usb 5-1: skipped 1 descriptor after interface usb 5-1: uevent usb 5-1: usb_probe_device usb 5-1: configuration #1 chosen from 1 choice usb 5-1: adding 5-1:1.0 (config #1, interface 0) usb 5-1:1.0: uevent usbhid 5-1:1.0: usb_probe_interface usbhid 5-1:1.0: usb_probe_interface - got id input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 usb 5-1: adding 5-1:1.1 (config #1, interface 1) usb 5-1:1.1: uevent usbhid 5-1:1.1: usb_probe_interface usbhid 5-1:1.1: usb_probe_interface - got id input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8 input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 drivers/usb/core/inode.c: creating file '002' usb 5-1: New USB device found, idVendor=05ac, idProduct=1000 usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 usb usb3: suspend_rh (auto-stop) hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend usb usb3: suspend_rh kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. type=1404 audit(1216436785.373:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 171021 rules. SELinux: 8192 avtab hash slots, 171021 rules. SELinux: 8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats SELinux: 72 classes, 171021 rules SELinux: permission open in class dir not defined in policy SELinux: permission open in class file not defined in policy SELinux: permission open in class chr_file not defined in policy SELinux: permission open in class blk_file not defined in policy SELinux: permission open in class fifo_file not defined in policy SELinux: the above unknown classes and permissions will be allowed SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda5, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1216436786.249:3): policy loaded auid=4294967295 ses=4294967295 usb usb2: uevent usb 2-0:1.0: uevent usb 2-2: uevent usb 2-2:1.0: uevent usb 2-2:1.1: uevent usb 2-2:1.2: uevent usb usb3: uevent usb 3-0:1.0: uevent usb usb4: uevent usb 4-0:1.0: uevent usb 4-2: uevent usb 4-2:1.0: uevent usb usb5: uevent usb 5-0:1.0: uevent usb 5-1: uevent usb 5-1:1.0: uevent usb 5-1:1.1: uevent usb usb1: uevent usb 1-0:1.0: uevent usb 1-4: uevent usb 1-4:1.0: uevent appletouch 2-2:1.1: usb_probe_interface appletouch 2-2:1.1: usb_probe_interface - got id appletouch: Geyser mode initialized. input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9 usbcore: registered new interface driver appletouch intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 ath5k_pci 0000:03:00.0: registered as 'phy0' ath5k phy0: Device not yet supported. ath5k_pci 0000:03:00.0: PCI INT A disabled ACPI: AC Adapter [ADP1] (on-line) ath_hal: module license 'Proprietary' taints kernel. AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) ACPI: Battery Slot [BAT0] (battery present) Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 input: PC Speaker as /devices/platform/pcspkr/input/input10 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf] ACPI: Device needs an ACPI driver isight_firmware 1-4:1.0: usb_probe_interface isight_firmware 1-4:1.0: usb_probe_interface - got id firmware: requesting isight.fw input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input11 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 0000:02:00.0: v1.21 addr 0xd8200000 irq 16 Yukon-EC (0xb6) rev 2 sky2 eth0: addr 00:17:f2:d1:e0:6f Unable to load isight firmware usbcore: registered new interface driver isight_firmware firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10 firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800 ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 MadWifi: ath_attach: Switching rfkill capability off. wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0) ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions [drm] Initialized drm 1.1.0 20060810 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 [drm] Initialized radeon 1.29.0 20080528 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us appletouch: incomplete data package (first byte: 2, length: 4). uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a firmware: requesting intel-ucode/06-0f-06 firmware: requesting intel-ucode/06-0f-06 ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9) SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts usb usb3: usb auto-resume usb usb3: wakeup_rh hub 3-0:1.0: hub_resume hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 usb usb3: suspend_rh (auto-stop) uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend usb usb3: suspend_rh Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us [drm] Num pipes: 1 [drm] Setting GART location based on new memory map [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us ath0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us SELinux: initialized (dev fuse, type fuse), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us On Fri, Jul 18, 2008 at 06:22:08PM -0700, Yinghai Lu wrote: > On Fri, Jul 18, 2008 at 5:58 PM, Jack Howarth wrote: > > YH, > > The patch you posted did not apply cleanly to tonight's or last night's linus kernel git. > > I had to correct it by hand and this is what I applied... > > it should apply cleanly to linus tree too. > > please check the patch i sent out before and addon fix patch > > YH > [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved > > for MacBookPro2 > > change the mconf bus range from [0,0xff] to to [0, 0x3f] > to match range [0xf0000000, 0xf4000000) in e820 tables. > > Signed-off-by: Yinghai Lu > > --- > arch/x86/pci/mmconfig-shared.c | 64 ++++++++++++++++++++++++++++++----------- > 1 file changed, 47 insertions(+), 17 deletions(-) > > Index: linux-2.6/arch/x86/pci/mmconfig-shared.c > =================================================================== > --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c > +++ linux-2.6/arch/x86/pci/mmconfig-shared.c > @@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re > return AE_OK; > } > > -static int __init is_acpi_reserved(unsigned long start, unsigned long end) > +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used) > { > struct resource mcfg_res; > > @@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig > return mcfg_res.flags; > } > > +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type); > + > +static int __init is_mmconf_reserved(check_reserved_t is_reserved, > + u64 addr, u64 size, int i, > + typeof(pci_mmcfg_config[0]) *cfg, int with_e820) > +{ > + u64 old_size = size; > + int valid = 0; > + > + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) { > + size >>= 1; > + if (size < (16UL<<20)) > + break; > + } > + > + if (size >= (16UL<<20) || size == old_size) { > + printk(KERN_NOTICE > + "PCI: MCFG area at %Lx reserved in %s\n", > + addr, with_e820?"E820":"ACPI motherboard resources"); > + valid = 1; > + > + if (old_size != size) { > + /* update end_bus_number */ > + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1); > + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx " > + "segment %hu buses %u - %u\n", > + i, (unsigned long)cfg->address, cfg->pci_segment, > + (unsigned int)cfg->start_bus_number, > + (unsigned int)cfg->end_bus_number); > + } > + } > + > + return valid; > +} > + > static void __init pci_mmcfg_reject_broken(int early) > { > typeof(pci_mmcfg_config[0]) *cfg; > @@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok > > for (i = 0; i < pci_mmcfg_config_num; i++) { > int valid = 0; > - u32 size = (cfg->end_bus_number + 1) << 20; > + u64 addr, size; > + > cfg = &pci_mmcfg_config[i]; > + addr = cfg->start_bus_number; > + addr <<= 20; > + size = cfg->end_bus_number + 1 - cfg->start_bus_number; > + size <<= 20; > printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx " > "segment %hu buses %u - %u\n", > i, (unsigned long)cfg->address, cfg->pci_segment, > (unsigned int)cfg->start_bus_number, > (unsigned int)cfg->end_bus_number); > > - if (!early && > - is_acpi_reserved(cfg->address, cfg->address + size - 1)) { > - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved " > - "in ACPI motherboard resources\n", > - cfg->address); > - valid = 1; > - } > + if (!early) > + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0); > > if (valid) > continue; > @@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok > printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" > " reserved in ACPI motherboard resources\n", > cfg->address); > + > /* Don't try to do this check unless configuration > type 1 is available. how about type 2 ?*/ > - if (raw_pci_ops && e820_all_mapped(cfg->address, > - cfg->address + size - 1, > - E820_RESERVED)) { > - printk(KERN_NOTICE > - "PCI: MCFG area at %Lx reserved in E820\n", > - cfg->address); > - valid = 1; > - } > + if (raw_pci_ops) > + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1); > > if (!valid) > goto reject; > [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved > > Signed-off-by: Yinghai Lu > > diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c > index 9297882..429c701 100644 > --- a/arch/x86/pci/mmconfig-shared.c > +++ b/arch/x86/pci/mmconfig-shared.c > @@ -364,6 +364,7 @@ static void __init pci_mmcfg_reject_broken(int early) > cfg = &pci_mmcfg_config[i]; > addr = cfg->start_bus_number; > addr <<= 20; > + addr += cfg->address; > size = cfg->end_bus_number + 1 - cfg->start_bus_number; > size <<= 20; > printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx " -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/